blob: d3ff280510ffea144fd664e3e1e2b5c4492cf53e [file] [log] [blame]
/*
* WindRiver PowerQUICC III SBC85xx board common routines
*
* Copyright 2002, 2003 Motorola Inc.
* Copyright 2004 Red Hat, Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/config.h>
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/serial.h>
#include <linux/module.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/page.h>
#include <asm/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/open_pic.h>
#include <asm/bootinfo.h>
#include <asm/pci-bridge.h>
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <asm/immap_85xx.h>
#include <asm/ppc_sys.h>
#include <mm/mmu_decl.h>
#include <platforms/85xx/sbc85xx.h>
unsigned char __res[sizeof (bd_t)];
#ifndef CONFIG_PCI
unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
unsigned long pci_dram_offset = 0;
#endif
extern unsigned long total_memory; /* in mm/init */
/* Internal interrupts are all Level Sensitive, and Positive Polarity */
static u_char sbc8560_openpic_initsenses[] __initdata = {
MPC85XX_INTERNAL_IRQ_SENSES,
0x0, /* External 0: */
0x0, /* External 1: */
#if defined(CONFIG_PCI)
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 2: PCI slot 0 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 3: PCI slot 1 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 4: PCI slot 2 */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PCI slot 3 */
#else
0x0, /* External 2: */
0x0, /* External 3: */
0x0, /* External 4: */
0x0, /* External 5: */
#endif
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 6: PHY */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
0x0, /* External 8: */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 9: PHY */
(IRQ_SENSE_LEVEL | IRQ_POLARITY_POSITIVE), /* External 10: PHY */
0x0, /* External 11: */
};
/* ************************************************************************ */
int
sbc8560_show_cpuinfo(struct seq_file *m)
{
uint pvid, svid, phid1;
uint memsize = total_memory;
bd_t *binfo = (bd_t *) __res;
unsigned int freq;
/* get the core frequency */
freq = binfo->bi_intfreq;
pvid = mfspr(SPRN_PVR);
svid = mfspr(SPRN_SVR);
seq_printf(m, "Vendor\t\t: Wind River\n");
seq_printf(m, "Machine\t\t: SBC%s\n", cur_ppc_sys_spec->ppc_sys_name);
seq_printf(m, "clock\t\t: %dMHz\n", freq / 1000000);
seq_printf(m, "PVR\t\t: 0x%x\n", pvid);
seq_printf(m, "SVR\t\t: 0x%x\n", svid);
/* Display cpu Pll setting */
phid1 = mfspr(SPRN_HID1);
seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f));
/* Display the amount of memory */
seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
return 0;
}
void __init
sbc8560_init_IRQ(void)
{
bd_t *binfo = (bd_t *) __res;
/* Determine the Physical Address of the OpenPIC regs */
phys_addr_t OpenPIC_PAddr =
binfo->bi_immr_base + MPC85xx_OPENPIC_OFFSET;
OpenPIC_Addr = ioremap(OpenPIC_PAddr, MPC85xx_OPENPIC_SIZE);
OpenPIC_InitSenses = sbc8560_openpic_initsenses;
OpenPIC_NumInitSenses = sizeof (sbc8560_openpic_initsenses);
/* Skip reserved space and internal sources */
openpic_set_sources(0, 32, OpenPIC_Addr + 0x10200);
/* Map PIC IRQs 0-11 */
openpic_set_sources(48, 12, OpenPIC_Addr + 0x10000);
/* we let openpic interrupts starting from an offset, to
* leave space for cascading interrupts underneath.
*/
openpic_init(MPC85xx_OPENPIC_IRQ_OFFSET);
return;
}
/*
* interrupt routing
*/
#ifdef CONFIG_PCI
int mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel,
unsigned char pin)
{
static char pci_irq_table[][4] =
/*
* PCI IDSEL/INTPIN->INTLINE
* A B C D
*/
{
{PIRQA, PIRQB, PIRQC, PIRQD},
{PIRQD, PIRQA, PIRQB, PIRQC},
{PIRQC, PIRQD, PIRQA, PIRQB},
{PIRQB, PIRQC, PIRQD, PIRQA},
};
const long min_idsel = 12, max_idsel = 15, irqs_per_slot = 4;
return PCI_IRQ_TABLE_LOOKUP;
}
int mpc85xx_exclude_device(u_char bus, u_char devfn)
{
if (bus == 0 && PCI_SLOT(devfn) == 0)
return PCIBIOS_DEVICE_NOT_FOUND;
else
return PCIBIOS_SUCCESSFUL;
}
#endif /* CONFIG_PCI */