| #include <linux/init.h> |
| #include <linux/string.h> |
| #include <linux/delay.h> |
| #include <linux/smp.h> |
| #include <linux/module.h> |
| #include <linux/percpu.h> |
| #include <linux/bootmem.h> |
| #include <asm/processor.h> |
| #include <asm/i387.h> |
| #include <asm/msr.h> |
| #include <asm/io.h> |
| #include <asm/mmu_context.h> |
| #include <asm/mtrr.h> |
| #include <asm/mce.h> |
| #include <asm/pat.h> |
| #ifdef CONFIG_X86_LOCAL_APIC |
| #include <asm/mpspec.h> |
| #include <asm/apic.h> |
| #include <mach_apic.h> |
| #endif |
| |
| #include "cpu.h" |
| |
| DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { |
| [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } }, |
| [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } }, |
| [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } }, |
| [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff200 } } }, |
| /* |
| * Segments used for calling PnP BIOS have byte granularity. |
| * They code segments and data segments have fixed 64k limits, |
| * the transfer segment sizes are set at run time. |
| */ |
| /* 32-bit code */ |
| [GDT_ENTRY_PNPBIOS_CS32] = { { { 0x0000ffff, 0x00409a00 } } }, |
| /* 16-bit code */ |
| [GDT_ENTRY_PNPBIOS_CS16] = { { { 0x0000ffff, 0x00009a00 } } }, |
| /* 16-bit data */ |
| [GDT_ENTRY_PNPBIOS_DS] = { { { 0x0000ffff, 0x00009200 } } }, |
| /* 16-bit data */ |
| [GDT_ENTRY_PNPBIOS_TS1] = { { { 0x00000000, 0x00009200 } } }, |
| /* 16-bit data */ |
| [GDT_ENTRY_PNPBIOS_TS2] = { { { 0x00000000, 0x00009200 } } }, |
| /* |
| * The APM segments have byte granularity and their bases |
| * are set at run time. All have 64k limits. |
| */ |
| /* 32-bit code */ |
| [GDT_ENTRY_APMBIOS_BASE] = { { { 0x0000ffff, 0x00409a00 } } }, |
| /* 16-bit code */ |
| [GDT_ENTRY_APMBIOS_BASE+1] = { { { 0x0000ffff, 0x00009a00 } } }, |
| /* data */ |
| [GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } }, |
| |
| [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } }, |
| [GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } }, |
| } }; |
| EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); |
| |
| __u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; |
| |
| static int cachesize_override __cpuinitdata = -1; |
| static int disable_x86_serial_nr __cpuinitdata = 1; |
| |
| struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {}; |
| |
| static void __cpuinit default_init(struct cpuinfo_x86 *c) |
| { |
| /* Not much we can do here... */ |
| /* Check if at least it has cpuid */ |
| if (c->cpuid_level == -1) { |
| /* No cpuid. It must be an ancient CPU */ |
| if (c->x86 == 4) |
| strcpy(c->x86_model_id, "486"); |
| else if (c->x86 == 3) |
| strcpy(c->x86_model_id, "386"); |
| } |
| } |
| |
| static struct cpu_dev __cpuinitdata default_cpu = { |
| .c_init = default_init, |
| .c_vendor = "Unknown", |
| }; |
| static struct cpu_dev *this_cpu __cpuinitdata = &default_cpu; |
| |
| static int __init cachesize_setup(char *str) |
| { |
| get_option(&str, &cachesize_override); |
| return 1; |
| } |
| __setup("cachesize=", cachesize_setup); |
| |
| int __cpuinit get_model_name(struct cpuinfo_x86 *c) |
| { |
| unsigned int *v; |
| char *p, *q; |
| |
| if (cpuid_eax(0x80000000) < 0x80000004) |
| return 0; |
| |
| v = (unsigned int *) c->x86_model_id; |
| cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]); |
| cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]); |
| cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]); |
| c->x86_model_id[48] = 0; |
| |
| /* Intel chips right-justify this string for some dumb reason; |
| undo that brain damage */ |
| p = q = &c->x86_model_id[0]; |
| while (*p == ' ') |
| p++; |
| if (p != q) { |
| while (*p) |
| *q++ = *p++; |
| while (q <= &c->x86_model_id[48]) |
| *q++ = '\0'; /* Zero-pad the rest */ |
| } |
| |
| return 1; |
| } |
| |
| |
| void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c) |
| { |
| unsigned int n, dummy, ecx, edx, l2size; |
| |
| n = cpuid_eax(0x80000000); |
| |
| if (n >= 0x80000005) { |
| cpuid(0x80000005, &dummy, &dummy, &ecx, &edx); |
| printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n", |
| edx>>24, edx&0xFF, ecx>>24, ecx&0xFF); |
| c->x86_cache_size = (ecx>>24)+(edx>>24); |
| } |
| |
| if (n < 0x80000006) /* Some chips just has a large L1. */ |
| return; |
| |
| ecx = cpuid_ecx(0x80000006); |
| l2size = ecx >> 16; |
| |
| /* do processor-specific cache resizing */ |
| if (this_cpu->c_size_cache) |
| l2size = this_cpu->c_size_cache(c, l2size); |
| |
| /* Allow user to override all this if necessary. */ |
| if (cachesize_override != -1) |
| l2size = cachesize_override; |
| |
| if (l2size == 0) |
| return; /* Again, no L2 cache is possible */ |
| |
| c->x86_cache_size = l2size; |
| |
| printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n", |
| l2size, ecx & 0xFF); |
| } |
| |
| /* |
| * Naming convention should be: <Name> [(<Codename>)] |
| * This table only is used unless init_<vendor>() below doesn't set it; |
| * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used |
| * |
| */ |
| |
| /* Look up CPU names by table lookup. */ |
| static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c) |
| { |
| struct cpu_model_info *info; |
| |
| if (c->x86_model >= 16) |
| return NULL; /* Range check */ |
| |
| if (!this_cpu) |
| return NULL; |
| |
| info = this_cpu->c_models; |
| |
| while (info && info->family) { |
| if (info->family == c->x86) |
| return info->model_names[c->x86_model]; |
| info++; |
| } |
| return NULL; /* Not found */ |
| } |
| |
| |
| static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c, int early) |
| { |
| char *v = c->x86_vendor_id; |
| int i; |
| static int printed; |
| |
| for (i = 0; i < X86_VENDOR_NUM; i++) { |
| if (cpu_devs[i]) { |
| if (!strcmp(v, cpu_devs[i]->c_ident[0]) || |
| (cpu_devs[i]->c_ident[1] && |
| !strcmp(v, cpu_devs[i]->c_ident[1]))) { |
| c->x86_vendor = i; |
| if (!early) |
| this_cpu = cpu_devs[i]; |
| return; |
| } |
| } |
| } |
| if (!printed) { |
| printed++; |
| printk(KERN_ERR "CPU: Vendor unknown, using generic init.\n"); |
| printk(KERN_ERR "CPU: Your system may be unstable.\n"); |
| } |
| c->x86_vendor = X86_VENDOR_UNKNOWN; |
| this_cpu = &default_cpu; |
| } |
| |
| |
| static int __init x86_fxsr_setup(char *s) |
| { |
| setup_clear_cpu_cap(X86_FEATURE_FXSR); |
| setup_clear_cpu_cap(X86_FEATURE_XMM); |
| return 1; |
| } |
| __setup("nofxsr", x86_fxsr_setup); |
| |
| |
| static int __init x86_sep_setup(char *s) |
| { |
| setup_clear_cpu_cap(X86_FEATURE_SEP); |
| return 1; |
| } |
| __setup("nosep", x86_sep_setup); |
| |
| |
| /* Standard macro to see if a specific flag is changeable */ |
| static inline int flag_is_changeable_p(u32 flag) |
