blob: 47a6ff7941712300dd492b2127b1b8243d47aa63 [file] [log] [blame]
/***************************************************************************
* Video4Linux driver for W996[87]CF JPEG USB Dual Mode Camera Chip. *
* *
* Copyright (C) 2002-2004 by Luca Risolia <luca.risolia@studio.unibo.it> *
* *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the Free Software *
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. *
***************************************************************************/
#ifndef _W9968CF_H_
#define _W9968CF_H_
#include <linux/videodev.h>
#include <linux/usb.h>
#include <linux/i2c.h>
#include <linux/device.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/wait.h>
#include <linux/config.h>
#include <linux/param.h>
#include <linux/types.h>
#include <linux/rwsem.h>
#include <asm/semaphore.h>
#include <media/ovcamchip.h>
#include "w9968cf_vpp.h"
/****************************************************************************
* Default values *
****************************************************************************/
#define W9968CF_OVMOD_LOAD 1 /* automatic 'ovcamchip' module loading */
#define W9968CF_VPPMOD_LOAD 1 /* automatic 'w9968cf-vpp' module loading */
/* Comment/uncomment the following line to enable/disable debugging messages */
#define W9968CF_DEBUG
/* These have effect only if W9968CF_DEBUG is defined */
#define W9968CF_DEBUG_LEVEL 2 /* from 0 to 6. 0 for no debug informations */
#define W9968CF_SPECIFIC_DEBUG 0 /* 0 or 1 */
#define W9968CF_MAX_DEVICES 32
#define W9968CF_SIMCAMS W9968CF_MAX_DEVICES /* simultaneous cameras */
#define W9968CF_MAX_BUFFERS 32
#define W9968CF_BUFFERS 2 /* n. of frame buffers from 2 to MAX_BUFFERS */
/* Maximum data payload sizes in bytes for alternate settings */
static const u16 wMaxPacketSize[] = {1023, 959, 895, 831, 767, 703, 639, 575,
511, 447, 383, 319, 255, 191, 127, 63};
#define W9968CF_PACKET_SIZE 1023 /* according to wMaxPacketSizes[] */
#define W9968CF_MIN_PACKET_SIZE 63 /* minimum value */
#define W9968CF_ISO_PACKETS 5 /* n.of packets for isochronous transfers */
#define W9968CF_USB_CTRL_TIMEOUT 1000 /* timeout (ms) for usb control commands */
#define W9968CF_URBS 2 /* n. of scheduled URBs for ISO transfer */
#define W9968CF_I2C_BUS_DELAY 4 /* delay in us for I2C bit r/w operations */
#define W9968CF_I2C_RW_RETRIES 15 /* number of max I2C r/w retries */
/* Available video formats */
struct w9968cf_format {
const u16 palette;
const u16 depth;
const u8 compression;
};
static const struct w9968cf_format w9968cf_formatlist[] = {
{ VIDEO_PALETTE_UYVY, 16, 0 }, /* original video */
{ VIDEO_PALETTE_YUV422P, 16, 1 }, /* with JPEG compression */
{ VIDEO_PALETTE_YUV420P, 12, 1 }, /* with JPEG compression */
{ VIDEO_PALETTE_YUV420, 12, 1 }, /* same as YUV420P */
{ VIDEO_PALETTE_YUYV, 16, 0 }, /* software conversion */
{ VIDEO_PALETTE_YUV422, 16, 0 }, /* software conversion */
{ VIDEO_PALETTE_GREY, 8, 0 }, /* software conversion */
{ VIDEO_PALETTE_RGB555, 16, 0 }, /* software conversion */
{ VIDEO_PALETTE_RGB565, 16, 0 }, /* software conversion */
