| /* |
| * ohci1394.c - driver for OHCI 1394 boards |
| * Copyright (C)1999,2000 Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au> |
| * Gord Peters <GordPeters@smarttech.com> |
| * 2001 Ben Collins <bcollins@debian.org> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software Foundation, |
| * Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. |
| */ |
| |
| /* |
| * Things known to be working: |
| * . Async Request Transmit |
| * . Async Response Receive |
| * . Async Request Receive |
| * . Async Response Transmit |
| * . Iso Receive |
| * . DMA mmap for iso receive |
| * . Config ROM generation |
| * |
| * Things implemented, but still in test phase: |
| * . Iso Transmit |
| * . Async Stream Packets Transmit (Receive done via Iso interface) |
| * |
| * Things not implemented: |
| * . DMA error recovery |
| * |
| * Known bugs: |
| * . devctl BUS_RESET arg confusion (reset type or root holdoff?) |
| * added LONG_RESET_ROOT and SHORT_RESET_ROOT for root holdoff --kk |
| */ |
| |
| /* |
| * Acknowledgments: |
| * |
| * Adam J Richter <adam@yggdrasil.com> |
| * . Use of pci_class to find device |
| * |
| * Emilie Chung <emilie.chung@axis.com> |
| * . Tip on Async Request Filter |
| * |
| * Pascal Drolet <pascal.drolet@informission.ca> |
| * . Various tips for optimization and functionnalities |
| * |
| * Robert Ficklin <rficklin@westengineering.com> |
| * . Loop in irq_handler |
| * |
| * James Goodwin <jamesg@Filanet.com> |
| * . Various tips on initialization, self-id reception, etc. |
| * |
| * Albrecht Dress <ad@mpifr-bonn.mpg.de> |
| * . Apple PowerBook detection |
| * |
| * Daniel Kobras <daniel.kobras@student.uni-tuebingen.de> |
| * . Reset the board properly before leaving + misc cleanups |
| * |
| * Leon van Stuivenberg <leonvs@iae.nl> |
| * . Bug fixes |
| * |
| * Ben Collins <bcollins@debian.org> |
| * . Working big-endian support |
| * . Updated to 2.4.x module scheme (PCI aswell) |
| * . Config ROM generation |
| * |
| * Manfred Weihs <weihs@ict.tuwien.ac.at> |
| * . Reworked code for initiating bus resets |
| * (long, short, with or without hold-off) |
| * |
| * Nandu Santhi <contactnandu@users.sourceforge.net> |
| * . Added support for nVidia nForce2 onboard Firewire chipset |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/slab.h> |
| #include <linux/interrupt.h> |
| #include <linux/wait.h> |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/moduleparam.h> |
| #include <linux/pci.h> |
| #include <linux/fs.h> |
| #include <linux/poll.h> |
| #include <asm/byteorder.h> |
| #include <asm/atomic.h> |
| #include <asm/uaccess.h> |
| #include <linux/delay.h> |
| #include <linux/spinlock.h> |
| |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <asm/irq.h> |
| #include <linux/sched.h> |
| #include <linux/types.h> |
| #include <linux/vmalloc.h> |
| #include <linux/init.h> |
| |
| #ifdef CONFIG_PPC_PMAC |
| #include <asm/machdep.h> |
| #include <asm/pmac_feature.h> |
| #include <asm/prom.h> |
| #include <asm/pci-bridge.h> |
| #endif |
| |
| #include "csr1212.h" |
| #include "ieee1394.h" |
| #include "ieee1394_types.h" |
| #include "hosts.h" |
| #include "dma.h" |
| #include "iso.h" |
| #include "ieee1394_core.h" |
| #include "highlevel.h" |
| #include "ohci1394.h" |
| |
| #ifdef CONFIG_IEEE1394_VERBOSEDEBUG |
| #define OHCI1394_DEBUG |
| #endif |
| |
| #ifdef DBGMSG |
| #undef DBGMSG |
| #endif |
| |
| #ifdef OHCI1394_DEBUG |
| #define DBGMSG(fmt, args...) \ |
| printk(KERN_INFO "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args) |
| #else |
| #define DBGMSG(fmt, args...) do {} while (0) |
| #endif |
| |
| #ifdef CONFIG_IEEE1394_OHCI_DMA_DEBUG |
| #define OHCI_DMA_ALLOC(fmt, args...) \ |
| HPSB_ERR("%s(%s)alloc(%d): "fmt, OHCI1394_DRIVER_NAME, __FUNCTION__, \ |
| ++global_outstanding_dmas, ## args) |
| #define OHCI_DMA_FREE(fmt, args...) \ |
| HPSB_ERR("%s(%s)free(%d): "fmt, OHCI1394_DRIVER_NAME, __FUNCTION__, \ |
| --global_outstanding_dmas, ## args) |
| static int global_outstanding_dmas = 0; |
| #else |
| #define OHCI_DMA_ALLOC(fmt, args...) do {} while (0) |
| #define OHCI_DMA_FREE(fmt, args...) do {} while (0) |
| #endif |
| |
| /* print general (card independent) information */ |
| #define PRINT_G(level, fmt, args...) \ |
| printk(level "%s: " fmt "\n" , OHCI1394_DRIVER_NAME , ## args) |
| |
| /* print card specific information */ |
| #define PRINT(level, fmt, args...) \ |
| printk(level "%s: fw-host%d: " fmt "\n" , OHCI1394_DRIVER_NAME, ohci->host->id , ## args) |
| |
| /* Module Parameters */ |
| static int phys_dma = 1; |
| module_param(phys_dma, int, 0444); |
| MODULE_PARM_DESC(phys_dma, "Enable physical dma (default = 1)."); |
| |
| static void dma_trm_tasklet(unsigned long data); |
| static void dma_trm_reset(struct dma_trm_ctx *d); |
| |
| static int alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d, |
| enum context_type type, int ctx, int num_desc, |
| int buf_size, int split_buf_size, int context_base); |
| static void stop_dma_rcv_ctx(struct dma_rcv_ctx *d); |
| static void free_dma_rcv_ctx(struct dma_rcv_ctx *d); |
| |
| static int alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d, |
| enum context_type type, int ctx, int num_desc, |
| int context_base); |
| |
| static void ohci1394_pci_remove(struct pci_dev *pdev); |
| |
| #ifndef __LITTLE_ENDIAN |
| const static size_t hdr_sizes[] = { |
| 3, /* TCODE_WRITEQ */ |
| 4, /* TCODE_WRITEB */ |
| 3, /* TCODE_WRITE_RESPONSE */ |
| 0, /* reserved */ |
| 3, /* TCODE_READQ */ |
| 4, /* TCODE_READB */ |
| 3, /* TCODE_READQ_RESPONSE */ |
| 4, /* TCODE_READB_RESPONSE */ |
| 1, /* TCODE_CYCLE_START */ |
| 4, /* TCODE_LOCK_REQUEST */ |
| 2, /* TCODE_ISO_DATA */ |
| 4, /* TCODE_LOCK_RESPONSE */ |
| /* rest is reserved or link-internal */ |
| }; |
| |
| static inline void header_le32_to_cpu(quadlet_t *data, unsigned char tcode) |
| { |
| size_t size; |
| |
| if (unlikely(tcode >= ARRAY_SIZE(hdr_sizes))) |
| return; |
| |
| size = hdr_sizes[tcode]; |
| while (size--) |
| data[size] = le32_to_cpu(data[size]); |
| } |
| #else |
| #define header_le32_to_cpu(w,x) do {} while (0) |
| #endif /* !LITTLE_ENDIAN */ |
| |
| /*********************************** |
| * IEEE-1394 functionality section * |
| ***********************************/ |
| |
| static u8 get_phy_reg(struct ti_ohci *ohci, u8 addr) |
| { |
| int i; |
| unsigned long flags; |
| quadlet_t r; |
| |
| spin_lock_irqsave (&ohci->phy_reg_lock, flags); |
| |
| reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | 0x00008000); |
| |
| for (i = 0; i < OHCI_LOOP_COUNT; i++) { |
| if (reg_read(ohci, OHCI1394_PhyControl) & 0x80000000) |
| break; |
| |
| mdelay(1); |
| } |
| |
| r = reg_read(ohci, OHCI1394_PhyControl); |
| |
| if (i >= OHCI_LOOP_COUNT) |
| PRINT (KERN_ERR, "Get PHY Reg timeout [0x%08x/0x%08x/%d]", |
| r, r & 0x80000000, i); |
| |
| spin_unlock_irqrestore (&ohci->phy_reg_lock, flags); |
| |
| return (r & 0x00ff0000) >> 16; |
| } |
| |
| static void set_phy_reg(struct ti_ohci *ohci, u8 addr, u8 data) |
| { |
| int i; |
| unsigned long flags; |
| u32 r = 0; |
| |
| spin_lock_irqsave (&ohci->phy_reg_lock, flags); |
| |
| reg_write(ohci, OHCI1394_PhyControl, (addr << 8) | data | 0x00004000); |
| |
| for (i = 0; i < OHCI_LOOP_COUNT; i++) { |
| r = reg_read(ohci, OHCI1394_PhyControl); |
| if (!(r & 0x00004000)) |
| break; |
| |
| mdelay(1); |
| } |
| |
| if (i == OHCI_LOOP_COUNT) |
| PRINT (KERN_ERR, "Set PHY Reg timeout [0x%08x/0x%08x/%d]", |
| r, r & 0x00004000, i); |
| |
| spin_unlock_irqrestore (&ohci->phy_reg_lock, flags); |
| |
| return; |
| } |
| |
| /* Or's our value into the current value */ |
| static void set_phy_reg_mask(struct ti_ohci *ohci, u8 addr, u8 data) |
| { |
| u8 old; |
| |
| old = get_phy_reg (ohci, addr); |
| old |= data; |
| set_phy_reg (ohci, addr, old); |
| |
| return; |
| } |
| |
| static void handle_selfid(struct ti_ohci *ohci, struct hpsb_host *host, |
| int phyid, int isroot) |
| { |
| quadlet_t *q = ohci->selfid_buf_cpu; |
| quadlet_t self_id_count=reg_read(ohci, OHCI1394_SelfIDCount); |
| size_t size; |
| quadlet_t q0, q1; |
| |
| /* Check status of self-id reception */ |
| |
| if (ohci->selfid_swap) |
| q0 = le32_to_cpu(q[0]); |
| else |
| q0 = q[0]; |
| |
| if ((self_id_count & 0x80000000) || |
| ((self_id_count & 0x00FF0000) != (q0 & 0x00FF0000))) { |
| PRINT(KERN_ERR, |
| "Error in reception of SelfID packets [0x%08x/0x%08x] (count: %d)", |
| self_id_count, q0, ohci->self_id_errors); |
| |
| /* Tip by James Goodwin <jamesg@Filanet.com>: |
| * We had an error, generate another bus reset in response. */ |
| if (ohci->self_id_errors<OHCI1394_MAX_SELF_ID_ERRORS) { |
| set_phy_reg_mask (ohci, 1, 0x40); |
| ohci->self_id_errors++; |
| } else { |
| PRINT(KERN_ERR, |
| "Too many errors on SelfID error reception, giving up!"); |
| } |
| return; |
| } |
| |
| /* SelfID Ok, reset error counter. */ |
| ohci->self_id_errors = 0; |
| |
| size = ((self_id_count & 0x00001FFC) >> 2) - 1; |
| q++; |
| |
| while (size > 0) { |
| if (ohci->selfid_swap) { |
| q0 = le32_to_cpu(q[0]); |
| q1 = le32_to_cpu(q[1]); |
| } else { |
| q0 = q[0]; |
| q1 = q[1]; |
| } |
| |
| if (q0 == ~q1) { |
| DBGMSG ("SelfID packet 0x%x received", q0); |
| hpsb_selfid_received(host, cpu_to_be32(q0)); |
| if (((q0 & 0x3f000000) >> 24) == phyid) |
| DBGMSG ("SelfID for this node is 0x%08x", q0); |
| } else { |
| PRINT(KERN_ERR, |
| "SelfID is inconsistent [0x%08x/0x%08x]", q0, q1); |
| } |
| q += 2; |
| size -= 2; |
| } |
| |
| DBGMSG("SelfID complete"); |
| |
| return; |
| } |
| |
| static void ohci_soft_reset(struct ti_ohci *ohci) { |
| int i; |
| |
| reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_softReset); |
| |
| for (i = 0; i < OHCI_LOOP_COUNT; i++) { |
| if (!(reg_read(ohci, OHCI1394_HCControlSet) & OHCI1394_HCControl_softReset)) |
| break; |
| mdelay(1); |
| } |
| DBGMSG ("Soft reset finished"); |
| } |
| |
| |
| /* Generate the dma receive prgs and start the context */ |
| static void initialize_dma_rcv_ctx(struct dma_rcv_ctx *d, int generate_irq) |
| { |
| struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); |
| int i; |
| |
| ohci1394_stop_context(ohci, d->ctrlClear, NULL); |
| |
| for (i=0; i<d->num_desc; i++) { |
| u32 c; |
| |
| c = DMA_CTL_INPUT_MORE | DMA_CTL_UPDATE | DMA_CTL_BRANCH; |
| if (generate_irq) |
| c |= DMA_CTL_IRQ; |
| |
| d->prg_cpu[i]->control = cpu_to_le32(c | d->buf_size); |
| |
| /* End of descriptor list? */ |
| if (i + 1 < d->num_desc) { |
| d->prg_cpu[i]->branchAddress = |
| cpu_to_le32((d->prg_bus[i+1] & 0xfffffff0) | 0x1); |
| } else { |
| d->prg_cpu[i]->branchAddress = |
| cpu_to_le32((d->prg_bus[0] & 0xfffffff0)); |
| } |
| |
| d->prg_cpu[i]->address = cpu_to_le32(d->buf_bus[i]); |
| d->prg_cpu[i]->status = cpu_to_le32(d->buf_size); |
| } |
| |
| d->buf_ind = 0; |
| d->buf_offset = 0; |
| |
| if (d->type == DMA_CTX_ISO) { |
| /* Clear contextControl */ |
| reg_write(ohci, d->ctrlClear, 0xffffffff); |
| |
| /* Set bufferFill, isochHeader, multichannel for IR context */ |
| reg_write(ohci, d->ctrlSet, 0xd0000000); |
| |
| /* Set the context match register to match on all tags */ |
| reg_write(ohci, d->ctxtMatch, 0xf0000000); |
| |
| /* Clear the multi channel mask high and low registers */ |
| reg_write(ohci, OHCI1394_IRMultiChanMaskHiClear, 0xffffffff); |
| reg_write(ohci, OHCI1394_IRMultiChanMaskLoClear, 0xffffffff); |
| |
| /* Set up isoRecvIntMask to generate interrupts */ |
| reg_write(ohci, OHCI1394_IsoRecvIntMaskSet, 1 << d->ctx); |
| } |
| |
| /* Tell the controller where the first AR program is */ |
| reg_write(ohci, d->cmdPtr, d->prg_bus[0] | 0x1); |
| |
| /* Run context */ |
| reg_write(ohci, d->ctrlSet, 0x00008000); |
| |
| DBGMSG("Receive DMA ctx=%d initialized", d->ctx); |
| } |
| |
| /* Initialize the dma transmit context */ |
| static void initialize_dma_trm_ctx(struct dma_trm_ctx *d) |
| { |
| struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); |
| |
| /* Stop the context */ |
| ohci1394_stop_context(ohci, d->ctrlClear, NULL); |
| |
| d->prg_ind = 0; |
| d->sent_ind = 0; |
| d->free_prgs = d->num_desc; |
| d->branchAddrPtr = NULL; |
| INIT_LIST_HEAD(&d->fifo_list); |
| INIT_LIST_HEAD(&d->pending_list); |
| |
| if (d->type == DMA_CTX_ISO) { |
| /* enable interrupts */ |
| reg_write(ohci, OHCI1394_IsoXmitIntMaskSet, 1 << d->ctx); |
| } |
| |
| DBGMSG("Transmit DMA ctx=%d initialized", d->ctx); |
| } |
| |
| /* Count the number of available iso contexts */ |
| static int get_nb_iso_ctx(struct ti_ohci *ohci, int reg) |
| { |
| int i,ctx=0; |
| u32 tmp; |
| |
| reg_write(ohci, reg, 0xffffffff); |
| tmp = reg_read(ohci, reg); |
| |
| DBGMSG("Iso contexts reg: %08x implemented: %08x", reg, tmp); |
| |
| /* Count the number of contexts */ |
| for (i=0; i<32; i++) { |
| if (tmp & 1) ctx++; |
| tmp >>= 1; |
| } |
| return ctx; |
| } |
| |
| /* Global initialization */ |
| static void ohci_initialize(struct ti_ohci *ohci) |
| { |
| char irq_buf[16]; |
| quadlet_t buf; |
| int num_ports, i; |
| |
| spin_lock_init(&ohci->phy_reg_lock); |
| |
| /* Put some defaults to these undefined bus options */ |
| buf = reg_read(ohci, OHCI1394_BusOptions); |
| buf |= 0x60000000; /* Enable CMC and ISC */ |
| if (hpsb_disable_irm) |
| buf &= ~0x80000000; |
| else |
| buf |= 0x80000000; /* Enable IRMC */ |
| buf &= ~0x00ff0000; /* XXX: Set cyc_clk_acc to zero for now */ |
| buf &= ~0x18000000; /* Disable PMC and BMC */ |
| reg_write(ohci, OHCI1394_BusOptions, buf); |
| |
| /* Set the bus number */ |
| reg_write(ohci, OHCI1394_NodeID, 0x0000ffc0); |
| |
| /* Enable posted writes */ |
| reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_postedWriteEnable); |
| |
| /* Clear link control register */ |
| reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff); |
| |
| /* Enable cycle timer and cycle master and set the IRM |
| * contender bit in our self ID packets if appropriate. */ |
| reg_write(ohci, OHCI1394_LinkControlSet, |
| OHCI1394_LinkControl_CycleTimerEnable | |
| OHCI1394_LinkControl_CycleMaster); |
| i = get_phy_reg(ohci, 4) | PHY_04_LCTRL; |
| if (hpsb_disable_irm) |
| i &= ~PHY_04_CONTENDER; |
| else |
| i |= PHY_04_CONTENDER; |
| set_phy_reg(ohci, 4, i); |
| |
| /* Set up self-id dma buffer */ |
| reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->selfid_buf_bus); |
| |
| /* enable self-id and phys */ |
