blob: 9494400e8fd0baea0723cb7ccf78d37535cd279e [file] [log] [blame]
#
# Misc strange devices
#
menuconfig MISC_DEVICES
bool "Misc devices"
default y
---help---
Say Y here to get to see options for device drivers from various
different categories. This option alone does not add any kernel code.
If you say N, all options in this submenu will be skipped and disabled.
if MISC_DEVICES
config ATMEL_PWM
tristate "Atmel AT32/AT91 PWM support"
depends on AVR32 || ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || ARCH_AT91CAP9
help
This option enables device driver support for the PWM channels
on certain Atmel prcoessors. Pulse Width Modulation is used for
purposes including software controlled power-efficent backlights
on LCD displays, motor control, and waveform generation.
config ATMEL_TCLIB
bool "Atmel AT32/AT91 Timer/Counter Library"
depends on (AVR32 || ARCH_AT91)
help
Select this if you want a library to allocate the Timer/Counter
blocks found on many Atmel processors. This facilitates using
these blocks by different drivers despite processor differences.
config ATMEL_TCB_CLKSRC
bool "TC Block Clocksource"
depends on ATMEL_TCLIB && GENERIC_TIME
default y
help
Select this to get a high precision clocksource based on a
TC block with a 5+ MHz base clock rate. Two timer channels
are combined to make a single 32-bit timer.
When GENERIC_CLOCKEVENTS is defined, the third timer channel
may be used as a clock event device supporting oneshot mode
(delays of up to two seconds) based on the 32 KiHz clock.
config ATMEL_TCB_CLKSRC_BLOCK
int
depends on ATMEL_TCB_CLKSRC
prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
default 0
range 0 1
help
Some chips provide more than one TC block, so you have the
choice of which one to use for the clock framework. The other
TC can be used for other purposes, such as PWM generation and
interval timing.
config IBM_ASM
tristate "Device driver for IBM RSA service processor"
depends on X86 && PCI && INPUT && EXPERIMENTAL
---help---
This option enables device driver support for in-band access to the
IBM RSA (Condor) service processor in eServer xSeries systems.
The ibmasm device driver allows user space application to access
ASM (Advanced Systems Management) functions on the service
processor. The driver is meant to be used in conjunction with
a user space API.
The ibmasm driver also enables the OS to use the UART on the
service processor board as a regular serial port. To make use of
this feature serial driver support (CONFIG_SERIAL_8250) must be
enabled.
WARNING: This software may not be supported or function
correctly on your IBM server. Please consult the IBM ServerProven
website <http://www.pc.ibm.com/ww/eserver/xseries/serverproven> for
information on the specific driver level and support statement
for your IBM server.
config PHANTOM
tristate "Sensable PHANToM (PCI)"
depends on PCI
help
Say Y here if you want to build a driver for Sensable PHANToM device.
This driver is only for PCI PHANToMs.
If you choose to build module, its name will be phantom. If unsure,
say N here.
config EEPROM_93CX6
tristate "EEPROM 93CX6 support"
---help---
This is a driver for the EEPROM chipsets 93c46 and 93c66.
The driver supports both read as well as write commands.
If unsure, say N.
config SGI_IOC4
tristate "SGI IOC4 Base IO support"
depends on PCI
---help---
This option enables basic support for the IOC4 chip on certain
SGI IO controller cards (IO9, IO10, and PCI-RT). This option
does not enable any specific functions on such a card, but provides
necessary infrastructure for other drivers to utilize.
If you have an SGI Altix with an IOC4-based card say Y.
Otherwise say N.
config TIFM_CORE
tristate "TI Flash Media interface support (EXPERIMENTAL)"
depends on EXPERIMENTAL && PCI
help
If you want support for Texas Instruments(R) Flash Media adapters
you should select this option and then also choose an appropriate
host adapter, such as 'TI Flash Media PCI74xx/PCI76xx host adapter
support', if you have a TI PCI74xx compatible card reader, for
example.
You will also have to select some flash card format drivers. MMC/SD
cards are supported via 'MMC/SD Card support: TI Flash Media MMC/SD
Interface support (MMC_TIFM_SD)'.
To compile this driver as a module, choose M here: the module will
be called tifm_core.
config TIFM_7XX1
tristate "TI Flash Media PCI74xx/PCI76xx host adapter support (EXPERIMENTAL)"
depends on PCI && TIFM_CORE && EXPERIMENTAL
default TIFM_CORE
help
This option enables support for Texas Instruments(R) PCI74xx and
PCI76xx families of Flash Media adapters, found in many laptops.
To make actual use of the device, you will have to select some
flash card format drivers, as outlined in the TIFM_CORE Help.
To compile this driver as a module, choose M here: the module will
be called tifm_7xx1.
config ACER_WMI
tristate "Acer WMI Laptop Extras (EXPERIMENTAL)"
depends on X86
depends on EXPERIMENTAL
depends on ACPI
depends on LEDS_CLASS
depends on NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
depends on SERIO_I8042
depends on RFKILL
select ACPI_WMI
---help---
This is a driver for newer Acer (and Wistron) laptops. It adds
wireless radio and bluetooth control, and on some laptops,
exposes the mail LED and LCD backlight.
