arch/mips/kernel/cpu-bugs64.c - maze/linux - Git at Google

 /*
  * Copyright (C) 2003, 2004  Maciej W. Rozycki
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
  * as published by the Free Software Foundation; either version
  * 2 of the License, or (at your option) any later version.
  */
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/ptrace.h>
 #include <linux/stddef.h>

 #include <asm/bugs.h>
 #include <asm/compiler.h>
 #include <asm/cpu.h>
 #include <asm/fpu.h>
 #include <asm/mipsregs.h>
 #include <asm/system.h>

 static inline void align_mod(const int align, const int mod)
 {
 	asm volatile(
 		".set	push\n\t"
 		".set	noreorder\n\t"
 		".balign %0\n\t"
 		".rept	%1\n\t"
 		"nop\n\t"
 		".endr\n\t"
 		".set	pop"
 		:
 		: "n" (align), "n" (mod));
 }

 static inline void mult_sh_align_mod(long *v1, long *v2, long *w,
 				     const int align, const int mod)
 {
 	unsigned long flags;
 	int m1, m2;
 	long p, s, lv1, lv2, lw;

 	/*
 	 * We want the multiply and the shift to be isolated from the
 	 * rest of the code to disable gcc optimizations.  Hence the
 	 * asm statements that execute nothing, but make gcc not know
 	 * what the values of m1, m2 and s are and what lv2 and p are
 	 * used for.
 	 */

 	local_irq_save(flags);
 	/*
 	 * The following code leads to a wrong result of the first
 	 * dsll32 when executed on R4000 rev. 2.2 or 3.0 (PRId
 	 * 00000422 or 00000430, respectively).
 	 *
 	 * See "MIPS R4000PC/SC Errata, Processor Revision 2.2 and
 	 * 3.0" by MIPS Technologies, Inc., errata #16 and #28 for
 	 * details.  I got no permission to duplicate them here,
 	 * sigh... --macro
 	 */
 	asm volatile(
 		""
 		: "=r" (m1), "=r" (m2), "=r" (s)
 		: "0" (5), "1" (8), "2" (5));
 	align_mod(align, mod);
 	/*
 	 * The trailing nop is needed to fullfill the two-instruction
 	 * requirement between reading hi/lo and staring a mult/div.
 	 * Leaving it out may cause gas insert a nop itself breaking
 	 * the desired alignment of the next chunk.
 	 */
 	asm volatile(
 		".set	push\n\t"
 		".set	noat\n\t"
 		".set	noreorder\n\t"
 		".set	nomacro\n\t"
 		"mult	%2, %3\n\t"
 		"dsll32	%0, %4, %5\n\t"
 		"mflo	$0\n\t"
 		"dsll32	%1, %4, %5\n\t"
 		"nop\n\t"
 		".set	pop"
 		: "=&r" (lv1), "=r" (lw)
 		: "r" (m1), "r" (m2), "r" (s), "I" (0)
 		: "hi", "lo", GCC_REG_ACCUM);
 	/* We have to use single integers for m1 and m2 and a double
 	 * one for p to be sure the mulsidi3 gcc's RTL multiplication
 	 * instruction has the workaround applied.  Older versions of
 	 * gcc have correct umulsi3 and mulsi3, but other
 	 * multiplication variants lack the workaround.
 	 */
 	asm volatile(
 		""
 		: "=r" (m1), "=r" (m2), "=r" (s)
 		: "0" (m1), "1" (m2), "2" (s));
 	align_mod(align, mod);
 	p = m1 * m2;
 	lv2 = s << 32;
 	asm volatile(
 		""
 		: "=r" (lv2)
 		: "0" (lv2), "r" (p));
 	local_irq_restore(flags);

 	*v1 = lv1;
 	*v2 = lv2;
 	*w = lw;
 }

 static inline void check_mult_sh(void)
 {
 	long v1[8], v2[8], w[8];
 	int bug, fix, i;

 	printk("Checking for the multiply/shift bug... ");