| reg_write(ohci, OHCI1394_LinkControlSet, OHCI1394_LinkControl_RcvSelfID | |
| OHCI1394_LinkControl_RcvPhyPkt); |
| |
| /* Set the Config ROM mapping register */ |
| reg_write(ohci, OHCI1394_ConfigROMmap, ohci->csr_config_rom_bus); |
| |
| /* Now get our max packet size */ |
| ohci->max_packet_size = |
| 1<<(((reg_read(ohci, OHCI1394_BusOptions)>>12)&0xf)+1); |
| |
| /* Don't accept phy packets into AR request context */ |
| reg_write(ohci, OHCI1394_LinkControlClear, 0x00000400); |
| |
| /* Clear the interrupt mask */ |
| reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff); |
| reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff); |
| |
| /* Clear the interrupt mask */ |
| reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff); |
| reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff); |
| |
| /* Initialize AR dma */ |
| initialize_dma_rcv_ctx(&ohci->ar_req_context, 0); |
| initialize_dma_rcv_ctx(&ohci->ar_resp_context, 0); |
| |
| /* Initialize AT dma */ |
| initialize_dma_trm_ctx(&ohci->at_req_context); |
| initialize_dma_trm_ctx(&ohci->at_resp_context); |
| |
| /* Initialize IR Legacy DMA channel mask */ |
| ohci->ir_legacy_channels = 0; |
| |
| /* Accept AR requests from all nodes */ |
| reg_write(ohci, OHCI1394_AsReqFilterHiSet, 0x80000000); |
| |
| /* Set the address range of the physical response unit. |
| * Most controllers do not implement it as a writable register though. |
| * They will keep a hardwired offset of 0x00010000 and show 0x0 as |
| * register content. |
| * To actually enable physical responses is the job of our interrupt |
| * handler which programs the physical request filter. */ |
| reg_write(ohci, OHCI1394_PhyUpperBound, |
| OHCI1394_PHYS_UPPER_BOUND_PROGRAMMED >> 16); |
| |
| DBGMSG("physUpperBoundOffset=%08x", |
| reg_read(ohci, OHCI1394_PhyUpperBound)); |
| |
| /* Specify AT retries */ |
| reg_write(ohci, OHCI1394_ATRetries, |
| OHCI1394_MAX_AT_REQ_RETRIES | |
| (OHCI1394_MAX_AT_RESP_RETRIES<<4) | |
| (OHCI1394_MAX_PHYS_RESP_RETRIES<<8)); |
| |
| /* We don't want hardware swapping */ |
| reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwap); |
| |
| /* Enable interrupts */ |
| reg_write(ohci, OHCI1394_IntMaskSet, |
| OHCI1394_unrecoverableError | |
| OHCI1394_masterIntEnable | |
| OHCI1394_busReset | |
| OHCI1394_selfIDComplete | |
| OHCI1394_RSPkt | |
| OHCI1394_RQPkt | |
| OHCI1394_respTxComplete | |
| OHCI1394_reqTxComplete | |
| OHCI1394_isochRx | |
| OHCI1394_isochTx | |
| OHCI1394_postedWriteErr | |
| OHCI1394_cycleTooLong | |
| OHCI1394_cycleInconsistent); |
| |
| /* Enable link */ |
| reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_linkEnable); |
| |
| buf = reg_read(ohci, OHCI1394_Version); |
| sprintf (irq_buf, "%d", ohci->dev->irq); |
| PRINT(KERN_INFO, "OHCI-1394 %d.%d (PCI): IRQ=[%s] " |
| "MMIO=[%llx-%llx] Max Packet=[%d] IR/IT contexts=[%d/%d]", |
| ((((buf) >> 16) & 0xf) + (((buf) >> 20) & 0xf) * 10), |
| ((((buf) >> 4) & 0xf) + ((buf) & 0xf) * 10), irq_buf, |
| (unsigned long long)pci_resource_start(ohci->dev, 0), |
| (unsigned long long)pci_resource_start(ohci->dev, 0) + OHCI1394_REGISTER_SIZE - 1, |
| ohci->max_packet_size, |
| ohci->nb_iso_rcv_ctx, ohci->nb_iso_xmit_ctx); |
| |
| /* Check all of our ports to make sure that if anything is |
| * connected, we enable that port. */ |
| num_ports = get_phy_reg(ohci, 2) & 0xf; |
| for (i = 0; i < num_ports; i++) { |
| unsigned int status; |
| |
| set_phy_reg(ohci, 7, i); |
| status = get_phy_reg(ohci, 8); |
| |
| if (status & 0x20) |
| set_phy_reg(ohci, 8, status & ~1); |
| } |
| |
| /* Serial EEPROM Sanity check. */ |
| if ((ohci->max_packet_size < 512) || |
| (ohci->max_packet_size > 4096)) { |
| /* Serial EEPROM contents are suspect, set a sane max packet |
| * size and print the raw contents for bug reports if verbose |
| * debug is enabled. */ |
| #ifdef CONFIG_IEEE1394_VERBOSEDEBUG |
| int i; |
| #endif |
| |
| PRINT(KERN_DEBUG, "Serial EEPROM has suspicious values, " |
| "attempting to setting max_packet_size to 512 bytes"); |
| reg_write(ohci, OHCI1394_BusOptions, |
| (reg_read(ohci, OHCI1394_BusOptions) & 0xf007) | 0x8002); |
| ohci->max_packet_size = 512; |
| #ifdef CONFIG_IEEE1394_VERBOSEDEBUG |
| PRINT(KERN_DEBUG, " EEPROM Present: %d", |
| (reg_read(ohci, OHCI1394_Version) >> 24) & 0x1); |
| reg_write(ohci, OHCI1394_GUID_ROM, 0x80000000); |
| |
| for (i = 0; |
| ((i < 1000) && |
| (reg_read(ohci, OHCI1394_GUID_ROM) & 0x80000000)); i++) |
| udelay(10); |
| |
| for (i = 0; i < 0x20; i++) { |
| reg_write(ohci, OHCI1394_GUID_ROM, 0x02000000); |
| PRINT(KERN_DEBUG, " EEPROM %02x: %02x", i, |
| (reg_read(ohci, OHCI1394_GUID_ROM) >> 16) & 0xff); |
| } |
| #endif |
| } |
| } |
| |
| /* |
| * Insert a packet in the DMA fifo and generate the DMA prg |
| * FIXME: rewrite the program in order to accept packets crossing |
| * page boundaries. |
| * check also that a single dma descriptor doesn't cross a |
| * page boundary. |
| */ |
| static void insert_packet(struct ti_ohci *ohci, |
| struct dma_trm_ctx *d, struct hpsb_packet *packet) |
| { |
| u32 cycleTimer; |
| int idx = d->prg_ind; |
| |
| DBGMSG("Inserting packet for node " NODE_BUS_FMT |
| ", tlabel=%d, tcode=0x%x, speed=%d", |
| NODE_BUS_ARGS(ohci->host, packet->node_id), packet->tlabel, |
| packet->tcode, packet->speed_code); |
| |
| d->prg_cpu[idx]->begin.address = 0; |
| d->prg_cpu[idx]->begin.branchAddress = 0; |
| |
| if (d->type == DMA_CTX_ASYNC_RESP) { |
| /* |
| * For response packets, we need to put a timeout value in |
| * the 16 lower bits of the status... let's try 1 sec timeout |
| */ |
| cycleTimer = reg_read(ohci, OHCI1394_IsochronousCycleTimer); |
| d->prg_cpu[idx]->begin.status = cpu_to_le32( |
| (((((cycleTimer>>25)&0x7)+1)&0x7)<<13) | |
| ((cycleTimer&0x01fff000)>>12)); |
| |
| DBGMSG("cycleTimer: %08x timeStamp: %08x", |
| cycleTimer, d->prg_cpu[idx]->begin.status); |
| } else |
| d->prg_cpu[idx]->begin.status = 0; |
| |
| if ( (packet->type == hpsb_async) || (packet->type == hpsb_raw) ) { |
| |
| if (packet->type == hpsb_raw) { |
| d->prg_cpu[idx]->data[0] = cpu_to_le32(OHCI1394_TCODE_PHY<<4); |
| d->prg_cpu[idx]->data[1] = cpu_to_le32(packet->header[0]); |
| d->prg_cpu[idx]->data[2] = cpu_to_le32(packet->header[1]); |
| } else { |
| d->prg_cpu[idx]->data[0] = packet->speed_code<<16 | |
| (packet->header[0] & 0xFFFF); |
| |
| if (packet->tcode == TCODE_ISO_DATA) { |
| /* Sending an async stream packet */ |
| d->prg_cpu[idx]->data[1] = packet->header[0] & 0xFFFF0000; |
| } else { |
| /* Sending a normal async request or response */ |
| d->prg_cpu[idx]->data[1] = |
| (packet->header[1] & 0xFFFF) | |
| (packet->header[0] & 0xFFFF0000); |
| d->prg_cpu[idx]->data[2] = packet->header[2]; |
| d->prg_cpu[idx]->data[3] = packet->header[3]; |
| } |
| header_le32_to_cpu(d->prg_cpu[idx]->data, packet->tcode); |
| } |
| |
| if (packet->data_size) { /* block transmit */ |
| if (packet->tcode == TCODE_STREAM_DATA){ |
| d->prg_cpu[idx]->begin.control = |
| cpu_to_le32(DMA_CTL_OUTPUT_MORE | |
| DMA_CTL_IMMEDIATE | 0x8); |
| } else { |
| d->prg_cpu[idx]->begin.control = |
| cpu_to_le32(DMA_CTL_OUTPUT_MORE | |
| DMA_CTL_IMMEDIATE | 0x10); |
| } |
| d->prg_cpu[idx]->end.control = |
| cpu_to_le32(DMA_CTL_OUTPUT_LAST | |
| DMA_CTL_IRQ | |
| DMA_CTL_BRANCH | |
| packet->data_size); |
| /* |
| * Check that the packet data buffer |
| * does not cross a page boundary. |
| * |
| * XXX Fix this some day. eth1394 seems to trigger |
| * it, but ignoring it doesn't seem to cause a |
| * problem. |
| */ |
| #if 0 |
| if (cross_bound((unsigned long)packet->data, |
| packet->data_size)>0) { |
| /* FIXME: do something about it */ |
| PRINT(KERN_ERR, |
| "%s: packet data addr: %p size %Zd bytes " |
| "cross page boundary", __FUNCTION__, |
| packet->data, packet->data_size); |
| } |
| #endif |
| d->prg_cpu[idx]->end.address = cpu_to_le32( |
| pci_map_single(ohci->dev, packet->data, |
| packet->data_size, |
| PCI_DMA_TODEVICE)); |
| OHCI_DMA_ALLOC("single, block transmit packet"); |
| |
| d->prg_cpu[idx]->end.branchAddress = 0; |
| d->prg_cpu[idx]->end.status = 0; |
| if (d->branchAddrPtr) |
| *(d->branchAddrPtr) = |
| cpu_to_le32(d->prg_bus[idx] | 0x3); |
| d->branchAddrPtr = |
| &(d->prg_cpu[idx]->end.branchAddress); |
| } else { /* quadlet transmit */ |
| if (packet->type == hpsb_raw) |
| d->prg_cpu[idx]->begin.control = |
| cpu_to_le32(DMA_CTL_OUTPUT_LAST | |
| DMA_CTL_IMMEDIATE | |
| DMA_CTL_IRQ | |
| DMA_CTL_BRANCH | |
| (packet->header_size + 4)); |
| else |
| d->prg_cpu[idx]->begin.control = |
| cpu_to_le32(DMA_CTL_OUTPUT_LAST | |
| DMA_CTL_IMMEDIATE | |
| DMA_CTL_IRQ | |
| DMA_CTL_BRANCH | |
| packet->header_size); |
| |
| if (d->branchAddrPtr) |
| *(d->branchAddrPtr) = |
| cpu_to_le32(d->prg_bus[idx] | 0x2); |
| d->branchAddrPtr = |
| &(d->prg_cpu[idx]->begin.branchAddress); |
| } |
| |
| } else { /* iso packet */ |
| d->prg_cpu[idx]->data[0] = packet->speed_code<<16 | |
| (packet->header[0] & 0xFFFF); |
| d->prg_cpu[idx]->data[1] = packet->header[0] & 0xFFFF0000; |
| header_le32_to_cpu(d->prg_cpu[idx]->data, packet->tcode); |
| |
| d->prg_cpu[idx]->begin.control = |
| cpu_to_le32(DMA_CTL_OUTPUT_MORE | |
| DMA_CTL_IMMEDIATE | 0x8); |
| d->prg_cpu[idx]->end.control = |
| cpu_to_le32(DMA_CTL_OUTPUT_LAST | |
| DMA_CTL_UPDATE | |
| DMA_CTL_IRQ | |
| DMA_CTL_BRANCH | |
| packet->data_size); |
| d->prg_cpu[idx]->end.address = cpu_to_le32( |
| pci_map_single(ohci->dev, packet->data, |
| packet->data_size, PCI_DMA_TODEVICE)); |
| OHCI_DMA_ALLOC("single, iso transmit packet"); |
| |
| d->prg_cpu[idx]->end.branchAddress = 0; |
| d->prg_cpu[idx]->end.status = 0; |
| DBGMSG("Iso xmit context info: header[%08x %08x]\n" |
| " begin=%08x %08x %08x %08x\n" |
| " %08x %08x %08x %08x\n" |
| " end =%08x %08x %08x %08x", |
| d->prg_cpu[idx]->data[0], d->prg_cpu[idx]->data[1], |
| d->prg_cpu[idx]->begin.control, |
| d->prg_cpu[idx]->begin.address, |
| d->prg_cpu[idx]->begin.branchAddress, |
| d->prg_cpu[idx]->begin.status, |
| d->prg_cpu[idx]->data[0], |
| d->prg_cpu[idx]->data[1], |
| d->prg_cpu[idx]->data[2], |
| d->prg_cpu[idx]->data[3], |
| d->prg_cpu[idx]->end.control, |
| d->prg_cpu[idx]->end.address, |
| d->prg_cpu[idx]->end.branchAddress, |
| d->prg_cpu[idx]->end.status); |
| if (d->branchAddrPtr) |
| *(d->branchAddrPtr) = cpu_to_le32(d->prg_bus[idx] | 0x3); |
| d->branchAddrPtr = &(d->prg_cpu[idx]->end.branchAddress); |
| } |
| d->free_prgs--; |
| |
| /* queue the packet in the appropriate context queue */ |
| list_add_tail(&packet->driver_list, &d->fifo_list); |
| d->prg_ind = (d->prg_ind + 1) % d->num_desc; |
| } |
| |
| /* |
| * This function fills the FIFO with the (eventual) pending packets |
| * and runs or wakes up the DMA prg if necessary. |
| * |
| * The function MUST be called with the d->lock held. |
| */ |
| static void dma_trm_flush(struct ti_ohci *ohci, struct dma_trm_ctx *d) |
| { |
| struct hpsb_packet *packet, *ptmp; |
| int idx = d->prg_ind; |
| int z = 0; |
| |
| /* insert the packets into the dma fifo */ |
| list_for_each_entry_safe(packet, ptmp, &d->pending_list, driver_list) { |
| if (!d->free_prgs) |
| break; |
| |
| /* For the first packet only */ |
| if (!z) |
| z = (packet->data_size) ? 3 : 2; |
| |
| /* Insert the packet */ |
| list_del_init(&packet->driver_list); |
| insert_packet(ohci, d, packet); |
| } |
| |
| /* Nothing must have been done, either no free_prgs or no packets */ |
| if (z == 0) |
| return; |
| |
| /* Is the context running ? (should be unless it is |
| the first packet to be sent in this context) */ |
| if (!(reg_read(ohci, d->ctrlSet) & 0x8000)) { |
| u32 nodeId = reg_read(ohci, OHCI1394_NodeID); |
| |
| DBGMSG("Starting transmit DMA ctx=%d",d->ctx); |
| reg_write(ohci, d->cmdPtr, d->prg_bus[idx] | z); |
| |
| /* Check that the node id is valid, and not 63 */ |
| if (!(nodeId & 0x80000000) || (nodeId & 0x3f) == 63) |
| PRINT(KERN_ERR, "Running dma failed because Node ID is not valid"); |
| else |
| reg_write(ohci, d->ctrlSet, 0x8000); |
| } else { |
| /* Wake up the dma context if necessary */ |
| if (!(reg_read(ohci, d->ctrlSet) & 0x400)) |
| DBGMSG("Waking transmit DMA ctx=%d",d->ctx); |
| |
| /* do this always, to avoid race condition */ |
| reg_write(ohci, d->ctrlSet, 0x1000); |
| } |
| |
| return; |
| } |
| |
| /* Transmission of an async or iso packet */ |
| static int ohci_transmit(struct hpsb_host *host, struct hpsb_packet *packet) |
| { |
| struct ti_ohci *ohci = host->hostdata; |
| struct dma_trm_ctx *d; |
| unsigned long flags; |
| |
| if (packet->data_size > ohci->max_packet_size) { |
| PRINT(KERN_ERR, |
| "Transmit packet size %Zd is too big", |
| packet->data_size); |
| return -EOVERFLOW; |
| } |
| |
| /* Decide whether we have an iso, a request, or a response packet */ |
| if (packet->type == hpsb_raw) |
| d = &ohci->at_req_context; |
| else if ((packet->tcode == TCODE_ISO_DATA) && (packet->type == hpsb_iso)) { |
| /* The legacy IT DMA context is initialized on first |
| * use. However, the alloc cannot be run from |
| * interrupt context, so we bail out if that is the |
| * case. I don't see anyone sending ISO packets from |
| * interrupt context anyway... */ |
| |
| if (ohci->it_legacy_context.ohci == NULL) { |
| if (in_interrupt()) { |
| PRINT(KERN_ERR, |
| "legacy IT context cannot be initialized during interrupt"); |
| return -EINVAL; |
| } |
| |
| if (alloc_dma_trm_ctx(ohci, &ohci->it_legacy_context, |
| DMA_CTX_ISO, 0, IT_NUM_DESC, |
| OHCI1394_IsoXmitContextBase) < 0) { |
| PRINT(KERN_ERR, |
| "error initializing legacy IT context"); |
| return -ENOMEM; |
| } |
| |
| initialize_dma_trm_ctx(&ohci->it_legacy_context); |
| } |
| |
| d = &ohci->it_legacy_context; |
| } else if ((packet->tcode & 0x02) && (packet->tcode != TCODE_ISO_DATA)) |
| d = &ohci->at_resp_context; |
| else |
| d = &ohci->at_req_context; |
| |
| spin_lock_irqsave(&d->lock,flags); |
| |
| list_add_tail(&packet->driver_list, &d->pending_list); |
| |
| dma_trm_flush(ohci, d); |
| |
| spin_unlock_irqrestore(&d->lock,flags); |
| |
| return 0; |
| } |
| |
| static int ohci_devctl(struct hpsb_host *host, enum devctl_cmd cmd, int arg) |
| { |
| struct ti_ohci *ohci = host->hostdata; |
| int retval = 0; |
| unsigned long flags; |
| int phy_reg; |
| |
| switch (cmd) { |
| case RESET_BUS: |
| switch (arg) { |
| case SHORT_RESET: |
| phy_reg = get_phy_reg(ohci, 5); |
