blob: b414d2b401f600dabb66ca332df015650bc448f4 [file] [log] [blame]
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* SGI UV Broadcast Assist Unit definitions
*
* Copyright (C) 2008 Silicon Graphics, Inc. All rights reserved.
*/
#ifndef _ASM_X86_UV_UV_BAU_H
#define _ASM_X86_UV_UV_BAU_H
#include <linux/bitmap.h>
#define BITSPERBYTE 8
/*
* Broadcast Assist Unit messaging structures
*
* Selective Broadcast activations are induced by software action
* specifying a particular 8-descriptor "set" via a 6-bit index written
* to an MMR.
* Thus there are 64 unique 512-byte sets of SB descriptors - one set for
* each 6-bit index value. These descriptor sets are mapped in sequence
* starting with set 0 located at the address specified in the
* BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512,
* set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on.
*
* We will use 31 sets, one for sending BAU messages from each of the 32
* cpu's on the node.
*
* TLB shootdown will use the first of the 8 descriptors of each set.
* Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
*/
#define UV_ITEMS_PER_DESCRIPTOR 8
#define UV_CPUS_PER_ACT_STATUS 32
#define UV_ACT_STATUS_MASK 0x3
#define UV_ACT_STATUS_SIZE 2
#define UV_ADP_SIZE 32
#define UV_DISTRIBUTION_SIZE 256
#define UV_SW_ACK_NPENDING 8
#define UV_NET_ENDPOINT_INTD 0x38
#define UV_DESC_BASE_PNODE_SHIFT 49
#define UV_PAYLOADQ_PNODE_SHIFT 49
#define UV_PTC_BASENAME "sgi_uv/ptc_statistics"
#define uv_physnodeaddr(x) ((__pa((unsigned long)(x)) & uv_mmask))
/*
* bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
*/
#define DESC_STATUS_IDLE 0
#define DESC_STATUS_ACTIVE 1
#define DESC_STATUS_DESTINATION_TIMEOUT 2
#define DESC_STATUS_SOURCE_TIMEOUT 3
/*
* source side thresholds at which message retries print a warning
*/
#define SOURCE_TIMEOUT_LIMIT 20
#define DESTINATION_TIMEOUT_LIMIT 20
/*
* number of entries in the destination side payload queue
*/
#define DEST_Q_SIZE 17
/*
* number of destination side software ack resources
*/
#define DEST_NUM_RESOURCES 8
#define MAX_CPUS_PER_NODE 32
/*
* completion statuses for sending a TLB flush message
*/
#define FLUSH_RETRY 1
#define FLUSH_GIVEUP 2
#define FLUSH_COMPLETE 3
/*
* Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
* If the 'multilevel' flag in the header portion of the descriptor
* has been set to 0, then endpoint multi-unicast mode is selected.
* The distribution specification (32 bytes) is interpreted as a 256-bit
* distribution vector. Adjacent bits correspond to consecutive even numbered
* nodeIDs. The result of adding the index of a given bit to the 15-bit
* 'base_dest_nodeid' field of the header corresponds to the
* destination nodeID associated with that specified bit.
*/
struct bau_target_nodemask {
unsigned long bits[BITS_TO_LONGS(256)];
};
/*
* mask of cpu's on a node
* (during initialization we need to check that unsigned long has
* enough bits for max. cpu's per node)
*/
struct bau_local_cpumask {
unsigned long bits;
};
/*
* Payload: 16 bytes (128 bits) (bytes 0x20-0x2f of descriptor)
* only 12 bytes (96 bits) of the payload area are usable.
* An additional 3 bytes (bits 27:4) of the header address are carried
* to the next bytes of the destination payload queue.
* And an additional 2 bytes of the header Suppl_A field are also
* carried to the destination payload queue.
* But the first byte of the Suppl_A becomes bits 127:120 (the 16th byte)
* of the destination payload queue, which is written by the hardware
* with the s/w ack resource bit vector.
