| /*---------------------------------------------------------------------------+ |
| | get_address.c | |
| | | |
| | Get the effective address from an FPU instruction. | |
| | | |
| | Copyright (C) 1992,1993,1994,1997 | |
| | W. Metzenthen, 22 Parker St, Ormond, Vic 3163, | |
| | Australia. E-mail billm@suburbia.net | |
| | | |
| | | |
| +---------------------------------------------------------------------------*/ |
| |
| /*---------------------------------------------------------------------------+ |
| | Note: | |
| | The file contains code which accesses user memory. | |
| | Emulator static data may change when user memory is accessed, due to | |
| | other processes using the emulator while swapping is in progress. | |
| +---------------------------------------------------------------------------*/ |
| |
| #include <linux/stddef.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/desc.h> |
| |
| #include "fpu_system.h" |
| #include "exception.h" |
| #include "fpu_emu.h" |
| |
| #define FPU_WRITE_BIT 0x10 |
| |
| static int reg_offset[] = { |
| offsetof(struct info, ___eax), |
| offsetof(struct info, ___ecx), |
| offsetof(struct info, ___edx), |
| offsetof(struct info, ___ebx), |
| offsetof(struct info, ___esp), |
| offsetof(struct info, ___ebp), |
| offsetof(struct info, ___esi), |
| offsetof(struct info, ___edi) |
| }; |
| |
| #define REG_(x) (*(long *)(reg_offset[(x)]+(u_char *) FPU_info)) |
| |
| static int reg_offset_vm86[] = { |
| offsetof(struct info, ___cs), |
| offsetof(struct info, ___vm86_ds), |
| offsetof(struct info, ___vm86_es), |
| offsetof(struct info, ___vm86_fs), |
| offsetof(struct info, ___vm86_gs), |
| offsetof(struct info, ___ss), |
| offsetof(struct info, ___vm86_ds) |
| }; |
| |
| #define VM86_REG_(x) (*(unsigned short *) \ |
| (reg_offset_vm86[((unsigned)x)]+(u_char *) FPU_info)) |
| |
| /* This dummy, gs is not saved on the stack. */ |
| #define ___GS ___ds |
| |
| static int reg_offset_pm[] = { |
| offsetof(struct info, ___cs), |
| offsetof(struct info, ___ds), |
| offsetof(struct info, ___es), |
| offsetof(struct info, ___fs), |
| offsetof(struct info, ___GS), |
| offsetof(struct info, ___ss), |
| offsetof(struct info, ___ds) |
| }; |
| |
| #define PM_REG_(x) (*(unsigned short *) \ |
| (reg_offset_pm[((unsigned)x)]+(u_char *) FPU_info)) |
| |
| /* Decode the SIB byte. This function assumes mod != 0 */ |
| static int sib(int mod, unsigned long *fpu_eip) |
| { |
| u_char ss, index, base; |
| long offset; |
| |
| RE_ENTRANT_CHECK_OFF; |
| FPU_code_access_ok(1); |
| FPU_get_user(base, (u_char __user *) (*fpu_eip)); /* The SIB byte */ |
| RE_ENTRANT_CHECK_ON; |
| (*fpu_eip)++; |
| ss = base >> 6; |
| index = (base >> 3) & 7; |
| base &= 7; |
| |
| if ((mod == 0) && (base == 5)) |
| offset = 0; /* No base register */ |
| else |
| offset = REG_(base); |
| |
| if (index == 4) { |
| /* No index register */ |
| /* A non-zero ss is illegal */ |
| if (ss) |
| EXCEPTION(EX_Invalid); |
| } else { |
| offset += (REG_(index)) << ss; |
| } |
| |
| if (mod == 1) { |
| /* 8 bit signed displacement */ |
| long displacement; |
| RE_ENTRANT_CHECK_OFF; |
| FPU_code_access_ok(1); |
| FPU_get_user(displacement, (signed char __user *)(*fpu_eip)); |
| offset += displacement; |
| RE_ENTRANT_CHECK_ON; |
| (*fpu_eip)++; |
| } else if (mod == 2 || base == 5) { /* The second condition also has mod==0 */ |
| /* 32 bit displacement */ |
| long displacement; |
| RE_ENTRANT_CHECK_OFF; |
| FPU_code_access_ok(4); |
| FPU_get_user(displacement, (long __user *)(*fpu_eip)); |
| offset += displacement; |
| RE_ENTRANT_CHECK_ON; |
| (*fpu_eip) += 4; |
| } |
| |
| return offset; |
| } |
| |
