drivers/usb/host/ehci-pci.c - maze/linux - Git at Google

 /*
  * EHCI HCD (Host Controller Driver) PCI Bus Glue.
  *
  * Copyright (c) 2000-2004 by David Brownell
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
  * Free Software Foundation; either version 2 of the License, or (at your
  * option) any later version.
  *
  * This program is distributed in the hope that it will be useful, but
  * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
  * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
  * for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software Foundation,
  * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */

 #ifndef CONFIG_PCI
 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
 #endif

 /*-------------------------------------------------------------------------*/

 /* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
  * off the controller (maybe it can boot from highspeed USB disks).
  */
 static int bios_handoff(struct ehci_hcd *ehci, int where, u32 cap)
 {
 	struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);

 	/* always say Linux will own the hardware */
 	pci_write_config_byte(pdev, where + 3, 1);

 	/* maybe wait a while for BIOS to respond */
 	if (cap & (1 << 16)) {
 		int msec = 5000;

 		do {
 			msleep(10);
 			msec -= 10;
 			pci_read_config_dword(pdev, where, &cap);
 		} while ((cap & (1 << 16)) && msec);
 		if (cap & (1 << 16)) {
 			ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
 				where, cap);
 			// some BIOS versions seem buggy...
 			// return 1;
 			ehci_warn(ehci, "continuing after BIOS bug...\n");
 			/* disable all SMIs, and clear "BIOS owns" flag */
 			pci_write_config_dword(pdev, where + 4, 0);
 			pci_write_config_byte(pdev, where + 2, 0);
 		} else
 			ehci_dbg(ehci, "BIOS handoff succeeded\n");
 	}
 	return 0;
 }

 /* called after powerup, by probe or system-pm "wakeup" */
 static int ehci_pci_reinit(struct ehci_hcd *ehci, struct pci_dev *pdev)
 {
 	u32			temp;
 	int			retval;
 	unsigned		count = 256/4;

 	/* optional debug port, normally in the first BAR */
 	temp = pci_find_capability(pdev, 0x0a);
 	if (temp) {
 		pci_read_config_dword(pdev, temp, &temp);
 		temp >>= 16;
 		if ((temp & (3 << 13)) == (1 << 13)) {
 			temp &= 0x1fff;
 			ehci->debug = ehci_to_hcd(ehci)->regs + temp;
 			temp = readl(&ehci->debug->control);
 			ehci_info(ehci, "debug port %d%s\n",
 				HCS_DEBUG_PORT(ehci->hcs_params),
 				(temp & DBGP_ENABLED)
 					? " IN USE"
 					: "");
 			if (!(temp & DBGP_ENABLED))
 				ehci->debug = NULL;
 		}
 	}

 	temp = HCC_EXT_CAPS(readl(&ehci->caps->hcc_params));

 	/* EHCI 0.96 and later may have "extended capabilities" */
 	while (temp && count--) {
 		u32		cap;

 		pci_read_config_dword(pdev, temp, &cap);
 		ehci_dbg(ehci, "capability %04x at %02x\n", cap, temp);
 		switch (cap & 0xff) {
 		case 1:			/* BIOS/SMM/... handoff */
 			if (bios_handoff(ehci, temp, cap) != 0)
 				return -EOPNOTSUPP;
 			break;
 		case 0:			/* illegal reserved capability */
 			ehci_dbg(ehci, "illegal capability!\n");
 			cap = 0;
 			/* FALLTHROUGH */
 		default:		/* unknown */
 			break;
 		}
 		temp = (cap >> 8) & 0xff;
 	}
 	if (!count) {
 		ehci_err(ehci, "bogus capabilities ... PCI problems!\n");
 		return -EIO;
 	}

 	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
 	retval = pci_set_mwi(pdev);
 	if (!retval)
 		ehci_dbg(ehci, "MWI active\n");

 	ehci_port_power(ehci, 0);

 	return 0;
 }

 /* called by khubd or root hub (re)init threads; leaves HC in halt state */
 static int ehci_pci_reset(struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	u32			temp;
 	int			retval;

 	ehci->caps = hcd->regs;
 	ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
 	dbg_hcs_params(ehci, "reset");
 	dbg_hcc_params(ehci, "reset");