{ VIDEO_PALETTE_RGB24, 24, 0 }, /* software conversion */
{ VIDEO_PALETTE_RGB32, 32, 0 }, /* software conversion */
{ 0, 0, 0 } /* 0 is a terminating entry */
};
#define W9968CF_DECOMPRESSION 2 /* decomp:0=disable,1=force,2=any formats */
#define W9968CF_PALETTE_DECOMP_OFF VIDEO_PALETTE_UYVY /* when decomp=0 */
#define W9968CF_PALETTE_DECOMP_FORCE VIDEO_PALETTE_YUV420P /* when decomp=1 */
#define W9968CF_PALETTE_DECOMP_ON VIDEO_PALETTE_UYVY /* when decomp=2 */
#define W9968CF_FORCE_RGB 0 /* read RGB instead of BGR, yes=1/no=0 */
#define W9968CF_MAX_WIDTH 800 /* Has effect if up-scaling is on */
#define W9968CF_MAX_HEIGHT 600 /* Has effect if up-scaling is on */
#define W9968CF_WIDTH 320 /* from 128 to 352, multiple of 16 */
#define W9968CF_HEIGHT 240 /* from 96 to 288, multiple of 16 */
#define W9968CF_CLAMPING 0 /* 0 disable, 1 enable video data clamping */
#define W9968CF_FILTER_TYPE 0 /* 0 disable 1 (1-2-1), 2 (2-3-6-3-2) */
#define W9968CF_DOUBLE_BUFFER 1 /* 0 disable, 1 enable double buffer */
#define W9968CF_LARGEVIEW 1 /* 0 disable, 1 enable */
#define W9968CF_UPSCALING 0 /* 0 disable, 1 enable */
#define W9968CF_MONOCHROME 0 /* 0 not monochrome, 1 monochrome sensor */
#define W9968CF_BRIGHTNESS 31000 /* from 0 to 65535 */
#define W9968CF_HUE 32768 /* from 0 to 65535 */
#define W9968CF_COLOUR 32768 /* from 0 to 65535 */
#define W9968CF_CONTRAST 50000 /* from 0 to 65535 */
#define W9968CF_WHITENESS 32768 /* from 0 to 65535 */
#define W9968CF_AUTOBRIGHT 0 /* 0 disable, 1 enable automatic brightness */
#define W9968CF_AUTOEXP 1 /* 0 disable, 1 enable automatic exposure */
#define W9968CF_LIGHTFREQ 50 /* light frequency. 50Hz (Europe) or 60Hz */
#define W9968CF_BANDINGFILTER 0 /* 0 disable, 1 enable banding filter */
#define W9968CF_BACKLIGHT 0 /* 0 or 1, 1=object is lit from behind */
#define W9968CF_MIRROR 0 /* 0 or 1 [don't] reverse image horizontally*/
#define W9968CF_CLOCKDIV -1 /* -1 = automatic clock divisor */
#define W9968CF_DEF_CLOCKDIVISOR 0 /* default sensor clock divisor value */
/****************************************************************************
* Globals *
****************************************************************************/
#define W9968CF_MODULE_NAME "V4L driver for W996[87]CF JPEG USB " \
"Dual Mode Camera Chip"
#define W9968CF_MODULE_VERSION "1:1.33-basic"
#define W9968CF_MODULE_AUTHOR "(C) 2002-2004 Luca Risolia"
#define W9968CF_AUTHOR_EMAIL "<luca.risolia@studio.unibo.it>"
#define W9968CF_MODULE_LICENSE "GPL"
static const struct usb_device_id winbond_id_table[] = {
{
/* Creative Labs Video Blaster WebCam Go Plus */
USB_DEVICE(0x041e, 0x4003),
.driver_info = (unsigned long)"w9968cf",
},
{
/* Generic W996[87]CF JPEG USB Dual Mode Camera */
USB_DEVICE(0x1046, 0x9967),
.driver_info = (unsigned long)"w9968cf",
},
{ } /* terminating entry */
};
/* W996[87]CF camera models, internal ids: */
enum w9968cf_model_id {
W9968CF_MOD_GENERIC = 1, /* Generic W996[87]CF based device */
W9968CF_MOD_CLVBWGP = 11,/*Creative Labs Video Blaster WebCam Go Plus*/
W9968CF_MOD_ADPVDMA = 21, /* Aroma Digi Pen VGA Dual Mode ADG-5000 */
