blob: bd9eeb43ed0e1bd86a365322374ae9b9cfdfe25c [file] [log] [blame]
/*
* Copyright (C) 2001,2002,2004 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/smp.h>
#include <linux/kernel_stat.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/fw/cfe/cfe_api.h>
#include <asm/sibyte/sb1250.h>
#include <asm/sibyte/bcm1480_regs.h>
#include <asm/sibyte/bcm1480_int.h>
extern void smp_call_function_interrupt(void);
/*
* These are routines for dealing with the bcm1480 smp capabilities
* independent of board/firmware
*/
static void *mailbox_0_set_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_SET_CPU),
};
static void *mailbox_0_clear_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CLR_CPU),
};
static void *mailbox_0_regs[] = {
IOADDR(A_BCM1480_IMR_CPU0_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
IOADDR(A_BCM1480_IMR_CPU1_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
IOADDR(A_BCM1480_IMR_CPU2_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
IOADDR(A_BCM1480_IMR_CPU3_BASE + R_BCM1480_IMR_MAILBOX_0_CPU),
};
/*
* SMP init and finish on secondary CPUs
*/
void __cpuinit bcm1480_smp_init(void)
{
unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
STATUSF_IP1 | STATUSF_IP0;
/* Set interrupt mask, but don't enable */
change_c0_status(ST0_IM, imask);
}
/*
* These are routines for dealing with the sb1250 smp capabilities
* independent of board/firmware
*/
/*
* Simple enough; everything is set up, so just poke the appropriate mailbox
* register, and we should be set
*/
static void bcm1480_send_ipi_single(int cpu, unsigned int action)
{
__raw_writeq((((u64)action)<< 48), mailbox_0_set_regs[cpu]);
}
static void bcm1480_send_ipi_mask(cpumask_t mask, unsigned int action)
{
unsigned int i;
for_each_cpu_mask(i, mask)
bcm1480_send_ipi_single(i, action);
}
/*
* Code to run on secondary just after probing the CPU
*/
static void __cpuinit bcm1480_init_secondary(void)
{
extern void bcm1480_smp_init(void);
bcm1480_smp_init();
}
/*
* Do any tidying up before marking online and running the idle
* loop
*/
static void __cpuinit bcm1480_smp_finish(void)
{
extern void sb1480_clockevent_init(void);
sb1480_clockevent_init();
local_irq_enable();
}
/*
* Final cleanup after all secondaries booted
*/
static void bcm1480_cpus_done(void)
{
}
/*
* Setup the PC, SP, and GP of a secondary processor and start it
* running!
*/
static void __cpuinit bcm1480_boot_secondary(int cpu, struct task_struct *idle)
{
int retval;
retval = cfe_cpu_start(cpu_logical_map(cpu), &smp_bootstrap,
__KSTK_TOS(idle),
(unsigned long)task_thread_info(idle), 0);
if (retval != 0)
printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
}
/*
* Use CFE to find out how many CPUs are available, setting up
* phys_cpu_present_map and the logical/physical mappings.
* XXXKW will the boot CPU ever not be physical 0?
*
* Common setup before any secondaries are started
*/
static void __init bcm1480_smp_setup(void)
{
int i, num;
cpus_clear(phys_cpu_present_map);
cpu_set(0, phys_cpu_present_map);
__cpu_number_map[0] = 0;
__cpu_logical_map[0] = 0;
for (i = 1, num = 0; i < NR_CPUS; i++) {
if (cfe_cpu_stop(i) == 0) {
cpu_set(i, phys_cpu_present_map);
__cpu_number_map[i] = ++num;
__cpu_logical_map[num] = i;
}
}
printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
}
static void __init bcm1480_prepare_cpus(unsigned int max_cpus)
{
}
struct plat_smp_ops bcm1480_smp_ops = {
.send_ipi_single = bcm1480_send_ipi_single,
.send_ipi_mask = bcm1480_send_ipi_mask,
.init_secondary = bcm1480_init_secondary,
.smp_finish = bcm1480_smp_finish,
.cpus_done = bcm1480_cpus_done,
.boot_secondary = bcm1480_boot_secondary,
.smp_setup = bcm1480_smp_setup,
.prepare_cpus = bcm1480_prepare_cpus,
};
void bcm1480_mailbox_interrupt(void)
{
int cpu = smp_processor_id();
unsigned int action;
kstat_this_cpu.irqs[K_BCM1480_INT_MBOX_0_0]++;
/* Load the mailbox register to figure out what we're supposed to do */
action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff;
/* Clear the mailbox to clear the interrupt */
__raw_writeq(((u64)action)<<48, mailbox_0_clear_regs[cpu]);
/*
* Nothing to do for SMP_RESCHEDULE_YOURSELF; returning from the
* interrupt will do the reschedule for us
*/
if (action & SMP_CALL_FUNCTION)
smp_call_function_interrupt();
}