For more information about this driver see
<file:Documentation/laptops/acer-wmi.txt>
If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
here.
config ASUS_LAPTOP
tristate "Asus Laptop Extras (EXPERIMENTAL)"
depends on X86
depends on ACPI
depends on EXPERIMENTAL && !ACPI_ASUS
depends on LEDS_CLASS
depends on NEW_LEDS
depends on BACKLIGHT_CLASS_DEVICE
---help---
This is the new Linux driver for Asus laptops. It may also support some
MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
standard ACPI events that go through /proc/acpi/events. It also adds
support for video output switching, LCD backlight control, Bluetooth and
Wlan control, and most importantly, allows you to blink those fancy LEDs.
For more information and a userspace daemon for handling the extra
buttons see <http://acpi4asus.sf.net/>.
If you have an ACPI-compatible ASUS laptop, say Y or M here.
config FUJITSU_LAPTOP
tristate "Fujitsu Laptop Extras"
depends on X86
depends on ACPI
depends on INPUT
depends on BACKLIGHT_CLASS_DEVICE
---help---
This is a driver for laptops built by Fujitsu:
* P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
* Possibly other Fujitsu laptop models
* Tested with S6410 and S7020
It adds support for LCD brightness control and some hotkeys.
If you have a Fujitsu laptop, say Y or M here.
config FUJITSU_LAPTOP_DEBUG
bool "Verbose debug mode for Fujitsu Laptop Extras"
depends on FUJITSU_LAPTOP
default n
---help---
Enables extra debug output from the fujitsu extras driver, at the
expense of a slight increase in driver size.
If you are not sure, say N here.
config TC1100_WMI
tristate "HP Compaq TC1100 Tablet WMI Extras (EXPERIMENTAL)"
depends on X86 && !X86_64
depends on EXPERIMENTAL
depends on ACPI
select ACPI_WMI
---help---
This is a driver for the WMI extensions (wireless and bluetooth power
control) of the HP Compaq TC1100 tablet.
config HP_WMI
tristate "HP WMI extras"
depends on ACPI_WMI
depends on INPUT
depends on RFKILL
help
Say Y here if you want to support WMI-based hotkeys on HP laptops and
to read data from WMI such as docking or ambient light sensor state.
To compile this driver as a module, choose M here: the module will
be called hp-wmi.
config MSI_LAPTOP
tristate "MSI Laptop Extras"
depends on X86
depends on ACPI_EC
depends on BACKLIGHT_CLASS_DEVICE
---help---
This is a driver for laptops built by MSI (MICRO-STAR
INTERNATIONAL):
MSI MegaBook S270 (MS-1013)
Cytron/TCM/Medion/Tchibo MD96100/SAM2000
It adds support for Bluetooth, WLAN and LCD brightness control.
More information about this driver is available at
<http://0pointer.de/lennart/tchibo.html>.
If you have an MSI S270 laptop, say Y or M here.
config PANASONIC_LAPTOP
tristate "Panasonic Laptop Extras"
depends on X86 && INPUT && ACPI
depends on BACKLIGHT_CLASS_DEVICE
---help---
This driver adds support for access to backlight control and hotkeys
on Panasonic Let's Note laptops.
If you have a Panasonic Let's note laptop (such as the R1(N variant),
R2, R3, R5, T2, W2 and Y2 series), say Y.
config COMPAL_LAPTOP
tristate "Compal Laptop Extras"
depends on X86
depends on ACPI_EC
depends on BACKLIGHT_CLASS_DEVICE
---help---
This is a driver for laptops built by Compal:
Compal FL90/IFL90
Compal FL91/IFL91
Compal FL92/JFL92
Compal FT00/IFT00
It adds support for Bluetooth, WLAN and LCD brightness control.
If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here.
config SONY_LAPTOP
tristate "Sony Laptop Extras"
depends on X86 && ACPI
select BACKLIGHT_CLASS_DEVICE
depends on INPUT
---help---
This mini-driver drives the SNC and SPIC devices present in the ACPI
BIOS of the Sony Vaio laptops.
It gives access to some extra laptop functionalities like Bluetooth,
screen brightness control, Fn keys and allows powering on/off some
devices.
Read <file:Documentation/laptops/sony-laptop.txt> for more information.
config SONYPI_COMPAT
bool "Sonypi compatibility"
depends on SONY_LAPTOP
---help---
Build the sonypi driver compatibility code into the sony-laptop driver.
config THINKPAD_ACPI
tristate "ThinkPad ACPI Laptop Extras"
depends on X86 && ACPI
select BACKLIGHT_LCD_SUPPORT
select BACKLIGHT_CLASS_DEVICE
select HWMON
select NVRAM
select INPUT
select NEW_LEDS
select LEDS_CLASS
select NET
select RFKILL
---help---
This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
support for Fn-Fx key combinations, Bluetooth control, video
output switching, ThinkLight control, UltraBay eject and more.
For more information about this driver see
<file:Documentation/laptops/thinkpad-acpi.txt> and
<http://ibm-acpi.sf.net/> .