| static unsigned long vm86_segment(u_char segment, struct address *addr) |
| { |
| segment--; |
| #ifdef PARANOID |
| if (segment > PREFIX_SS_) { |
| EXCEPTION(EX_INTERNAL | 0x130); |
| math_abort(FPU_info, SIGSEGV); |
| } |
| #endif /* PARANOID */ |
| addr->selector = VM86_REG_(segment); |
| return (unsigned long)VM86_REG_(segment) << 4; |
| } |
| |
| /* This should work for 16 and 32 bit protected mode. */ |
| static long pm_address(u_char FPU_modrm, u_char segment, |
| struct address *addr, long offset) |
| { |
| struct desc_struct descriptor; |
| unsigned long base_address, limit, address, seg_top; |
| |
| segment--; |
| |
| #ifdef PARANOID |
| /* segment is unsigned, so this also detects if segment was 0: */ |
| if (segment > PREFIX_SS_) { |
| EXCEPTION(EX_INTERNAL | 0x132); |
| math_abort(FPU_info, SIGSEGV); |
| } |
| #endif /* PARANOID */ |
| |
| switch (segment) { |
| /* gs isn't used by the kernel, so it still has its |
| user-space value. */ |
| case PREFIX_GS_ - 1: |
| /* N.B. - movl %seg, mem is a 2 byte write regardless of prefix */ |
| savesegment(gs, addr->selector); |
| break; |
| default: |
| addr->selector = PM_REG_(segment); |
| } |
| |
| descriptor = LDT_DESCRIPTOR(PM_REG_(segment)); |
| base_address = SEG_BASE_ADDR(descriptor); |
| address = base_address + offset; |
| limit = base_address |
| + (SEG_LIMIT(descriptor) + 1) * SEG_GRANULARITY(descriptor) - 1; |
| if (limit < base_address) |
| limit = 0xffffffff; |
| |
| if (SEG_EXPAND_DOWN(descriptor)) { |
| if (SEG_G_BIT(descriptor)) |
| seg_top = 0xffffffff; |
| else { |
| seg_top = base_address + (1 << 20); |
| if (seg_top < base_address) |
| seg_top = 0xffffffff; |
| } |
| access_limit = |
| (address <= limit) || (address >= seg_top) ? 0 : |
| ((seg_top - address) >= 255 ? 255 : seg_top - address); |
| } else { |
| access_limit = |
| (address > limit) || (address < base_address) ? 0 : |
| ((limit - address) >= 254 ? 255 : limit - address + 1); |
| } |
| if (SEG_EXECUTE_ONLY(descriptor) || |
| (!SEG_WRITE_PERM(descriptor) && (FPU_modrm & FPU_WRITE_BIT))) { |
| access_limit = 0; |
| } |
| return address; |
| } |
| |
| /* |
| MOD R/M byte: MOD == 3 has a special use for the FPU |
| SIB byte used iff R/M = 100b |
| |
| 7 6 5 4 3 2 1 0 |
| ..... ......... ......... |
| MOD OPCODE(2) R/M |
| |
| SIB byte |
| |
| 7 6 5 4 3 2 1 0 |
| ..... ......... ......... |
| SS INDEX BASE |
| |
| */ |
| |
| void __user *FPU_get_address(u_char FPU_modrm, unsigned long *fpu_eip, |
| struct address *addr, fpu_addr_modes addr_modes) |
| { |
| u_char mod; |
| unsigned rm = FPU_modrm & 7; |
| long *cpu_reg_ptr; |
| int address = 0; /* Initialized just to stop compiler warnings. */ |
| |
| /* Memory accessed via the cs selector is write protected |
| in `non-segmented' 32 bit protected mode. */ |
| if (!addr_modes.default_mode && (FPU_modrm & FPU_WRITE_BIT) |
| && (addr_modes.override.segment == PREFIX_CS_)) { |
| math_abort(FPU_info, SIGSEGV); |
| } |
| |
| addr->selector = FPU_DS; /* Default, for 32 bit non-segmented mode. */ |
| |
| mod = (FPU_modrm >> 6) & 3; |
| |
| if (rm == 4 && mod != 3) { |
| address = sib(mod, fpu_eip); |
| } else { |
| cpu_reg_ptr = ®_(rm); |
| switch (mod) { |
| case 0: |
| if (rm == 5) { |
| /* Special case: disp32 */ |
| RE_ENTRANT_CHECK_OFF; |
| FPU_code_access_ok(4); |
| FPU_get_user(address, |
| (unsigned long __user |
| *)(*fpu_eip)); |
| (*fpu_eip) += 4; |
| RE_ENTRANT_CHECK_ON; |
| addr->offset = address; |
| return (void __user *)address; |
| } else { |
| address = *cpu_reg_ptr; /* Just return the contents |
| of the cpu register */ |
| addr->offset = address; |
| return (void __user *)address; |
| } |
| case 1: |
| /* 8 bit signed displacement */ |