 	/*
 	 * Testing discovered false negatives for certain code offsets
 	 * into cache lines.  Hence we test all possible offsets for
 	 * the worst assumption of an R4000 I-cache line width of 32
 	 * bytes.
 	 *
 	 * We can't use a loop as alignment directives need to be
 	 * immediates.
 	 */
 	mult_sh_align_mod(&v1[0], &v2[0], &w[0], 32, 0);
 	mult_sh_align_mod(&v1[1], &v2[1], &w[1], 32, 1);
 	mult_sh_align_mod(&v1[2], &v2[2], &w[2], 32, 2);
 	mult_sh_align_mod(&v1[3], &v2[3], &w[3], 32, 3);
 	mult_sh_align_mod(&v1[4], &v2[4], &w[4], 32, 4);
 	mult_sh_align_mod(&v1[5], &v2[5], &w[5], 32, 5);
 	mult_sh_align_mod(&v1[6], &v2[6], &w[6], 32, 6);
 	mult_sh_align_mod(&v1[7], &v2[7], &w[7], 32, 7);

 	bug = 0;
 	for (i = 0; i < 8; i++)
 		if (v1[i] != w[i])
 			bug = 1;

 	if (bug == 0) {
 		printk("no.\n");
 		return;
 	}

 	printk("yes, workaround... ");

 	fix = 1;
 	for (i = 0; i < 8; i++)
 		if (v2[i] != w[i])
 			fix = 0;

 	if (fix == 1) {
 		printk("yes.\n");
 		return;
 	}

 	printk("no.\n");
 	panic("Reliable operation impossible!\n"
 #ifndef CONFIG_CPU_R4000
 	      "Configure for R4000 to enable the workaround."
 #else
 	      "Please report to <linux-mips@linux-mips.org>."
 #endif
 	      );
 }

 static volatile int daddi_ov __initdata = 0;

 asmlinkage void __init do_daddi_ov(struct pt_regs *regs)
 {
 	daddi_ov = 1;
 	regs->cp0_epc += 4;
 }

 static inline void check_daddi(void)
 {
 	extern asmlinkage void handle_daddi_ov(void);
 	unsigned long flags;
 	void *handler;
 	long v, tmp;

 	printk("Checking for the daddi bug... ");

 	local_irq_save(flags);
 	handler = set_except_vector(12, handle_daddi_ov);
 	/*
 	 * The following code fails to trigger an overflow exception
 	 * when executed on R4000 rev. 2.2 or 3.0 (PRId 00000422 or
 	 * 00000430, respectively).
 	 *
 	 * See "MIPS R4000PC/SC Errata, Processor Revision 2.2 and
 	 * 3.0" by MIPS Technologies, Inc., erratum #23 for details.
 	 * I got no permission to duplicate it here, sigh... --macro
 	 */
 	asm volatile(
 		".set	push\n\t"
 		".set	noat\n\t"
 		".set	noreorder\n\t"
 		".set	nomacro\n\t"
 		"addiu	%1, $0, %2\n\t"
 		"dsrl	%1, %1, 1\n\t"
 #ifdef HAVE_AS_SET_DADDI
 		".set	daddi\n\t"
 #endif
 		"daddi	%0, %1, %3\n\t"
 		".set	pop"
 		: "=r" (v), "=&r" (tmp)
 		: "I" (0xffffffffffffdb9a), "I" (0x1234));
 	set_except_vector(12, handler);
 	local_irq_restore(flags);

 	if (daddi_ov) {
 		printk("no.\n");
 		return;
 	}

 	printk("yes, workaround... ");

 	local_irq_save(flags);
 	handler = set_except_vector(12, handle_daddi_ov);
 	asm volatile(
 		"addiu	%1, $0, %2\n\t"
 		"dsrl	%1, %1, 1\n\t"
 		"daddi	%0, %1, %3"
 		: "=r" (v), "=&r" (tmp)
 		: "I" (0xffffffffffffdb9a), "I" (0x1234));
 	set_except_vector(12, handler);
 	local_irq_restore(flags);

 	if (daddi_ov) {
 		printk("yes.\n");
 		return;
 	}

 	printk("no.\n");
 	panic("Reliable operation impossible!\n"
 #if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
 	      "Configure for R4000 or R4400 to enable the workaround."
 #else
 	      "Please report to <linux-mips@linux-mips.org>."
 #endif
 	      );
 }

 static inline void check_daddiu(void)
 {
 	long v, w, tmp;

 	printk("Checking for the daddiu bug... ");