* [ effective message contents (16 bytes (128 bits) maximum), not counting
* the s/w ack bit vector ]
*/
/*
* The payload is software-defined for INTD transactions
*/
struct bau_msg_payload {
unsigned long address; /* signifies a page or all TLB's
of the cpu */
/* 64 bits */
unsigned short sending_cpu; /* filled in by sender */
/* 16 bits */
unsigned short acknowledge_count;/* filled in by destination */
/* 16 bits */
unsigned int reserved1:32; /* not usable */
};
/*
* Message header: 16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
* see table 4.2.3.0.1 in broacast_assist spec.
*/
struct bau_msg_header {
unsigned int dest_subnodeid:6; /* must be 0x10, for the LB */
/* bits 5:0 */
unsigned int base_dest_nodeid:15; /* nasid>>1 (pnode) of */
/* bits 20:6 */ /* first bit in node_map */
unsigned int command:8; /* message type */
/* bits 28:21 */
/* 0x38: SN3net EndPoint Message */
unsigned int rsvd_1:3; /* must be zero */
/* bits 31:29 */
/* int will align on 32 bits */
unsigned int rsvd_2:9; /* must be zero */
/* bits 40:32 */
/* Suppl_A is 56-41 */
unsigned int payload_2a:8;/* becomes byte 16 of msg */
/* bits 48:41 */ /* not currently using */
unsigned int payload_2b:8;/* becomes byte 17 of msg */
/* bits 56:49 */ /* not currently using */
/* Address field (96:57) is never used as an
address (these are address bits 42:3) */
unsigned int rsvd_3:1; /* must be zero */
/* bit 57 */
/* address bits 27:4 are payload */
/* these 24 bits become bytes 12-14 of msg */
unsigned int replied_to:1;/* sent as 0 by the source to byte 12 */
/* bit 58 */
unsigned int payload_1a:5;/* not currently used */
/* bits 63:59 */
unsigned int payload_1b:8;/* not currently used */
/* bits 71:64 */
unsigned int payload_1c:8;/* not currently used */
/* bits 79:72 */
unsigned int payload_1d:2;/* not currently used */
/* bits 81:80 */
unsigned int rsvd_4:7; /* must be zero */
/* bits 88:82 */
unsigned int sw_ack_flag:1;/* software acknowledge flag */
/* bit 89 */
/* INTD trasactions at destination are to
wait for software acknowledge */
unsigned int rsvd_5:6; /* must be zero */
/* bits 95:90 */
unsigned int rsvd_6:5; /* must be zero */
/* bits 100:96 */
unsigned int int_both:1;/* if 1, interrupt both sockets on the blade */
/* bit 101*/
unsigned int fairness:3;/* usually zero */
/* bits 104:102 */
unsigned int multilevel:1; /* multi-level multicast format */
/* bit 105 */
/* 0 for TLB: endpoint multi-unicast messages */
unsigned int chaining:1;/* next descriptor is part of this activation*/
/* bit 106 */
unsigned int rsvd_7:21; /* must be zero */
/* bits 127:107 */
};
/*
* The activation descriptor:
* The format of the message to send, plus all accompanying control
* Should be 64 bytes
*/
struct bau_desc {
struct bau_target_nodemask distribution;
/*
* message template, consisting of header and payload:
*/
struct bau_msg_header header;
struct bau_msg_payload payload;
};
/*
* -payload-- ---------header------
* bytes 0-11 bits 41-56 bits 58-81
* A B (2) C (3)
*
* A/B/C are moved to:
* A C B
* bytes 0-11 bytes 12-14 bytes 16-17 (byte 15 filled in by hw as vector)
* ------------payload queue-----------
*/
/*
* The payload queue on the destination side is an array of these.