| RE_ENTRANT_CHECK_OFF; |
| FPU_code_access_ok(1); |
| FPU_get_user(address, (signed char __user *)(*fpu_eip)); |
| RE_ENTRANT_CHECK_ON; |
| (*fpu_eip)++; |
| break; |
| case 2: |
| /* 32 bit displacement */ |
| RE_ENTRANT_CHECK_OFF; |
| FPU_code_access_ok(4); |
| FPU_get_user(address, (long __user *)(*fpu_eip)); |
| (*fpu_eip) += 4; |
| RE_ENTRANT_CHECK_ON; |
| break; |
| case 3: |
| /* Not legal for the FPU */ |
| EXCEPTION(EX_Invalid); |
| } |
| address += *cpu_reg_ptr; |
| } |
| |
| addr->offset = address; |
| |
| switch (addr_modes.default_mode) { |
| case 0: |
| break; |
| case VM86: |
| address += vm86_segment(addr_modes.override.segment, addr); |
| break; |
| case PM16: |
| case SEG32: |
| address = pm_address(FPU_modrm, addr_modes.override.segment, |
| addr, address); |
| break; |
| default: |
| EXCEPTION(EX_INTERNAL | 0x133); |
| } |
| |
| return (void __user *)address; |
| } |
| |
| void __user *FPU_get_address_16(u_char FPU_modrm, unsigned long *fpu_eip, |
| struct address *addr, fpu_addr_modes addr_modes) |
| { |
| u_char mod; |
| unsigned rm = FPU_modrm & 7; |
| int address = 0; /* Default used for mod == 0 */ |
| |
| /* Memory accessed via the cs selector is write protected |
| in `non-segmented' 32 bit protected mode. */ |
| if (!addr_modes.default_mode && (FPU_modrm & FPU_WRITE_BIT) |
| && (addr_modes.override.segment == PREFIX_CS_)) { |
| math_abort(FPU_info, SIGSEGV); |
| } |
| |
| addr->selector = FPU_DS; /* Default, for 32 bit non-segmented mode. */ |
| |
| mod = (FPU_modrm >> 6) & 3; |
| |
| switch (mod) { |
| case 0: |
| if (rm == 6) { |
| /* Special case: disp16 */ |
| RE_ENTRANT_CHECK_OFF; |
| FPU_code_access_ok(2); |
| FPU_get_user(address, |
| (unsigned short __user *)(*fpu_eip)); |
| (*fpu_eip) += 2; |
| RE_ENTRANT_CHECK_ON; |
| goto add_segment; |
| } |
| break; |
| case 1: |
| /* 8 bit signed displacement */ |
| RE_ENTRANT_CHECK_OFF; |
| FPU_code_access_ok(1); |
| FPU_get_user(address, (signed char __user *)(*fpu_eip)); |
| RE_ENTRANT_CHECK_ON; |
| (*fpu_eip)++; |
| break; |
| case 2: |
| /* 16 bit displacement */ |
| RE_ENTRANT_CHECK_OFF; |
| FPU_code_access_ok(2); |
| FPU_get_user(address, (unsigned short __user *)(*fpu_eip)); |
| (*fpu_eip) += 2; |
| RE_ENTRANT_CHECK_ON; |
| break; |
| case 3: |
| /* Not legal for the FPU */ |
| EXCEPTION(EX_Invalid); |
| break; |
| } |
| switch (rm) { |
| case 0: |
| address += FPU_info->___ebx + FPU_info->___esi; |
| break; |
| case 1: |
| address += FPU_info->___ebx + FPU_info->___edi; |
| break; |
| case 2: |
| address += FPU_info->___ebp + FPU_info->___esi; |
| if (addr_modes.override.segment == PREFIX_DEFAULT) |
| addr_modes.override.segment = PREFIX_SS_; |
| break; |
| case 3: |
| address += FPU_info->___ebp + FPU_info->___edi; |
| if (addr_modes.override.segment == PREFIX_DEFAULT) |
| addr_modes.override.segment = PREFIX_SS_; |
| break; |
| case 4: |
| address += FPU_info->___esi; |
| break; |
| case 5: |
| address += FPU_info->___edi; |
| break; |
| case 6: |
| address += FPU_info->___ebp; |
| if (addr_modes.override.segment == PREFIX_DEFAULT) |
| addr_modes.override.segment = PREFIX_SS_; |
| break; |
| case 7: |
| address += FPU_info->___ebx; |
| break; |
| } |
| |
| add_segment: |
| address &= 0xffff; |
| |
| addr->offset = address; |
| |
| switch (addr_modes.default_mode) { |
| case 0: |
| break; |
| case VM86: |
| address += vm86_segment(addr_modes.override.segment, addr); |
| break; |
| case PM16: |
| case SEG32: |
| address = pm_address(FPU_modrm, addr_modes.override.segment, |
| addr, address); |
| break; |
| default: |
| EXCEPTION(EX_INTERNAL | 0x131); |
| } |
| |
| return (void __user *)address; |
| } |