| { |
| u32 f1, f2; |
| |
| asm("pushfl\n\t" |
| "pushfl\n\t" |
| "popl %0\n\t" |
| "movl %0,%1\n\t" |
| "xorl %2,%0\n\t" |
| "pushl %0\n\t" |
| "popfl\n\t" |
| "pushfl\n\t" |
| "popl %0\n\t" |
| "popfl\n\t" |
| : "=&r" (f1), "=&r" (f2) |
| : "ir" (flag)); |
| |
| return ((f1^f2) & flag) != 0; |
| } |
| |
| |
| /* Probe for the CPUID instruction */ |
| static int __cpuinit have_cpuid_p(void) |
| { |
| return flag_is_changeable_p(X86_EFLAGS_ID); |
| } |
| |
| void __init cpu_detect(struct cpuinfo_x86 *c) |
| { |
| /* Get vendor name */ |
| cpuid(0x00000000, (unsigned int *)&c->cpuid_level, |
| (unsigned int *)&c->x86_vendor_id[0], |
| (unsigned int *)&c->x86_vendor_id[8], |
| (unsigned int *)&c->x86_vendor_id[4]); |
| |
| c->x86 = 4; |
| if (c->cpuid_level >= 0x00000001) { |
| u32 junk, tfms, cap0, misc; |
| cpuid(0x00000001, &tfms, &misc, &junk, &cap0); |
| c->x86 = (tfms >> 8) & 15; |
| c->x86_model = (tfms >> 4) & 15; |
| if (c->x86 == 0xf) |
| c->x86 += (tfms >> 20) & 0xff; |
| if (c->x86 >= 0x6) |
| c->x86_model += ((tfms >> 16) & 0xF) << 4; |
| c->x86_mask = tfms & 15; |
| if (cap0 & (1<<19)) { |
| c->x86_cache_alignment = ((misc >> 8) & 0xff) * 8; |
| c->x86_clflush_size = ((misc >> 8) & 0xff) * 8; |
| } |
| } |
| } |
| static void __cpuinit early_get_cap(struct cpuinfo_x86 *c) |
| { |
| u32 tfms, xlvl; |
| unsigned int ebx; |
| |
| memset(&c->x86_capability, 0, sizeof c->x86_capability); |
| if (have_cpuid_p()) { |
| /* Intel-defined flags: level 0x00000001 */ |
| if (c->cpuid_level >= 0x00000001) { |
| u32 capability, excap; |
| cpuid(0x00000001, &tfms, &ebx, &excap, &capability); |
| c->x86_capability[0] = capability; |
| c->x86_capability[4] = excap; |
| } |
| |
| /* AMD-defined flags: level 0x80000001 */ |
| xlvl = cpuid_eax(0x80000000); |
| if ((xlvl & 0xffff0000) == 0x80000000) { |
| if (xlvl >= 0x80000001) { |
| c->x86_capability[1] = cpuid_edx(0x80000001); |
| c->x86_capability[6] = cpuid_ecx(0x80000001); |
| } |
| } |
| |
| } |
| |
| } |
| |
| /* |
| * Do minimum CPU detection early. |
| * Fields really needed: vendor, cpuid_level, family, model, mask, |
| * cache alignment. |
| * The others are not touched to avoid unwanted side effects. |
| * |
| * WARNING: this function is only called on the BP. Don't add code here |
| * that is supposed to run on all CPUs. |
| */ |
| static void __init early_cpu_detect(void) |
| { |
| struct cpuinfo_x86 *c = &boot_cpu_data; |
| |
| c->x86_cache_alignment = 32; |
| c->x86_clflush_size = 32; |
| |
| if (!have_cpuid_p()) |
| return; |
| |
| cpu_detect(c); |
| |
| get_cpu_vendor(c, 1); |
| |
| if (c->x86_vendor != X86_VENDOR_UNKNOWN && |
| cpu_devs[c->x86_vendor]->c_early_init) |
| cpu_devs[c->x86_vendor]->c_early_init(c); |
| |
| early_get_cap(c); |
| } |
| |
| static void __cpuinit generic_identify(struct cpuinfo_x86 *c) |
| { |
| u32 tfms, xlvl; |
| unsigned int ebx; |
| |
| if (have_cpuid_p()) { |
| /* Get vendor name */ |
| cpuid(0x00000000, (unsigned int *)&c->cpuid_level, |
| (unsigned int *)&c->x86_vendor_id[0], |
| (unsigned int *)&c->x86_vendor_id[8], |
| (unsigned int *)&c->x86_vendor_id[4]); |
| |
| get_cpu_vendor(c, 0); |
| /* Initialize the standard set of capabilities */ |
| /* Note that the vendor-specific code below might override */ |
| /* Intel-defined flags: level 0x00000001 */ |
| if (c->cpuid_level >= 0x00000001) { |
