| /* |
| * Carsten Langgaard, carstenl@mips.com |
| * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. |
| * |
| * This program is free software; you can distribute it and/or modify it |
| * under the terms of the GNU General Public License (Version 2) as |
| * published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope it will be useful, but WITHOUT |
| * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or |
| * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License |
| * for more details. |
| * |
| * You should have received a copy of the GNU General Public License along |
| * with this program; if not, write to the Free Software Foundation, Inc., |
| * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. |
| */ |
| #include <linux/config.h> |
| #include <linux/init.h> |
| #include <linux/sched.h> |
| #include <linux/ioport.h> |
| #include <linux/pci.h> |
| #include <linux/tty.h> |
| |
| #ifdef CONFIG_MTD |
| #include <linux/mtd/partitions.h> |
| #include <linux/mtd/physmap.h> |
| #include <linux/mtd/mtd.h> |
| #include <linux/mtd/map.h> |
| #endif |
| |
| #include <asm/cpu.h> |
| #include <asm/bootinfo.h> |
| #include <asm/irq.h> |
| #include <asm/mips-boards/generic.h> |
| #include <asm/mips-boards/prom.h> |
| #include <asm/mips-boards/malta.h> |
| #include <asm/mips-boards/maltaint.h> |
| #include <asm/dma.h> |
| #include <asm/time.h> |
| #include <asm/traps.h> |
| #ifdef CONFIG_VT |
| #include <linux/console.h> |
| #endif |
| |
| extern void mips_reboot_setup(void); |
| extern void mips_time_init(void); |
| extern void mips_timer_setup(struct irqaction *irq); |
| extern unsigned long mips_rtc_get_time(void); |
| |
| #ifdef CONFIG_KGDB |
| extern void kgdb_config(void); |
| #endif |
| |
| struct resource standard_io_resources[] = { |
| { "dma1", 0x00, 0x1f, IORESOURCE_BUSY }, |
| { "timer", 0x40, 0x5f, IORESOURCE_BUSY }, |
| { "keyboard", 0x60, 0x6f, IORESOURCE_BUSY }, |
| { "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY }, |
| { "dma2", 0xc0, 0xdf, IORESOURCE_BUSY }, |
| }; |
| |
| #ifdef CONFIG_MTD |
| static struct mtd_partition malta_mtd_partitions[] = { |
| { |
| .name = "YAMON", |
| .offset = 0x0, |
| .size = 0x100000, |
| .mask_flags = MTD_WRITEABLE |
| }, |
| { |
| .name = "User FS", |
| .offset = 0x100000, |
| .size = 0x2e0000 |
| }, |
| { |
| .name = "Board Config", |
| .offset = 0x3e0000, |
| .size = 0x020000, |
| .mask_flags = MTD_WRITEABLE |
| } |
| }; |
| |
| #define number_partitions (sizeof(malta_mtd_partitions)/sizeof(struct mtd_partition)) |
| #endif |
| |
| const char *get_system_type(void) |
| { |
| return "MIPS Malta"; |
| } |
| |
| #ifdef CONFIG_BLK_DEV_FD |
| void __init fd_activate(void) |
| { |
| /* |
| * Activate Floppy Controller in the SMSC FDC37M817 Super I/O |
| * Controller. |
| * Done by YAMON 2.00 onwards |
| */ |
| /* Entering config state. */ |
| SMSC_WRITE(SMSC_CONFIG_ENTER, SMSC_CONFIG_REG); |
| |
| /* Activate floppy controller. */ |
| SMSC_WRITE(SMSC_CONFIG_DEVNUM, SMSC_CONFIG_REG); |
| SMSC_WRITE(SMSC_CONFIG_DEVNUM_FLOPPY, SMSC_DATA_REG); |
| SMSC_WRITE(SMSC_CONFIG_ACTIVATE, SMSC_CONFIG_REG); |
| SMSC_WRITE(SMSC_CONFIG_ACTIVATE_ENABLE, SMSC_DATA_REG); |
| |
| /* Exit config state. */ |
| SMSC_WRITE(SMSC_CONFIG_EXIT, SMSC_CONFIG_REG); |
| } |
| #endif |
| |
| void __init plat_setup(void) |
| { |
| unsigned int i; |
| |
| mips_pcibios_init(); |
