blob: 0f81fc0c2f7f5abfd07deb5017f5bc68bc965ca4 [file] [log] [blame]
/* linux/arch/arm/mach-s3c2410/mach-anubis.c
*
* Copyright (c) 2003-2005 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Modifications:
* 02-May-2005 BJD Copied from mach-bast.c
* 20-Sep-2005 BJD Added static to non-exported items
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/interrupt.h>
#include <linux/list.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/anubis-map.h>
#include <asm/arch/anubis-irq.h>
#include <asm/arch/anubis-cpld.h>
#include <asm/hardware.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <asm/arch/regs-serial.h>
#include <asm/arch/regs-gpio.h>
#include <asm/arch/regs-mem.h>
#include <asm/arch/regs-lcd.h>
#include <asm/arch/nand.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/nand_ecc.h>
#include <linux/mtd/partitions.h>
#include "clock.h"
#include "devs.h"
#include "cpu.h"
#define COPYRIGHT ", (c) 2005 Simtec Electronics"
static struct map_desc anubis_iodesc[] __initdata = {
/* ISA IO areas */
{
.virtual = (u32)S3C24XX_VA_ISA_BYTE,
.pfn = __phys_to_pfn(0x0),
.length = SZ_4M,
.type = MT_DEVICE
}, {
.virtual = (u32)S3C24XX_VA_ISA_WORD,
.pfn = __phys_to_pfn(0x0),
.length = SZ_4M, MT_DEVICE
},
/* we could possibly compress the next set down into a set of smaller tables
* pagetables, but that would mean using an L2 section, and it still means
* we cannot actually feed the same register to an LDR due to 16K spacing
*/
/* CPLD control registers */
{
.virtual = (u32)ANUBIS_VA_CTRL1,
.pfn = __phys_to_pfn(ANUBIS_PA_CTRL1),
.length = SZ_4K,
.type = MT_DEVICE
}, {
.virtual = (u32)ANUBIS_VA_CTRL2,
.pfn = __phys_to_pfn(ANUBIS_PA_CTRL2),
.length = SZ_4K,
.type =MT_DEVICE
},
/* IDE drives */
{
.virtual = (u32)ANUBIS_IDEPRI,
.pfn = __phys_to_pfn(S3C2410_CS3),
.length = SZ_1M,
.type = MT_DEVICE
}, {
.virtual = (u32)ANUBIS_IDEPRIAUX,
.pfn = __phys_to_pfn(S3C2410_CS3+(1<<26)),
.length = SZ_1M,
.type = MT_DEVICE
}, {
.virtual = (u32)ANUBIS_IDESEC,
.pfn = __phys_to_pfn(S3C2410_CS4),
.length = SZ_1M,
.type = MT_DEVICE
}, {
.virtual = (u32)ANUBIS_IDESECAUX,
.pfn = __phys_to_pfn(S3C2410_CS4+(1<<26)),
.length = SZ_1M,
.type = MT_DEVICE
},
};
#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK
#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
static struct s3c24xx_uart_clksrc anubis_serial_clocks[] = {
[0] = {
.name = "uclk",
.divisor = 1,
.min_baud = 0,
.max_baud = 0,
},
[1] = {
.name = "pclk",
.divisor = 1,
.min_baud = 0,
.max_baud = 0.
}
};
static struct s3c2410_uartcfg anubis_uartcfgs[] = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = anubis_serial_clocks,
.clocks_size = ARRAY_SIZE(anubis_serial_clocks)
},
[1] = {
.hwport = 2,
.flags = 0,
.ucon = UCON,
.ulcon = ULCON,
.ufcon = UFCON,
.clocks = anubis_serial_clocks,
.clocks_size = ARRAY_SIZE(anubis_serial_clocks)
},
};
/* NAND Flash on Anubis board */
static int external_map[] = { 2 };
static int chip0_map[] = { 0 };
static int chip1_map[] = { 1 };
static struct mtd_partition anubis_default_nand_part[] = {
[0] = {
.name = "Boot Agent",
.size = SZ_16K,
.offset = 0
},
[1] = {
.name = "/boot",
.size = SZ_4M - SZ_16K,
.offset = SZ_16K,
},
[2] = {
.name = "user1",
.offset = SZ_4M,
.size = SZ_32M - SZ_4M,
},
[3] = {
.name = "user2",
.offset = SZ_32M,
.size = MTDPART_SIZ_FULL,
}
};
/* the Anubis has 3 selectable slots for nand-flash, the two
* on-board chip areas, as well as the external slot.
