| /* This is the single file included by all MPC8xx build options. |
| * Since there are many different boards and no standard configuration, |
| * we have a unique include file for each. Rather than change every |
| * file that has to include MPC8xx configuration, they all include |
| * this one and the configuration switching is done here. |
| */ |
| #ifdef __KERNEL__ |
| #ifndef __CONFIG_8xx_DEFS |
| #define __CONFIG_8xx_DEFS |
| |
| #include <linux/config.h> |
| |
| #ifdef CONFIG_8xx |
| |
| #ifdef CONFIG_MBX |
| #include <platforms/mbx.h> |
| #endif |
| |
| #ifdef CONFIG_FADS |
| #include <platforms/fads.h> |
| #endif |
| |
| #ifdef CONFIG_RPXLITE |
| #include <platforms/rpxlite.h> |
| #endif |
| |
| #ifdef CONFIG_BSEIP |
| #include <platforms/bseip.h> |
| #endif |
| |
| #ifdef CONFIG_RPXCLASSIC |
| #include <platforms/rpxclassic.h> |
| #endif |
| |
| #if defined(CONFIG_TQM8xxL) |
| #include <platforms/tqm8xx.h> |
| #endif |
| |
| #if defined(CONFIG_IVMS8) || defined(CONFIG_IVML24) |
| #include <platforms/ivms8.h> |
| #endif |
| |
| #if defined(CONFIG_HERMES_PRO) |
| #include <platforms/hermes.h> |
| #endif |
| |
| #if defined(CONFIG_IP860) |
| #include <platforms/ip860.h> |
| #endif |
| |
| #if defined(CONFIG_LWMON) |
| #include <platforms/lwmon.h> |
| #endif |
| |
| #if defined(CONFIG_PCU_E) |
| #include <platforms/pcu_e.h> |
| #endif |
| |
| #if defined(CONFIG_CCM) |
| #include <platforms/ccm.h> |
| #endif |
| |
| #if defined(CONFIG_LANTEC) |
| #include <platforms/lantec.h> |
| #endif |
| |
| #if defined(CONFIG_MPC885ADS) |
| #include <platforms/mpc885ads.h> |
| #endif |
| |
| /* Currently, all 8xx boards that support a processor to PCI/ISA bridge |
| * use the same memory map. |
| */ |
| #if 0 |
| #if defined(CONFIG_PCI) && defined(PCI_ISA_IO_ADDR) |
| #define _IO_BASE PCI_ISA_IO_ADDR |
| #define _ISA_MEM_BASE PCI_ISA_MEM_ADDR |
| #define PCI_DRAM_OFFSET 0x80000000 |
| #else |
| #define _IO_BASE 0 |
| #define _ISA_MEM_BASE 0 |
| #define PCI_DRAM_OFFSET 0 |
| #endif |
| #else |
| #if !defined(_IO_BASE) /* defined in board specific header */ |
| #define _IO_BASE 0 |
| #endif |
| #define _ISA_MEM_BASE 0 |
| #define PCI_DRAM_OFFSET 0 |
| #endif |
| |
| #ifndef __ASSEMBLY__ |
| /* The "residual" data board information structure the boot loader |
| * hands to us. |
| */ |
| extern unsigned char __res[]; |
| |
| struct pt_regs; |
| |
| enum ppc_sys_devices { |
| MPC8xx_CPM_FEC1, |
| MPC8xx_CPM_FEC2, |
| MPC8xx_CPM_I2C, |
| MPC8xx_CPM_SCC1, |
| MPC8xx_CPM_SCC2, |
| MPC8xx_CPM_SCC3, |
| MPC8xx_CPM_SCC4, |
| MPC8xx_CPM_SPI, |
| MPC8xx_CPM_MCC1, |
| MPC8xx_CPM_MCC2, |
| MPC8xx_CPM_SMC1, |
| MPC8xx_CPM_SMC2, |
| MPC8xx_CPM_USB, |
| }; |
| |
| #ifndef BOARD_CHIP_NAME |
| #define BOARD_CHIP_NAME "" |
| #endif |
| |
| #endif /* !__ASSEMBLY__ */ |
| #endif /* CONFIG_8xx */ |
| #endif /* __CONFIG_8xx_DEFS */ |
| #endif /* __KERNEL__ */ |