 	/* cache this readonly data; minimize chip reads */
 	ehci->hcs_params = readl(&ehci->caps->hcs_params);

 	retval = ehci_halt(ehci);
 	if (retval)
 		return retval;

 	/* NOTE:  only the parts below this line are PCI-specific */

 	switch (pdev->vendor) {
 	case PCI_VENDOR_ID_TDI:
 		if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
 			ehci->is_tdi_rh_tt = 1;
 			tdi_reset(ehci);
 		}
 		break;
 	case PCI_VENDOR_ID_AMD:
 		/* AMD8111 EHCI doesn't work, according to AMD errata */
 		if (pdev->device == 0x7463) {
 			ehci_info(ehci, "ignoring AMD8111 (errata)\n");
 			return -EIO;
 		}
 		break;
 	case PCI_VENDOR_ID_NVIDIA:
 		/* NVidia reports that certain chips don't handle
 		 * QH, ITD, or SITD addresses above 2GB.  (But TD,
 		 * data buffer, and periodic schedule are normal.)
 		 */
 		switch (pdev->device) {
 		case 0x003c:	/* MCP04 */
 		case 0x005b:	/* CK804 */
 		case 0x00d8:	/* CK8 */
 		case 0x00e8:	/* CK8S */
 			if (pci_set_consistent_dma_mask(pdev,
 						DMA_31BIT_MASK) < 0)
 				ehci_warn(ehci, "can't enable NVidia "
 					"workaround for >2GB RAM\n");
 			break;
 		}
 		break;
 	}

 	if (ehci_is_TDI(ehci))
 		ehci_reset(ehci);

 	/* at least the Genesys GL880S needs fixup here */
 	temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
 	temp &= 0x0f;
 	if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
 		ehci_dbg(ehci, "bogus port configuration: "
 			"cc=%d x pcc=%d < ports=%d\n",
 			HCS_N_CC(ehci->hcs_params),
 			HCS_N_PCC(ehci->hcs_params),
 			HCS_N_PORTS(ehci->hcs_params));

 		switch (pdev->vendor) {
 		case 0x17a0:		/* GENESYS */
 			/* GL880S: should be PORTS=2 */
 			temp |= (ehci->hcs_params & ~0xf);
 			ehci->hcs_params = temp;
 			break;
 		case PCI_VENDOR_ID_NVIDIA:
 			/* NF4: should be PCC=10 */
 			break;
 		}
 	}

 	/* Serial Bus Release Number is at PCI 0x60 offset */
 	pci_read_config_byte(pdev, 0x60, &ehci->sbrn);

 	/* REVISIT:  per-port wake capability (PCI 0x62) currently unused */

 	retval = ehci_pci_reinit(ehci, pdev);

 	/* finish init */
 	return ehci_init(hcd);
 }

 /*-------------------------------------------------------------------------*/

 #ifdef	CONFIG_PM

 /* suspend/resume, section 4.3 */

 /* These routines rely on the PCI bus glue
  * to handle powerdown and wakeup, and currently also on
  * transceivers that don't need any software attention to set up
  * the right sort of wakeup.
  * Also they depend on separate root hub suspend/resume.
  */

 static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);

 	if (time_before(jiffies, ehci->next_statechange))
 		msleep(10);

 	// could save FLADJ in case of Vaux power loss
 	// ... we'd only use it to handle clock skew

 	return 0;
 }

 static int ehci_pci_resume(struct usb_hcd *hcd)
 {
 	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
 	unsigned		port;
 	struct usb_device	*root = hcd->self.root_hub;
 	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
 	int			retval = -EINVAL;

 	// maybe restore FLADJ

 	if (time_before(jiffies, ehci->next_statechange))
 		msleep(100);

 	/* If CF is clear, we lost PCI Vaux power and need to restart.  */
 	if (readl(&ehci->regs->configured_flag) != FLAG_CF)
 		goto restart;

