arch/um/kernel/main.c

/*
 * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com)
 * Licensed under the GPL
 */

#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <signal.h>
#include <errno.h>
#include <sys/resource.h>
#include <sys/mman.h>
#include <sys/user.h>
#include <asm/page.h>
#include "user_util.h"
#include "kern_util.h"
#include "mem_user.h"
#include "signal_user.h"
#include "time_user.h"
#include "irq_user.h"
#include "user.h"
#include "init.h"
#include "mode.h"
#include "choose-mode.h"
#include "uml-config.h"
#include "os.h"

/* Set in set_stklim, which is called from main and __wrap_malloc.
 * __wrap_malloc only calls it if main hasn't started.
 */
unsigned long stacksizelim;

/* Set in main */
char *linux_prog;

#define PGD_BOUND (4 * 1024 * 1024)
#define STACKSIZE (8 * 1024 * 1024)
#define THREAD_NAME_LEN (256)

static void set_stklim(void)
{
	struct rlimit lim;

	if(getrlimit(RLIMIT_STACK, &lim) < 0){
		perror("getrlimit");
		exit(1);
	}
	if((lim.rlim_cur == RLIM_INFINITY) || (lim.rlim_cur > STACKSIZE)){
		lim.rlim_cur = STACKSIZE;
		if(setrlimit(RLIMIT_STACK, &lim) < 0){
			perror("setrlimit");
			exit(1);
		}
	}
	stacksizelim = (lim.rlim_cur + PGD_BOUND - 1) & ~(PGD_BOUND - 1);
}

static __init void do_uml_initcalls(void)
{
	initcall_t *call;

	call = &__uml_initcall_start;
	while (call < &__uml_initcall_end){;
		(*call)();
		call++;
	}
}

static void last_ditch_exit(int sig)
{
	signal(SIGINT, SIG_DFL);
	signal(SIGTERM, SIG_DFL);
	signal(SIGHUP, SIG_DFL);
	uml_cleanup();
	exit(1);
}

extern int uml_exitcode;

extern void scan_elf_aux( char **envp);

int main(int argc, char **argv, char **envp)
{
	char **new_argv;
	sigset_t mask;
	int ret, i, err;

	/* Enable all signals except SIGIO - in some environments, we can
	 * enter with some signals blocked
	 */

	sigemptyset(&mask);
	sigaddset(&mask, SIGIO);
	if(sigprocmask(SIG_SETMASK, &mask, NULL) < 0){
		perror("sigprocmask");
		exit(1);
	}

#ifdef UML_CONFIG_CMDLINE_ON_HOST
	/* Allocate memory for thread command lines */
	if(argc < 2 || strlen(argv[1]) < THREAD_NAME_LEN - 1){

		char padding[THREAD_NAME_LEN] = {
			[ 0 ...  THREAD_NAME_LEN - 2] = ' ', '\0'
		};

		new_argv = malloc((argc + 2) * sizeof(char*));
		if(!new_argv) {
			perror("Allocating extended argv");
			exit(1);
		}

		new_argv[0] = argv[0];
		new_argv[1] = padding;

		for(i = 2; i <= argc; i++)
			new_argv[i] = argv[i - 1];
		new_argv[argc + 1] = NULL;

		execvp(new_argv[0], new_argv);
		perror("execing with extended args");
		exit(1);
	}
#endif

	linux_prog = argv[0];

	set_stklim();

	new_argv = malloc((argc + 1) * sizeof(char *));
	if(new_argv == NULL){
		perror("Mallocing argv");
		exit(1);
	}
	for(i=0;i<argc;i++){
		new_argv[i] = strdup(argv[i]);
		if(new_argv[i] == NULL){
			perror("Mallocing an arg");
			exit(1);
		}
	}
	new_argv[argc] = NULL;

	set_handler(SIGINT, last_ditch_exit, SA_ONESHOT | SA_NODEFER, -1);
	set_handler(SIGTERM, last_ditch_exit, SA_ONESHOT | SA_NODEFER, -1);
	set_handler(SIGHUP, last_ditch_exit, SA_ONESHOT | SA_NODEFER, -1);

	scan_elf_aux( envp);

	do_uml_initcalls();
	ret = linux_main(argc, argv);