| phy_reg |= 0x40; |
| set_phy_reg(ohci, 5, phy_reg); /* set ISBR */ |
| break; |
| case LONG_RESET: |
| phy_reg = get_phy_reg(ohci, 1); |
| phy_reg |= 0x40; |
| set_phy_reg(ohci, 1, phy_reg); /* set IBR */ |
| break; |
| case SHORT_RESET_NO_FORCE_ROOT: |
| phy_reg = get_phy_reg(ohci, 1); |
| if (phy_reg & 0x80) { |
| phy_reg &= ~0x80; |
| set_phy_reg(ohci, 1, phy_reg); /* clear RHB */ |
| } |
| |
| phy_reg = get_phy_reg(ohci, 5); |
| phy_reg |= 0x40; |
| set_phy_reg(ohci, 5, phy_reg); /* set ISBR */ |
| break; |
| case LONG_RESET_NO_FORCE_ROOT: |
| phy_reg = get_phy_reg(ohci, 1); |
| phy_reg &= ~0x80; |
| phy_reg |= 0x40; |
| set_phy_reg(ohci, 1, phy_reg); /* clear RHB, set IBR */ |
| break; |
| case SHORT_RESET_FORCE_ROOT: |
| phy_reg = get_phy_reg(ohci, 1); |
| if (!(phy_reg & 0x80)) { |
| phy_reg |= 0x80; |
| set_phy_reg(ohci, 1, phy_reg); /* set RHB */ |
| } |
| |
| phy_reg = get_phy_reg(ohci, 5); |
| phy_reg |= 0x40; |
| set_phy_reg(ohci, 5, phy_reg); /* set ISBR */ |
| break; |
| case LONG_RESET_FORCE_ROOT: |
| phy_reg = get_phy_reg(ohci, 1); |
| phy_reg |= 0xc0; |
| set_phy_reg(ohci, 1, phy_reg); /* set RHB and IBR */ |
| break; |
| default: |
| retval = -1; |
| } |
| break; |
| |
| case GET_CYCLE_COUNTER: |
| retval = reg_read(ohci, OHCI1394_IsochronousCycleTimer); |
| break; |
| |
| case SET_CYCLE_COUNTER: |
| reg_write(ohci, OHCI1394_IsochronousCycleTimer, arg); |
| break; |
| |
| case SET_BUS_ID: |
| PRINT(KERN_ERR, "devctl command SET_BUS_ID err"); |
| break; |
| |
| case ACT_CYCLE_MASTER: |
| if (arg) { |
| /* check if we are root and other nodes are present */ |
| u32 nodeId = reg_read(ohci, OHCI1394_NodeID); |
| if ((nodeId & (1<<30)) && (nodeId & 0x3f)) { |
| /* |
| * enable cycleTimer, cycleMaster |
| */ |
| DBGMSG("Cycle master enabled"); |
| reg_write(ohci, OHCI1394_LinkControlSet, |
| OHCI1394_LinkControl_CycleTimerEnable | |
| OHCI1394_LinkControl_CycleMaster); |
| } |
| } else { |
| /* disable cycleTimer, cycleMaster, cycleSource */ |
| reg_write(ohci, OHCI1394_LinkControlClear, |
| OHCI1394_LinkControl_CycleTimerEnable | |
| OHCI1394_LinkControl_CycleMaster | |
| OHCI1394_LinkControl_CycleSource); |
| } |
| break; |
| |
| case CANCEL_REQUESTS: |
| DBGMSG("Cancel request received"); |
| dma_trm_reset(&ohci->at_req_context); |
| dma_trm_reset(&ohci->at_resp_context); |
| break; |
| |
| case ISO_LISTEN_CHANNEL: |
| { |
| u64 mask; |
| struct dma_rcv_ctx *d = &ohci->ir_legacy_context; |
| int ir_legacy_active; |
| |
| if (arg<0 || arg>63) { |
| PRINT(KERN_ERR, |
| "%s: IS0 listen channel %d is out of range", |
| __FUNCTION__, arg); |
| return -EFAULT; |
| } |
| |
| mask = (u64)0x1<<arg; |
| |
| spin_lock_irqsave(&ohci->IR_channel_lock, flags); |
| |
| if (ohci->ISO_channel_usage & mask) { |
| PRINT(KERN_ERR, |
| "%s: IS0 listen channel %d is already used", |
| __FUNCTION__, arg); |
| spin_unlock_irqrestore(&ohci->IR_channel_lock, flags); |
| return -EFAULT; |
| } |
| |
| ir_legacy_active = ohci->ir_legacy_channels; |
| |
| ohci->ISO_channel_usage |= mask; |
| ohci->ir_legacy_channels |= mask; |
| |
| spin_unlock_irqrestore(&ohci->IR_channel_lock, flags); |
| |
| if (!ir_legacy_active) { |
| if (ohci1394_register_iso_tasklet(ohci, |
| &ohci->ir_legacy_tasklet) < 0) { |
| PRINT(KERN_ERR, "No IR DMA context available"); |
| return -EBUSY; |
| } |
| |
| /* the IR context can be assigned to any DMA context |
| * by ohci1394_register_iso_tasklet */ |
| d->ctx = ohci->ir_legacy_tasklet.context; |
| d->ctrlSet = OHCI1394_IsoRcvContextControlSet + |
| 32*d->ctx; |
| d->ctrlClear = OHCI1394_IsoRcvContextControlClear + |
| 32*d->ctx; |
| d->cmdPtr = OHCI1394_IsoRcvCommandPtr + 32*d->ctx; |
| d->ctxtMatch = OHCI1394_IsoRcvContextMatch + 32*d->ctx; |
| |
| initialize_dma_rcv_ctx(&ohci->ir_legacy_context, 1); |
| |
| if (printk_ratelimit()) |
| DBGMSG("IR legacy activated"); |
| } |
| |
| spin_lock_irqsave(&ohci->IR_channel_lock, flags); |
| |
| if (arg>31) |
| reg_write(ohci, OHCI1394_IRMultiChanMaskHiSet, |
| 1<<(arg-32)); |
| else |
| reg_write(ohci, OHCI1394_IRMultiChanMaskLoSet, |
| 1<<arg); |
| |
| spin_unlock_irqrestore(&ohci->IR_channel_lock, flags); |
| DBGMSG("Listening enabled on channel %d", arg); |
| break; |
| } |
| case ISO_UNLISTEN_CHANNEL: |
| { |
| u64 mask; |
| |
| if (arg<0 || arg>63) { |
| PRINT(KERN_ERR, |
| "%s: IS0 unlisten channel %d is out of range", |
| __FUNCTION__, arg); |
| return -EFAULT; |
| } |
| |
| mask = (u64)0x1<<arg; |
| |
| spin_lock_irqsave(&ohci->IR_channel_lock, flags); |
| |
| if (!(ohci->ISO_channel_usage & mask)) { |
| PRINT(KERN_ERR, |
| "%s: IS0 unlisten channel %d is not used", |
| __FUNCTION__, arg); |
| spin_unlock_irqrestore(&ohci->IR_channel_lock, flags); |
| return -EFAULT; |
| } |
| |
| ohci->ISO_channel_usage &= ~mask; |
| ohci->ir_legacy_channels &= ~mask; |
| |
| if (arg>31) |
| reg_write(ohci, OHCI1394_IRMultiChanMaskHiClear, |
| 1<<(arg-32)); |
| else |
| reg_write(ohci, OHCI1394_IRMultiChanMaskLoClear, |
| 1<<arg); |
| |
| spin_unlock_irqrestore(&ohci->IR_channel_lock, flags); |
| DBGMSG("Listening disabled on channel %d", arg); |
| |
| if (ohci->ir_legacy_channels == 0) { |
| stop_dma_rcv_ctx(&ohci->ir_legacy_context); |
| DBGMSG("ISO legacy receive context stopped"); |
| } |
| |
| break; |
| } |
| default: |
| PRINT_G(KERN_ERR, "ohci_devctl cmd %d not implemented yet", |
| cmd); |
| break; |
| } |
| return retval; |
| } |
| |
| /*********************************** |
| * rawiso ISO reception * |
| ***********************************/ |
| |
| /* |
| We use either buffer-fill or packet-per-buffer DMA mode. The DMA |
| buffer is split into "blocks" (regions described by one DMA |
| descriptor). Each block must be one page or less in size, and |
| must not cross a page boundary. |
| |
| There is one little wrinkle with buffer-fill mode: a packet that |
| starts in the final block may wrap around into the first block. But |
| the user API expects all packets to be contiguous. Our solution is |
| to keep the very last page of the DMA buffer in reserve - if a |
| packet spans the gap, we copy its tail into this page. |
| */ |
| |
| struct ohci_iso_recv { |
| struct ti_ohci *ohci; |
| |
| struct ohci1394_iso_tasklet task; |
| int task_active; |
| |
| enum { BUFFER_FILL_MODE = 0, |
| PACKET_PER_BUFFER_MODE = 1 } dma_mode; |
| |
| /* memory and PCI mapping for the DMA descriptors */ |
| struct dma_prog_region prog; |
| struct dma_cmd *block; /* = (struct dma_cmd*) prog.virt */ |
| |
| /* how many DMA blocks fit in the buffer */ |
| unsigned int nblocks; |
| |
| /* stride of DMA blocks */ |
| unsigned int buf_stride; |
| |
| /* number of blocks to batch between interrupts */ |
| int block_irq_interval; |
| |
| /* block that DMA will finish next */ |
| int block_dma; |
| |
| /* (buffer-fill only) block that the reader will release next */ |
| int block_reader; |
| |
| /* (buffer-fill only) bytes of buffer the reader has released, |
| less than one block */ |
| int released_bytes; |
| |
| /* (buffer-fill only) buffer offset at which the next packet will appear */ |
| int dma_offset; |
| |
| /* OHCI DMA context control registers */ |
| u32 ContextControlSet; |
| u32 ContextControlClear; |
| u32 CommandPtr; |
| u32 ContextMatch; |
| }; |
| |
| static void ohci_iso_recv_task(unsigned long data); |
| static void ohci_iso_recv_stop(struct hpsb_iso *iso); |
| static void ohci_iso_recv_shutdown(struct hpsb_iso *iso); |
| static int ohci_iso_recv_start(struct hpsb_iso *iso, int cycle, int tag_mask, int sync); |
| static void ohci_iso_recv_program(struct hpsb_iso *iso); |
| |
| static int ohci_iso_recv_init(struct hpsb_iso *iso) |
| { |
| struct ti_ohci *ohci = iso->host->hostdata; |
| struct ohci_iso_recv *recv; |
| int ctx; |
| int ret = -ENOMEM; |
| |
| recv = kmalloc(sizeof(*recv), SLAB_KERNEL); |
| if (!recv) |
| return -ENOMEM; |
| |
| iso->hostdata = recv; |
| recv->ohci = ohci; |
| recv->task_active = 0; |
| dma_prog_region_init(&recv->prog); |
| recv->block = NULL; |
| |
| /* use buffer-fill mode, unless irq_interval is 1 |
| (note: multichannel requires buffer-fill) */ |
| |
| if (((iso->irq_interval == 1 && iso->dma_mode == HPSB_ISO_DMA_OLD_ABI) || |
| iso->dma_mode == HPSB_ISO_DMA_PACKET_PER_BUFFER) && iso->channel != -1) { |
| recv->dma_mode = PACKET_PER_BUFFER_MODE; |
| } else { |
| recv->dma_mode = BUFFER_FILL_MODE; |
| } |
| |
| /* set nblocks, buf_stride, block_irq_interval */ |
| |
| if (recv->dma_mode == BUFFER_FILL_MODE) { |
| recv->buf_stride = PAGE_SIZE; |
| |
| /* one block per page of data in the DMA buffer, minus the final guard page */ |
| recv->nblocks = iso->buf_size/PAGE_SIZE - 1; |
| if (recv->nblocks < 3) { |
| DBGMSG("ohci_iso_recv_init: DMA buffer too small"); |
| goto err; |
| } |
| |
| /* iso->irq_interval is in packets - translate that to blocks */ |
| if (iso->irq_interval == 1) |
| recv->block_irq_interval = 1; |
| else |
| recv->block_irq_interval = iso->irq_interval * |
| ((recv->nblocks+1)/iso->buf_packets); |
| if (recv->block_irq_interval*4 > recv->nblocks) |
| recv->block_irq_interval = recv->nblocks/4; |
| if (recv->block_irq_interval < 1) |
| recv->block_irq_interval = 1; |
| |
| } else { |
| int max_packet_size; |
| |
| recv->nblocks = iso->buf_packets; |
| recv->block_irq_interval = iso->irq_interval; |
| if (recv->block_irq_interval * 4 > iso->buf_packets) |
| recv->block_irq_interval = iso->buf_packets / 4; |
| if (recv->block_irq_interval < 1) |
| recv->block_irq_interval = 1; |
| |
| /* choose a buffer stride */ |
| /* must be a power of 2, and <= PAGE_SIZE */ |
| |
| max_packet_size = iso->buf_size / iso->buf_packets; |
| |
| for (recv->buf_stride = 8; recv->buf_stride < max_packet_size; |
| recv->buf_stride *= 2); |
| |
| if (recv->buf_stride*iso->buf_packets > iso->buf_size || |
| recv->buf_stride > PAGE_SIZE) { |
| /* this shouldn't happen, but anyway... */ |
| DBGMSG("ohci_iso_recv_init: problem choosing a buffer stride"); |
| goto err; |
| } |
| } |
| |
| recv->block_reader = 0; |
| recv->released_bytes = 0; |
| recv->block_dma = 0; |
| recv->dma_offset = 0; |
| |
| /* size of DMA program = one descriptor per block */ |
| if (dma_prog_region_alloc(&recv->prog, |
| sizeof(struct dma_cmd) * recv->nblocks, |
| recv->ohci->dev)) |
| goto err; |
| |
| recv->block = (struct dma_cmd*) recv->prog.kvirt; |
| |
| ohci1394_init_iso_tasklet(&recv->task, |
| iso->channel == -1 ? OHCI_ISO_MULTICHANNEL_RECEIVE : |
| OHCI_ISO_RECEIVE, |
| ohci_iso_recv_task, (unsigned long) iso); |
| |
| if (ohci1394_register_iso_tasklet(recv->ohci, &recv->task) < 0) { |
| ret = -EBUSY; |
| goto err; |
| } |
| |
| recv->task_active = 1; |
| |
| /* recv context registers are spaced 32 bytes apart */ |
| ctx = recv->task.context; |
| recv->ContextControlSet = OHCI1394_IsoRcvContextControlSet + 32 * ctx; |
| recv->ContextControlClear = OHCI1394_IsoRcvContextControlClear + 32 * ctx; |
| recv->CommandPtr = OHCI1394_IsoRcvCommandPtr + 32 * ctx; |
| recv->ContextMatch = OHCI1394_IsoRcvContextMatch + 32 * ctx; |
| |
| if (iso->channel == -1) { |
| /* clear multi-channel selection mask */ |
| reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiClear, 0xFFFFFFFF); |
| reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoClear, 0xFFFFFFFF); |
| } |
| |
| /* write the DMA program */ |
| ohci_iso_recv_program(iso); |
| |
| DBGMSG("ohci_iso_recv_init: %s mode, DMA buffer is %lu pages" |
| " (%u bytes), using %u blocks, buf_stride %u, block_irq_interval %d", |
| recv->dma_mode == BUFFER_FILL_MODE ? |
| "buffer-fill" : "packet-per-buffer", |
| iso->buf_size/PAGE_SIZE, iso->buf_size, |
| recv->nblocks, recv->buf_stride, recv->block_irq_interval); |
| |
| return 0; |
| |
| err: |
| ohci_iso_recv_shutdown(iso); |
| return ret; |
| } |
| |
| static void ohci_iso_recv_stop(struct hpsb_iso *iso) |
| { |
| struct ohci_iso_recv *recv = iso->hostdata; |
| |
| /* disable interrupts */ |
| reg_write(recv->ohci, OHCI1394_IsoRecvIntMaskClear, 1 << recv->task.context); |
| |
| /* halt DMA */ |
| ohci1394_stop_context(recv->ohci, recv->ContextControlClear, NULL); |
| } |
| |
| static void ohci_iso_recv_shutdown(struct hpsb_iso *iso) |
| { |
| struct ohci_iso_recv *recv = iso->hostdata; |
| |
| if (recv->task_active) { |
| ohci_iso_recv_stop(iso); |
| ohci1394_unregister_iso_tasklet(recv->ohci, &recv->task); |
| recv->task_active = 0; |
| } |
| |
| dma_prog_region_free(&recv->prog); |
| kfree(recv); |
| iso->hostdata = NULL; |
| } |
| |
| /* set up a "gapped" ring buffer DMA program */ |
| static void ohci_iso_recv_program(struct hpsb_iso *iso) |
| { |
| struct ohci_iso_recv *recv = iso->hostdata; |
| int blk; |
| |
| /* address of 'branch' field in previous DMA descriptor */ |
| u32 *prev_branch = NULL; |
| |
| for (blk = 0; blk < recv->nblocks; blk++) { |
| u32 control; |
| |
| /* the DMA descriptor */ |
| struct dma_cmd *cmd = &recv->block[blk]; |
| |
| /* offset of the DMA descriptor relative to the DMA prog buffer */ |
| unsigned long prog_offset = blk * sizeof(struct dma_cmd); |
| |
| /* offset of this packet's data within the DMA buffer */ |
| unsigned long buf_offset = blk * recv->buf_stride; |
| |
| if (recv->dma_mode == BUFFER_FILL_MODE) { |
| control = 2 << 28; /* INPUT_MORE */ |
| } else { |
| control = 3 << 28; /* INPUT_LAST */ |
| } |
| |
| control |= 8 << 24; /* s = 1, update xferStatus and resCount */ |
| |
| /* interrupt on last block, and at intervals */ |
| if (blk == recv->nblocks-1 || (blk % recv->block_irq_interval) == 0) { |
| control |= 3 << 20; /* want interrupt */ |
| } |
| |
| control |= 3 << 18; /* enable branch to address */ |
| control |= recv->buf_stride; |
| |
| cmd->control = cpu_to_le32(control); |
| cmd->address = cpu_to_le32(dma_region_offset_to_bus(&iso->data_buf, buf_offset)); |
| cmd->branchAddress = 0; /* filled in on next loop */ |
| cmd->status = cpu_to_le32(recv->buf_stride); |
| |
| /* link the previous descriptor to this one */ |
| if (prev_branch) { |
| *prev_branch = cpu_to_le32(dma_prog_region_offset_to_bus(&recv->prog, prog_offset) | 1); |
| } |
| |
| prev_branch = &cmd->branchAddress; |
| } |
| |
| /* the final descriptor's branch address and Z should be left at 0 */ |
| } |
| |
| /* listen or unlisten to a specific channel (multi-channel mode only) */ |
| static void ohci_iso_recv_change_channel(struct hpsb_iso *iso, unsigned char channel, int listen) |
