blob: 3d9249632ae12e7051174817241ef37ea6f2cd4c [file] [log] [blame]
#
# USB Storage driver configuration
#
comment "NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'"
comment "may also be needed; see USB_STORAGE Help for more information"
depends on USB
config USB_STORAGE
tristate "USB Mass Storage support"
depends on USB && SCSI
---help---
Say Y here if you want to connect USB mass storage devices to your
computer's USB port. This is the driver you need for USB
floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
USB flash devices, and memory sticks, along with
similar devices. This driver may also be used for some cameras
and card readers.
This option depends on 'SCSI' support being enabled, but you
probably also need 'SCSI device support: SCSI disk support'
(BLK_DEV_SD) for most USB storage devices.
To compile this driver as a module, choose M here: the
module will be called usb-storage.
config USB_STORAGE_DEBUG
bool "USB Mass Storage verbose debug"
depends on USB_STORAGE
help
Say Y here in order to have the USB Mass Storage code generate
verbose debugging messages.
config USB_STORAGE_DATAFAB
bool "Datafab Compact Flash Reader support"
depends on USB_STORAGE
help
Support for certain Datafab CompactFlash readers.
Datafab has a web page at <http://www.datafabusa.com/>.
config USB_STORAGE_FREECOM
bool "Freecom USB/ATAPI Bridge support"
depends on USB_STORAGE
help
Support for the Freecom USB to IDE/ATAPI adaptor.
Freecom has a web page at <http://www.freecom.de/>.
config USB_STORAGE_ISD200
bool "ISD-200 USB/ATA Bridge support"
depends on USB_STORAGE
---help---
Say Y here if you want to use USB Mass Store devices based
on the In-Systems Design ISD-200 USB/ATA bridge.
Some of the products that use this chip are:
- Archos Jukebox 6000
- ISD SmartCable for Storage
- Taiwan Skymaster CD530U/DEL-0241 IDE bridge
- Sony CRX10U CD-R/RW drive
- CyQ've CQ8060A CDRW drive
- Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
config USB_STORAGE_DPCM
bool "Microtech/ZiO! CompactFlash/SmartMedia support"
depends on USB_STORAGE
help
Say Y here to support the Microtech/ZiO! CompactFlash reader.
There is a web page at <http://www.ziocorp.com/products/>.
config USB_STORAGE_USBAT
bool "USBAT/USBAT02-based storage support"
depends on USB_STORAGE
help
Say Y here to include additional code to support storage devices
based on the SCM/Shuttle USBAT/USBAT02 processors.
Devices reported to work with this driver include:
- CompactFlash reader included with Kodak DC3800 camera
- Dane-Elec Zmate CompactFlash reader
- Delkin Efilm reader2
- HP 8200e/8210e/8230e CD-Writer Plus drives
- I-JAM JS-50U
- Jessops CompactFlash JESDCFRU BLACK
- Kingston Technology PCREAD-USB/CF
- Maxell UA4 CompactFlash reader
- Memorex UCF-100
- Microtech ZiO! ICS-45 CF2
- RCA LYRA MP3 portable
- Sandisk ImageMate SDDR-05b
config USB_STORAGE_SDDR09
bool "SanDisk SDDR-09 (and other SmartMedia) support"
depends on USB_STORAGE
help
Say Y here to include additional code to support the Sandisk SDDR-09
SmartMedia reader in the USB Mass Storage driver.
Also works for the Microtech Zio! SmartMedia reader.
config USB_STORAGE_SDDR55
bool "SanDisk SDDR-55 SmartMedia support"
depends on USB_STORAGE
help
Say Y here to include additional code to support the Sandisk SDDR-55
SmartMedia reader in the USB Mass Storage driver.
config USB_STORAGE_JUMPSHOT
bool "Lexar Jumpshot Compact Flash Reader"
depends on USB_STORAGE
help
Say Y here to include additional code to support the Lexar Jumpshot
USB CompactFlash reader.
config USB_STORAGE_ALAUDA
bool "Olympus MAUSB-10/Fuji DPC-R1 support"
depends on USB_STORAGE
help
Say Y here to include additional code to support the Olympus MAUSB-10
and Fujifilm DPC-R1 USB Card reader/writer devices.
These devices are based on the Alauda chip and support both
XD and SmartMedia cards.
config USB_STORAGE_ONETOUCH
bool "Support OneTouch Button on Maxtor Hard Drives"
depends on USB_STORAGE
depends on INPUT=y || INPUT=USB_STORAGE
help
Say Y here to include additional code to support the Maxtor OneTouch
USB hard drive's onetouch button.
This code registers the button on the front of Maxtor OneTouch USB
hard drive's as an input device. An action can be associated with
this input in any keybinding software. (e.g. gnome's keyboard short-
cuts)
config USB_STORAGE_KARMA
bool "Support for Rio Karma music player"
depends on USB_STORAGE
help
Say Y here to include additional code to support the Rio Karma
USB interface.
This code places the Rio Karma into mass storage mode, enabling
it to be mounted as an ordinary filesystem. Performing an eject
on the resulting scsi device node returns the Karma to normal
operation.
config USB_STORAGE_CYPRESS_ATACB
bool "SAT emulation on Cypress USB/ATA Bridge with ATACB"
depends on USB_STORAGE
---help---
Say Y here if you want to use SAT (ata pass through) on devices based
on the Cypress USB/ATA bridge supporting ATACB. This will allow you
to use tools to tune and monitor your drive (like hdparm or smartctl).
If you say no here your device will still work with the standard usb
mass storage class.
config USB_LIBUSUAL
bool "The shared table of common (or usual) storage devices"
depends on USB
help
This module contains a table of common (or usual) devices
for usb-storage and ub drivers, and allows to switch binding
of these devices without rebuilding modules.
Typical syntax of /etc/modprobe.conf is:
options libusual bias="ub"
If unsure, say N.