 	/*
 	 * The following code leads to a wrong result of daddiu when
 	 * executed on R4400 rev. 1.0 (PRId 00000440).
 	 *
 	 * See "MIPS R4400PC/SC Errata, Processor Revision 1.0" by
 	 * MIPS Technologies, Inc., erratum #7 for details.
 	 *
 	 * According to "MIPS R4000PC/SC Errata, Processor Revision
 	 * 2.2 and 3.0" by MIPS Technologies, Inc., erratum #41 this
 	 * problem affects R4000 rev. 2.2 and 3.0 (PRId 00000422 and
 	 * 00000430, respectively), too.  Testing failed to trigger it
 	 * so far.
 	 *
 	 * I got no permission to duplicate the errata here, sigh...
 	 * --macro
 	 */
 	asm volatile(
 		".set	push\n\t"
 		".set	noat\n\t"
 		".set	noreorder\n\t"
 		".set	nomacro\n\t"
 		"addiu	%2, $0, %3\n\t"
 		"dsrl	%2, %2, 1\n\t"
 #ifdef HAVE_AS_SET_DADDI
 		".set	daddi\n\t"
 #endif
 		"daddiu	%0, %2, %4\n\t"
 		"addiu	%1, $0, %4\n\t"
 		"daddu	%1, %2\n\t"
 		".set	pop"
 		: "=&r" (v), "=&r" (w), "=&r" (tmp)
 		: "I" (0xffffffffffffdb9a), "I" (0x1234));

 	if (v == w) {
 		printk("no.\n");
 		return;
 	}

 	printk("yes, workaround... ");

 	asm volatile(
 		"addiu	%2, $0, %3\n\t"
 		"dsrl	%2, %2, 1\n\t"
 		"daddiu	%0, %2, %4\n\t"
 		"addiu	%1, $0, %4\n\t"
 		"daddu	%1, %2"
 		: "=&r" (v), "=&r" (w), "=&r" (tmp)
 		: "I" (0xffffffffffffdb9a), "I" (0x1234));

 	if (v == w) {
 		printk("yes.\n");
 		return;
 	}

 	printk("no.\n");
 	panic("Reliable operation impossible!\n"
 #if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
 	      "Configure for R4000 or R4400 to enable the workaround."
 #else
 	      "Please report to <linux-mips@linux-mips.org>."
 #endif
 	      );
 }

 void __init check_bugs64(void)
 {
 	check_mult_sh();
 	check_daddi();
 	check_daddiu();
 }
	/*
	* Copyright (C) 2003, 2004 Maciej W. Rozycki
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License
	* as published by the Free Software Foundation; either version
	* 2 of the License, or (at your option) any later version.
	*/
	#include <linux/config.h>
	#include <linux/init.h>
	#include <linux/kernel.h>
	#include <linux/ptrace.h>
	#include <linux/stddef.h>

	#include <asm/bugs.h>
	#include <asm/compiler.h>
	#include <asm/cpu.h>
	#include <asm/fpu.h>
	#include <asm/mipsregs.h>
	#include <asm/system.h>

	static inline void align_mod(const int align, const int mod)
	{
	asm volatile(
	".set push\n\t"
	".set noreorder\n\t"
	".balign %0\n\t"
	".rept %1\n\t"
	"nop\n\t"
	".endr\n\t"
	".set pop"
	:
	: "n" (align), "n" (mod));
	}

	static inline void mult_sh_align_mod(long v1, long v2, long *w,
	const int align, const int mod)
	{
	unsigned long flags;
	int m1, m2;
	long p, s, lv1, lv2, lw;

	/*
	* We want the multiply and the shift to be isolated from the
	* rest of the code to disable gcc optimizations. Hence the
	* asm statements that execute nothing, but make gcc not know
	* what the values of m1, m2 and s are and what lv2 and p are
	* used for.
	*/