| { |
| struct ohci_iso_recv *recv = iso->hostdata; |
| int reg, i; |
| |
| if (channel < 32) { |
| reg = listen ? OHCI1394_IRMultiChanMaskLoSet : OHCI1394_IRMultiChanMaskLoClear; |
| i = channel; |
| } else { |
| reg = listen ? OHCI1394_IRMultiChanMaskHiSet : OHCI1394_IRMultiChanMaskHiClear; |
| i = channel - 32; |
| } |
| |
| reg_write(recv->ohci, reg, (1 << i)); |
| |
| /* issue a dummy read to force all PCI writes to be posted immediately */ |
| mb(); |
| reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer); |
| } |
| |
| static void ohci_iso_recv_set_channel_mask(struct hpsb_iso *iso, u64 mask) |
| { |
| struct ohci_iso_recv *recv = iso->hostdata; |
| int i; |
| |
| for (i = 0; i < 64; i++) { |
| if (mask & (1ULL << i)) { |
| if (i < 32) |
| reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoSet, (1 << i)); |
| else |
| reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiSet, (1 << (i-32))); |
| } else { |
| if (i < 32) |
| reg_write(recv->ohci, OHCI1394_IRMultiChanMaskLoClear, (1 << i)); |
| else |
| reg_write(recv->ohci, OHCI1394_IRMultiChanMaskHiClear, (1 << (i-32))); |
| } |
| } |
| |
| /* issue a dummy read to force all PCI writes to be posted immediately */ |
| mb(); |
| reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer); |
| } |
| |
| static int ohci_iso_recv_start(struct hpsb_iso *iso, int cycle, int tag_mask, int sync) |
| { |
| struct ohci_iso_recv *recv = iso->hostdata; |
| struct ti_ohci *ohci = recv->ohci; |
| u32 command, contextMatch; |
| |
| reg_write(recv->ohci, recv->ContextControlClear, 0xFFFFFFFF); |
| wmb(); |
| |
| /* always keep ISO headers */ |
| command = (1 << 30); |
| |
| if (recv->dma_mode == BUFFER_FILL_MODE) |
| command |= (1 << 31); |
| |
| reg_write(recv->ohci, recv->ContextControlSet, command); |
| |
| /* match on specified tags */ |
| contextMatch = tag_mask << 28; |
| |
| if (iso->channel == -1) { |
| /* enable multichannel reception */ |
| reg_write(recv->ohci, recv->ContextControlSet, (1 << 28)); |
| } else { |
| /* listen on channel */ |
| contextMatch |= iso->channel; |
| } |
| |
| if (cycle != -1) { |
| u32 seconds; |
| |
| /* enable cycleMatch */ |
| reg_write(recv->ohci, recv->ContextControlSet, (1 << 29)); |
| |
| /* set starting cycle */ |
| cycle &= 0x1FFF; |
| |
| /* 'cycle' is only mod 8000, but we also need two 'seconds' bits - |
| just snarf them from the current time */ |
| seconds = reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer) >> 25; |
| |
| /* advance one second to give some extra time for DMA to start */ |
| seconds += 1; |
| |
| cycle |= (seconds & 3) << 13; |
| |
| contextMatch |= cycle << 12; |
| } |
| |
| if (sync != -1) { |
| /* set sync flag on first DMA descriptor */ |
| struct dma_cmd *cmd = &recv->block[recv->block_dma]; |
| cmd->control |= cpu_to_le32(DMA_CTL_WAIT); |
| |
| /* match sync field */ |
| contextMatch |= (sync&0xf)<<8; |
| } |
| |
| reg_write(recv->ohci, recv->ContextMatch, contextMatch); |
| |
| /* address of first descriptor block */ |
| command = dma_prog_region_offset_to_bus(&recv->prog, |
| recv->block_dma * sizeof(struct dma_cmd)); |
| command |= 1; /* Z=1 */ |
| |
| reg_write(recv->ohci, recv->CommandPtr, command); |
| |
| /* enable interrupts */ |
| reg_write(recv->ohci, OHCI1394_IsoRecvIntMaskSet, 1 << recv->task.context); |
| |
| wmb(); |
| |
| /* run */ |
| reg_write(recv->ohci, recv->ContextControlSet, 0x8000); |
| |
| /* issue a dummy read of the cycle timer register to force |
| all PCI writes to be posted immediately */ |
| mb(); |
| reg_read(recv->ohci, OHCI1394_IsochronousCycleTimer); |
| |
| /* check RUN */ |
| if (!(reg_read(recv->ohci, recv->ContextControlSet) & 0x8000)) { |
| PRINT(KERN_ERR, |
| "Error starting IR DMA (ContextControl 0x%08x)\n", |
| reg_read(recv->ohci, recv->ContextControlSet)); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static void ohci_iso_recv_release_block(struct ohci_iso_recv *recv, int block) |
| { |
| /* re-use the DMA descriptor for the block */ |
| /* by linking the previous descriptor to it */ |
| |
| int next_i = block; |
| int prev_i = (next_i == 0) ? (recv->nblocks - 1) : (next_i - 1); |
| |
| struct dma_cmd *next = &recv->block[next_i]; |
| struct dma_cmd *prev = &recv->block[prev_i]; |
| |
| /* ignore out-of-range requests */ |
| if ((block < 0) || (block > recv->nblocks)) |
| return; |
| |
| /* 'next' becomes the new end of the DMA chain, |
| so disable branch and enable interrupt */ |
| next->branchAddress = 0; |
| next->control |= cpu_to_le32(3 << 20); |
| next->status = cpu_to_le32(recv->buf_stride); |
| |
| /* link prev to next */ |
| prev->branchAddress = cpu_to_le32(dma_prog_region_offset_to_bus(&recv->prog, |
| sizeof(struct dma_cmd) * next_i) |
| | 1); /* Z=1 */ |
| |
| /* disable interrupt on previous DMA descriptor, except at intervals */ |
| if ((prev_i % recv->block_irq_interval) == 0) { |
| prev->control |= cpu_to_le32(3 << 20); /* enable interrupt */ |
| } else { |
| prev->control &= cpu_to_le32(~(3<<20)); /* disable interrupt */ |
| } |
| wmb(); |
| |
| /* wake up DMA in case it fell asleep */ |
| reg_write(recv->ohci, recv->ContextControlSet, (1 << 12)); |
| } |
| |
| static void ohci_iso_recv_bufferfill_release(struct ohci_iso_recv *recv, |
| struct hpsb_iso_packet_info *info) |
| { |
| /* release the memory where the packet was */ |
| recv->released_bytes += info->total_len; |
| |
| /* have we released enough memory for one block? */ |
| while (recv->released_bytes > recv->buf_stride) { |
| ohci_iso_recv_release_block(recv, recv->block_reader); |
| recv->block_reader = (recv->block_reader + 1) % recv->nblocks; |
| recv->released_bytes -= recv->buf_stride; |
| } |
| } |
| |
| static inline void ohci_iso_recv_release(struct hpsb_iso *iso, struct hpsb_iso_packet_info *info) |
| { |
| struct ohci_iso_recv *recv = iso->hostdata; |
| if (recv->dma_mode == BUFFER_FILL_MODE) { |
| ohci_iso_recv_bufferfill_release(recv, info); |
| } else { |
| ohci_iso_recv_release_block(recv, info - iso->infos); |
| } |
| } |
| |
| /* parse all packets from blocks that have been fully received */ |
| static void ohci_iso_recv_bufferfill_parse(struct hpsb_iso *iso, struct ohci_iso_recv *recv) |
| { |
| int wake = 0; |
| int runaway = 0; |
| struct ti_ohci *ohci = recv->ohci; |
| |
| while (1) { |
| /* we expect the next parsable packet to begin at recv->dma_offset */ |
| /* note: packet layout is as shown in section 10.6.1.1 of the OHCI spec */ |
| |
| unsigned int offset; |
| unsigned short len, cycle, total_len; |
| unsigned char channel, tag, sy; |
| |
| unsigned char *p = iso->data_buf.kvirt; |
| |
| unsigned int this_block = recv->dma_offset/recv->buf_stride; |
| |
| /* don't loop indefinitely */ |
| if (runaway++ > 100000) { |
| atomic_inc(&iso->overflows); |
| PRINT(KERN_ERR, |
| "IR DMA error - Runaway during buffer parsing!\n"); |
| break; |
| } |
| |
| /* stop parsing once we arrive at block_dma (i.e. don't get ahead of DMA) */ |
| if (this_block == recv->block_dma) |
| break; |
| |
| wake = 1; |
| |
| /* parse data length, tag, channel, and sy */ |
| |
| /* note: we keep our own local copies of 'len' and 'offset' |
| so the user can't mess with them by poking in the mmap area */ |
| |
| len = p[recv->dma_offset+2] | (p[recv->dma_offset+3] << 8); |
| |
| if (len > 4096) { |
| PRINT(KERN_ERR, |
| "IR DMA error - bogus 'len' value %u\n", len); |
| } |
| |
| channel = p[recv->dma_offset+1] & 0x3F; |
| tag = p[recv->dma_offset+1] >> 6; |
| sy = p[recv->dma_offset+0] & 0xF; |
| |
| /* advance to data payload */ |
| recv->dma_offset += 4; |
| |
| /* check for wrap-around */ |
| if (recv->dma_offset >= recv->buf_stride*recv->nblocks) { |
| recv->dma_offset -= recv->buf_stride*recv->nblocks; |
| } |
| |
| /* dma_offset now points to the first byte of the data payload */ |
| offset = recv->dma_offset; |
| |
| /* advance to xferStatus/timeStamp */ |
| recv->dma_offset += len; |
| |
| total_len = len + 8; /* 8 bytes header+trailer in OHCI packet */ |
| /* payload is padded to 4 bytes */ |
| if (len % 4) { |
| recv->dma_offset += 4 - (len%4); |
| total_len += 4 - (len%4); |
| } |
| |
| /* check for wrap-around */ |
| if (recv->dma_offset >= recv->buf_stride*recv->nblocks) { |
| /* uh oh, the packet data wraps from the last |
| to the first DMA block - make the packet |
| contiguous by copying its "tail" into the |
| guard page */ |
| |
| int guard_off = recv->buf_stride*recv->nblocks; |
| int tail_len = len - (guard_off - offset); |
| |
| if (tail_len > 0 && tail_len < recv->buf_stride) { |
| memcpy(iso->data_buf.kvirt + guard_off, |
| iso->data_buf.kvirt, |
| tail_len); |
| } |
| |
| recv->dma_offset -= recv->buf_stride*recv->nblocks; |
| } |
| |
| /* parse timestamp */ |
| cycle = p[recv->dma_offset+0] | (p[recv->dma_offset+1]<<8); |
| cycle &= 0x1FFF; |
| |
| /* advance to next packet */ |
| recv->dma_offset += 4; |
| |
| /* check for wrap-around */ |
| if (recv->dma_offset >= recv->buf_stride*recv->nblocks) { |
| recv->dma_offset -= recv->buf_stride*recv->nblocks; |
| } |
| |
| hpsb_iso_packet_received(iso, offset, len, total_len, cycle, channel, tag, sy); |
| } |
| |
| if (wake) |
| hpsb_iso_wake(iso); |
| } |
| |
| static void ohci_iso_recv_bufferfill_task(struct hpsb_iso *iso, struct ohci_iso_recv *recv) |
| { |
| int loop; |
| struct ti_ohci *ohci = recv->ohci; |
| |
| /* loop over all blocks */ |
| for (loop = 0; loop < recv->nblocks; loop++) { |
| |
| /* check block_dma to see if it's done */ |
| struct dma_cmd *im = &recv->block[recv->block_dma]; |
| |
| /* check the DMA descriptor for new writes to xferStatus */ |
| u16 xferstatus = le32_to_cpu(im->status) >> 16; |
| |
| /* rescount is the number of bytes *remaining to be written* in the block */ |
| u16 rescount = le32_to_cpu(im->status) & 0xFFFF; |
| |
| unsigned char event = xferstatus & 0x1F; |
| |
| if (!event) { |
| /* nothing has happened to this block yet */ |
| break; |
| } |
| |
| if (event != 0x11) { |
| atomic_inc(&iso->overflows); |
| PRINT(KERN_ERR, |
| "IR DMA error - OHCI error code 0x%02x\n", event); |
| } |
| |
| if (rescount != 0) { |
| /* the card is still writing to this block; |
| we can't touch it until it's done */ |
| break; |
| } |
| |
| /* OK, the block is finished... */ |
| |
| /* sync our view of the block */ |
| dma_region_sync_for_cpu(&iso->data_buf, recv->block_dma*recv->buf_stride, recv->buf_stride); |
| |
| /* reset the DMA descriptor */ |
| im->status = recv->buf_stride; |
| |
| /* advance block_dma */ |
| recv->block_dma = (recv->block_dma + 1) % recv->nblocks; |
| |
| if ((recv->block_dma+1) % recv->nblocks == recv->block_reader) { |
| atomic_inc(&iso->overflows); |
| DBGMSG("ISO reception overflow - " |
| "ran out of DMA blocks"); |
| } |
| } |
| |
| /* parse any packets that have arrived */ |
| ohci_iso_recv_bufferfill_parse(iso, recv); |
| } |
| |
| static void ohci_iso_recv_packetperbuf_task(struct hpsb_iso *iso, struct ohci_iso_recv *recv) |
| { |
| int count; |
| int wake = 0; |
| struct ti_ohci *ohci = recv->ohci; |
| |
| /* loop over the entire buffer */ |
| for (count = 0; count < recv->nblocks; count++) { |
| u32 packet_len = 0; |
| |
| /* pointer to the DMA descriptor */ |
| struct dma_cmd *il = ((struct dma_cmd*) recv->prog.kvirt) + iso->pkt_dma; |
| |
| /* check the DMA descriptor for new writes to xferStatus */ |
| u16 xferstatus = le32_to_cpu(il->status) >> 16; |
| u16 rescount = le32_to_cpu(il->status) & 0xFFFF; |
| |
| unsigned char event = xferstatus & 0x1F; |
| |
| if (!event) { |
| /* this packet hasn't come in yet; we are done for now */ |
| goto out; |
| } |
| |
| if (event == 0x11) { |
| /* packet received successfully! */ |
| |
| /* rescount is the number of bytes *remaining* in the packet buffer, |
| after the packet was written */ |
| packet_len = recv->buf_stride - rescount; |
| |
| } else if (event == 0x02) { |
| PRINT(KERN_ERR, "IR DMA error - packet too long for buffer\n"); |
| } else if (event) { |
| PRINT(KERN_ERR, "IR DMA error - OHCI error code 0x%02x\n", event); |
| } |
| |
| /* sync our view of the buffer */ |
| dma_region_sync_for_cpu(&iso->data_buf, iso->pkt_dma * recv->buf_stride, recv->buf_stride); |
| |
| /* record the per-packet info */ |
| { |
| /* iso header is 8 bytes ahead of the data payload */ |
| unsigned char *hdr; |
| |
| unsigned int offset; |
| unsigned short cycle; |
| unsigned char channel, tag, sy; |
| |
| offset = iso->pkt_dma * recv->buf_stride; |
| hdr = iso->data_buf.kvirt + offset; |
| |
| /* skip iso header */ |
| offset += 8; |
| packet_len -= 8; |
| |
| cycle = (hdr[0] | (hdr[1] << 8)) & 0x1FFF; |
| channel = hdr[5] & 0x3F; |
| tag = hdr[5] >> 6; |
| sy = hdr[4] & 0xF; |
| |
| hpsb_iso_packet_received(iso, offset, packet_len, |
| recv->buf_stride, cycle, channel, tag, sy); |
| } |
| |
| /* reset the DMA descriptor */ |
| il->status = recv->buf_stride; |
| |
| wake = 1; |
| recv->block_dma = iso->pkt_dma; |
| } |
| |
| out: |
| if (wake) |
| hpsb_iso_wake(iso); |
| } |
| |
| static void ohci_iso_recv_task(unsigned long data) |
| { |
| struct hpsb_iso *iso = (struct hpsb_iso*) data; |
| struct ohci_iso_recv *recv = iso->hostdata; |
| |
| if (recv->dma_mode == BUFFER_FILL_MODE) |
| ohci_iso_recv_bufferfill_task(iso, recv); |
| else |
| ohci_iso_recv_packetperbuf_task(iso, recv); |
| } |
| |
| /*********************************** |
| * rawiso ISO transmission * |
| ***********************************/ |
| |
| struct ohci_iso_xmit { |
| struct ti_ohci *ohci; |
| struct dma_prog_region prog; |
| struct ohci1394_iso_tasklet task; |
| int task_active; |
| |
| u32 ContextControlSet; |
| u32 ContextControlClear; |
| u32 CommandPtr; |
| }; |
| |
| /* transmission DMA program: |
| one OUTPUT_MORE_IMMEDIATE for the IT header |
| one OUTPUT_LAST for the buffer data */ |
| |
| struct iso_xmit_cmd { |
| struct dma_cmd output_more_immediate; |
| u8 iso_hdr[8]; |
| u32 unused[2]; |
| struct dma_cmd output_last; |
| }; |
| |
| static int ohci_iso_xmit_init(struct hpsb_iso *iso); |
| static int ohci_iso_xmit_start(struct hpsb_iso *iso, int cycle); |
| static void ohci_iso_xmit_shutdown(struct hpsb_iso *iso); |
| static void ohci_iso_xmit_task(unsigned long data); |
| |
| static int ohci_iso_xmit_init(struct hpsb_iso *iso) |
| { |
| struct ohci_iso_xmit *xmit; |
| unsigned int prog_size; |
| int ctx; |
| int ret = -ENOMEM; |
| |
