| /* |
| * MPC8349E MDS Device Tree Source |
| * |
| * Copyright 2005, 2006 Freescale Semiconductor Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| */ |
| |
| / { |
| model = "MPC8349EMDS"; |
| compatible = "MPC834xMDS"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| cpus { |
| #cpus = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| PowerPC,8349@0 { |
| device_type = "cpu"; |
| reg = <0>; |
| d-cache-line-size = <20>; // 32 bytes |
| i-cache-line-size = <20>; // 32 bytes |
| d-cache-size = <8000>; // L1, 32K |
| i-cache-size = <8000>; // L1, 32K |
| timebase-frequency = <0>; // from bootloader |
| bus-frequency = <0>; // from bootloader |
| clock-frequency = <0>; // from bootloader |
| 32-bit; |
| }; |
| }; |
| |
| memory { |
| device_type = "memory"; |
| reg = <00000000 10000000>; // 256MB at 0 |
| }; |
| |
| soc8349@e0000000 { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| #interrupt-cells = <2>; |
| device_type = "soc"; |
| ranges = <0 e0000000 00100000>; |
| reg = <e0000000 00000200>; |
| bus-frequency = <0>; |
| |
| wdt@200 { |
| device_type = "watchdog"; |
| compatible = "mpc83xx_wdt"; |
| reg = <200 100>; |
| }; |
| |
| i2c@3000 { |
| device_type = "i2c"; |
| compatible = "fsl-i2c"; |
| reg = <3000 100>; |
| interrupts = <e 8>; |
| interrupt-parent = <700>; |
| dfsrr; |
| }; |
| |
| i2c@3100 { |
| device_type = "i2c"; |
| compatible = "fsl-i2c"; |
| reg = <3100 100>; |
| interrupts = <f 8>; |
| interrupt-parent = <700>; |
| dfsrr; |
| }; |
| |
| spi@7000 { |
| device_type = "spi"; |
| compatible = "mpc83xx_spi"; |
| reg = <7000 1000>; |
| interrupts = <10 8>; |
| interrupt-parent = <700>; |
| mode = <0>; |
| }; |
| |
| /* phy type (ULPI or SERIAL) are only types supportted for MPH */ |
| /* port = 0 or 1 */ |
| usb@22000 { |
| device_type = "usb"; |
| compatible = "fsl-usb2-mph"; |
| reg = <22000 1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <700>; |
| interrupts = <27 2>; |
| phy_type = "ulpi"; |
| port1; |
| }; |
| /* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */ |
| usb@23000 { |
| device_type = "usb"; |
| compatible = "fsl-usb2-dr"; |
| reg = <23000 1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupt-parent = <700>; |
| interrupts = <26 2>; |
| phy_type = "ulpi"; |
| }; |
| |
| mdio@24520 { |
| device_type = "mdio"; |
| compatible = "gianfar"; |
| reg = <24520 20>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| linux,phandle = <24520>; |
| ethernet-phy@0 { |
| linux,phandle = <2452000>; |
| interrupt-parent = <700>; |
| interrupts = <11 2>; |
| reg = <0>; |
| device_type = "ethernet-phy"; |
| }; |
| ethernet-phy@1 { |
| linux,phandle = <2452001>; |
| interrupt-parent = <700>; |
| interrupts = <12 2>; |
| reg = <1>; |
| device_type = "ethernet-phy"; |
| }; |
| }; |
| |
| ethernet@24000 { |
| device_type = "network"; |
| model = "TSEC"; |
| compatible = "gianfar"; |
| reg = <24000 1000>; |
| address = [ 00 00 00 00 00 00 ]; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <20 8 21 8 22 8>; |
| interrupt-parent = <700>; |
| phy-handle = <2452000>; |
| }; |
| |
| ethernet@25000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| device_type = "network"; |
| model = "TSEC"; |
| compatible = "gianfar"; |
| reg = <25000 1000>; |
| address = [ 00 00 00 00 00 00 ]; |
| local-mac-address = [ 00 00 00 00 00 00 ]; |
| interrupts = <23 8 24 8 25 8>; |
| interrupt-parent = <700>; |
| phy-handle = <2452001>; |
| }; |
| |
| serial@4500 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <4500 100>; |
| clock-frequency = <0>; |
| interrupts = <9 8>; |
| interrupt-parent = <700>; |
| }; |
| |
| serial@4600 { |