| u32 capability, excap; |
| cpuid(0x00000001, &tfms, &ebx, &excap, &capability); |
| c->x86_capability[0] = capability; |
| c->x86_capability[4] = excap; |
| c->x86 = (tfms >> 8) & 15; |
| c->x86_model = (tfms >> 4) & 15; |
| if (c->x86 == 0xf) |
| c->x86 += (tfms >> 20) & 0xff; |
| if (c->x86 >= 0x6) |
| c->x86_model += ((tfms >> 16) & 0xF) << 4; |
| c->x86_mask = tfms & 15; |
| c->initial_apicid = (ebx >> 24) & 0xFF; |
| #ifdef CONFIG_X86_HT |
| c->apicid = phys_pkg_id(c->initial_apicid, 0); |
| c->phys_proc_id = c->initial_apicid; |
| #else |
| c->apicid = c->initial_apicid; |
| #endif |
| if (test_cpu_cap(c, X86_FEATURE_CLFLSH)) |
| c->x86_clflush_size = ((ebx >> 8) & 0xff) * 8; |
| } else { |
| /* Have CPUID level 0 only - unheard of */ |
| c->x86 = 4; |
| } |
| |
| /* AMD-defined flags: level 0x80000001 */ |
| xlvl = cpuid_eax(0x80000000); |
| if ((xlvl & 0xffff0000) == 0x80000000) { |
| if (xlvl >= 0x80000001) { |
| c->x86_capability[1] = cpuid_edx(0x80000001); |
| c->x86_capability[6] = cpuid_ecx(0x80000001); |
| } |
| if (xlvl >= 0x80000004) |
| get_model_name(c); /* Default name */ |
| } |
| |
| init_scattered_cpuid_features(c); |
| } |
| |
| } |
| |
| static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c) |
| { |
| if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) { |
| /* Disable processor serial number */ |
| unsigned long lo, hi; |
| rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi); |
| lo |= 0x200000; |
| wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi); |
| printk(KERN_NOTICE "CPU serial number disabled.\n"); |
| clear_cpu_cap(c, X86_FEATURE_PN); |
| |
| /* Disabling the serial number may affect the cpuid level */ |
| c->cpuid_level = cpuid_eax(0); |
| } |
| } |
| |
| static int __init x86_serial_nr_setup(char *s) |
| { |
| disable_x86_serial_nr = 0; |
| return 1; |
| } |
| __setup("serialnumber", x86_serial_nr_setup); |
| |
| |
| |
| /* |
| * This does the hard work of actually picking apart the CPU stuff... |
| */ |
| void __cpuinit identify_cpu(struct cpuinfo_x86 *c) |
| { |
| int i; |
| |
| c->loops_per_jiffy = loops_per_jiffy; |
| c->x86_cache_size = -1; |
| c->x86_vendor = X86_VENDOR_UNKNOWN; |
| c->cpuid_level = -1; /* CPUID not detected */ |
| c->x86_model = c->x86_mask = 0; /* So far unknown... */ |
| c->x86_vendor_id[0] = '\0'; /* Unset */ |
| c->x86_model_id[0] = '\0'; /* Unset */ |
| c->x86_max_cores = 1; |
| c->x86_clflush_size = 32; |
| memset(&c->x86_capability, 0, sizeof c->x86_capability); |
| |
| if (!have_cpuid_p()) { |
| /* |
| * First of all, decide if this is a 486 or higher |
| * It's a 486 if we can modify the AC flag |
| */ |
| if (flag_is_changeable_p(X86_EFLAGS_AC)) |
| c->x86 = 4; |
| else |
| c->x86 = 3; |
| } |
| |
| generic_identify(c); |
| |
| if (this_cpu->c_identify) |
| this_cpu->c_identify(c); |
| |
| /* |
| * Vendor-specific initialization. In this section we |
| * canonicalize the feature flags, meaning if there are |
| * features a certain CPU supports which CPUID doesn't |
| * tell us, CPUID claiming incorrect flags, or other bugs, |
| * we handle them here. |
| * |
| * At the end of this section, c->x86_capability better |
| * indicate the features this CPU genuinely supports! |
| */ |
| if (this_cpu->c_init) |
| this_cpu->c_init(c); |
| |
| /* Disable the PN if appropriate */ |