| xmit = kmalloc(sizeof(*xmit), SLAB_KERNEL); |
| if (!xmit) |
| return -ENOMEM; |
| |
| iso->hostdata = xmit; |
| xmit->ohci = iso->host->hostdata; |
| xmit->task_active = 0; |
| |
| dma_prog_region_init(&xmit->prog); |
| |
| prog_size = sizeof(struct iso_xmit_cmd) * iso->buf_packets; |
| |
| if (dma_prog_region_alloc(&xmit->prog, prog_size, xmit->ohci->dev)) |
| goto err; |
| |
| ohci1394_init_iso_tasklet(&xmit->task, OHCI_ISO_TRANSMIT, |
| ohci_iso_xmit_task, (unsigned long) iso); |
| |
| if (ohci1394_register_iso_tasklet(xmit->ohci, &xmit->task) < 0) { |
| ret = -EBUSY; |
| goto err; |
| } |
| |
| xmit->task_active = 1; |
| |
| /* xmit context registers are spaced 16 bytes apart */ |
| ctx = xmit->task.context; |
| xmit->ContextControlSet = OHCI1394_IsoXmitContextControlSet + 16 * ctx; |
| xmit->ContextControlClear = OHCI1394_IsoXmitContextControlClear + 16 * ctx; |
| xmit->CommandPtr = OHCI1394_IsoXmitCommandPtr + 16 * ctx; |
| |
| return 0; |
| |
| err: |
| ohci_iso_xmit_shutdown(iso); |
| return ret; |
| } |
| |
| static void ohci_iso_xmit_stop(struct hpsb_iso *iso) |
| { |
| struct ohci_iso_xmit *xmit = iso->hostdata; |
| struct ti_ohci *ohci = xmit->ohci; |
| |
| /* disable interrupts */ |
| reg_write(xmit->ohci, OHCI1394_IsoXmitIntMaskClear, 1 << xmit->task.context); |
| |
| /* halt DMA */ |
| if (ohci1394_stop_context(xmit->ohci, xmit->ContextControlClear, NULL)) { |
| /* XXX the DMA context will lock up if you try to send too much data! */ |
| PRINT(KERN_ERR, |
| "you probably exceeded the OHCI card's bandwidth limit - " |
| "reload the module and reduce xmit bandwidth"); |
| } |
| } |
| |
| static void ohci_iso_xmit_shutdown(struct hpsb_iso *iso) |
| { |
| struct ohci_iso_xmit *xmit = iso->hostdata; |
| |
| if (xmit->task_active) { |
| ohci_iso_xmit_stop(iso); |
| ohci1394_unregister_iso_tasklet(xmit->ohci, &xmit->task); |
| xmit->task_active = 0; |
| } |
| |
| dma_prog_region_free(&xmit->prog); |
| kfree(xmit); |
| iso->hostdata = NULL; |
| } |
| |
| static void ohci_iso_xmit_task(unsigned long data) |
| { |
| struct hpsb_iso *iso = (struct hpsb_iso*) data; |
| struct ohci_iso_xmit *xmit = iso->hostdata; |
| struct ti_ohci *ohci = xmit->ohci; |
| int wake = 0; |
| int count; |
| |
| /* check the whole buffer if necessary, starting at pkt_dma */ |
| for (count = 0; count < iso->buf_packets; count++) { |
| int cycle; |
| |
| /* DMA descriptor */ |
| struct iso_xmit_cmd *cmd = dma_region_i(&xmit->prog, struct iso_xmit_cmd, iso->pkt_dma); |
| |
| /* check for new writes to xferStatus */ |
| u16 xferstatus = le32_to_cpu(cmd->output_last.status) >> 16; |
| u8 event = xferstatus & 0x1F; |
| |
| if (!event) { |
| /* packet hasn't been sent yet; we are done for now */ |
| break; |
| } |
| |
| if (event != 0x11) |
| PRINT(KERN_ERR, |
| "IT DMA error - OHCI error code 0x%02x\n", event); |
| |
| /* at least one packet went out, so wake up the writer */ |
| wake = 1; |
| |
| /* parse cycle */ |
| cycle = le32_to_cpu(cmd->output_last.status) & 0x1FFF; |
| |
| /* tell the subsystem the packet has gone out */ |
| hpsb_iso_packet_sent(iso, cycle, event != 0x11); |
| |
| /* reset the DMA descriptor for next time */ |
| cmd->output_last.status = 0; |
| } |
| |
| if (wake) |
| hpsb_iso_wake(iso); |
| } |
| |
| static int ohci_iso_xmit_queue(struct hpsb_iso *iso, struct hpsb_iso_packet_info *info) |
| { |
| struct ohci_iso_xmit *xmit = iso->hostdata; |
| struct ti_ohci *ohci = xmit->ohci; |
| |
| int next_i, prev_i; |
| struct iso_xmit_cmd *next, *prev; |
| |
| unsigned int offset; |
| unsigned short len; |
| unsigned char tag, sy; |
| |
| /* check that the packet doesn't cross a page boundary |
| (we could allow this if we added OUTPUT_MORE descriptor support) */ |
| if (cross_bound(info->offset, info->len)) { |
| PRINT(KERN_ERR, |
| "rawiso xmit: packet %u crosses a page boundary", |
| iso->first_packet); |
| return -EINVAL; |
| } |
| |
| offset = info->offset; |
| len = info->len; |
| tag = info->tag; |
| sy = info->sy; |
| |
| /* sync up the card's view of the buffer */ |
| dma_region_sync_for_device(&iso->data_buf, offset, len); |
| |
| /* append first_packet to the DMA chain */ |
| /* by linking the previous descriptor to it */ |
| /* (next will become the new end of the DMA chain) */ |
| |
| next_i = iso->first_packet; |
| prev_i = (next_i == 0) ? (iso->buf_packets - 1) : (next_i - 1); |
| |
| next = dma_region_i(&xmit->prog, struct iso_xmit_cmd, next_i); |
| prev = dma_region_i(&xmit->prog, struct iso_xmit_cmd, prev_i); |
| |
| /* set up the OUTPUT_MORE_IMMEDIATE descriptor */ |
| memset(next, 0, sizeof(struct iso_xmit_cmd)); |
| next->output_more_immediate.control = cpu_to_le32(0x02000008); |
| |
| /* ISO packet header is embedded in the OUTPUT_MORE_IMMEDIATE */ |
| |
| /* tcode = 0xA, and sy */ |
| next->iso_hdr[0] = 0xA0 | (sy & 0xF); |
| |
| /* tag and channel number */ |
| next->iso_hdr[1] = (tag << 6) | (iso->channel & 0x3F); |
| |
| /* transmission speed */ |
| next->iso_hdr[2] = iso->speed & 0x7; |
| |
| /* payload size */ |
| next->iso_hdr[6] = len & 0xFF; |
| next->iso_hdr[7] = len >> 8; |
| |
| /* set up the OUTPUT_LAST */ |
| next->output_last.control = cpu_to_le32(1 << 28); |
| next->output_last.control |= cpu_to_le32(1 << 27); /* update timeStamp */ |
| next->output_last.control |= cpu_to_le32(3 << 20); /* want interrupt */ |
| next->output_last.control |= cpu_to_le32(3 << 18); /* enable branch */ |
| next->output_last.control |= cpu_to_le32(len); |
| |
| /* payload bus address */ |
| next->output_last.address = cpu_to_le32(dma_region_offset_to_bus(&iso->data_buf, offset)); |
| |
| /* leave branchAddress at zero for now */ |
| |
| /* re-write the previous DMA descriptor to chain to this one */ |
| |
| /* set prev branch address to point to next (Z=3) */ |
| prev->output_last.branchAddress = cpu_to_le32( |
| dma_prog_region_offset_to_bus(&xmit->prog, sizeof(struct iso_xmit_cmd) * next_i) | 3); |
| |
| /* disable interrupt, unless required by the IRQ interval */ |
| if (prev_i % iso->irq_interval) { |
| prev->output_last.control &= cpu_to_le32(~(3 << 20)); /* no interrupt */ |
| } else { |
| prev->output_last.control |= cpu_to_le32(3 << 20); /* enable interrupt */ |
| } |
| |
| wmb(); |
| |
| /* wake DMA in case it is sleeping */ |
| reg_write(xmit->ohci, xmit->ContextControlSet, 1 << 12); |
| |
| /* issue a dummy read of the cycle timer to force all PCI |
| writes to be posted immediately */ |
| mb(); |
| reg_read(xmit->ohci, OHCI1394_IsochronousCycleTimer); |
| |
| return 0; |
| } |
| |
| static int ohci_iso_xmit_start(struct hpsb_iso *iso, int cycle) |
| { |
| struct ohci_iso_xmit *xmit = iso->hostdata; |
| struct ti_ohci *ohci = xmit->ohci; |
| |
| /* clear out the control register */ |
| reg_write(xmit->ohci, xmit->ContextControlClear, 0xFFFFFFFF); |
| wmb(); |
| |
| /* address and length of first descriptor block (Z=3) */ |
| reg_write(xmit->ohci, xmit->CommandPtr, |
| dma_prog_region_offset_to_bus(&xmit->prog, iso->pkt_dma * sizeof(struct iso_xmit_cmd)) | 3); |
| |
| /* cycle match */ |
| if (cycle != -1) { |
| u32 start = cycle & 0x1FFF; |
| |
| /* 'cycle' is only mod 8000, but we also need two 'seconds' bits - |
| just snarf them from the current time */ |
| u32 seconds = reg_read(xmit->ohci, OHCI1394_IsochronousCycleTimer) >> 25; |
| |
| /* advance one second to give some extra time for DMA to start */ |
| seconds += 1; |
| |
| start |= (seconds & 3) << 13; |
| |
| reg_write(xmit->ohci, xmit->ContextControlSet, 0x80000000 | (start << 16)); |
| } |
| |
| /* enable interrupts */ |
| reg_write(xmit->ohci, OHCI1394_IsoXmitIntMaskSet, 1 << xmit->task.context); |
| |
| /* run */ |
| reg_write(xmit->ohci, xmit->ContextControlSet, 0x8000); |
| mb(); |
| |
| /* wait 100 usec to give the card time to go active */ |
| udelay(100); |
| |
| /* check the RUN bit */ |
| if (!(reg_read(xmit->ohci, xmit->ContextControlSet) & 0x8000)) { |
| PRINT(KERN_ERR, "Error starting IT DMA (ContextControl 0x%08x)\n", |
| reg_read(xmit->ohci, xmit->ContextControlSet)); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int ohci_isoctl(struct hpsb_iso *iso, enum isoctl_cmd cmd, unsigned long arg) |
| { |
| |
| switch(cmd) { |
| case XMIT_INIT: |
| return ohci_iso_xmit_init(iso); |
| case XMIT_START: |
| return ohci_iso_xmit_start(iso, arg); |
| case XMIT_STOP: |
| ohci_iso_xmit_stop(iso); |
| return 0; |
| case XMIT_QUEUE: |
| return ohci_iso_xmit_queue(iso, (struct hpsb_iso_packet_info*) arg); |
| case XMIT_SHUTDOWN: |
| ohci_iso_xmit_shutdown(iso); |
| return 0; |
| |
| case RECV_INIT: |
| return ohci_iso_recv_init(iso); |
| case RECV_START: { |
| int *args = (int*) arg; |
| return ohci_iso_recv_start(iso, args[0], args[1], args[2]); |
| } |
| case RECV_STOP: |
| ohci_iso_recv_stop(iso); |
| return 0; |
| case RECV_RELEASE: |
| ohci_iso_recv_release(iso, (struct hpsb_iso_packet_info*) arg); |
| return 0; |
| case RECV_FLUSH: |
| ohci_iso_recv_task((unsigned long) iso); |
| return 0; |
| case RECV_SHUTDOWN: |
| ohci_iso_recv_shutdown(iso); |
| return 0; |
| case RECV_LISTEN_CHANNEL: |
| ohci_iso_recv_change_channel(iso, arg, 1); |
| return 0; |
| case RECV_UNLISTEN_CHANNEL: |
| ohci_iso_recv_change_channel(iso, arg, 0); |
| return 0; |
| case RECV_SET_CHANNEL_MASK: |
| ohci_iso_recv_set_channel_mask(iso, *((u64*) arg)); |
| return 0; |
| |
| default: |
| PRINT_G(KERN_ERR, "ohci_isoctl cmd %d not implemented yet", |
| cmd); |
| break; |
| } |
| return -EINVAL; |
| } |
| |
| /*************************************** |
| * IEEE-1394 functionality section END * |
| ***************************************/ |
| |
| |
| /******************************************************** |
| * Global stuff (interrupt handler, init/shutdown code) * |
| ********************************************************/ |
| |
| static void dma_trm_reset(struct dma_trm_ctx *d) |
| { |
| unsigned long flags; |
| LIST_HEAD(packet_list); |
| struct ti_ohci *ohci = d->ohci; |
| struct hpsb_packet *packet, *ptmp; |
| |
| ohci1394_stop_context(ohci, d->ctrlClear, NULL); |
| |
| /* Lock the context, reset it and release it. Move the packets |
| * that were pending in the context to packet_list and free |
| * them after releasing the lock. */ |
| |
| spin_lock_irqsave(&d->lock, flags); |
| |
| list_splice(&d->fifo_list, &packet_list); |
| list_splice(&d->pending_list, &packet_list); |
| INIT_LIST_HEAD(&d->fifo_list); |
| INIT_LIST_HEAD(&d->pending_list); |
| |
| d->branchAddrPtr = NULL; |
| d->sent_ind = d->prg_ind; |
| d->free_prgs = d->num_desc; |
| |
| spin_unlock_irqrestore(&d->lock, flags); |
| |
| if (list_empty(&packet_list)) |
| return; |
| |
| PRINT(KERN_INFO, "AT dma reset ctx=%d, aborting transmission", d->ctx); |
| |
| /* Now process subsystem callbacks for the packets from this |
| * context. */ |
| list_for_each_entry_safe(packet, ptmp, &packet_list, driver_list) { |
| list_del_init(&packet->driver_list); |
| hpsb_packet_sent(ohci->host, packet, ACKX_ABORTED); |
| } |
| } |
| |
| static void ohci_schedule_iso_tasklets(struct ti_ohci *ohci, |
| quadlet_t rx_event, |
| quadlet_t tx_event) |
| { |
| struct ohci1394_iso_tasklet *t; |
| unsigned long mask; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags); |
| |
| list_for_each_entry(t, &ohci->iso_tasklet_list, link) { |
| mask = 1 << t->context; |
| |
| if (t->type == OHCI_ISO_TRANSMIT && tx_event & mask) |
| tasklet_schedule(&t->tasklet); |
| else if (rx_event & mask) |
| tasklet_schedule(&t->tasklet); |
| } |
| |
| spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags); |
| } |
| |
| static irqreturn_t ohci_irq_handler(int irq, void *dev_id) |
| { |
| quadlet_t event, node_id; |
| struct ti_ohci *ohci = (struct ti_ohci *)dev_id; |
| struct hpsb_host *host = ohci->host; |
| int phyid = -1, isroot = 0; |
| unsigned long flags; |
| |
| /* Read and clear the interrupt event register. Don't clear |
| * the busReset event, though. This is done when we get the |
| * selfIDComplete interrupt. */ |
| spin_lock_irqsave(&ohci->event_lock, flags); |
| event = reg_read(ohci, OHCI1394_IntEventClear); |
| reg_write(ohci, OHCI1394_IntEventClear, event & ~OHCI1394_busReset); |
| spin_unlock_irqrestore(&ohci->event_lock, flags); |
| |
| if (!event) |
| return IRQ_NONE; |
| |
| /* If event is ~(u32)0 cardbus card was ejected. In this case |
| * we just return, and clean up in the ohci1394_pci_remove |
| * function. */ |
| if (event == ~(u32) 0) { |
| DBGMSG("Device removed."); |
| return IRQ_NONE; |
| } |
| |
| DBGMSG("IntEvent: %08x", event); |
| |
| if (event & OHCI1394_unrecoverableError) { |
| int ctx; |
| PRINT(KERN_ERR, "Unrecoverable error!"); |
| |
| if (reg_read(ohci, OHCI1394_AsReqTrContextControlSet) & 0x800) |
| PRINT(KERN_ERR, "Async Req Tx Context died: " |
| "ctrl[%08x] cmdptr[%08x]", |
| reg_read(ohci, OHCI1394_AsReqTrContextControlSet), |
| reg_read(ohci, OHCI1394_AsReqTrCommandPtr)); |
| |
| if (reg_read(ohci, OHCI1394_AsRspTrContextControlSet) & 0x800) |
| PRINT(KERN_ERR, "Async Rsp Tx Context died: " |
| "ctrl[%08x] cmdptr[%08x]", |
| reg_read(ohci, OHCI1394_AsRspTrContextControlSet), |
| reg_read(ohci, OHCI1394_AsRspTrCommandPtr)); |
| |
| if (reg_read(ohci, OHCI1394_AsReqRcvContextControlSet) & 0x800) |
| PRINT(KERN_ERR, "Async Req Rcv Context died: " |
| "ctrl[%08x] cmdptr[%08x]", |
| reg_read(ohci, OHCI1394_AsReqRcvContextControlSet), |
| reg_read(ohci, OHCI1394_AsReqRcvCommandPtr)); |
| |
| if (reg_read(ohci, OHCI1394_AsRspRcvContextControlSet) & 0x800) |
| PRINT(KERN_ERR, "Async Rsp Rcv Context died: " |
| "ctrl[%08x] cmdptr[%08x]", |
| reg_read(ohci, OHCI1394_AsRspRcvContextControlSet), |
| reg_read(ohci, OHCI1394_AsRspRcvCommandPtr)); |
| |
| for (ctx = 0; ctx < ohci->nb_iso_xmit_ctx; ctx++) { |
| if (reg_read(ohci, OHCI1394_IsoXmitContextControlSet + (16 * ctx)) & 0x800) |
| PRINT(KERN_ERR, "Iso Xmit %d Context died: " |
| "ctrl[%08x] cmdptr[%08x]", ctx, |
| reg_read(ohci, OHCI1394_IsoXmitContextControlSet + (16 * ctx)), |
| reg_read(ohci, OHCI1394_IsoXmitCommandPtr + (16 * ctx))); |
| } |
| |
| for (ctx = 0; ctx < ohci->nb_iso_rcv_ctx; ctx++) { |
| if (reg_read(ohci, OHCI1394_IsoRcvContextControlSet + (32 * ctx)) & 0x800) |
| PRINT(KERN_ERR, "Iso Recv %d Context died: " |
| "ctrl[%08x] cmdptr[%08x] match[%08x]", ctx, |
| reg_read(ohci, OHCI1394_IsoRcvContextControlSet + (32 * ctx)), |