*
* Note, there is no current hot-plug support for the External
* socket.
*/
static struct s3c2410_nand_set anubis_nand_sets[] = {
[1] = {
.name = "External",
.nr_chips = 1,
.nr_map = external_map,
.nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
.partitions = anubis_default_nand_part
},
[0] = {
.name = "chip0",
.nr_chips = 1,
.nr_map = chip0_map,
.nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
.partitions = anubis_default_nand_part
},
[2] = {
.name = "chip1",
.nr_chips = 1,
.nr_map = chip1_map,
.nr_partitions = ARRAY_SIZE(anubis_default_nand_part),
.partitions = anubis_default_nand_part
},
};
static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
{
unsigned int tmp;
slot = set->nr_map[slot] & 3;
pr_debug("anubis_nand: selecting slot %d (set %p,%p)\n",
slot, set, set->nr_map);
tmp = __raw_readb(ANUBIS_VA_CTRL1);
tmp &= ~ANUBIS_CTRL1_NANDSEL;
tmp |= slot;
pr_debug("anubis_nand: ctrl1 now %02x\n", tmp);
__raw_writeb(tmp, ANUBIS_VA_CTRL1);
}
static struct s3c2410_platform_nand anubis_nand_info = {
.tacls = 25,
.twrph0 = 80,
.twrph1 = 80,
.nr_sets = ARRAY_SIZE(anubis_nand_sets),
.sets = anubis_nand_sets,
.select_chip = anubis_nand_select,
};
/* Standard Anubis devices */
static struct platform_device *anubis_devices[] __initdata = {
&s3c_device_usb,
&s3c_device_wdt,
&s3c_device_adc,
&s3c_device_i2c,
&s3c_device_rtc,
&s3c_device_nand,
};
static struct clk *anubis_clocks[] = {
&s3c24xx_dclk0,
&s3c24xx_dclk1,
&s3c24xx_clkout0,
&s3c24xx_clkout1,
&s3c24xx_uclk,
};
static struct s3c24xx_board anubis_board __initdata = {
.devices = anubis_devices,
.devices_count = ARRAY_SIZE(anubis_devices),
.clocks = anubis_clocks,
.clocks_count = ARRAY_SIZE(anubis_clocks)
};
static void __init anubis_map_io(void)
{
/* initialise the clocks */
s3c24xx_dclk0.parent = NULL;
s3c24xx_dclk0.rate = 12*1000*1000;
s3c24xx_dclk1.parent = NULL;
s3c24xx_dclk1.rate = 24*1000*1000;
s3c24xx_clkout0.parent = &s3c24xx_dclk0;
s3c24xx_clkout1.parent = &s3c24xx_dclk1;
s3c24xx_uclk.parent = &s3c24xx_clkout1;
s3c_device_nand.dev.platform_data = &anubis_nand_info;
s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
s3c24xx_set_board(&anubis_board);
/* ensure that the GPIO is setup */
s3c2410_gpio_setpin(S3C2410_GPA0, 1);
}
MACHINE_START(ANUBIS, "Simtec-Anubis")
/* Maintainer: Ben Dooks <ben@simtec.co.uk> */
.phys_ram = S3C2410_SDRAM_PA,
.phys_io = S3C2410_PA_UART,
.io_pg_offst = (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
.boot_params = S3C2410_SDRAM_PA + 0x100,
.map_io = anubis_map_io,
.init_irq = s3c24xx_init_irq,
.timer = &s3c24xx_timer,
MACHINE_END