| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 1994, 1995, 1996, 1999, 2000 by Ralf Baechle |
| * Copyright (C) 1999, 2000 by Silicon Graphics |
| * Copyright (C) 2002 Maciej W. Rozycki |
| */ |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/signal.h> /* for SIGBUS */ |
| #include <linux/sched.h> /* schow_regs(), force_sig() */ |
| |
| #include <asm/module.h> |
| #include <asm/sn/addrs.h> |
| #include <asm/sn/arch.h> |
| #include <asm/sn/sn0/hub.h> |
| #include <asm/tlbdebug.h> |
| #include <asm/traps.h> |
| #include <asm/uaccess.h> |
| |
| extern void dump_tlb_addr(unsigned long addr); |
| extern void dump_tlb_all(void); |
| |
| static void dump_hub_information(unsigned long errst0, unsigned long errst1) |
| { |
| static char *err_type[2][8] = { |
| { NULL, "Uncached Partial Read PRERR", "DERR", "Read Timeout", |
| NULL, NULL, NULL, NULL }, |
| { "WERR", "Uncached Partial Write", "PWERR", "Write Timeout", |
| NULL, NULL, NULL, NULL } |
| }; |
| int wrb = errst1 & PI_ERR_ST1_WRBRRB_MASK; |
| |
| if (!(errst0 & PI_ERR_ST0_VALID_MASK)) { |
| printk("Hub does not contain valid error information\n"); |
| return; |
| } |
| |
| |
| printk("Hub has valid error information:\n"); |
| if (errst0 & PI_ERR_ST0_OVERRUN_MASK) |
| printk("Overrun is set. Error stack may contain additional " |
| "information.\n"); |
| printk("Hub error address is %08lx\n", |
| (errst0 & PI_ERR_ST0_ADDR_MASK) >> (PI_ERR_ST0_ADDR_SHFT - 3)); |
| printk("Incoming message command 0x%lx\n", |
| (errst0 & PI_ERR_ST0_CMD_MASK) >> PI_ERR_ST0_CMD_SHFT); |
| printk("Supplemental field of incoming message is 0x%lx\n", |
| (errst0 & PI_ERR_ST0_SUPPL_MASK) >> PI_ERR_ST0_SUPPL_SHFT); |
| printk("T5 Rn (for RRB only) is 0x%lx\n", |
| (errst0 & PI_ERR_ST0_REQNUM_MASK) >> PI_ERR_ST0_REQNUM_SHFT); |
| printk("Error type is %s\n", err_type[wrb] |
| [(errst0 & PI_ERR_ST0_TYPE_MASK) >> PI_ERR_ST0_TYPE_SHFT] |
| ? : "invalid"); |
| } |
| |
| int ip27_be_handler(struct pt_regs *regs, int is_fixup) |
| { |
| unsigned long errst0, errst1; |
| int data = regs->cp0_cause & 4; |
| int cpu = LOCAL_HUB_L(PI_CPU_NUM); |
| |
| if (is_fixup) |
| return MIPS_BE_FIXUP; |
| |
| printk("Slice %c got %cbe at 0x%lx\n", 'A' + cpu, data ? 'd' : 'i', |
| regs->cp0_epc); |
| printk("Hub information:\n"); |
| printk("ERR_INT_PEND = 0x%06lx\n", LOCAL_HUB_L(PI_ERR_INT_PEND)); |
| errst0 = LOCAL_HUB_L(cpu ? PI_ERR_STATUS0_B : PI_ERR_STATUS0_A); |
| errst1 = LOCAL_HUB_L(cpu ? PI_ERR_STATUS1_B : PI_ERR_STATUS1_A); |
| dump_hub_information(errst0, errst1); |
| show_regs(regs); |
| dump_tlb_all(); |
| while(1); |
| force_sig(SIGBUS, current); |
| } |
| |
| void __init ip27_be_init(void) |
| { |
| /* XXX Initialize all the Hub & Bridge error handling here. */ |
| int cpu = LOCAL_HUB_L(PI_CPU_NUM); |
| int cpuoff = cpu << 8; |
| |
| board_be_handler = ip27_be_handler; |
| |
| LOCAL_HUB_S(PI_ERR_INT_PEND, |
| cpu ? PI_ERR_CLEAR_ALL_B : PI_ERR_CLEAR_ALL_A); |
| LOCAL_HUB_S(PI_ERR_INT_MASK_A + cpuoff, 0); |
| LOCAL_HUB_S(PI_ERR_STACK_ADDR_A + cpuoff, 0); |
| LOCAL_HUB_S(PI_ERR_STACK_SIZE, 0); /* Disable error stack */ |
| LOCAL_HUB_S(PI_SYSAD_ERRCHK_EN, PI_SYSAD_CHECK_ALL); |
| } |