| reg_read(ohci, OHCI1394_IsoRcvCommandPtr + (32 * ctx)), |
| reg_read(ohci, OHCI1394_IsoRcvContextMatch + (32 * ctx))); |
| } |
| |
| event &= ~OHCI1394_unrecoverableError; |
| } |
| if (event & OHCI1394_postedWriteErr) { |
| PRINT(KERN_ERR, "physical posted write error"); |
| /* no recovery strategy yet, had to involve protocol drivers */ |
| } |
| if (event & OHCI1394_cycleTooLong) { |
| if(printk_ratelimit()) |
| PRINT(KERN_WARNING, "isochronous cycle too long"); |
| else |
| DBGMSG("OHCI1394_cycleTooLong"); |
| reg_write(ohci, OHCI1394_LinkControlSet, |
| OHCI1394_LinkControl_CycleMaster); |
| event &= ~OHCI1394_cycleTooLong; |
| } |
| if (event & OHCI1394_cycleInconsistent) { |
| /* We subscribe to the cycleInconsistent event only to |
| * clear the corresponding event bit... otherwise, |
| * isochronous cycleMatch DMA won't work. */ |
| DBGMSG("OHCI1394_cycleInconsistent"); |
| event &= ~OHCI1394_cycleInconsistent; |
| } |
| if (event & OHCI1394_busReset) { |
| /* The busReset event bit can't be cleared during the |
| * selfID phase, so we disable busReset interrupts, to |
| * avoid burying the cpu in interrupt requests. */ |
| spin_lock_irqsave(&ohci->event_lock, flags); |
| reg_write(ohci, OHCI1394_IntMaskClear, OHCI1394_busReset); |
| |
| if (ohci->check_busreset) { |
| int loop_count = 0; |
| |
| udelay(10); |
| |
| while (reg_read(ohci, OHCI1394_IntEventSet) & OHCI1394_busReset) { |
| reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset); |
| |
| spin_unlock_irqrestore(&ohci->event_lock, flags); |
| udelay(10); |
| spin_lock_irqsave(&ohci->event_lock, flags); |
| |
| /* The loop counter check is to prevent the driver |
| * from remaining in this state forever. For the |
| * initial bus reset, the loop continues for ever |
| * and the system hangs, until some device is plugged-in |
| * or out manually into a port! The forced reset seems |
| * to solve this problem. This mainly effects nForce2. */ |
| if (loop_count > 10000) { |
| ohci_devctl(host, RESET_BUS, LONG_RESET); |
| DBGMSG("Detected bus-reset loop. Forced a bus reset!"); |
| loop_count = 0; |
| } |
| |
| loop_count++; |
| } |
| } |
| spin_unlock_irqrestore(&ohci->event_lock, flags); |
| if (!host->in_bus_reset) { |
| DBGMSG("irq_handler: Bus reset requested"); |
| |
| /* Subsystem call */ |
| hpsb_bus_reset(ohci->host); |
| } |
| event &= ~OHCI1394_busReset; |
| } |
| if (event & OHCI1394_reqTxComplete) { |
| struct dma_trm_ctx *d = &ohci->at_req_context; |
| DBGMSG("Got reqTxComplete interrupt " |
| "status=0x%08X", reg_read(ohci, d->ctrlSet)); |
| if (reg_read(ohci, d->ctrlSet) & 0x800) |
| ohci1394_stop_context(ohci, d->ctrlClear, |
| "reqTxComplete"); |
| else |
| dma_trm_tasklet((unsigned long)d); |
| //tasklet_schedule(&d->task); |
| event &= ~OHCI1394_reqTxComplete; |
| } |
| if (event & OHCI1394_respTxComplete) { |
| struct dma_trm_ctx *d = &ohci->at_resp_context; |
| DBGMSG("Got respTxComplete interrupt " |
| "status=0x%08X", reg_read(ohci, d->ctrlSet)); |
| if (reg_read(ohci, d->ctrlSet) & 0x800) |
| ohci1394_stop_context(ohci, d->ctrlClear, |
| "respTxComplete"); |
| else |
| tasklet_schedule(&d->task); |
| event &= ~OHCI1394_respTxComplete; |
| } |
| if (event & OHCI1394_RQPkt) { |
| struct dma_rcv_ctx *d = &ohci->ar_req_context; |
| DBGMSG("Got RQPkt interrupt status=0x%08X", |
| reg_read(ohci, d->ctrlSet)); |
| if (reg_read(ohci, d->ctrlSet) & 0x800) |
| ohci1394_stop_context(ohci, d->ctrlClear, "RQPkt"); |
| else |
| tasklet_schedule(&d->task); |
| event &= ~OHCI1394_RQPkt; |
| } |
| if (event & OHCI1394_RSPkt) { |
| struct dma_rcv_ctx *d = &ohci->ar_resp_context; |
| DBGMSG("Got RSPkt interrupt status=0x%08X", |
| reg_read(ohci, d->ctrlSet)); |
| if (reg_read(ohci, d->ctrlSet) & 0x800) |
| ohci1394_stop_context(ohci, d->ctrlClear, "RSPkt"); |
| else |
| tasklet_schedule(&d->task); |
| event &= ~OHCI1394_RSPkt; |
| } |
| if (event & OHCI1394_isochRx) { |
| quadlet_t rx_event; |
| |
| rx_event = reg_read(ohci, OHCI1394_IsoRecvIntEventSet); |
| reg_write(ohci, OHCI1394_IsoRecvIntEventClear, rx_event); |
| ohci_schedule_iso_tasklets(ohci, rx_event, 0); |
| event &= ~OHCI1394_isochRx; |
| } |
| if (event & OHCI1394_isochTx) { |
| quadlet_t tx_event; |
| |
| tx_event = reg_read(ohci, OHCI1394_IsoXmitIntEventSet); |
| reg_write(ohci, OHCI1394_IsoXmitIntEventClear, tx_event); |
| ohci_schedule_iso_tasklets(ohci, 0, tx_event); |
| event &= ~OHCI1394_isochTx; |
| } |
| if (event & OHCI1394_selfIDComplete) { |
| if (host->in_bus_reset) { |
| node_id = reg_read(ohci, OHCI1394_NodeID); |
| |
| if (!(node_id & 0x80000000)) { |
| PRINT(KERN_ERR, |
| "SelfID received, but NodeID invalid " |
| "(probably new bus reset occurred): %08X", |
| node_id); |
| goto selfid_not_valid; |
| } |
| |
| phyid = node_id & 0x0000003f; |
| isroot = (node_id & 0x40000000) != 0; |
| |
| DBGMSG("SelfID interrupt received " |
| "(phyid %d, %s)", phyid, |
| (isroot ? "root" : "not root")); |
| |
| handle_selfid(ohci, host, phyid, isroot); |
| |
| /* Clear the bus reset event and re-enable the |
| * busReset interrupt. */ |
| spin_lock_irqsave(&ohci->event_lock, flags); |
| reg_write(ohci, OHCI1394_IntEventClear, OHCI1394_busReset); |
| reg_write(ohci, OHCI1394_IntMaskSet, OHCI1394_busReset); |
| spin_unlock_irqrestore(&ohci->event_lock, flags); |
| |
| /* Turn on phys dma reception. |
| * |
| * TODO: Enable some sort of filtering management. |
| */ |
| if (phys_dma) { |
| reg_write(ohci, OHCI1394_PhyReqFilterHiSet, |
| 0xffffffff); |
| reg_write(ohci, OHCI1394_PhyReqFilterLoSet, |
| 0xffffffff); |
| } |
| |
| DBGMSG("PhyReqFilter=%08x%08x", |
| reg_read(ohci, OHCI1394_PhyReqFilterHiSet), |
| reg_read(ohci, OHCI1394_PhyReqFilterLoSet)); |
| |
| hpsb_selfid_complete(host, phyid, isroot); |
| } else |
| PRINT(KERN_ERR, |
| "SelfID received outside of bus reset sequence"); |
| |
| selfid_not_valid: |
| event &= ~OHCI1394_selfIDComplete; |
| } |
| |
| /* Make sure we handle everything, just in case we accidentally |
| * enabled an interrupt that we didn't write a handler for. */ |
| if (event) |
| PRINT(KERN_ERR, "Unhandled interrupt(s) 0x%08x", |
| event); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /* Put the buffer back into the dma context */ |
| static void insert_dma_buffer(struct dma_rcv_ctx *d, int idx) |
| { |
| struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); |
| DBGMSG("Inserting dma buf ctx=%d idx=%d", d->ctx, idx); |
| |
| d->prg_cpu[idx]->status = cpu_to_le32(d->buf_size); |
| d->prg_cpu[idx]->branchAddress &= le32_to_cpu(0xfffffff0); |
| idx = (idx + d->num_desc - 1 ) % d->num_desc; |
| d->prg_cpu[idx]->branchAddress |= le32_to_cpu(0x00000001); |
| |
| /* To avoid a race, ensure 1394 interface hardware sees the inserted |
| * context program descriptors before it sees the wakeup bit set. */ |
| wmb(); |
| |
| /* wake up the dma context if necessary */ |
| if (!(reg_read(ohci, d->ctrlSet) & 0x400)) { |
| PRINT(KERN_INFO, |
| "Waking dma ctx=%d ... processing is probably too slow", |
| d->ctx); |
| } |
| |
| /* do this always, to avoid race condition */ |
| reg_write(ohci, d->ctrlSet, 0x1000); |
| } |
| |
| #define cond_le32_to_cpu(data, noswap) \ |
| (noswap ? data : le32_to_cpu(data)) |
| |
| static const int TCODE_SIZE[16] = {20, 0, 16, -1, 16, 20, 20, 0, |
| -1, 0, -1, 0, -1, -1, 16, -1}; |
| |
| /* |
| * Determine the length of a packet in the buffer |
| * Optimization suggested by Pascal Drolet <pascal.drolet@informission.ca> |
| */ |
| static inline int packet_length(struct dma_rcv_ctx *d, int idx, |
| quadlet_t *buf_ptr, int offset, |
| unsigned char tcode, int noswap) |
| { |
| int length = -1; |
| |
| if (d->type == DMA_CTX_ASYNC_REQ || d->type == DMA_CTX_ASYNC_RESP) { |
| length = TCODE_SIZE[tcode]; |
| if (length == 0) { |
| if (offset + 12 >= d->buf_size) { |
| length = (cond_le32_to_cpu(d->buf_cpu[(idx + 1) % d->num_desc] |
| [3 - ((d->buf_size - offset) >> 2)], noswap) >> 16); |
| } else { |
| length = (cond_le32_to_cpu(buf_ptr[3], noswap) >> 16); |
| } |
| length += 20; |
| } |
| } else if (d->type == DMA_CTX_ISO) { |
| /* Assumption: buffer fill mode with header/trailer */ |
| length = (cond_le32_to_cpu(buf_ptr[0], noswap) >> 16) + 8; |
| } |
| |
| if (length > 0 && length % 4) |
| length += 4 - (length % 4); |
| |
| return length; |
| } |
| |
| /* Tasklet that processes dma receive buffers */ |
| static void dma_rcv_tasklet (unsigned long data) |
| { |
| struct dma_rcv_ctx *d = (struct dma_rcv_ctx*)data; |
| struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); |
| unsigned int split_left, idx, offset, rescount; |
| unsigned char tcode; |
| int length, bytes_left, ack; |
| unsigned long flags; |
| quadlet_t *buf_ptr; |
| char *split_ptr; |
| char msg[256]; |
| |
| spin_lock_irqsave(&d->lock, flags); |
| |
| idx = d->buf_ind; |
| offset = d->buf_offset; |
| buf_ptr = d->buf_cpu[idx] + offset/4; |
| |
| rescount = le32_to_cpu(d->prg_cpu[idx]->status) & 0xffff; |
| bytes_left = d->buf_size - rescount - offset; |
| |
| while (bytes_left > 0) { |
| tcode = (cond_le32_to_cpu(buf_ptr[0], ohci->no_swap_incoming) >> 4) & 0xf; |
| |
| /* packet_length() will return < 4 for an error */ |
| length = packet_length(d, idx, buf_ptr, offset, tcode, ohci->no_swap_incoming); |
| |
| if (length < 4) { /* something is wrong */ |
| sprintf(msg,"Unexpected tcode 0x%x(0x%08x) in AR ctx=%d, length=%d", |
| tcode, cond_le32_to_cpu(buf_ptr[0], ohci->no_swap_incoming), |
| d->ctx, length); |
| ohci1394_stop_context(ohci, d->ctrlClear, msg); |
| spin_unlock_irqrestore(&d->lock, flags); |
| return; |
| } |
| |
| /* The first case is where we have a packet that crosses |
| * over more than one descriptor. The next case is where |
| * it's all in the first descriptor. */ |
| if ((offset + length) > d->buf_size) { |
| DBGMSG("Split packet rcv'd"); |
| if (length > d->split_buf_size) { |
| ohci1394_stop_context(ohci, d->ctrlClear, |
| "Split packet size exceeded"); |
| d->buf_ind = idx; |
| d->buf_offset = offset; |
| spin_unlock_irqrestore(&d->lock, flags); |
| return; |
| } |
| |
| if (le32_to_cpu(d->prg_cpu[(idx+1)%d->num_desc]->status) |
| == d->buf_size) { |
| /* Other part of packet not written yet. |
| * this should never happen I think |
| * anyway we'll get it on the next call. */ |
| PRINT(KERN_INFO, |
| "Got only half a packet!"); |
| d->buf_ind = idx; |
| d->buf_offset = offset; |
| spin_unlock_irqrestore(&d->lock, flags); |
| return; |
| } |
| |
| split_left = length; |
| split_ptr = (char *)d->spb; |
| memcpy(split_ptr,buf_ptr,d->buf_size-offset); |
| split_left -= d->buf_size-offset; |
| split_ptr += d->buf_size-offset; |
| insert_dma_buffer(d, idx); |
| idx = (idx+1) % d->num_desc; |
| buf_ptr = d->buf_cpu[idx]; |
| offset=0; |
| |
| while (split_left >= d->buf_size) { |
| memcpy(split_ptr,buf_ptr,d->buf_size); |
| split_ptr += d->buf_size; |
| split_left -= d->buf_size; |
| insert_dma_buffer(d, idx); |
| idx = (idx+1) % d->num_desc; |
| buf_ptr = d->buf_cpu[idx]; |
| } |
| |
| if (split_left > 0) { |
| memcpy(split_ptr, buf_ptr, split_left); |
| offset = split_left; |
| buf_ptr += offset/4; |
| } |
| } else { |
| DBGMSG("Single packet rcv'd"); |
| memcpy(d->spb, buf_ptr, length); |
| offset += length; |
| buf_ptr += length/4; |
| if (offset==d->buf_size) { |
| insert_dma_buffer(d, idx); |
| idx = (idx+1) % d->num_desc; |
| buf_ptr = d->buf_cpu[idx]; |
| offset=0; |
| } |
| } |
| |
| /* We get one phy packet to the async descriptor for each |
| * bus reset. We always ignore it. */ |
| if (tcode != OHCI1394_TCODE_PHY) { |
| if (!ohci->no_swap_incoming) |
| header_le32_to_cpu(d->spb, tcode); |
| DBGMSG("Packet received from node" |
| " %d ack=0x%02X spd=%d tcode=0x%X" |
| " length=%d ctx=%d tlabel=%d", |
| (d->spb[1]>>16)&0x3f, |
| (cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f, |
| (cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>21)&0x3, |
| tcode, length, d->ctx, |
| (d->spb[0]>>10)&0x3f); |
| |
| ack = (((cond_le32_to_cpu(d->spb[length/4-1], ohci->no_swap_incoming)>>16)&0x1f) |
| == 0x11) ? 1 : 0; |
| |
| hpsb_packet_received(ohci->host, d->spb, |
| length-4, ack); |
| } |
| #ifdef OHCI1394_DEBUG |
| else |
| PRINT (KERN_DEBUG, "Got phy packet ctx=%d ... discarded", |
| d->ctx); |
| #endif |
| |
| rescount = le32_to_cpu(d->prg_cpu[idx]->status) & 0xffff; |
| |
| bytes_left = d->buf_size - rescount - offset; |
| |
| } |
| |
| d->buf_ind = idx; |
| d->buf_offset = offset; |
| |
| spin_unlock_irqrestore(&d->lock, flags); |
| } |
| |
| /* Bottom half that processes sent packets */ |
| static void dma_trm_tasklet (unsigned long data) |
| { |
| struct dma_trm_ctx *d = (struct dma_trm_ctx*)data; |
| struct ti_ohci *ohci = (struct ti_ohci*)(d->ohci); |
| struct hpsb_packet *packet, *ptmp; |
| unsigned long flags; |
| u32 status, ack; |
| size_t datasize; |
| |
| spin_lock_irqsave(&d->lock, flags); |
| |
| list_for_each_entry_safe(packet, ptmp, &d->fifo_list, driver_list) { |
| datasize = packet->data_size; |
| if (datasize && packet->type != hpsb_raw) |
| status = le32_to_cpu( |
| d->prg_cpu[d->sent_ind]->end.status) >> 16; |
| else |
| status = le32_to_cpu( |
| d->prg_cpu[d->sent_ind]->begin.status) >> 16; |
| |
| if (status == 0) |
| /* this packet hasn't been sent yet*/ |
| break; |
| |
| #ifdef OHCI1394_DEBUG |
| if (datasize) |
| if (((le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf) == 0xa) |
| DBGMSG("Stream packet sent to channel %d tcode=0x%X " |
| "ack=0x%X spd=%d dataLength=%d ctx=%d", |
| (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>8)&0x3f, |
| (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf, |
| status&0x1f, (status>>5)&0x3, |
| le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])>>16, |
| d->ctx); |
| else |
| DBGMSG("Packet sent to node %d tcode=0x%X tLabel=" |
| "%d ack=0x%X spd=%d dataLength=%d ctx=%d", |
| (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1])>>16)&0x3f, |
| (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>4)&0xf, |
| (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0])>>10)&0x3f, |
| status&0x1f, (status>>5)&0x3, |
| le32_to_cpu(d->prg_cpu[d->sent_ind]->data[3])>>16, |
| d->ctx); |
| else |
| DBGMSG("Packet sent to node %d tcode=0x%X tLabel=" |
| "%d ack=0x%X spd=%d data=0x%08X ctx=%d", |
| (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[1]) |
| >>16)&0x3f, |
