blob: ddd1578a7ee0a40d2877434176f7718797c9b1a4 [file] [log] [blame]
/* linux/include/asm-arm/arch-s3c2410/uncompress.h
*
* (c) 2003 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Changelog:
* 22-May-2003 BJD Created
* 08-Sep-2003 BJD Moved to linux v2.6
* 12-Mar-2004 BJD Updated header protection
* 12-Oct-2004 BJD Take account of debug uart configuration
* 15-Nov-2004 BJD Fixed uart configuration
* 22-Feb-2005 BJD Added watchdog to uncompress
* 04-Apr-2005 LCVR Added support to S3C2400 (no cpuid at GSTATUS1)
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <linux/config.h>
/* defines for UART registers */
#include "asm/arch/regs-serial.h"
#include "asm/arch/regs-gpio.h"
#include "asm/arch/regs-watchdog.h"
#include <asm/arch/map.h>
/* working in physical space... */
#undef S3C2410_GPIOREG
#undef S3C2410_WDOGREG
#define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x)))
#define S3C2410_WDOGREG(x) ((S3C2410_PA_WATCHDOG + (x)))
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
#define uart_base S3C2410_PA_UART + (0x4000*CONFIG_S3C2410_LOWLEVEL_UART_PORT)
static __inline__ void
uart_wr(unsigned int reg, unsigned int val)
{
volatile unsigned int *ptr;
ptr = (volatile unsigned int *)(reg + uart_base);
*ptr = val;
}
static __inline__ unsigned int
uart_rd(unsigned int reg)
{
volatile unsigned int *ptr;
ptr = (volatile unsigned int *)(reg + uart_base);
return *ptr;
}
/* we can deal with the case the UARTs are being run
* in FIFO mode, so that we don't hold up our execution
* waiting for tx to happen...
*/
static void
putc(char ch)
{
int cpuid = S3C2410_GSTATUS1_2410;
#ifndef CONFIG_CPU_S3C2400
cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
cpuid &= S3C2410_GSTATUS1_IDMASK;
#endif
if (ch == '\n')
putc('\r'); /* expand newline to \r\n */
if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
int level;
while (1) {
level = uart_rd(S3C2410_UFSTAT);
if (cpuid == S3C2410_GSTATUS1_2440) {
level &= S3C2440_UFSTAT_TXMASK;
level >>= S3C2440_UFSTAT_TXSHIFT;
} else {
level &= S3C2410_UFSTAT_TXMASK;
level >>= S3C2410_UFSTAT_TXSHIFT;
}
if (level < FIFO_MAX)
break;
}
} else {
/* not using fifos */
while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE);
}
/* write byte to transmission register */
uart_wr(S3C2410_UTXH, ch);
}
static void
putstr(const char *ptr)
{
for (; *ptr != '\0'; ptr++) {
putc(*ptr);
}
}
#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0)
/* CONFIG_S3C2410_BOOT_WATCHDOG
*
* Simple boot-time watchdog setup, to reboot the system if there is
* any problem with the boot process
*/
#ifdef CONFIG_S3C2410_BOOT_WATCHDOG
#define WDOG_COUNT (0xff00)
static inline void arch_decomp_wdog(void)
{
__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
}
static void arch_decomp_wdog_start(void)
{
__raw_writel(WDOG_COUNT, S3C2410_WTDAT);
__raw_writel(WDOG_COUNT, S3C2410_WTCNT);
__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
}
#else
#define arch_decomp_wdog_start()
#define arch_decomp_wdog()
#endif
#ifdef CONFIG_S3C2410_BOOT_ERROR_RESET
static void arch_decomp_error(const char *x)
{
putstr("\n\n");
putstr(x);
putstr("\n\n -- System resetting\n");
__raw_writel(0x4000, S3C2410_WTDAT);
__raw_writel(0x4000, S3C2410_WTCNT);
__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
while(1);
}
#define arch_error arch_decomp_error
#endif
static void error(char *err);
static void
arch_decomp_setup(void)
{
/* we may need to setup the uart(s) here if we are not running
* on an BAST... the BAST will have left the uarts configured
* after calling linux.
*/
arch_decomp_wdog_start();
}
#endif /* __ASM_ARCH_UNCOMPRESS_H */