W9986CF_MOD_AAU = 31, /* AVerMedia AVerTV USB */
W9968CF_MOD_CLVBWG = 34, /* Creative Labs Video Blaster WebCam Go */
W9968CF_MOD_LL = 37, /* Lebon LDC-035A */
W9968CF_MOD_EEEMC = 40, /* Ezonics EZ-802 EZMega Cam */
W9968CF_MOD_OOE = 42, /* OmniVision OV8610-EDE */
W9968CF_MOD_ODPVDMPC = 43,/* OPCOM Digi Pen VGA Dual Mode Pen Camera */
W9968CF_MOD_PDPII = 46, /* Pretec Digi Pen-II */
W9968CF_MOD_PDP480 = 49, /* Pretec DigiPen-480 */
};
enum w9968cf_frame_status {
F_READY, /* finished grabbing & ready to be read/synced */
F_GRABBING, /* in the process of being grabbed into */
F_ERROR, /* something bad happened while processing */
F_UNUSED /* unused (no VIDIOCMCAPTURE) */
};
struct w9968cf_frame_t {
void* buffer;
unsigned long size;
u32 length;
int number;
enum w9968cf_frame_status status;
struct w9968cf_frame_t* next;
u8 queued;
};
enum w9968cf_vpp_flag {
VPP_NONE = 0x00,
VPP_UPSCALE = 0x01,
VPP_SWAP_YUV_BYTES = 0x02,
VPP_DECOMPRESSION = 0x04,
VPP_UYVY_TO_RGBX = 0x08,
};
static struct w9968cf_vpp_t* w9968cf_vpp;
static DECLARE_WAIT_QUEUE_HEAD(w9968cf_vppmod_wait);
static LIST_HEAD(w9968cf_dev_list); /* head of V4L registered cameras list */
static DECLARE_MUTEX(w9968cf_devlist_sem); /* semaphore for list traversal */
static DECLARE_RWSEM(w9968cf_disconnect); /* prevent races with open() */
/* Main device driver structure */
struct w9968cf_device {
struct device dev; /* device structure */
enum w9968cf_model_id id; /* private device identifier */
struct video_device* v4ldev; /* -> V4L structure */
struct list_head v4llist; /* entry of the list of V4L cameras */
struct usb_device* usbdev; /* -> main USB structure */
struct urb* urb[W9968CF_URBS]; /* -> USB request block structs */
void* transfer_buffer[W9968CF_URBS]; /* -> ISO transfer buffers */
u16* control_buffer; /* -> buffer for control req.*/
u16* data_buffer; /* -> data to send to the FSB */
struct w9968cf_frame_t frame[W9968CF_MAX_BUFFERS];
struct w9968cf_frame_t frame_tmp; /* temporary frame */
struct w9968cf_frame_t frame_vpp; /* helper frame.*/
struct w9968cf_frame_t* frame_current; /* -> frame being grabbed */
struct w9968cf_frame_t* requested_frame[W9968CF_MAX_BUFFERS];
u8 max_buffers, /* number of requested buffers */
force_palette, /* yes=1/no=0 */
force_rgb, /* read RGB instead of BGR, yes=1, no=0 */
double_buffer, /* hardware double buffering yes=1/no=0 */
clamping, /* video data clamping yes=1/no=0 */
filter_type, /* 0=disabled, 1=3 tap, 2=5 tap filter */
capture, /* 0=disabled, 1=enabled */
largeview, /* 0=disabled, 1=enabled */
decompression, /* 0=disabled, 1=forced, 2=allowed */
upscaling; /* software image scaling, 0=enabled, 1=disabled */
struct video_picture picture; /* current picture settings */
struct video_window window; /* current window settings */
u16 hw_depth, /* depth (used by the chip) */
hw_palette, /* palette (used by the chip) */
hw_width, /* width (used by the chip) */
hw_height, /* height (used by the chip) */
hs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */
vs_polarity, /* 0=negative sync pulse, 1=positive sync pulse */
start_cropx, /* pixels from HS inactive edge to 1st cropped pixel*/