	local_irq_save(flags);
	/*
	* The following code leads to a wrong result of the first
	* dsll32 when executed on R4000 rev. 2.2 or 3.0 (PRId
	* 00000422 or 00000430, respectively).
	*
	* See "MIPS R4000PC/SC Errata, Processor Revision 2.2 and
	* 3.0" by MIPS Technologies, Inc., errata #16 and #28 for
	* details. I got no permission to duplicate them here,
	* sigh... --macro
	*/
	asm volatile(
	""
	: "=r" (m1), "=r" (m2), "=r" (s)
	: "0" (5), "1" (8), "2" (5));
	align_mod(align, mod);
	/*
	* The trailing nop is needed to fullfill the two-instruction
	* requirement between reading hi/lo and staring a mult/div.
	* Leaving it out may cause gas insert a nop itself breaking
	* the desired alignment of the next chunk.
	*/
	asm volatile(
	".set push\n\t"
	".set noat\n\t"
	".set noreorder\n\t"
	".set nomacro\n\t"
	"mult %2, %3\n\t"
	"dsll32 %0, %4, %5\n\t"
	"mflo $0\n\t"
	"dsll32 %1, %4, %5\n\t"
	"nop\n\t"
	".set pop"
	: "=&r" (lv1), "=r" (lw)
	: "r" (m1), "r" (m2), "r" (s), "I" (0)
	: "hi", "lo", GCC_REG_ACCUM);
	/* We have to use single integers for m1 and m2 and a double
	* one for p to be sure the mulsidi3 gcc's RTL multiplication
	* instruction has the workaround applied. Older versions of
	* gcc have correct umulsi3 and mulsi3, but other
	* multiplication variants lack the workaround.
	*/
	asm volatile(
	""
	: "=r" (m1), "=r" (m2), "=r" (s)
	: "0" (m1), "1" (m2), "2" (s));
	align_mod(align, mod);
	p = m1 * m2;
	lv2 = s << 32;
	asm volatile(
	""
	: "=r" (lv2)
	: "0" (lv2), "r" (p));
	local_irq_restore(flags);

	*v1 = lv1;
	*v2 = lv2;
	*w = lw;
	}

	static inline void check_mult_sh(void)
	{
	long v1[8], v2[8], w[8];
	int bug, fix, i;

	printk("Checking for the multiply/shift bug... ");

	/*
	* Testing discovered false negatives for certain code offsets
	* into cache lines. Hence we test all possible offsets for
	* the worst assumption of an R4000 I-cache line width of 32
	* bytes.
	*
	* We can't use a loop as alignment directives need to be
	* immediates.
	*/
	mult_sh_align_mod(&v1[0], &v2[0], &w[0], 32, 0);
	mult_sh_align_mod(&v1[1], &v2[1], &w[1], 32, 1);
	mult_sh_align_mod(&v1[2], &v2[2], &w[2], 32, 2);
	mult_sh_align_mod(&v1[3], &v2[3], &w[3], 32, 3);
	mult_sh_align_mod(&v1[4], &v2[4], &w[4], 32, 4);
	mult_sh_align_mod(&v1[5], &v2[5], &w[5], 32, 5);
	mult_sh_align_mod(&v1[6], &v2[6], &w[6], 32, 6);
	mult_sh_align_mod(&v1[7], &v2[7], &w[7], 32, 7);

	bug = 0;
	for (i = 0; i < 8; i++)
	if (v1[i] != w[i])
	bug = 1;

	if (bug == 0) {
	printk("no.\n");
	return;
	}

	printk("yes, workaround... ");

	fix = 1;
	for (i = 0; i < 8; i++)
	if (v2[i] != w[i])
	fix = 0;

	if (fix == 1) {
	printk("yes.\n");
	return;
	}

	printk("no.\n");
	panic("Reliable operation impossible!\n"
	#ifndef CONFIG_CPU_R4000
	"Configure for R4000 to enable the workaround."
	#else
	"Please report to <linux-mips@linux-mips.org>."
	#endif
	);
	}

	static volatile int daddi_ov __initdata = 0;

	asmlinkage void __init do_daddi_ov(struct pt_regs *regs)
	{
	daddi_ov = 1;
	regs->cp0_epc += 4;
	}

	static inline void check_daddi(void)
	{
	extern asmlinkage void handle_daddi_ov(void);
	unsigned long flags;
	void *handler;
	long v, tmp;

	printk("Checking for the daddi bug... ");