 	/* If any port is suspended (or owned by the companion),
 	 * we know we can/must resume the HC (and mustn't reset it).
 	 * We just defer that to the root hub code.
 	 */
 	for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
 		u32	status;
 		port--;
 		status = readl(&ehci->regs->port_status [port]);
 		if (!(status & PORT_POWER))
 			continue;
 		if (status & (PORT_SUSPEND | PORT_RESUME | PORT_OWNER)) {
 			usb_hcd_resume_root_hub(hcd);
 			return 0;
 		}
 	}

 restart:
 	ehci_dbg(ehci, "lost power, restarting\n");
 	for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
 		port--;
 		if (!root->children [port])
 			continue;
 		usb_set_device_state(root->children[port],
 					USB_STATE_NOTATTACHED);
 	}

 	/* Else reset, to cope with power loss or flush-to-storage
 	 * style "resume" having let BIOS kick in during reboot.
 	 */
 	(void) ehci_halt(ehci);
 	(void) ehci_reset(ehci);
 	(void) ehci_pci_reinit(ehci, pdev);

 	/* emptying the schedule aborts any urbs */
 	spin_lock_irq(&ehci->lock);
 	if (ehci->reclaim)
 		ehci->reclaim_ready = 1;
 	ehci_work(ehci, NULL);
 	spin_unlock_irq(&ehci->lock);

 	/* restart; khubd will disconnect devices */
 	retval = ehci_run(hcd);

 	/* here we "know" root ports should always stay powered */
 	ehci_port_power(ehci, 1);

 	return retval;
 }
 #endif

 static const struct hc_driver ehci_pci_hc_driver = {
 	.description =		hcd_name,
 	.product_desc =		"EHCI Host Controller",
 	.hcd_priv_size =	sizeof(struct ehci_hcd),

 	/*
 	 * generic hardware linkage
 	 */
 	.irq =			ehci_irq,
 	.flags =		HCD_MEMORY | HCD_USB2,

 	/*
 	 * basic lifecycle operations
 	 */
 	.reset =		ehci_pci_reset,
 	.start =		ehci_run,
 #ifdef	CONFIG_PM
 	.suspend =		ehci_pci_suspend,
 	.resume =		ehci_pci_resume,
 #endif
 	.stop =			ehci_stop,

 	/*
 	 * managing i/o requests and associated device resources
 	 */
 	.urb_enqueue =		ehci_urb_enqueue,
 	.urb_dequeue =		ehci_urb_dequeue,
 	.endpoint_disable =	ehci_endpoint_disable,

 	/*
 	 * scheduling support
 	 */
 	.get_frame_number =	ehci_get_frame,

 	/*
 	 * root hub support
 	 */
 	.hub_status_data =	ehci_hub_status_data,
 	.hub_control =		ehci_hub_control,
 	.bus_suspend =		ehci_bus_suspend,
 	.bus_resume =		ehci_bus_resume,
 };

 /*-------------------------------------------------------------------------*/

 /* PCI driver selection metadata; PCI hotplugging uses this */
 static const struct pci_device_id pci_ids [] = { {
 	/* handle any USB 2.0 EHCI controller */
 	PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) | 0x20), ~0),
 	.driver_data =	(unsigned long) &ehci_pci_hc_driver,
 	},
 	{ /* end: all zeroes */ }
 };
 MODULE_DEVICE_TABLE(pci, pci_ids);

 /* pci driver glue; this is a "new style" PCI driver module */
 static struct pci_driver ehci_pci_driver = {
 	.name =		(char *) hcd_name,
 	.id_table =	pci_ids,

 	.probe =	usb_hcd_pci_probe,
 	.remove =	usb_hcd_pci_remove,

 #ifdef	CONFIG_PM
 	.suspend =	usb_hcd_pci_suspend,
 	.resume =	usb_hcd_pci_resume,
 #endif
 };

 static int __init ehci_hcd_pci_init(void)
 {
 	if (usb_disabled())
 		return -ENODEV;

 	pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
 		hcd_name,
 		sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
 		sizeof(struct ehci_itd), sizeof(struct ehci_sitd));

 	return pci_register_driver(&ehci_pci_driver);
 }
 module_init(ehci_hcd_pci_init);

 static void __exit ehci_hcd_pci_cleanup(void)
 {
 	pci_unregister_driver(&ehci_pci_driver);
 }
 module_exit(ehci_hcd_pci_cleanup);
	/*
	* EHCI HCD (Host Controller Driver) PCI Bus Glue.
	*
	* Copyright (c) 2000-2004 by David Brownell
	*
	* This program is free software; you can redistribute it and/or modify it
	* under the terms of the GNU General Public License as published by the
	* Free Software Foundation; either version 2 of the License, or (at your
	* option) any later version.
	*
	* This program is distributed in the hope that it will be useful, but
	* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
	* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	* for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software Foundation,
	* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	*/