* With BAU_MISC_CONTROL set for software acknowledge mode, the messages
* are 32 bytes (2 micropackets) (256 bits) in length, but contain only 17
* bytes of usable data, including the sw ack vector in byte 15 (bits 127:120)
* (12 bytes come from bau_msg_payload, 3 from payload_1, 2 from
* sw_ack_vector and payload_2)
* "Enabling Software Acknowledgment mode (see Section 4.3.3 Software
* Acknowledge Processing) also selects 32 byte (17 bytes usable) payload
* operation."
*/
struct bau_payload_queue_entry {
unsigned long address; /* signifies a page or all TLB's
of the cpu */
/* 64 bits, bytes 0-7 */
unsigned short sending_cpu; /* cpu that sent the message */
/* 16 bits, bytes 8-9 */
unsigned short acknowledge_count; /* filled in by destination */
/* 16 bits, bytes 10-11 */
unsigned short replied_to:1; /* sent as 0 by the source */
/* 1 bit */
unsigned short unused1:7; /* not currently using */
/* 7 bits: byte 12) */
unsigned char unused2[2]; /* not currently using */
/* bytes 13-14 */
unsigned char sw_ack_vector; /* filled in by the hardware */
/* byte 15 (bits 127:120) */
unsigned char unused4[3]; /* not currently using bytes 17-19 */
/* bytes 17-19 */
int number_of_cpus; /* filled in at destination */
/* 32 bits, bytes 20-23 (aligned) */
unsigned char unused5[8]; /* not using */
/* bytes 24-31 */
};
/*
* one for every slot in the destination payload queue
*/
struct bau_msg_status {
struct bau_local_cpumask seen_by; /* map of cpu's */
};
/*
* one for every slot in the destination software ack resources
*/
struct bau_sw_ack_status {
struct bau_payload_queue_entry *msg; /* associated message */
int watcher; /* cpu monitoring, or -1 */
};
/*
* one on every node and per-cpu; to locate the software tables
*/
struct bau_control {
struct bau_desc *descriptor_base;
struct bau_payload_queue_entry *bau_msg_head;
struct bau_payload_queue_entry *va_queue_first;
struct bau_payload_queue_entry *va_queue_last;
struct bau_msg_status *msg_statuses;
int *watching; /* pointer to array */
};
/*
* This structure is allocated per_cpu for UV TLB shootdown statistics.
*/
struct ptc_stats {
unsigned long ptc_i; /* number of IPI-style flushes */
unsigned long requestor; /* number of nodes this cpu sent to */
unsigned long requestee; /* times cpu was remotely requested */
unsigned long alltlb; /* times all tlb's on this cpu were flushed */
unsigned long onetlb; /* times just one tlb on this cpu was flushed */
unsigned long s_retry; /* retries on source side timeouts */
unsigned long d_retry; /* retries on destination side timeouts */
unsigned long sflush; /* cycles spent in uv_flush_tlb_others */
unsigned long dflush; /* cycles spent on destination side */
unsigned long retriesok; /* successes on retries */
unsigned long nomsg; /* interrupts with no message */
unsigned long multmsg; /* interrupts with multiple messages */
unsigned long ntargeted;/* nodes targeted */
};
static inline int bau_node_isset(int node, struct bau_target_nodemask *dstp)
{
return constant_test_bit(node, &dstp->bits[0]);
}
static inline void bau_node_set(int node, struct bau_target_nodemask *dstp)
{
__set_bit(node, &dstp->bits[0]);
}
static inline void bau_nodes_clear(struct bau_target_nodemask *dstp, int nbits)
{
bitmap_zero(&dstp->bits[0], nbits);
}
static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
{
bitmap_zero(&dstp->bits, nbits);
}
#define cpubit_isset(cpu, bau_local_cpumask) \
test_bit((cpu), (bau_local_cpumask).bits)
extern void uv_bau_message_intr1(void);
extern void uv_bau_timeout_intr1(void);
#endif /* _ASM_X86_UV_UV_BAU_H */