	local_irq_save(flags);
	handler = set_except_vector(12, handle_daddi_ov);
	/*
	* The following code fails to trigger an overflow exception
	* when executed on R4000 rev. 2.2 or 3.0 (PRId 00000422 or
	* 00000430, respectively).
	*
	* See "MIPS R4000PC/SC Errata, Processor Revision 2.2 and
	* 3.0" by MIPS Technologies, Inc., erratum #23 for details.
	* I got no permission to duplicate it here, sigh... --macro
	*/
	asm volatile(
	".set push\n\t"
	".set noat\n\t"
	".set noreorder\n\t"
	".set nomacro\n\t"
	"addiu %1, $0, %2\n\t"
	"dsrl %1, %1, 1\n\t"
	#ifdef HAVE_AS_SET_DADDI
	".set daddi\n\t"
	#endif
	"daddi %0, %1, %3\n\t"
	".set pop"
	: "=r" (v), "=&r" (tmp)
	: "I" (0xffffffffffffdb9a), "I" (0x1234));
	set_except_vector(12, handler);
	local_irq_restore(flags);

	if (daddi_ov) {
	printk("no.\n");
	return;
	}

	printk("yes, workaround... ");

	local_irq_save(flags);
	handler = set_except_vector(12, handle_daddi_ov);
	asm volatile(
	"addiu %1, $0, %2\n\t"
	"dsrl %1, %1, 1\n\t"
	"daddi %0, %1, %3"
	: "=r" (v), "=&r" (tmp)
	: "I" (0xffffffffffffdb9a), "I" (0x1234));
	set_except_vector(12, handler);
	local_irq_restore(flags);

	if (daddi_ov) {
	printk("yes.\n");
	return;
	}

	printk("no.\n");
	panic("Reliable operation impossible!\n"
	#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
	"Configure for R4000 or R4400 to enable the workaround."
	#else
	"Please report to <linux-mips@linux-mips.org>."
	#endif
	);
	}

	static inline void check_daddiu(void)
	{
	long v, w, tmp;

	printk("Checking for the daddiu bug... ");

	/*
	* The following code leads to a wrong result of daddiu when
	* executed on R4400 rev. 1.0 (PRId 00000440).
	*
	* See "MIPS R4400PC/SC Errata, Processor Revision 1.0" by
	* MIPS Technologies, Inc., erratum #7 for details.
	*
	* According to "MIPS R4000PC/SC Errata, Processor Revision
	* 2.2 and 3.0" by MIPS Technologies, Inc., erratum #41 this
	* problem affects R4000 rev. 2.2 and 3.0 (PRId 00000422 and
	* 00000430, respectively), too. Testing failed to trigger it
	* so far.
	*
	* I got no permission to duplicate the errata here, sigh...
	* --macro
	*/
	asm volatile(
	".set push\n\t"
	".set noat\n\t"
	".set noreorder\n\t"
	".set nomacro\n\t"
	"addiu %2, $0, %3\n\t"
	"dsrl %2, %2, 1\n\t"
	#ifdef HAVE_AS_SET_DADDI
	".set daddi\n\t"
	#endif
	"daddiu %0, %2, %4\n\t"
	"addiu %1, $0, %4\n\t"
	"daddu %1, %2\n\t"
	".set pop"
	: "=&r" (v), "=&r" (w), "=&r" (tmp)
	: "I" (0xffffffffffffdb9a), "I" (0x1234));

	if (v == w) {
	printk("no.\n");
	return;
	}

	printk("yes, workaround... ");

	asm volatile(
	"addiu %2, $0, %3\n\t"
	"dsrl %2, %2, 1\n\t"
	"daddiu %0, %2, %4\n\t"
	"addiu %1, $0, %4\n\t"
	"daddu %1, %2"
	: "=&r" (v), "=&r" (w), "=&r" (tmp)
	: "I" (0xffffffffffffdb9a), "I" (0x1234));

	if (v == w) {
	printk("yes.\n");
	return;
	}

	printk("no.\n");
	panic("Reliable operation impossible!\n"
	#if !defined(CONFIG_CPU_R4000) && !defined(CONFIG_CPU_R4400)
	"Configure for R4000 or R4400 to enable the workaround."
	#else
	"Please report to <linux-mips@linux-mips.org>."
	#endif
	);
	}

	void __init check_bugs64(void)
	{
	check_mult_sh();
	check_daddi();
	check_daddiu();
	}