	/* Disable SIGPROF - I have no idea why libc doesn't do this or turn
	 * off the profiling time, but UML dies with a SIGPROF just before
	 * exiting when profiling is active.
	 */
	change_sig(SIGPROF, 0);

        /* This signal stuff used to be in the reboot case.  However,
         * sometimes a SIGVTALRM can come in when we're halting (reproducably
         * when writing out gcov information, presumably because that takes
         * some time) and cause a segfault.
         */

        /* stop timers and set SIG*ALRM to be ignored */
        disable_timer();

        /* disable SIGIO for the fds and set SIGIO to be ignored */
        err = deactivate_all_fds();
        if(err)
                printf("deactivate_all_fds failed, errno = %d\n", -err);

        /* Let any pending signals fire now.  This ensures
         * that they won't be delivered after the exec, when
         * they are definitely not expected.
         */
        unblock_signals();

	/* Reboot */
	if(ret){
		printf("\n");
		execvp(new_argv[0], new_argv);
		perror("Failed to exec kernel");
		ret = 1;
	}
	printf("\n");
	return(uml_exitcode);
}

#define CAN_KMALLOC() \
	(kmalloc_ok && CHOOSE_MODE((os_getpid() != tracing_pid), 1))

extern void *__real_malloc(int);

void *__wrap_malloc(int size)
{
	void *ret;

	if(!CAN_KMALLOC())
		return(__real_malloc(size));
	else if(size <= PAGE_SIZE) /* finding contiguos pages can be hard*/
		ret = um_kmalloc(size);
	else ret = um_vmalloc(size);

	/* glibc people insist that if malloc fails, errno should be
	 * set by malloc as well. So we do.
	 */
	if(ret == NULL)
		errno = ENOMEM;

	return(ret);
}

void *__wrap_calloc(int n, int size)
{
	void *ptr = __wrap_malloc(n * size);

	if(ptr == NULL) return(NULL);
	memset(ptr, 0, n * size);
	return(ptr);
}

extern void __real_free(void *);

extern unsigned long high_physmem;

void __wrap_free(void *ptr)
{
	unsigned long addr = (unsigned long) ptr;

	/* We need to know how the allocation happened, so it can be correctly
	 * freed.  This is done by seeing what region of memory the pointer is
	 * in -
	 * 	physical memory - kmalloc/kfree
	 *	kernel virtual memory - vmalloc/vfree
	 * 	anywhere else - malloc/free
	 * If kmalloc is not yet possible, then either high_physmem and/or
	 * end_vm are still 0 (as at startup), in which case we call free, or
	 * we have set them, but anyway addr has not been allocated from those
	 * areas. So, in both cases __real_free is called.
	 *
	 * CAN_KMALLOC is checked because it would be bad to free a buffer
	 * with kmalloc/vmalloc after they have been turned off during
	 * shutdown.
	 * XXX: However, we sometimes shutdown CAN_KMALLOC temporarily, so
	 * there is a possibility for memory leaks.
	 */

	if((addr >= uml_physmem) && (addr < high_physmem)){
		if(CAN_KMALLOC())
			kfree(ptr);
	}
	else if((addr >= start_vm) && (addr < end_vm)){
		if(CAN_KMALLOC())
			vfree(ptr);
	}
	else __real_free(ptr);
}

/*
 * Overrides for Emacs so that we follow Linus's tabbing style.
 * Emacs will notice this stuff at the end of the file and automatically
 * adjust the settings for this buffer only.  This must remain at the end
 * of the file.
 * ---------------------------------------------------------------------------
 * Local variables:
 * c-file-style: "linux"
 * End:
 */