	#ifndef CONFIG_PCI
	#error "This file is PCI bus glue. CONFIG_PCI must be defined."
	#endif

	/-------------------------------------------------------------------------/

	/* EHCI 0.96 (and later) section 5.1 says how to kick BIOS/SMM/...
	* off the controller (maybe it can boot from highspeed USB disks).
	*/
	static int bios_handoff(struct ehci_hcd *ehci, int where, u32 cap)
	{
	struct pci_dev *pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);

	/* always say Linux will own the hardware */
	pci_write_config_byte(pdev, where + 3, 1);

	/* maybe wait a while for BIOS to respond */
	if (cap & (1 << 16)) {
	int msec = 5000;

	do {
	msleep(10);
	msec -= 10;
	pci_read_config_dword(pdev, where, &cap);
	} while ((cap & (1 << 16)) && msec);
	if (cap & (1 << 16)) {
	ehci_err(ehci, "BIOS handoff failed (%d, %08x)\n",
	where, cap);
	// some BIOS versions seem buggy...
	// return 1;
	ehci_warn(ehci, "continuing after BIOS bug...\n");
	/* disable all SMIs, and clear "BIOS owns" flag */
	pci_write_config_dword(pdev, where + 4, 0);
	pci_write_config_byte(pdev, where + 2, 0);
	} else
	ehci_dbg(ehci, "BIOS handoff succeeded\n");
	}
	return 0;
	}

	/* called after powerup, by probe or system-pm "wakeup" */
	static int ehci_pci_reinit(struct ehci_hcd ehci, struct pci_dev pdev)
	{
	u32 temp;
	int retval;
	unsigned count = 256/4;

	/* optional debug port, normally in the first BAR */
	temp = pci_find_capability(pdev, 0x0a);
	if (temp) {
	pci_read_config_dword(pdev, temp, &temp);
	temp >>= 16;
	if ((temp & (3 << 13)) == (1 << 13)) {
	temp &= 0x1fff;
	ehci->debug = ehci_to_hcd(ehci)->regs + temp;
	temp = readl(&ehci->debug->control);
	ehci_info(ehci, "debug port %d%s\n",
	HCS_DEBUG_PORT(ehci->hcs_params),
	(temp & DBGP_ENABLED)
	? " IN USE"
	: "");
	if (!(temp & DBGP_ENABLED))
	ehci->debug = NULL;
	}
	}

	temp = HCC_EXT_CAPS(readl(&ehci->caps->hcc_params));

	/* EHCI 0.96 and later may have "extended capabilities" */
	while (temp && count--) {
	u32 cap;

	pci_read_config_dword(pdev, temp, &cap);
	ehci_dbg(ehci, "capability %04x at %02x\n", cap, temp);
	switch (cap & 0xff) {
	case 1: /* BIOS/SMM/... handoff */
	if (bios_handoff(ehci, temp, cap) != 0)
	return -EOPNOTSUPP;
	break;
	case 0: /* illegal reserved capability */
	ehci_dbg(ehci, "illegal capability!\n");
	cap = 0;
	/* FALLTHROUGH */
	default: /* unknown */
	break;
	}
	temp = (cap >> 8) & 0xff;
	}
	if (!count) {
	ehci_err(ehci, "bogus capabilities ... PCI problems!\n");
	return -EIO;
	}

	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
	retval = pci_set_mwi(pdev);
	if (!retval)
	ehci_dbg(ehci, "MWI active\n");

	ehci_port_power(ehci, 0);

	return 0;
	}

	/* called by khubd or root hub (re)init threads; leaves HC in halt state */
	static int ehci_pci_reset(struct usb_hcd *hcd)
	{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
	u32 temp;
	int retval;

	ehci->caps = hcd->regs;
	ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
	dbg_hcs_params(ehci, "reset");
	dbg_hcc_params(ehci, "reset");