| squash_the_stupid_serial_number(c); |
| |
| /* |
| * The vendor-specific functions might have changed features. Now |
| * we do "generic changes." |
| */ |
| |
| /* If the model name is still unset, do table lookup. */ |
| if (!c->x86_model_id[0]) { |
| char *p; |
| p = table_lookup_model(c); |
| if (p) |
| strcpy(c->x86_model_id, p); |
| else |
| /* Last resort... */ |
| sprintf(c->x86_model_id, "%02x/%02x", |
| c->x86, c->x86_model); |
| } |
| |
| /* |
| * On SMP, boot_cpu_data holds the common feature set between |
| * all CPUs; so make sure that we indicate which features are |
| * common between the CPUs. The first time this routine gets |
| * executed, c == &boot_cpu_data. |
| */ |
| if (c != &boot_cpu_data) { |
| /* AND the already accumulated flags with these */ |
| for (i = 0 ; i < NCAPINTS ; i++) |
| boot_cpu_data.x86_capability[i] &= c->x86_capability[i]; |
| } |
| |
| /* Clear all flags overriden by options */ |
| for (i = 0; i < NCAPINTS; i++) |
| c->x86_capability[i] &= ~cleared_cpu_caps[i]; |
| |
| /* Init Machine Check Exception if available. */ |
| mcheck_init(c); |
| |
| select_idle_routine(c); |
| } |
| |
| void __init identify_boot_cpu(void) |
| { |
| identify_cpu(&boot_cpu_data); |
| sysenter_setup(); |
| enable_sep_cpu(); |
| } |
| |
| void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c) |
| { |
| BUG_ON(c == &boot_cpu_data); |
| identify_cpu(c); |
| enable_sep_cpu(); |
| mtrr_ap_init(); |
| } |
| |
| #ifdef CONFIG_X86_HT |
| void __cpuinit detect_ht(struct cpuinfo_x86 *c) |
| { |
| u32 eax, ebx, ecx, edx; |
| int index_msb, core_bits; |
| |
| cpuid(1, &eax, &ebx, &ecx, &edx); |
| |
| if (!cpu_has(c, X86_FEATURE_HT) || cpu_has(c, X86_FEATURE_CMP_LEGACY)) |
| return; |
| |
| smp_num_siblings = (ebx & 0xff0000) >> 16; |
| |
| if (smp_num_siblings == 1) { |
| printk(KERN_INFO "CPU: Hyper-Threading is disabled\n"); |
| } else if (smp_num_siblings > 1) { |
| |
| if (smp_num_siblings > NR_CPUS) { |
| printk(KERN_WARNING "CPU: Unsupported number of the " |
| "siblings %d", smp_num_siblings); |
| smp_num_siblings = 1; |
| return; |
| } |
| |
| index_msb = get_count_order(smp_num_siblings); |
| c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb); |
| |
| printk(KERN_INFO "CPU: Physical Processor ID: %d\n", |
| c->phys_proc_id); |
| |
| smp_num_siblings = smp_num_siblings / c->x86_max_cores; |
| |
| index_msb = get_count_order(smp_num_siblings) ; |
| |
| core_bits = get_count_order(c->x86_max_cores); |
| |
| c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) & |
| ((1 << core_bits) - 1); |
| |
| if (c->x86_max_cores > 1) |
| printk(KERN_INFO "CPU: Processor Core ID: %d\n", |
| c->cpu_core_id); |
| } |
| } |
| #endif |
| |
| static __init int setup_noclflush(char *arg) |
| { |
| setup_clear_cpu_cap(X86_FEATURE_CLFLSH); |
| return 1; |
| } |
| __setup("noclflush", setup_noclflush); |
| |
| void __cpuinit print_cpu_info(struct cpuinfo_x86 *c) |
| { |
| char *vendor = NULL; |
| |
| if (c->x86_vendor < X86_VENDOR_NUM) |
| vendor = this_cpu->c_vendor; |
| else if (c->cpuid_level >= 0) |
| vendor = c->x86_vendor_id; |
| |
| if (vendor && strncmp(c->x86_model_id, vendor, strlen(vendor))) |
| printk("%s ", vendor); |
| |
| if (!c->x86_model_id[0]) |
| printk("%d86", c->x86); |
| else |
| printk("%s", c->x86_model_id); |
| |
| if (c->x86_mask || c->cpuid_level >= 0) |
