blob: a3008b904f7ddc02395c33f2bf53a52f4b5ac4df [file] [log] [blame]
/*
* Intel Wireless WiMAX Connection 2400m
* SDIO RX handling
*
*
* Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*
* Intel Corporation <linux-wimax@intel.com>
* Dirk Brandewie <dirk.j.brandewie@intel.com>
* - Initial implementation
*
*
* This handles the RX path on SDIO.
*
* The SDIO bus driver calls the "irq" routine when data is available.
* This is not a traditional interrupt routine since the SDIO bus
* driver calls us from its irq thread context. Because of this
* sleeping in the SDIO RX IRQ routine is okay.
*
* From there on, we obtain the size of the data that is available,
* allocate an skb, copy it and then pass it to the generic driver's
* RX routine [i2400m_rx()].
*
* ROADMAP
*
* i2400ms_irq()
* i2400ms_rx()
* __i2400ms_rx_get_size()
* i2400m_rx()
*
* i2400ms_rx_setup()
*
* i2400ms_rx_release()
*/
#include <linux/workqueue.h>
#include <linux/wait.h>
#include <linux/skbuff.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/sdio_func.h>
#include "i2400m-sdio.h"
#define D_SUBMODULE rx
#include "sdio-debug-levels.h"
/*
* Read and return the amount of bytes available for RX
*
* The RX size has to be read like this: byte reads of three
* sequential locations; then glue'em together.
*
* sdio_readl() doesn't work.
*/
ssize_t __i2400ms_rx_get_size(struct i2400ms *i2400ms)
{
int ret, cnt, val;
ssize_t rx_size;
unsigned xfer_size_addr;
struct sdio_func *func = i2400ms->func;
struct device *dev = &i2400ms->func->dev;
d_fnstart(7, dev, "(i2400ms %p)\n", i2400ms);
xfer_size_addr = I2400MS_INTR_GET_SIZE_ADDR;
rx_size = 0;
for (cnt = 0; cnt < 3; cnt++) {
val = sdio_readb(func, xfer_size_addr + cnt, &ret);
if (ret < 0) {
dev_err(dev, "RX: Can't read byte %d of RX size from "
"0x%08x: %d\n", cnt, xfer_size_addr + cnt, ret);
rx_size = ret;
goto error_read;
}
rx_size = rx_size << 8 | (val & 0xff);
}
d_printf(6, dev, "RX: rx_size is %ld\n", (long) rx_size);
error_read:
d_fnend(7, dev, "(i2400ms %p) = %ld\n", i2400ms, (long) rx_size);
return rx_size;
}
/*
* Read data from the device (when in normal)
*
* Allocate an SKB of the right size, read the data in and then
* deliver it to the generic layer.
*
* We also check for a reboot barker. That means the device died and
* we have to reboot it.
*/
static
void i2400ms_rx(struct i2400ms *i2400ms)
{
int ret;
struct sdio_func *func = i2400ms->func;
struct device *dev = &func->dev;
struct i2400m *i2400m = &i2400ms->i2400m;
struct sk_buff *skb;
ssize_t rx_size;
d_fnstart(7, dev, "(i2400ms %p)\n", i2400ms);
rx_size = __i2400ms_rx_get_size(i2400ms);
if (rx_size < 0) {
ret = rx_size;
goto error_get_size;
}
ret = -ENOMEM;
skb = alloc_skb(rx_size, GFP_ATOMIC);
if (NULL == skb) {
dev_err(dev, "RX: unable to alloc skb\n");
goto error_alloc_skb;
}
ret = sdio_memcpy_fromio(func, skb->data,
I2400MS_DATA_ADDR, rx_size);
if (ret < 0) {
dev_err(dev, "RX: SDIO data read failed: %d\n", ret);
goto error_memcpy_fromio;
}
/* Check if device has reset */
if (!memcmp(skb->data, i2400m_NBOOT_BARKER,
sizeof(i2400m_NBOOT_BARKER))
|| !memcmp(skb->data, i2400m_SBOOT_BARKER,
sizeof(i2400m_SBOOT_BARKER))) {
ret = i2400m_dev_reset_handle(i2400m);
kfree_skb(skb);
} else {
skb_put(skb, rx_size);
i2400m_rx(i2400m, skb);
}
d_fnend(7, dev, "(i2400ms %p) = void\n", i2400ms);
return;
error_memcpy_fromio:
kfree_skb(skb);
error_alloc_skb:
error_get_size:
d_fnend(7, dev, "(i2400ms %p) = %d\n", i2400ms, ret);
return;
}
/*
* Process an interrupt from the SDIO card
*
* FIXME: need to process other events that are not just ready-to-read
*
* Checks there is data ready and then proceeds to read it.
*/
static
void i2400ms_irq(struct sdio_func *func)
{
int ret;
struct i2400ms *i2400ms = sdio_get_drvdata(func);
struct i2400m *i2400m = &i2400ms->i2400m;
struct device *dev = &func->dev;
int val;
d_fnstart(6, dev, "(i2400ms %p)\n", i2400ms);
val = sdio_readb(func, I2400MS_INTR_STATUS_ADDR, &ret);
if (ret < 0) {
dev_err(dev, "RX: Can't read interrupt status: %d\n", ret);
goto error_no_irq;
}
if (!val) {
dev_err(dev, "RX: BUG? got IRQ but no interrupt ready?\n");
goto error_no_irq;
}
sdio_writeb(func, 1, I2400MS_INTR_CLEAR_ADDR, &ret);
if (WARN_ON(i2400m->boot_mode != 0))
dev_err(dev, "RX: SW BUG? boot mode and IRQ is up?\n");
else
i2400ms_rx(i2400ms);
error_no_irq:
d_fnend(6, dev, "(i2400ms %p) = void\n", i2400ms);
return;
}
/*
* Setup SDIO RX
*
* Hooks up the IRQ handler and then enables IRQs.
*/
int i2400ms_rx_setup(struct i2400ms *i2400ms)
{
int result;
struct sdio_func *func = i2400ms->func;
struct device *dev = &func->dev;
d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
sdio_claim_host(func);
result = sdio_claim_irq(func, i2400ms_irq);
if (result < 0) {
dev_err(dev, "Cannot claim IRQ: %d\n", result);
goto error_irq_claim;
}
result = 0;
sdio_writeb(func, 1, I2400MS_INTR_ENABLE_ADDR, &result);
if (result < 0) {
sdio_release_irq(func);
dev_err(dev, "Failed to enable interrupts %d\n", result);
}
error_irq_claim:
sdio_release_host(func);
d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result);
return result;
}
/*
* Tear down SDIO RX
*
* Disables IRQs in the device and removes the IRQ handler.
*/
void i2400ms_rx_release(struct i2400ms *i2400ms)
{
int result;
struct sdio_func *func = i2400ms->func;
struct device *dev = &func->dev;
d_fnstart(5, dev, "(i2400ms %p)\n", i2400ms);
sdio_claim_host(func);
sdio_writeb(func, 0, I2400MS_INTR_ENABLE_ADDR, &result);
sdio_release_irq(func);
sdio_release_host(func);
d_fnend(5, dev, "(i2400ms %p) = %d\n", i2400ms, result);
}