blob: 8cbae21d84b9bc6634c8f5854eac91d221d99ed3 [file] [log] [blame]
/*
* USB device controllers have lots of quirks. Use these macros in
* gadget drivers or other code that needs to deal with them, and which
* autoconfigures instead of using early binding to the hardware.
*
* This could eventually work like the ARM mach_is_*() stuff, driven by
* some config file that gets updated as new hardware is supported.
* (And avoiding the runtime comparisons in typical one-choice cases.)
*
* NOTE: some of these controller drivers may not be available yet.
*/
#ifdef CONFIG_USB_GADGET_NET2280
#define gadget_is_net2280(g) !strcmp("net2280", (g)->name)
#else
#define gadget_is_net2280(g) 0
#endif
#ifdef CONFIG_USB_GADGET_DUMMY_HCD
#define gadget_is_dummy(g) !strcmp("dummy_udc", (g)->name)
#else
#define gadget_is_dummy(g) 0
#endif
#ifdef CONFIG_USB_GADGET_PXA2XX
#define gadget_is_pxa(g) !strcmp("pxa2xx_udc", (g)->name)
#else
#define gadget_is_pxa(g) 0
#endif
#ifdef CONFIG_USB_GADGET_GOKU
#define gadget_is_goku(g) !strcmp("goku_udc", (g)->name)
#else
#define gadget_is_goku(g) 0
#endif
#ifdef CONFIG_USB_GADGET_SUPERH
#define gadget_is_sh(g) !strcmp("sh_udc", (g)->name)
#else
#define gadget_is_sh(g) 0
#endif
#ifdef CONFIG_USB_GADGET_SA1100
#define gadget_is_sa1100(g) !strcmp("sa1100_udc", (g)->name)
#else
#define gadget_is_sa1100(g) 0
#endif
#ifdef CONFIG_USB_GADGET_LH7A40X
#define gadget_is_lh7a40x(g) !strcmp("lh7a40x_udc", (g)->name)
#else
#define gadget_is_lh7a40x(g) 0
#endif
#ifdef CONFIG_USB_GADGET_MQ11XX
#define gadget_is_mq11xx(g) !strcmp("mq11xx_udc", (g)->name)
#else
#define gadget_is_mq11xx(g) 0
#endif
#ifdef CONFIG_USB_GADGET_OMAP
#define gadget_is_omap(g) !strcmp("omap_udc", (g)->name)
#else
#define gadget_is_omap(g) 0
#endif
#ifdef CONFIG_USB_GADGET_N9604
#define gadget_is_n9604(g) !strcmp("n9604_udc", (g)->name)
#else
#define gadget_is_n9604(g) 0
#endif
#ifdef CONFIG_USB_GADGET_PXA27X
#define gadget_is_pxa27x(g) !strcmp("pxa27x_udc", (g)->name)
#else
#define gadget_is_pxa27x(g) 0
#endif
#ifdef CONFIG_USB_GADGET_S3C2410
#define gadget_is_s3c2410(g) !strcmp("s3c2410_udc", (g)->name)
#else
#define gadget_is_s3c2410(g) 0
#endif
#ifdef CONFIG_USB_GADGET_AT91
#define gadget_is_at91(g) !strcmp("at91_udc", (g)->name)
#else
#define gadget_is_at91(g) 0
#endif
#ifdef CONFIG_USB_GADGET_IMX
#define gadget_is_imx(g) !strcmp("imx_udc", (g)->name)
#else
#define gadget_is_imx(g) 0
#endif
// CONFIG_USB_GADGET_SX2
// CONFIG_USB_GADGET_AU1X00
// ...
/**
* usb_gadget_controller_number - support bcdDevice id convention
* @gadget: the controller being driven
*
* Return a 2-digit BCD value associated with the peripheral controller,
* suitable for use as part of a bcdDevice value, or a negative error code.
*
* NOTE: this convention is purely optional, and has no meaning in terms of
* any USB specification. If you want to use a different convention in your
* gadget driver firmware -- maybe a more formal revision ID -- feel free.
*
* Hosts see these bcdDevice numbers, and are allowed (but not encouraged!)
* to change their behavior accordingly. For example it might help avoiding
* some chip bug.
*/
static inline int usb_gadget_controller_number(struct usb_gadget *gadget)
{
if (gadget_is_net2280(gadget))
return 0x01;
else if (gadget_is_dummy(gadget))
return 0x02;
else if (gadget_is_pxa(gadget))
return 0x03;
else if (gadget_is_sh(gadget))
return 0x04;
else if (gadget_is_sa1100(gadget))
return 0x05;
else if (gadget_is_goku(gadget))
return 0x06;
else if (gadget_is_mq11xx(gadget))
return 0x07;
else if (gadget_is_omap(gadget))
return 0x08;
else if (gadget_is_lh7a40x(gadget))
return 0x09;
else if (gadget_is_n9604(gadget))
return 0x10;
else if (gadget_is_pxa27x(gadget))
return 0x11;
else if (gadget_is_s3c2410(gadget))
return 0x12;
else if (gadget_is_at91(gadget))
return 0x13;
else if (gadget_is_imx(gadget))
return 0x14;
return -ENOENT;
}