blob: d8e3bb6feac85df763449d904e672686dae23352 [file] [log] [blame]
/*
* Industry-pack bus.
*
* (C) 2011 Samuel Iglesias Gonsalvez <siglesia@cern.ch>, CERN
* (C) 2012 Samuel Iglesias Gonsalvez <siglesias@igalia.com>, Igalia
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation; version 2 of the License.
*/
#include <linux/mod_devicetable.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include "ipack_ids.h"
#define IPACK_IDPROM_OFFSET_I 0x01
#define IPACK_IDPROM_OFFSET_P 0x03
#define IPACK_IDPROM_OFFSET_A 0x05
#define IPACK_IDPROM_OFFSET_C 0x07
#define IPACK_IDPROM_OFFSET_MANUFACTURER_ID 0x09
#define IPACK_IDPROM_OFFSET_MODEL 0x0B
#define IPACK_IDPROM_OFFSET_REVISION 0x0D
#define IPACK_IDPROM_OFFSET_RESERVED 0x0F
#define IPACK_IDPROM_OFFSET_DRIVER_ID_L 0x11
#define IPACK_IDPROM_OFFSET_DRIVER_ID_H 0x13
#define IPACK_IDPROM_OFFSET_NUM_BYTES 0x15
#define IPACK_IDPROM_OFFSET_CRC 0x17
struct ipack_bus_ops;
struct ipack_driver;
enum ipack_space {
IPACK_IO_SPACE = 0,
IPACK_ID_SPACE = 1,
IPACK_MEM_SPACE = 2,
IPACK_INT_SPACE,
};
/**
* struct ipack_addr_space - Virtual address space mapped for a specified type.
*
* @address: virtual address
* @size: size of the mapped space
*/
struct ipack_addr_space {
void __iomem *address;
unsigned int size;
};
/**
* struct ipack_device
*
* @bus_nr: IP bus number where the device is plugged
* @slot: Slot where the device is plugged in the carrier board
* @bus: ipack_bus_device where the device is plugged to.
* @id_space: Virtual address to ID space.
* @io_space: Virtual address to IO space.
* @mem_space: Virtual address to MEM space.
* @dev: device in kernel representation.
*
* Warning: Direct access to mapped memory is possible but the endianness
* is not the same with PCI carrier or VME carrier. The endianness is managed
* by the carrier board throught bus->ops.
*/
struct ipack_device {
unsigned int bus_nr;
unsigned int slot;
struct ipack_bus_device *bus;
struct ipack_addr_space id_space;
struct ipack_addr_space io_space;
struct ipack_addr_space int_space;
struct ipack_addr_space mem_space;
struct device dev;
u8 *id;
size_t id_avail;
u32 id_vendor;
u32 id_device;
u8 id_format;
unsigned int id_crc_correct:1;
unsigned int speed_8mhz:1;
unsigned int speed_32mhz:1;
};
/**
* struct ipack_driver_ops -- callbacks to mezzanine driver for installing/removing one device
*
* @probe: Probe function
* @remove: tell the driver that the carrier board wants to remove one device
*/
struct ipack_driver_ops {
int (*probe) (struct ipack_device *dev);
void (*remove) (struct ipack_device *dev);
};
/**
* struct ipack_driver -- Specific data to each ipack board driver
*
* @driver: Device driver kernel representation
* @ops: Mezzanine driver operations specific for the ipack bus.
*/
struct ipack_driver {
struct device_driver driver;
const struct ipack_device_id *id_table;
const struct ipack_driver_ops *ops;
};
/**
* struct ipack_bus_ops - available operations on a bridge module
*
* @map_space: map IP address space
* @unmap_space: unmap IP address space
* @request_irq: request IRQ
* @free_irq: free IRQ
* @get_clockrate: Returns the clockrate the carrier is currently
* communicating with the device at.
* @set_clockrate: Sets the clock-rate for carrier / module communication.
* Should return -EINVAL if the requested speed is not supported.
* @get_error: Returns the error state for the slot the device is attached
* to.
* @get_timeout: Returns 1 if the communication with the device has
* previously timed out.
* @reset_timeout: Resets the state returned by get_timeout.
*/
struct ipack_bus_ops {
int (*map_space) (struct ipack_device *dev, unsigned int memory_size, int space);
int (*unmap_space) (struct ipack_device *dev, int space);
int (*request_irq) (struct ipack_device *dev,
irqreturn_t (*handler)(void *), void *arg);
int (*free_irq) (struct ipack_device *dev);
int (*get_clockrate) (struct ipack_device *dev);
int (*set_clockrate) (struct ipack_device *dev, int mherz);
int (*get_error) (struct ipack_device *dev);
int (*get_timeout) (struct ipack_device *dev);
int (*reset_timeout) (struct ipack_device *dev);
};
/**
* struct ipack_bus_device
*
* @dev: pointer to carrier device
* @slots: number of slots available
* @bus_nr: ipack bus number
* @ops: bus operations for the mezzanine drivers
*/
struct ipack_bus_device {
struct device *parent;
int slots;
int bus_nr;
const struct ipack_bus_ops *ops;
};
/**
* ipack_bus_register -- register a new ipack bus
*
* @parent: pointer to the parent device, if any.
* @slots: number of slots available in the bus device.
* @ops: bus operations for the mezzanine drivers.
*
* The carrier board device should call this function to register itself as
* available bus device in ipack.
*/
struct ipack_bus_device *ipack_bus_register(struct device *parent, int slots,
const struct ipack_bus_ops *ops);
/**
* ipack_bus_unregister -- unregister an ipack bus
*/
int ipack_bus_unregister(struct ipack_bus_device *bus);
/**
* ipack_driver_register -- Register a new driver
*
* Called by a ipack driver to register itself as a driver
* that can manage ipack devices.
*/
int ipack_driver_register(struct ipack_driver *edrv, struct module *owner,
const char *name);
void ipack_driver_unregister(struct ipack_driver *edrv);
/**
* ipack_device_register -- register a new mezzanine device
*
* @bus: ipack bus device it is plugged to.
* @slot: slot position in the bus device.
*
* Register a new ipack device (mezzanine device). The call is done by
* the carrier device driver.
*/
struct ipack_device *ipack_device_register(struct ipack_bus_device *bus, int slot);
void ipack_device_unregister(struct ipack_device *dev);
/**
* DEFINE_IPACK_DEVICE_TABLE - macro used to describe a IndustryPack table
* @_table: device table name
*
* This macro is used to create a struct ipack_device_id array (a device table)
* in a generic manner.
*/
#define DEFINE_IPACK_DEVICE_TABLE(_table) \
const struct ipack_device_id _table[] __devinitconst
/**
* IPACK_DEVICE - macro used to describe a specific IndustryPack device
* @_format: the format version (currently either 1 or 2, 8 bit value)
* @vend: the 8 or 24 bit IndustryPack Vendor ID
* @dev: the 8 or 16 bit IndustryPack Device ID
*
* This macro is used to create a struct ipack_device_id that matches a specific
* device.
*/
#define IPACK_DEVICE(_format, vend, dev) \
.format = (_format), \
.vendor = (vend), \
.device = (dev)