	/* cache this readonly data; minimize chip reads */
	ehci->hcs_params = readl(&ehci->caps->hcs_params);

	retval = ehci_halt(ehci);
	if (retval)
	return retval;

	/* NOTE: only the parts below this line are PCI-specific */

	switch (pdev->vendor) {
	case PCI_VENDOR_ID_TDI:
	if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) {
	ehci->is_tdi_rh_tt = 1;
	tdi_reset(ehci);
	}
	break;
	case PCI_VENDOR_ID_AMD:
	/* AMD8111 EHCI doesn't work, according to AMD errata */
	if (pdev->device == 0x7463) {
	ehci_info(ehci, "ignoring AMD8111 (errata)\n");
	return -EIO;
	}
	break;
	case PCI_VENDOR_ID_NVIDIA:
	/* NVidia reports that certain chips don't handle
	* QH, ITD, or SITD addresses above 2GB. (But TD,
	* data buffer, and periodic schedule are normal.)
	*/
	switch (pdev->device) {
	case 0x003c: /* MCP04 */
	case 0x005b: /* CK804 */
	case 0x00d8: /* CK8 */
	case 0x00e8: /* CK8S */
	if (pci_set_consistent_dma_mask(pdev,
	DMA_31BIT_MASK) < 0)
	ehci_warn(ehci, "can't enable NVidia "
	"workaround for >2GB RAM\n");
	break;
	}
	break;
	}

	if (ehci_is_TDI(ehci))
	ehci_reset(ehci);

	/* at least the Genesys GL880S needs fixup here */
	temp = HCS_N_CC(ehci->hcs_params) * HCS_N_PCC(ehci->hcs_params);
	temp &= 0x0f;
	if (temp && HCS_N_PORTS(ehci->hcs_params) > temp) {
	ehci_dbg(ehci, "bogus port configuration: "
	"cc=%d x pcc=%d < ports=%d\n",
	HCS_N_CC(ehci->hcs_params),
	HCS_N_PCC(ehci->hcs_params),
	HCS_N_PORTS(ehci->hcs_params));

	switch (pdev->vendor) {
	case 0x17a0: /* GENESYS */
	/* GL880S: should be PORTS=2 */
	temp \|= (ehci->hcs_params & ~0xf);
	ehci->hcs_params = temp;
	break;
	case PCI_VENDOR_ID_NVIDIA:
	/* NF4: should be PCC=10 */
	break;
	}
	}

	/* Serial Bus Release Number is at PCI 0x60 offset */
	pci_read_config_byte(pdev, 0x60, &ehci->sbrn);

	/* REVISIT: per-port wake capability (PCI 0x62) currently unused */

	retval = ehci_pci_reinit(ehci, pdev);

	/* finish init */
	return ehci_init(hcd);
	}

	/-------------------------------------------------------------------------/

	#ifdef CONFIG_PM

	/* suspend/resume, section 4.3 */

	/* These routines rely on the PCI bus glue
	* to handle powerdown and wakeup, and currently also on
	* transceivers that don't need any software attention to set up
	* the right sort of wakeup.
	* Also they depend on separate root hub suspend/resume.
	*/

	static int ehci_pci_suspend(struct usb_hcd *hcd, pm_message_t message)
	{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);

	if (time_before(jiffies, ehci->next_statechange))
	msleep(10);

	// could save FLADJ in case of Vaux power loss
	// ... we'd only use it to handle clock skew

	return 0;
	}

	static int ehci_pci_resume(struct usb_hcd *hcd)
	{
	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
	unsigned port;
	struct usb_device *root = hcd->self.root_hub;
	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
	int retval = -EINVAL;

	// maybe restore FLADJ

	if (time_before(jiffies, ehci->next_statechange))
	msleep(100);

	/* If CF is clear, we lost PCI Vaux power and need to restart. */
	if (readl(&ehci->regs->configured_flag) != FLAG_CF)
	goto restart;