| device_type = "serial"; |
| compatible = "ns16550"; |
| reg = <4600 100>; |
| clock-frequency = <0>; |
| interrupts = <a 8>; |
| interrupt-parent = <700>; |
| }; |
| |
| pci@8500 { |
| interrupt-map-mask = <f800 0 0 7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x11 */ |
| 8800 0 0 1 700 14 8 |
| 8800 0 0 2 700 15 8 |
| 8800 0 0 3 700 16 8 |
| 8800 0 0 4 700 17 8 |
| |
| /* IDSEL 0x12 */ |
| 9000 0 0 1 700 16 8 |
| 9000 0 0 2 700 17 8 |
| 9000 0 0 3 700 14 8 |
| 9000 0 0 4 700 15 8 |
| |
| /* IDSEL 0x13 */ |
| 9800 0 0 1 700 17 8 |
| 9800 0 0 2 700 14 8 |
| 9800 0 0 3 700 15 8 |
| 9800 0 0 4 700 16 8 |
| |
| /* IDSEL 0x15 */ |
| a800 0 0 1 700 14 8 |
| a800 0 0 2 700 15 8 |
| a800 0 0 3 700 16 8 |
| a800 0 0 4 700 17 8 |
| |
| /* IDSEL 0x16 */ |
| b000 0 0 1 700 17 8 |
| b000 0 0 2 700 14 8 |
| b000 0 0 3 700 15 8 |
| b000 0 0 4 700 16 8 |
| |
| /* IDSEL 0x17 */ |
| b800 0 0 1 700 16 8 |
| b800 0 0 2 700 17 8 |
| b800 0 0 3 700 14 8 |
| b800 0 0 4 700 15 8 |
| |
| /* IDSEL 0x18 */ |
| c000 0 0 1 700 15 8 |
| c000 0 0 2 700 16 8 |
| c000 0 0 3 700 17 8 |
| c000 0 0 4 700 14 8>; |
| interrupt-parent = <700>; |
| interrupts = <42 8>; |
| bus-range = <0 0>; |
| ranges = <02000000 0 a0000000 a0000000 0 10000000 |
| 42000000 0 80000000 80000000 0 10000000 |
| 01000000 0 00000000 e2000000 0 00100000>; |
| clock-frequency = <3f940aa>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <8500 100>; |
| compatible = "83xx"; |
| device_type = "pci"; |
| }; |
| |
| pci@8600 { |
| interrupt-map-mask = <f800 0 0 7>; |
| interrupt-map = < |
| |
| /* IDSEL 0x11 */ |
| 8800 0 0 1 700 14 8 |
| 8800 0 0 2 700 15 8 |
| 8800 0 0 3 700 16 8 |
| 8800 0 0 4 700 17 8 |
| |
| /* IDSEL 0x12 */ |
| 9000 0 0 1 700 16 8 |
| 9000 0 0 2 700 17 8 |
| 9000 0 0 3 700 14 8 |
| 9000 0 0 4 700 15 8 |
| |
| /* IDSEL 0x13 */ |
| 9800 0 0 1 700 17 8 |
| 9800 0 0 2 700 14 8 |
| 9800 0 0 3 700 15 8 |
| 9800 0 0 4 700 16 8 |
| |
| /* IDSEL 0x15 */ |
| a800 0 0 1 700 14 8 |
| a800 0 0 2 700 15 8 |
| a800 0 0 3 700 16 8 |
| a800 0 0 4 700 17 8 |
| |
| /* IDSEL 0x16 */ |
| b000 0 0 1 700 17 8 |
| b000 0 0 2 700 14 8 |
| b000 0 0 3 700 15 8 |
| b000 0 0 4 700 16 8 |
| |
| /* IDSEL 0x17 */ |
| b800 0 0 1 700 16 8 |
| b800 0 0 2 700 17 8 |
| b800 0 0 3 700 14 8 |
| b800 0 0 4 700 15 8 |
| |
| /* IDSEL 0x18 */ |
| c000 0 0 1 700 15 8 |
| c000 0 0 2 700 16 8 |
| c000 0 0 3 700 17 8 |
| c000 0 0 4 700 14 8>; |
| interrupt-parent = <700>; |
| interrupts = <42 8>; |
| bus-range = <0 0>; |
| ranges = <02000000 0 b0000000 b0000000 0 10000000 |
| 42000000 0 90000000 90000000 0 10000000 |
| 01000000 0 00000000 e2100000 0 00100000>; |
| clock-frequency = <3f940aa>; |
| #interrupt-cells = <1>; |
| #size-cells = <2>; |
| #address-cells = <3>; |
| reg = <8600 100>; |
| compatible = "83xx"; |
| device_type = "pci"; |
| }; |
| |
| /* May need to remove if on a part without crypto engine */ |
| crypto@30000 { |
| device_type = "crypto"; |
| model = "SEC2"; |
| compatible = "talitos"; |
| reg = <30000 10000>; |
| interrupts = <b 8>; |
| interrupt-parent = <700>; |
| num-channels = <4>; |
| channel-fifo-len = <18>; |
| exec-units-mask = <0000007e>; |
| /* desc mask is for rev2.0, |
| * we need runtime fixup for >2.0 */ |
| descriptor-types-mask = <01010ebf>; |
| }; |
| |
| /* IPIC |
| * interrupts cell = <intr #, sense> |
| * sense values match linux IORESOURCE_IRQ_* defines: |
| * sense == 8: Level, low assertion |
| * sense == 2: Edge, high-to-low change |
| */ |
| pic@700 { |
| linux,phandle = <700>; |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <700 100>; |
| built-in; |
| device_type = "ipic"; |
| }; |
| }; |
| }; |