| (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0]) |
| >>4)&0xf, |
| (le32_to_cpu(d->prg_cpu[d->sent_ind]->data[0]) |
| >>10)&0x3f, |
| status&0x1f, (status>>5)&0x3, |
| le32_to_cpu(d->prg_cpu[d->sent_ind]->data[3]), |
| d->ctx); |
| #endif |
| |
| if (status & 0x10) { |
| ack = status & 0xf; |
| } else { |
| switch (status & 0x1f) { |
| case EVT_NO_STATUS: /* that should never happen */ |
| case EVT_RESERVED_A: /* that should never happen */ |
| case EVT_LONG_PACKET: /* that should never happen */ |
| PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); |
| ack = ACKX_SEND_ERROR; |
| break; |
| case EVT_MISSING_ACK: |
| ack = ACKX_TIMEOUT; |
| break; |
| case EVT_UNDERRUN: |
| ack = ACKX_SEND_ERROR; |
| break; |
| case EVT_OVERRUN: /* that should never happen */ |
| PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); |
| ack = ACKX_SEND_ERROR; |
| break; |
| case EVT_DESCRIPTOR_READ: |
| case EVT_DATA_READ: |
| case EVT_DATA_WRITE: |
| ack = ACKX_SEND_ERROR; |
| break; |
| case EVT_BUS_RESET: /* that should never happen */ |
| PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); |
| ack = ACKX_SEND_ERROR; |
| break; |
| case EVT_TIMEOUT: |
| ack = ACKX_TIMEOUT; |
| break; |
| case EVT_TCODE_ERR: |
| ack = ACKX_SEND_ERROR; |
| break; |
| case EVT_RESERVED_B: /* that should never happen */ |
| case EVT_RESERVED_C: /* that should never happen */ |
| PRINT(KERN_WARNING, "Received OHCI evt_* error 0x%x", status & 0x1f); |
| ack = ACKX_SEND_ERROR; |
| break; |
| case EVT_UNKNOWN: |
| case EVT_FLUSHED: |
| ack = ACKX_SEND_ERROR; |
| break; |
| default: |
| PRINT(KERN_ERR, "Unhandled OHCI evt_* error 0x%x", status & 0x1f); |
| ack = ACKX_SEND_ERROR; |
| BUG(); |
| } |
| } |
| |
| list_del_init(&packet->driver_list); |
| hpsb_packet_sent(ohci->host, packet, ack); |
| |
| if (datasize) { |
| pci_unmap_single(ohci->dev, |
| cpu_to_le32(d->prg_cpu[d->sent_ind]->end.address), |
| datasize, PCI_DMA_TODEVICE); |
| OHCI_DMA_FREE("single Xmit data packet"); |
| } |
| |
| d->sent_ind = (d->sent_ind+1)%d->num_desc; |
| d->free_prgs++; |
| } |
| |
| dma_trm_flush(ohci, d); |
| |
| spin_unlock_irqrestore(&d->lock, flags); |
| } |
| |
| static void stop_dma_rcv_ctx(struct dma_rcv_ctx *d) |
| { |
| if (d->ctrlClear) { |
| ohci1394_stop_context(d->ohci, d->ctrlClear, NULL); |
| |
| if (d->type == DMA_CTX_ISO) { |
| /* disable interrupts */ |
| reg_write(d->ohci, OHCI1394_IsoRecvIntMaskClear, 1 << d->ctx); |
| ohci1394_unregister_iso_tasklet(d->ohci, &d->ohci->ir_legacy_tasklet); |
| } else { |
| tasklet_kill(&d->task); |
| } |
| } |
| } |
| |
| |
| static void free_dma_rcv_ctx(struct dma_rcv_ctx *d) |
| { |
| int i; |
| struct ti_ohci *ohci = d->ohci; |
| |
| if (ohci == NULL) |
| return; |
| |
| DBGMSG("Freeing dma_rcv_ctx %d", d->ctx); |
| |
| if (d->buf_cpu) { |
| for (i=0; i<d->num_desc; i++) |
| if (d->buf_cpu[i] && d->buf_bus[i]) { |
| pci_free_consistent( |
| ohci->dev, d->buf_size, |
| d->buf_cpu[i], d->buf_bus[i]); |
| OHCI_DMA_FREE("consistent dma_rcv buf[%d]", i); |
| } |
| kfree(d->buf_cpu); |
| kfree(d->buf_bus); |
| } |
| if (d->prg_cpu) { |
| for (i=0; i<d->num_desc; i++) |
| if (d->prg_cpu[i] && d->prg_bus[i]) { |
| pci_pool_free(d->prg_pool, d->prg_cpu[i], d->prg_bus[i]); |
| OHCI_DMA_FREE("consistent dma_rcv prg[%d]", i); |
| } |
| pci_pool_destroy(d->prg_pool); |
| OHCI_DMA_FREE("dma_rcv prg pool"); |
| kfree(d->prg_cpu); |
| kfree(d->prg_bus); |
| } |
| kfree(d->spb); |
| |
| /* Mark this context as freed. */ |
| d->ohci = NULL; |
| } |
| |
| static int |
| alloc_dma_rcv_ctx(struct ti_ohci *ohci, struct dma_rcv_ctx *d, |
| enum context_type type, int ctx, int num_desc, |
| int buf_size, int split_buf_size, int context_base) |
| { |
| int i, len; |
| static int num_allocs; |
| static char pool_name[20]; |
| |
| d->ohci = ohci; |
| d->type = type; |
| d->ctx = ctx; |
| |
| d->num_desc = num_desc; |
| d->buf_size = buf_size; |
| d->split_buf_size = split_buf_size; |
| |
| d->ctrlSet = 0; |
| d->ctrlClear = 0; |
| d->cmdPtr = 0; |
| |
| d->buf_cpu = kzalloc(d->num_desc * sizeof(*d->buf_cpu), GFP_ATOMIC); |
| d->buf_bus = kzalloc(d->num_desc * sizeof(*d->buf_bus), GFP_ATOMIC); |
| |
| if (d->buf_cpu == NULL || d->buf_bus == NULL) { |
| PRINT(KERN_ERR, "Failed to allocate dma buffer"); |
| free_dma_rcv_ctx(d); |
| return -ENOMEM; |
| } |
| |
| d->prg_cpu = kzalloc(d->num_desc * sizeof(*d->prg_cpu), GFP_ATOMIC); |
| d->prg_bus = kzalloc(d->num_desc * sizeof(*d->prg_bus), GFP_ATOMIC); |
| |
| if (d->prg_cpu == NULL || d->prg_bus == NULL) { |
| PRINT(KERN_ERR, "Failed to allocate dma prg"); |
| free_dma_rcv_ctx(d); |
| return -ENOMEM; |
| } |
| |
| d->spb = kmalloc(d->split_buf_size, GFP_ATOMIC); |
| |
| if (d->spb == NULL) { |
| PRINT(KERN_ERR, "Failed to allocate split buffer"); |
| free_dma_rcv_ctx(d); |
| return -ENOMEM; |
| } |
| |
| len = sprintf(pool_name, "ohci1394_rcv_prg"); |
| sprintf(pool_name+len, "%d", num_allocs); |
| d->prg_pool = pci_pool_create(pool_name, ohci->dev, |
| sizeof(struct dma_cmd), 4, 0); |
| if(d->prg_pool == NULL) |
| { |
| PRINT(KERN_ERR, "pci_pool_create failed for %s", pool_name); |
| free_dma_rcv_ctx(d); |
| return -ENOMEM; |
| } |
| num_allocs++; |
| |
| OHCI_DMA_ALLOC("dma_rcv prg pool"); |
| |
| for (i=0; i<d->num_desc; i++) { |
| d->buf_cpu[i] = pci_alloc_consistent(ohci->dev, |
| d->buf_size, |
| d->buf_bus+i); |
| OHCI_DMA_ALLOC("consistent dma_rcv buf[%d]", i); |
| |
| if (d->buf_cpu[i] != NULL) { |
| memset(d->buf_cpu[i], 0, d->buf_size); |
| } else { |
| PRINT(KERN_ERR, |
| "Failed to allocate dma buffer"); |
| free_dma_rcv_ctx(d); |
| return -ENOMEM; |
| } |
| |
| d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, SLAB_KERNEL, d->prg_bus+i); |
| OHCI_DMA_ALLOC("pool dma_rcv prg[%d]", i); |
| |
| if (d->prg_cpu[i] != NULL) { |
| memset(d->prg_cpu[i], 0, sizeof(struct dma_cmd)); |
| } else { |
| PRINT(KERN_ERR, |
| "Failed to allocate dma prg"); |
| free_dma_rcv_ctx(d); |
| return -ENOMEM; |
| } |
| } |
| |
| spin_lock_init(&d->lock); |
| |
| if (type == DMA_CTX_ISO) { |
| ohci1394_init_iso_tasklet(&ohci->ir_legacy_tasklet, |
| OHCI_ISO_MULTICHANNEL_RECEIVE, |
| dma_rcv_tasklet, (unsigned long) d); |
| } else { |
| d->ctrlSet = context_base + OHCI1394_ContextControlSet; |
| d->ctrlClear = context_base + OHCI1394_ContextControlClear; |
| d->cmdPtr = context_base + OHCI1394_ContextCommandPtr; |
| |
| tasklet_init (&d->task, dma_rcv_tasklet, (unsigned long) d); |
| } |
| |
| return 0; |
| } |
| |
| static void free_dma_trm_ctx(struct dma_trm_ctx *d) |
| { |
| int i; |
| struct ti_ohci *ohci = d->ohci; |
| |
| if (ohci == NULL) |
| return; |
| |
| DBGMSG("Freeing dma_trm_ctx %d", d->ctx); |
| |
| if (d->prg_cpu) { |
| for (i=0; i<d->num_desc; i++) |
| if (d->prg_cpu[i] && d->prg_bus[i]) { |
| pci_pool_free(d->prg_pool, d->prg_cpu[i], d->prg_bus[i]); |
| OHCI_DMA_FREE("pool dma_trm prg[%d]", i); |
| } |
| pci_pool_destroy(d->prg_pool); |
| OHCI_DMA_FREE("dma_trm prg pool"); |
| kfree(d->prg_cpu); |
| kfree(d->prg_bus); |
| } |
| |
| /* Mark this context as freed. */ |
| d->ohci = NULL; |
| } |
| |
| static int |
| alloc_dma_trm_ctx(struct ti_ohci *ohci, struct dma_trm_ctx *d, |
| enum context_type type, int ctx, int num_desc, |
| int context_base) |
| { |
| int i, len; |
| static char pool_name[20]; |
| static int num_allocs=0; |
| |
| d->ohci = ohci; |
| d->type = type; |
| d->ctx = ctx; |
| d->num_desc = num_desc; |
| d->ctrlSet = 0; |
| d->ctrlClear = 0; |
| d->cmdPtr = 0; |
| |
| d->prg_cpu = kzalloc(d->num_desc * sizeof(*d->prg_cpu), GFP_KERNEL); |
| d->prg_bus = kzalloc(d->num_desc * sizeof(*d->prg_bus), GFP_KERNEL); |
| |
| if (d->prg_cpu == NULL || d->prg_bus == NULL) { |
| PRINT(KERN_ERR, "Failed to allocate at dma prg"); |
| free_dma_trm_ctx(d); |
| return -ENOMEM; |
| } |
| |
| len = sprintf(pool_name, "ohci1394_trm_prg"); |
| sprintf(pool_name+len, "%d", num_allocs); |
| d->prg_pool = pci_pool_create(pool_name, ohci->dev, |
| sizeof(struct at_dma_prg), 4, 0); |
| if (d->prg_pool == NULL) { |
| PRINT(KERN_ERR, "pci_pool_create failed for %s", pool_name); |
| free_dma_trm_ctx(d); |
| return -ENOMEM; |
| } |
| num_allocs++; |
| |
| OHCI_DMA_ALLOC("dma_rcv prg pool"); |
| |
| for (i = 0; i < d->num_desc; i++) { |
| d->prg_cpu[i] = pci_pool_alloc(d->prg_pool, SLAB_KERNEL, d->prg_bus+i); |
| OHCI_DMA_ALLOC("pool dma_trm prg[%d]", i); |
| |
| if (d->prg_cpu[i] != NULL) { |
| memset(d->prg_cpu[i], 0, sizeof(struct at_dma_prg)); |
| } else { |
| PRINT(KERN_ERR, |
| "Failed to allocate at dma prg"); |
| free_dma_trm_ctx(d); |
| return -ENOMEM; |
| } |
| } |
| |
| spin_lock_init(&d->lock); |
| |
| /* initialize tasklet */ |
| if (type == DMA_CTX_ISO) { |
| ohci1394_init_iso_tasklet(&ohci->it_legacy_tasklet, OHCI_ISO_TRANSMIT, |
| dma_trm_tasklet, (unsigned long) d); |
| if (ohci1394_register_iso_tasklet(ohci, |
| &ohci->it_legacy_tasklet) < 0) { |
| PRINT(KERN_ERR, "No IT DMA context available"); |
| free_dma_trm_ctx(d); |
| return -EBUSY; |
| } |
| |
| /* IT can be assigned to any context by register_iso_tasklet */ |
| d->ctx = ohci->it_legacy_tasklet.context; |
| d->ctrlSet = OHCI1394_IsoXmitContextControlSet + 16 * d->ctx; |
| d->ctrlClear = OHCI1394_IsoXmitContextControlClear + 16 * d->ctx; |
| d->cmdPtr = OHCI1394_IsoXmitCommandPtr + 16 * d->ctx; |
| } else { |
| d->ctrlSet = context_base + OHCI1394_ContextControlSet; |
| d->ctrlClear = context_base + OHCI1394_ContextControlClear; |
| d->cmdPtr = context_base + OHCI1394_ContextCommandPtr; |
| tasklet_init (&d->task, dma_trm_tasklet, (unsigned long)d); |
| } |
| |
| return 0; |
| } |
| |
| static void ohci_set_hw_config_rom(struct hpsb_host *host, quadlet_t *config_rom) |
| { |
| struct ti_ohci *ohci = host->hostdata; |
| |
| reg_write(ohci, OHCI1394_ConfigROMhdr, be32_to_cpu(config_rom[0])); |
| reg_write(ohci, OHCI1394_BusOptions, be32_to_cpu(config_rom[2])); |
| |
| memcpy(ohci->csr_config_rom_cpu, config_rom, OHCI_CONFIG_ROM_LEN); |
| } |
| |
| |
| static quadlet_t ohci_hw_csr_reg(struct hpsb_host *host, int reg, |
| quadlet_t data, quadlet_t compare) |
| { |
| struct ti_ohci *ohci = host->hostdata; |
| int i; |
| |
| reg_write(ohci, OHCI1394_CSRData, data); |
| reg_write(ohci, OHCI1394_CSRCompareData, compare); |
| reg_write(ohci, OHCI1394_CSRControl, reg & 0x3); |
| |
| for (i = 0; i < OHCI_LOOP_COUNT; i++) { |
| if (reg_read(ohci, OHCI1394_CSRControl) & 0x80000000) |
| break; |
| |
| mdelay(1); |
| } |
| |
| return reg_read(ohci, OHCI1394_CSRData); |
| } |
| |
| static struct hpsb_host_driver ohci1394_driver = { |
| .owner = THIS_MODULE, |
| .name = OHCI1394_DRIVER_NAME, |
| .set_hw_config_rom = ohci_set_hw_config_rom, |
| .transmit_packet = ohci_transmit, |
| .devctl = ohci_devctl, |
| .isoctl = ohci_isoctl, |
| .hw_csr_reg = ohci_hw_csr_reg, |
| }; |
| |
| /*********************************** |
| * PCI Driver Interface functions * |
| ***********************************/ |
| |
| #define FAIL(err, fmt, args...) \ |
| do { \ |
| PRINT_G(KERN_ERR, fmt , ## args); \ |
| ohci1394_pci_remove(dev); \ |
| return err; \ |
| } while (0) |
| |
| static int __devinit ohci1394_pci_probe(struct pci_dev *dev, |
| const struct pci_device_id *ent) |
| { |
| struct hpsb_host *host; |
| struct ti_ohci *ohci; /* shortcut to currently handled device */ |
| resource_size_t ohci_base; |
| |
| if (pci_enable_device(dev)) |
| FAIL(-ENXIO, "Failed to enable OHCI hardware"); |
| pci_set_master(dev); |
| |
| host = hpsb_alloc_host(&ohci1394_driver, sizeof(struct ti_ohci), &dev->dev); |
| if (!host) FAIL(-ENOMEM, "Failed to allocate host structure"); |
| |
| ohci = host->hostdata; |
| ohci->dev = dev; |
| ohci->host = host; |
| ohci->init_state = OHCI_INIT_ALLOC_HOST; |
| host->pdev = dev; |
| pci_set_drvdata(dev, ohci); |
| |
| /* We don't want hardware swapping */ |
| pci_write_config_dword(dev, OHCI1394_PCI_HCI_Control, 0); |
| |
| /* Some oddball Apple controllers do not order the selfid |
| * properly, so we make up for it here. */ |
| #ifndef __LITTLE_ENDIAN |
| /* XXX: Need a better way to check this. I'm wondering if we can |
| * read the values of the OHCI1394_PCI_HCI_Control and the |
| * noByteSwapData registers to see if they were not cleared to |
| * zero. Should this work? Obviously it's not defined what these |
| * registers will read when they aren't supported. Bleh! */ |
| if (dev->vendor == PCI_VENDOR_ID_APPLE && |
| dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW) { |
| ohci->no_swap_incoming = 1; |
| ohci->selfid_swap = 0; |
| } else |
| ohci->selfid_swap = 1; |
| #endif |
| |
| |
| #ifndef PCI_DEVICE_ID_NVIDIA_NFORCE2_FW |
| #define PCI_DEVICE_ID_NVIDIA_NFORCE2_FW 0x006e |
| #endif |
| |
| /* These chipsets require a bit of extra care when checking after |
| * a busreset. */ |
| if ((dev->vendor == PCI_VENDOR_ID_APPLE && |
| dev->device == PCI_DEVICE_ID_APPLE_UNI_N_FW) || |
| (dev->vendor == PCI_VENDOR_ID_NVIDIA && |
| dev->device == PCI_DEVICE_ID_NVIDIA_NFORCE2_FW)) |
| ohci->check_busreset = 1; |
| |
| /* We hardwire the MMIO length, since some CardBus adaptors |
| * fail to report the right length. Anyway, the ohci spec |
| * clearly says it's 2kb, so this shouldn't be a problem. */ |
| ohci_base = pci_resource_start(dev, 0); |
| if (pci_resource_len(dev, 0) < OHCI1394_REGISTER_SIZE) |
| PRINT(KERN_WARNING, "PCI resource length of 0x%llx too small!", |
| (unsigned long long)pci_resource_len(dev, 0)); |
| |
| /* Seems PCMCIA handles this internally. Not sure why. Seems |
| * pretty bogus to force a driver to special case this. */ |
| #ifndef PCMCIA |
| if (!request_mem_region (ohci_base, OHCI1394_REGISTER_SIZE, OHCI1394_DRIVER_NAME)) |
| FAIL(-ENOMEM, "MMIO resource (0x%llx - 0x%llx) unavailable", |
| (unsigned long long)ohci_base, |
| (unsigned long long)ohci_base + OHCI1394_REGISTER_SIZE); |
| #endif |
| ohci->init_state = OHCI_INIT_HAVE_MEM_REGION; |
| |
| ohci->registers = ioremap(ohci_base, OHCI1394_REGISTER_SIZE); |
| if (ohci->registers == NULL) |
| FAIL(-ENXIO, "Failed to remap registers - card not accessible"); |
| ohci->init_state = OHCI_INIT_HAVE_IOMAPPING; |
| DBGMSG("Remapped memory spaces reg 0x%p", ohci->registers); |
| |
| /* csr_config rom allocation */ |
| ohci->csr_config_rom_cpu = |
| pci_alloc_consistent(ohci->dev, OHCI_CONFIG_ROM_LEN, |
| &ohci->csr_config_rom_bus); |
| OHCI_DMA_ALLOC("consistent csr_config_rom"); |