	/* If any port is suspended (or owned by the companion),
	* we know we can/must resume the HC (and mustn't reset it).
	* We just defer that to the root hub code.
	*/
	for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
	u32 status;
	port--;
	status = readl(&ehci->regs->port_status [port]);
	if (!(status & PORT_POWER))
	continue;
	if (status & (PORT_SUSPEND \| PORT_RESUME \| PORT_OWNER)) {
	usb_hcd_resume_root_hub(hcd);
	return 0;
	}
	}

	restart:
	ehci_dbg(ehci, "lost power, restarting\n");
	for (port = HCS_N_PORTS(ehci->hcs_params); port > 0; ) {
	port--;
	if (!root->children [port])
	continue;
	usb_set_device_state(root->children[port],
	USB_STATE_NOTATTACHED);
	}

	/* Else reset, to cope with power loss or flush-to-storage
	* style "resume" having let BIOS kick in during reboot.
	*/
	(void) ehci_halt(ehci);
	(void) ehci_reset(ehci);
	(void) ehci_pci_reinit(ehci, pdev);

	/* emptying the schedule aborts any urbs */
	spin_lock_irq(&ehci->lock);
	if (ehci->reclaim)
	ehci->reclaim_ready = 1;
	ehci_work(ehci, NULL);
	spin_unlock_irq(&ehci->lock);

	/* restart; khubd will disconnect devices */
	retval = ehci_run(hcd);

	/* here we "know" root ports should always stay powered */
	ehci_port_power(ehci, 1);

	return retval;
	}
	#endif

	static const struct hc_driver ehci_pci_hc_driver = {
	.description = hcd_name,
	.product_desc = "EHCI Host Controller",
	.hcd_priv_size = sizeof(struct ehci_hcd),

	/*
	* generic hardware linkage
	*/
	.irq = ehci_irq,
	.flags = HCD_MEMORY \| HCD_USB2,

	/*
	* basic lifecycle operations
	*/
	.reset = ehci_pci_reset,
	.start = ehci_run,
	#ifdef CONFIG_PM
	.suspend = ehci_pci_suspend,
	.resume = ehci_pci_resume,
	#endif
	.stop = ehci_stop,

	/*
	* managing i/o requests and associated device resources
	*/
	.urb_enqueue = ehci_urb_enqueue,
	.urb_dequeue = ehci_urb_dequeue,
	.endpoint_disable = ehci_endpoint_disable,

	/*
	* scheduling support
	*/
	.get_frame_number = ehci_get_frame,

	/*
	* root hub support
	*/
	.hub_status_data = ehci_hub_status_data,
	.hub_control = ehci_hub_control,
	.bus_suspend = ehci_bus_suspend,
	.bus_resume = ehci_bus_resume,
	};

	/-------------------------------------------------------------------------/

	/* PCI driver selection metadata; PCI hotplugging uses this */
	static const struct pci_device_id pci_ids [] = { {
	/* handle any USB 2.0 EHCI controller */
	PCI_DEVICE_CLASS(((PCI_CLASS_SERIAL_USB << 8) \| 0x20), ~0),
	.driver_data = (unsigned long) &ehci_pci_hc_driver,
	},
	{ /* end: all zeroes */ }
	};
	MODULE_DEVICE_TABLE(pci, pci_ids);

	/* pci driver glue; this is a "new style" PCI driver module */
	static struct pci_driver ehci_pci_driver = {
	.name = (char *) hcd_name,
	.id_table = pci_ids,

	.probe = usb_hcd_pci_probe,
	.remove = usb_hcd_pci_remove,

	#ifdef CONFIG_PM
	.suspend = usb_hcd_pci_suspend,
	.resume = usb_hcd_pci_resume,
	#endif
	};

	static int __init ehci_hcd_pci_init(void)
	{
	if (usb_disabled())
	return -ENODEV;

	pr_debug("%s: block sizes: qh %Zd qtd %Zd itd %Zd sitd %Zd\n",
	hcd_name,
	sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
	sizeof(struct ehci_itd), sizeof(struct ehci_sitd));

	return pci_register_driver(&ehci_pci_driver);
	}
	module_init(ehci_hcd_pci_init);

	static void __exit ehci_hcd_pci_cleanup(void)
	{
	pci_unregister_driver(&ehci_pci_driver);
	}
	module_exit(ehci_hcd_pci_cleanup);