| printk(" stepping %02x\n", c->x86_mask); |
| else |
| printk("\n"); |
| } |
| |
| static __init int setup_disablecpuid(char *arg) |
| { |
| int bit; |
| if (get_option(&arg, &bit) && bit < NCAPINTS*32) |
| setup_clear_cpu_cap(bit); |
| else |
| return 0; |
| return 1; |
| } |
| __setup("clearcpuid=", setup_disablecpuid); |
| |
| cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE; |
| |
| void __init early_cpu_init(void) |
| { |
| struct cpu_vendor_dev *cvdev; |
| |
| for (cvdev = __x86cpuvendor_start ; |
| cvdev < __x86cpuvendor_end ; |
| cvdev++) |
| cpu_devs[cvdev->vendor] = cvdev->cpu_dev; |
| |
| early_cpu_detect(); |
| validate_pat_support(&boot_cpu_data); |
| } |
| |
| /* Make sure %fs is initialized properly in idle threads */ |
| struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs) |
| { |
| memset(regs, 0, sizeof(struct pt_regs)); |
| regs->fs = __KERNEL_PERCPU; |
| return regs; |
| } |
| |
| /* Current gdt points %fs at the "master" per-cpu area: after this, |
| * it's on the real one. */ |
| void switch_to_new_gdt(void) |
| { |
| struct desc_ptr gdt_descr; |
| |
| gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); |
| gdt_descr.size = GDT_SIZE - 1; |
| load_gdt(&gdt_descr); |
| asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory"); |
| } |
| |
| /* |
| * cpu_init() initializes state that is per-CPU. Some data is already |
| * initialized (naturally) in the bootstrap process, such as the GDT |
| * and IDT. We reload them nevertheless, this function acts as a |
| * 'CPU state barrier', nothing should get across. |
| */ |
| void __cpuinit cpu_init(void) |
| { |
| int cpu = smp_processor_id(); |
| struct task_struct *curr = current; |
| struct tss_struct *t = &per_cpu(init_tss, cpu); |
| struct thread_struct *thread = &curr->thread; |
| |
| if (cpu_test_and_set(cpu, cpu_initialized)) { |
| printk(KERN_WARNING "CPU#%d already initialized!\n", cpu); |
| for (;;) local_irq_enable(); |
| } |
| |
| printk(KERN_INFO "Initializing CPU#%d\n", cpu); |
| |
| if (cpu_has_vme || cpu_has_tsc || cpu_has_de) |
| clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE); |
| |
| load_idt(&idt_descr); |
| switch_to_new_gdt(); |
| |
| /* |
| * Set up and load the per-CPU TSS and LDT |
| */ |
| atomic_inc(&init_mm.mm_count); |
| curr->active_mm = &init_mm; |
| if (curr->mm) |
| BUG(); |
| enter_lazy_tlb(&init_mm, curr); |
| |
| load_sp0(t, thread); |
| set_tss_desc(cpu, t); |
| load_TR_desc(); |
| load_LDT(&init_mm.context); |
| |
| #ifdef CONFIG_DOUBLEFAULT |
| /* Set up doublefault TSS pointer in the GDT */ |
| __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); |
| #endif |
| |
| /* Clear %gs. */ |
| asm volatile ("mov %0, %%gs" : : "r" (0)); |
| |
| /* Clear all 6 debug registers: */ |
| set_debugreg(0, 0); |
| set_debugreg(0, 1); |
| set_debugreg(0, 2); |
| set_debugreg(0, 3); |
| set_debugreg(0, 6); |
| set_debugreg(0, 7); |
| |
| /* |
| * Force FPU initialization: |
| */ |
| current_thread_info()->status = 0; |
| clear_used_math(); |
| mxcsr_feature_mask_init(); |
| } |
| |
| #ifdef CONFIG_HOTPLUG_CPU |
| void __cpuinit cpu_uninit(void) |
| { |
| int cpu = raw_smp_processor_id(); |
| cpu_clear(cpu, cpu_initialized); |
| |
| /* lazy TLB state */ |
| per_cpu(cpu_tlbstate, cpu).state = 0; |
| per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm; |
| } |
| #endif |