blob: 2a7fee2a7635109212810c0f5cbc5ca959f364b3 [file] [log] [blame]
/*
* linux/arch/arm/mm/mm-lusl7200.c
*
* Copyright (C) 2000 Steve Hill (sjhill@cotw.com)
*
* Extra MM routines for L7200 architecture
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/page.h>
#include <asm/mach/map.h>
#include <asm/arch/hardware.h>
/*
* IRQ base register
*/
#define IRQ_BASE (IO_BASE_2 + 0x1000)
/*
* Normal IRQ registers
*/
#define IRQ_STATUS (*(volatile unsigned long *) (IRQ_BASE + 0x000))
#define IRQ_RAWSTATUS (*(volatile unsigned long *) (IRQ_BASE + 0x004))
#define IRQ_ENABLE (*(volatile unsigned long *) (IRQ_BASE + 0x008))
#define IRQ_ENABLECLEAR (*(volatile unsigned long *) (IRQ_BASE + 0x00c))
#define IRQ_SOFT (*(volatile unsigned long *) (IRQ_BASE + 0x010))
#define IRQ_SOURCESEL (*(volatile unsigned long *) (IRQ_BASE + 0x018))
/*
* Fast IRQ registers
*/
#define FIQ_STATUS (*(volatile unsigned long *) (IRQ_BASE + 0x100))
#define FIQ_RAWSTATUS (*(volatile unsigned long *) (IRQ_BASE + 0x104))
#define FIQ_ENABLE (*(volatile unsigned long *) (IRQ_BASE + 0x108))
#define FIQ_ENABLECLEAR (*(volatile unsigned long *) (IRQ_BASE + 0x10c))
#define FIQ_SOFT (*(volatile unsigned long *) (IRQ_BASE + 0x110))
#define FIQ_SOURCESEL (*(volatile unsigned long *) (IRQ_BASE + 0x118))
static void l7200_mask_irq(unsigned int irq)
{
IRQ_ENABLECLEAR = 1 << irq;
}
static void l7200_unmask_irq(unsigned int irq)
{
IRQ_ENABLE = 1 << irq;
}
static void __init l7200_init_irq(void)
{
int irq;
IRQ_ENABLECLEAR = 0xffffffff; /* clear all interrupt enables */
FIQ_ENABLECLEAR = 0xffffffff; /* clear all fast interrupt enables */
for (irq = 0; irq < NR_IRQS; irq++) {
irq_desc[irq].valid = 1;
irq_desc[irq].probe_ok = 1;
irq_desc[irq].mask_ack = l7200_mask_irq;
irq_desc[irq].mask = l7200_mask_irq;
irq_desc[irq].unmask = l7200_unmask_irq;
}
init_FIQ();
}
static struct map_desc l7200_io_desc[] __initdata = {
{ IO_BASE, IO_START, IO_SIZE, MT_DEVICE },
{ IO_BASE_2, IO_START_2, IO_SIZE_2, MT_DEVICE },
{ AUX_BASE, AUX_START, AUX_SIZE, MT_DEVICE },
{ FLASH1_BASE, FLASH1_START, FLASH1_SIZE, MT_DEVICE },
{ FLASH2_BASE, FLASH2_START, FLASH2_SIZE, MT_DEVICE }
};
static void __init l7200_map_io(void)
{
iotable_init(l7200_io_desc, ARRAY_SIZE(l7200_io_desc));
}
MACHINE_START(L7200, "LinkUp Systems L7200")
/* Maintainer: Steve Hill / Scott McConnell */
.phys_ram = 0xf0000000,
.phys_io = 0x80040000,
.io_pg_offst = ((0xd0000000) >> 18) & 0xfffc,
.map_io = l7200_map_io,
.init_irq = l7200_init_irq,
MACHINE_END