| |
| /* Request I/O space for devices used on the Malta board. */ |
| for (i = 0; i < ARRAY_SIZE(standard_io_resources); i++) |
| request_resource(&ioport_resource, standard_io_resources+i); |
| |
| /* |
| * Enable DMA channel 4 (cascade channel) in the PIIX4 south bridge. |
| */ |
| enable_dma(4); |
| |
| #ifdef CONFIG_KGDB |
| kgdb_config (); |
| #endif |
| |
| if ((mips_revision_corid == MIPS_REVISION_CORID_BONITO64) || |
| (mips_revision_corid == MIPS_REVISION_CORID_CORE_20K) || |
| (mips_revision_corid == MIPS_REVISION_CORID_CORE_EMUL_BON)) { |
| char *argptr; |
| |
| argptr = prom_getcmdline(); |
| if (strstr(argptr, "debug")) { |
| BONITO_BONGENCFG |= BONITO_BONGENCFG_DEBUGMODE; |
| printk ("Enabled Bonito debug mode\n"); |
| } |
| else |
| BONITO_BONGENCFG &= ~BONITO_BONGENCFG_DEBUGMODE; |
| |
| #ifdef CONFIG_DMA_COHERENT |
| if (BONITO_PCICACHECTRL & BONITO_PCICACHECTRL_CPUCOH_PRES) { |
| BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_CPUCOH_EN; |
| printk("Enabled Bonito CPU coherency\n"); |
| |
| argptr = prom_getcmdline(); |
| if (strstr(argptr, "iobcuncached")) { |
| BONITO_PCICACHECTRL &= ~BONITO_PCICACHECTRL_IOBCCOH_EN; |
| BONITO_PCIMEMBASECFG = BONITO_PCIMEMBASECFG & |
| ~(BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | |
| BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); |
| printk("Disabled Bonito IOBC coherency\n"); |
| } |
| else { |
| BONITO_PCICACHECTRL |= BONITO_PCICACHECTRL_IOBCCOH_EN; |
| BONITO_PCIMEMBASECFG |= |
| (BONITO_PCIMEMBASECFG_MEMBASE0_CACHED | |
| BONITO_PCIMEMBASECFG_MEMBASE1_CACHED); |
| printk("Disabled Bonito IOBC coherency\n"); |
| } |
| } |
| else |
| panic("Hardware DMA cache coherency not supported"); |
| |
| #endif |
| } |
| #ifdef CONFIG_DMA_COHERENT |
| else { |
| panic("Hardware DMA cache coherency not supported"); |
| } |
| #endif |
| |
| #ifdef CONFIG_BLK_DEV_IDE |
| /* Check PCI clock */ |
| { |
| int jmpr = (*((volatile unsigned int *)ioremap(MALTA_JMPRS_REG, sizeof(unsigned int))) >> 2) & 0x07; |
| static const int pciclocks[] __initdata = { |
| 33, 20, 25, 30, 12, 16, 37, 10 |
| }; |
| int pciclock = pciclocks[jmpr]; |
| char *argptr = prom_getcmdline(); |
| |
| if (pciclock != 33 && !strstr (argptr, "idebus=")) { |
| printk("WARNING: PCI clock is %dMHz, setting idebus\n", pciclock); |
| argptr += strlen(argptr); |
| sprintf (argptr, " idebus=%d", pciclock); |
| if (pciclock < 20 || pciclock > 66) |
| printk ("WARNING: IDE timing calculations will be incorrect\n"); |
| } |
| } |
| #endif |
| #ifdef CONFIG_BLK_DEV_FD |
| fd_activate (); |
| #endif |
| #ifdef CONFIG_VT |
| #if defined(CONFIG_VGA_CONSOLE) |
| screen_info = (struct screen_info) { |
| 0, 25, /* orig-x, orig-y */ |
| 0, /* unused */ |
| 0, /* orig-video-page */ |
| 0, /* orig-video-mode */ |
| 80, /* orig-video-cols */ |
| 0,0,0, /* ega_ax, ega_bx, ega_cx */ |
| 25, /* orig-video-lines */ |
| VIDEO_TYPE_VGAC, /* orig-video-isVGA */ |
| 16 /* orig-video-points */ |
| }; |
| #endif |
| #endif |
| |
| #ifdef CONFIG_MTD |
| /* |
| * Support for MTD on Malta. Use the generic physmap driver |
| */ |
| physmap_configure(0x1e000000, 0x400000, 4, NULL); |
| physmap_set_partitions(malta_mtd_partitions, number_partitions); |
| #endif |
| |
| mips_reboot_setup(); |
| |
| board_time_init = mips_time_init; |
| board_timer_setup = mips_timer_setup; |
| rtc_get_time = mips_rtc_get_time; |
| } |