| if (ohci->csr_config_rom_cpu == NULL) |
| FAIL(-ENOMEM, "Failed to allocate buffer config rom"); |
| ohci->init_state = OHCI_INIT_HAVE_CONFIG_ROM_BUFFER; |
| |
| /* self-id dma buffer allocation */ |
| ohci->selfid_buf_cpu = |
| pci_alloc_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE, |
| &ohci->selfid_buf_bus); |
| OHCI_DMA_ALLOC("consistent selfid_buf"); |
| |
| if (ohci->selfid_buf_cpu == NULL) |
| FAIL(-ENOMEM, "Failed to allocate DMA buffer for self-id packets"); |
| ohci->init_state = OHCI_INIT_HAVE_SELFID_BUFFER; |
| |
| if ((unsigned long)ohci->selfid_buf_cpu & 0x1fff) |
| PRINT(KERN_INFO, "SelfID buffer %p is not aligned on " |
| "8Kb boundary... may cause problems on some CXD3222 chip", |
| ohci->selfid_buf_cpu); |
| |
| /* No self-id errors at startup */ |
| ohci->self_id_errors = 0; |
| |
| ohci->init_state = OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE; |
| /* AR DMA request context allocation */ |
| if (alloc_dma_rcv_ctx(ohci, &ohci->ar_req_context, |
| DMA_CTX_ASYNC_REQ, 0, AR_REQ_NUM_DESC, |
| AR_REQ_BUF_SIZE, AR_REQ_SPLIT_BUF_SIZE, |
| OHCI1394_AsReqRcvContextBase) < 0) |
| FAIL(-ENOMEM, "Failed to allocate AR Req context"); |
| |
| /* AR DMA response context allocation */ |
| if (alloc_dma_rcv_ctx(ohci, &ohci->ar_resp_context, |
| DMA_CTX_ASYNC_RESP, 0, AR_RESP_NUM_DESC, |
| AR_RESP_BUF_SIZE, AR_RESP_SPLIT_BUF_SIZE, |
| OHCI1394_AsRspRcvContextBase) < 0) |
| FAIL(-ENOMEM, "Failed to allocate AR Resp context"); |
| |
| /* AT DMA request context */ |
| if (alloc_dma_trm_ctx(ohci, &ohci->at_req_context, |
| DMA_CTX_ASYNC_REQ, 0, AT_REQ_NUM_DESC, |
| OHCI1394_AsReqTrContextBase) < 0) |
| FAIL(-ENOMEM, "Failed to allocate AT Req context"); |
| |
| /* AT DMA response context */ |
| if (alloc_dma_trm_ctx(ohci, &ohci->at_resp_context, |
| DMA_CTX_ASYNC_RESP, 1, AT_RESP_NUM_DESC, |
| OHCI1394_AsRspTrContextBase) < 0) |
| FAIL(-ENOMEM, "Failed to allocate AT Resp context"); |
| |
| /* Start off with a soft reset, to clear everything to a sane |
| * state. */ |
| ohci_soft_reset(ohci); |
| |
| /* Now enable LPS, which we need in order to start accessing |
| * most of the registers. In fact, on some cards (ALI M5251), |
| * accessing registers in the SClk domain without LPS enabled |
| * will lock up the machine. Wait 50msec to make sure we have |
| * full link enabled. */ |
| reg_write(ohci, OHCI1394_HCControlSet, OHCI1394_HCControl_LPS); |
| |
| /* Disable and clear interrupts */ |
| reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); |
| reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); |
| |
| mdelay(50); |
| |
| /* Determine the number of available IR and IT contexts. */ |
| ohci->nb_iso_rcv_ctx = |
| get_nb_iso_ctx(ohci, OHCI1394_IsoRecvIntMaskSet); |
| ohci->nb_iso_xmit_ctx = |
| get_nb_iso_ctx(ohci, OHCI1394_IsoXmitIntMaskSet); |
| |
| /* Set the usage bits for non-existent contexts so they can't |
| * be allocated */ |
| ohci->ir_ctx_usage = ~0 << ohci->nb_iso_rcv_ctx; |
| ohci->it_ctx_usage = ~0 << ohci->nb_iso_xmit_ctx; |
| |
| INIT_LIST_HEAD(&ohci->iso_tasklet_list); |
| spin_lock_init(&ohci->iso_tasklet_list_lock); |
| ohci->ISO_channel_usage = 0; |
| spin_lock_init(&ohci->IR_channel_lock); |
| |
| /* Allocate the IR DMA context right here so we don't have |
| * to do it in interrupt path - note that this doesn't |
| * waste much memory and avoids the jugglery required to |
| * allocate it in IRQ path. */ |
| if (alloc_dma_rcv_ctx(ohci, &ohci->ir_legacy_context, |
| DMA_CTX_ISO, 0, IR_NUM_DESC, |
| IR_BUF_SIZE, IR_SPLIT_BUF_SIZE, |
| OHCI1394_IsoRcvContextBase) < 0) { |
| FAIL(-ENOMEM, "Cannot allocate IR Legacy DMA context"); |
| } |
| |
| /* We hopefully don't have to pre-allocate IT DMA like we did |
| * for IR DMA above. Allocate it on-demand and mark inactive. */ |
| ohci->it_legacy_context.ohci = NULL; |
| spin_lock_init(&ohci->event_lock); |
| |
| /* |
| * interrupts are disabled, all right, but... due to IRQF_SHARED we |
| * might get called anyway. We'll see no event, of course, but |
| * we need to get to that "no event", so enough should be initialized |
| * by that point. |
| */ |
| if (request_irq(dev->irq, ohci_irq_handler, IRQF_SHARED, |
| OHCI1394_DRIVER_NAME, ohci)) |
| FAIL(-ENOMEM, "Failed to allocate shared interrupt %d", dev->irq); |
| |
| ohci->init_state = OHCI_INIT_HAVE_IRQ; |
| ohci_initialize(ohci); |
| |
| /* Set certain csr values */ |
| host->csr.guid_hi = reg_read(ohci, OHCI1394_GUIDHi); |
| host->csr.guid_lo = reg_read(ohci, OHCI1394_GUIDLo); |
| host->csr.cyc_clk_acc = 100; /* how do we determine clk accuracy? */ |
| host->csr.max_rec = (reg_read(ohci, OHCI1394_BusOptions) >> 12) & 0xf; |
| host->csr.lnk_spd = reg_read(ohci, OHCI1394_BusOptions) & 0x7; |
| |
| if (phys_dma) { |
| host->low_addr_space = |
| (u64) reg_read(ohci, OHCI1394_PhyUpperBound) << 16; |
| if (!host->low_addr_space) |
| host->low_addr_space = OHCI1394_PHYS_UPPER_BOUND_FIXED; |
| } |
| host->middle_addr_space = OHCI1394_MIDDLE_ADDRESS_SPACE; |
| |
| /* Tell the highlevel this host is ready */ |
| if (hpsb_add_host(host)) |
| FAIL(-ENOMEM, "Failed to register host with highlevel"); |
| |
| ohci->init_state = OHCI_INIT_DONE; |
| |
| return 0; |
| #undef FAIL |
| } |
| |
| static void ohci1394_pci_remove(struct pci_dev *pdev) |
| { |
| struct ti_ohci *ohci; |
| struct device *dev; |
| |
| ohci = pci_get_drvdata(pdev); |
| if (!ohci) |
| return; |
| |
| dev = get_device(&ohci->host->device); |
| |
| switch (ohci->init_state) { |
| case OHCI_INIT_DONE: |
| hpsb_remove_host(ohci->host); |
| |
| /* Clear out BUS Options */ |
| reg_write(ohci, OHCI1394_ConfigROMhdr, 0); |
| reg_write(ohci, OHCI1394_BusOptions, |
| (reg_read(ohci, OHCI1394_BusOptions) & 0x0000f007) | |
| 0x00ff0000); |
| memset(ohci->csr_config_rom_cpu, 0, OHCI_CONFIG_ROM_LEN); |
| |
| case OHCI_INIT_HAVE_IRQ: |
| /* Clear interrupt registers */ |
| reg_write(ohci, OHCI1394_IntMaskClear, 0xffffffff); |
| reg_write(ohci, OHCI1394_IntEventClear, 0xffffffff); |
| reg_write(ohci, OHCI1394_IsoXmitIntMaskClear, 0xffffffff); |
| reg_write(ohci, OHCI1394_IsoXmitIntEventClear, 0xffffffff); |
| reg_write(ohci, OHCI1394_IsoRecvIntMaskClear, 0xffffffff); |
| reg_write(ohci, OHCI1394_IsoRecvIntEventClear, 0xffffffff); |
| |
| /* Disable IRM Contender */ |
| set_phy_reg(ohci, 4, ~0xc0 & get_phy_reg(ohci, 4)); |
| |
| /* Clear link control register */ |
| reg_write(ohci, OHCI1394_LinkControlClear, 0xffffffff); |
| |
| /* Let all other nodes know to ignore us */ |
| ohci_devctl(ohci->host, RESET_BUS, LONG_RESET_NO_FORCE_ROOT); |
| |
| /* Soft reset before we start - this disables |
| * interrupts and clears linkEnable and LPS. */ |
| ohci_soft_reset(ohci); |
| free_irq(ohci->dev->irq, ohci); |
| |
| case OHCI_INIT_HAVE_TXRX_BUFFERS__MAYBE: |
| /* The ohci_soft_reset() stops all DMA contexts, so we |
| * dont need to do this. */ |
| free_dma_rcv_ctx(&ohci->ar_req_context); |
| free_dma_rcv_ctx(&ohci->ar_resp_context); |
| free_dma_trm_ctx(&ohci->at_req_context); |
| free_dma_trm_ctx(&ohci->at_resp_context); |
| free_dma_rcv_ctx(&ohci->ir_legacy_context); |
| free_dma_trm_ctx(&ohci->it_legacy_context); |
| |
| case OHCI_INIT_HAVE_SELFID_BUFFER: |
| pci_free_consistent(ohci->dev, OHCI1394_SI_DMA_BUF_SIZE, |
| ohci->selfid_buf_cpu, |
| ohci->selfid_buf_bus); |
| OHCI_DMA_FREE("consistent selfid_buf"); |
| |
| case OHCI_INIT_HAVE_CONFIG_ROM_BUFFER: |
| pci_free_consistent(ohci->dev, OHCI_CONFIG_ROM_LEN, |
| ohci->csr_config_rom_cpu, |
| ohci->csr_config_rom_bus); |
| OHCI_DMA_FREE("consistent csr_config_rom"); |
| |
| case OHCI_INIT_HAVE_IOMAPPING: |
| iounmap(ohci->registers); |
| |
| case OHCI_INIT_HAVE_MEM_REGION: |
| #ifndef PCMCIA |
| release_mem_region(pci_resource_start(ohci->dev, 0), |
| OHCI1394_REGISTER_SIZE); |
| #endif |
| |
| #ifdef CONFIG_PPC_PMAC |
| /* On UniNorth, power down the cable and turn off the chip |
| * clock when the module is removed to save power on |
| * laptops. Turning it back ON is done by the arch code when |
| * pci_enable_device() is called */ |
| { |
| struct device_node* of_node; |
| |
| of_node = pci_device_to_OF_node(ohci->dev); |
| if (of_node) { |
| pmac_call_feature(PMAC_FTR_1394_ENABLE, of_node, 0, 0); |
| pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, of_node, 0, 0); |
| } |
| } |
| #endif /* CONFIG_PPC_PMAC */ |
| |
| case OHCI_INIT_ALLOC_HOST: |
| pci_set_drvdata(ohci->dev, NULL); |
| } |
| |
| if (dev) |
| put_device(dev); |
| } |
| |
| #ifdef CONFIG_PM |
| static int ohci1394_pci_resume (struct pci_dev *pdev) |
| { |
| /* PowerMac resume code comes first */ |
| #ifdef CONFIG_PPC_PMAC |
| if (machine_is(powermac)) { |
| struct device_node *of_node; |
| |
| /* Re-enable 1394 */ |
| of_node = pci_device_to_OF_node (pdev); |
| if (of_node) |
| pmac_call_feature (PMAC_FTR_1394_ENABLE, of_node, 0, 1); |
| } |
| #endif /* CONFIG_PPC_PMAC */ |
| |
| pci_set_power_state(pdev, PCI_D0); |
| pci_restore_state(pdev); |
| return pci_enable_device(pdev); |
| } |
| |
| static int ohci1394_pci_suspend (struct pci_dev *pdev, pm_message_t state) |
| { |
| int err; |
| |
| printk(KERN_INFO "%s does not fully support suspend and resume yet\n", |
| OHCI1394_DRIVER_NAME); |
| |
| err = pci_save_state(pdev); |
| if (err) { |
| printk(KERN_ERR "%s: pci_save_state failed with %d\n", |
| OHCI1394_DRIVER_NAME, err); |
| return err; |
| } |
| err = pci_set_power_state(pdev, pci_choose_state(pdev, state)); |
| #ifdef OHCI1394_DEBUG |
| if (err) |
| printk(KERN_DEBUG "%s: pci_set_power_state failed with %d\n", |
| OHCI1394_DRIVER_NAME, err); |
| #endif /* OHCI1394_DEBUG */ |
| |
| /* PowerMac suspend code comes last */ |
| #ifdef CONFIG_PPC_PMAC |
| if (machine_is(powermac)) { |
| struct device_node *of_node; |
| |
| /* Disable 1394 */ |
| of_node = pci_device_to_OF_node (pdev); |
| if (of_node) |
| pmac_call_feature(PMAC_FTR_1394_ENABLE, of_node, 0, 0); |
| } |
| #endif /* CONFIG_PPC_PMAC */ |
| |
| return 0; |
| } |
| #endif /* CONFIG_PM */ |
| |
| #define PCI_CLASS_FIREWIRE_OHCI ((PCI_CLASS_SERIAL_FIREWIRE << 8) | 0x10) |
| |
| static struct pci_device_id ohci1394_pci_tbl[] = { |
| { |
| .class = PCI_CLASS_FIREWIRE_OHCI, |
| .class_mask = PCI_ANY_ID, |
| .vendor = PCI_ANY_ID, |
| .device = PCI_ANY_ID, |
| .subvendor = PCI_ANY_ID, |
| .subdevice = PCI_ANY_ID, |
| }, |
| { 0, }, |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, ohci1394_pci_tbl); |
| |
| static struct pci_driver ohci1394_pci_driver = { |
| .name = OHCI1394_DRIVER_NAME, |
| .id_table = ohci1394_pci_tbl, |
| .probe = ohci1394_pci_probe, |
| .remove = ohci1394_pci_remove, |
| #ifdef CONFIG_PM |
| .resume = ohci1394_pci_resume, |
| .suspend = ohci1394_pci_suspend, |
| #endif |
| }; |
| |
| /*********************************** |
| * OHCI1394 Video Interface * |
| ***********************************/ |
| |
| /* essentially the only purpose of this code is to allow another |
| module to hook into ohci's interrupt handler */ |
| |
| int ohci1394_stop_context(struct ti_ohci *ohci, int reg, char *msg) |
| { |
| int i=0; |
| |
| /* stop the channel program if it's still running */ |
| reg_write(ohci, reg, 0x8000); |
| |
| /* Wait until it effectively stops */ |
| while (reg_read(ohci, reg) & 0x400) { |
| i++; |
| if (i>5000) { |
| PRINT(KERN_ERR, |
| "Runaway loop while stopping context: %s...", msg ? msg : ""); |
| return 1; |
| } |
| |
| mb(); |
| udelay(10); |
| } |
| if (msg) PRINT(KERN_ERR, "%s: dma prg stopped", msg); |
| return 0; |
| } |
| |
| void ohci1394_init_iso_tasklet(struct ohci1394_iso_tasklet *tasklet, int type, |
| void (*func)(unsigned long), unsigned long data) |
| { |
| tasklet_init(&tasklet->tasklet, func, data); |
| tasklet->type = type; |
| /* We init the tasklet->link field, so we can list_del() it |
| * without worrying whether it was added to the list or not. */ |
| INIT_LIST_HEAD(&tasklet->link); |
| } |
| |
| int ohci1394_register_iso_tasklet(struct ti_ohci *ohci, |
| struct ohci1394_iso_tasklet *tasklet) |
| { |
| unsigned long flags, *usage; |
| int n, i, r = -EBUSY; |
| |
| if (tasklet->type == OHCI_ISO_TRANSMIT) { |
| n = ohci->nb_iso_xmit_ctx; |
| usage = &ohci->it_ctx_usage; |
| } |
| else { |
| n = ohci->nb_iso_rcv_ctx; |
| usage = &ohci->ir_ctx_usage; |
| |
| /* only one receive context can be multichannel (OHCI sec 10.4.1) */ |
| if (tasklet->type == OHCI_ISO_MULTICHANNEL_RECEIVE) { |
| if (test_and_set_bit(0, &ohci->ir_multichannel_used)) { |
| return r; |
| } |
| } |
| } |
| |
| spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags); |
| |
| for (i = 0; i < n; i++) |
| if (!test_and_set_bit(i, usage)) { |
| tasklet->context = i; |
| list_add_tail(&tasklet->link, &ohci->iso_tasklet_list); |
| r = 0; |
| break; |
| } |
| |
| spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags); |
| |
| return r; |
| } |
| |
| void ohci1394_unregister_iso_tasklet(struct ti_ohci *ohci, |
| struct ohci1394_iso_tasklet *tasklet) |
| { |
| unsigned long flags; |
| |
| tasklet_kill(&tasklet->tasklet); |
| |
| spin_lock_irqsave(&ohci->iso_tasklet_list_lock, flags); |
| |
| if (tasklet->type == OHCI_ISO_TRANSMIT) |
| clear_bit(tasklet->context, &ohci->it_ctx_usage); |
| else { |
| clear_bit(tasklet->context, &ohci->ir_ctx_usage); |
| |
| if (tasklet->type == OHCI_ISO_MULTICHANNEL_RECEIVE) { |
| clear_bit(0, &ohci->ir_multichannel_used); |
| } |
| } |
| |
| list_del(&tasklet->link); |
| |
| spin_unlock_irqrestore(&ohci->iso_tasklet_list_lock, flags); |
| } |
| |
| EXPORT_SYMBOL(ohci1394_stop_context); |
| EXPORT_SYMBOL(ohci1394_init_iso_tasklet); |
| EXPORT_SYMBOL(ohci1394_register_iso_tasklet); |
| EXPORT_SYMBOL(ohci1394_unregister_iso_tasklet); |
| |
| /*********************************** |
| * General module initialization * |
| ***********************************/ |
| |
| MODULE_AUTHOR("Sebastien Rougeaux <sebastien.rougeaux@anu.edu.au>"); |
| MODULE_DESCRIPTION("Driver for PCI OHCI IEEE-1394 controllers"); |
| MODULE_LICENSE("GPL"); |
| |
| static void __exit ohci1394_cleanup (void) |
| { |
| pci_unregister_driver(&ohci1394_pci_driver); |
| } |
| |
| static int __init ohci1394_init(void) |
| { |
| return pci_register_driver(&ohci1394_pci_driver); |
| } |
| |
| /* Register before most other device drivers. |
| * Useful for remote debugging via physical DMA, e.g. using firescope. */ |
| fs_initcall(ohci1394_init); |
| module_exit(ohci1394_cleanup); |