start_cropy; /* pixels from VS inactive edge to 1st cropped pixel*/
enum w9968cf_vpp_flag vpp_flag; /* post-processing routines in use */
u8 nbuffers, /* number of allocated frame buffers */
altsetting, /* camera alternate setting */
disconnected, /* flag: yes=1, no=0 */
misconfigured, /* flag: yes=1, no=0 */
users, /* flag: number of users holding the device */
streaming; /* flag: yes=1, no=0 */
u8 sensor_initialized; /* flag: yes=1, no=0 */
/* Determined by the image sensor type: */
int sensor, /* type of image sensor chip (CC_*) */
monochrome; /* image sensor is (probably) monochrome */
u16 maxwidth, /* maximum width supported by the image sensor */
maxheight, /* maximum height supported by the image sensor */
minwidth, /* minimum width supported by the image sensor */
minheight; /* minimum height supported by the image sensor */
u8 auto_brt, /* auto brightness enabled flag */
auto_exp, /* auto exposure enabled flag */
backlight, /* backlight exposure algorithm flag */
mirror, /* image is reversed horizontally */
lightfreq, /* power (lighting) frequency */
bandfilt; /* banding filter enabled flag */
s8 clockdiv; /* clock divisor */
/* I2C interface to kernel */
struct i2c_adapter i2c_adapter;
struct i2c_client* sensor_client;
/* Locks */
struct semaphore dev_sem, /* for probe, disconnect,open and close */
fileop_sem; /* for read and ioctl */
spinlock_t urb_lock, /* for submit_urb() and unlink_urb() */
flist_lock; /* for requested frame list accesses */
wait_queue_head_t open, wait_queue;
char command[16]; /* name of the program holding the device */
};
/****************************************************************************
* Macros for debugging *
****************************************************************************/
#undef DBG
#undef KDBG
#ifdef W9968CF_DEBUG
/* For device specific debugging messages */
# define DBG(level, fmt, args...) \
{ \
if ( ((specific_debug) && (debug == (level))) || \
((!specific_debug) && (debug >= (level))) ) { \
if ((level) == 1) \
dev_err(&cam->dev, fmt "\n", ## args); \
else if ((level) == 2 || (level) == 3) \
dev_info(&cam->dev, fmt "\n", ## args); \
else if ((level) == 4) \
dev_warn(&cam->dev, fmt "\n", ## args); \
else if ((level) >= 5) \
dev_info(&cam->dev, "[%s:%d] " fmt "\n", \
__FUNCTION__, __LINE__ , ## args); \
} \
}
/* For generic kernel (not device specific) messages */
# define KDBG(level, fmt, args...) \
{ \
if ( ((specific_debug) && (debug == (level))) || \
((!specific_debug) && (debug >= (level))) ) { \
if ((level) >= 1 && (level) <= 4) \
pr_info("w9968cf: " fmt "\n", ## args); \
else if ((level) >= 5) \
pr_debug("w9968cf: [%s:%d] " fmt "\n", __FUNCTION__, \
__LINE__ , ## args); \
} \
}
#else
/* Not debugging: nothing */
# define DBG(level, fmt, args...) do {;} while(0);
# define KDBG(level, fmt, args...) do {;} while(0);
#endif
#undef PDBG
#define PDBG(fmt, args...) \
dev_info(&cam->dev, "[%s:%d] " fmt "\n", __FUNCTION__, __LINE__ , ## args);
#undef PDBGG
#define PDBGG(fmt, args...) do {;} while(0); /* nothing: it's a placeholder */
#endif /* _W9968CF_H_ */