This driver was formerly known as ibm-acpi.
If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
config THINKPAD_ACPI_DEBUG
bool "Verbose debug mode"
depends on THINKPAD_ACPI
default n
---help---
Enables extra debugging information, at the expense of a slightly
increase in driver size.
If you are not sure, say N here.
config THINKPAD_ACPI_DOCK
bool "Legacy Docking Station Support"
depends on THINKPAD_ACPI
depends on ACPI_DOCK=n
default n
---help---
Allows the thinkpad_acpi driver to handle docking station events.
This support was made obsolete by the generic ACPI docking station
support (CONFIG_ACPI_DOCK). It will allow locking and removing the
laptop from the docking station, but will not properly connect PCI
devices.
If you are not sure, say N here.
config THINKPAD_ACPI_BAY
bool "Legacy Removable Bay Support"
depends on THINKPAD_ACPI
default y
---help---
Allows the thinkpad_acpi driver to handle removable bays. It will
electrically disable the device in the bay, and also generate
notifications when the bay lever is ejected or inserted.
If you are not sure, say Y here.
config THINKPAD_ACPI_VIDEO
bool "Video output control support"
depends on THINKPAD_ACPI
default y
---help---
Allows the thinkpad_acpi driver to provide an interface to control
the various video output ports.
This feature often won't work well, depending on ThinkPad model,
display state, video output devices in use, whether there is a X
server running, phase of the moon, and the current mood of
Schroedinger's cat. If you can use X.org's RandR to control
your ThinkPad's video output ports instead of this feature,
don't think twice: do it and say N here to save some memory.
If you are not sure, say Y here.
config THINKPAD_ACPI_HOTKEY_POLL
bool "Support NVRAM polling for hot keys"
depends on THINKPAD_ACPI
default y
---help---
Some thinkpad models benefit from NVRAM polling to detect a few of
the hot key press events. If you know your ThinkPad model does not
need to do NVRAM polling to support any of the hot keys you use,
unselecting this option will save about 1kB of memory.
ThinkPads T40 and newer, R52 and newer, and X31 and newer are
unlikely to need NVRAM polling in their latest BIOS versions.
NVRAM polling can detect at most the following keys: ThinkPad/Access
IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
If you are not sure, say Y here. The driver enables polling only if
it is strictly necessary to do so.
config ATMEL_SSC
tristate "Device driver for Atmel SSC peripheral"
depends on AVR32 || ARCH_AT91
---help---
This option enables device driver support for Atmel Syncronized
Serial Communication peripheral (SSC).
The SSC peripheral supports a wide variety of serial frame based
communications, i.e. I2S, SPI, etc.
If unsure, say N.
config INTEL_MENLOW
tristate "Thermal Management driver for Intel menlow platform"
depends on ACPI_THERMAL
select THERMAL
depends on X86
---help---
ACPI thermal management enhancement driver on
Intel Menlow platform.
If unsure, say N.
config EEEPC_LAPTOP
tristate "Eee PC Hotkey Driver (EXPERIMENTAL)"
depends on X86
depends on ACPI
depends on BACKLIGHT_CLASS_DEVICE
depends on HWMON
depends on EXPERIMENTAL
depends on RFKILL
---help---
This driver supports the Fn-Fx keys on Eee PC laptops.
It also adds the ability to switch camera/wlan on/off.
If you have an Eee PC laptop, say Y or M here.
config ENCLOSURE_SERVICES
tristate "Enclosure Services"
default n
help
Provides support for intelligent enclosures (bays which
contain storage devices). You also need either a host
driver (SCSI/ATA) which supports enclosures
or a SCSI enclosure device (SES) to use these services.
config SGI_XP
tristate "Support communication between SGI SSIs"
depends on NET
depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP
select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2
select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP
---help---
An SGI machine can be divided into multiple Single System
Images which act independently of each other and have
hardware based memory protection from the others. Enabling
this feature will allow for direct communication between SSIs
based on a network adapter and DMA messaging.
config HP_ILO
tristate "Channel interface driver for HP iLO/iLO2 processor"
depends on PCI
default n
help
The channel interface driver allows applications to communicate
with iLO/iLO2 management processors present on HP ProLiant
servers. Upon loading, the driver creates /dev/hpilo/dXccbN files,
which can be used to gather data from the management processor,
via read and write system calls.
To compile this driver as a module, choose M here: the
module will be called hpilo.
config SGI_GRU
tristate "SGI GRU driver"
depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP
default n
select MMU_NOTIFIER
---help---
The GRU is a hardware resource located in the system chipset. The GRU
contains memory that can be mmapped into the user address space. This memory is
used to communicate with the GRU to perform functions such as load/store,
scatter/gather, bcopy, AMOs, etc. The GRU is directly accessed by user
instructions using user virtual addresses. GRU instructions (ex., bcopy) use
user virtual addresses for operands.
If you are not running on a SGI UV system, say N.
config SGI_GRU_DEBUG
bool "SGI GRU driver debug"
depends on SGI_GRU
default n
---help---
This option enables addition debugging code for the SGI GRU driver. If
you are unsure, say N.
endif # MISC_DEVICES