blob: 28b8a571a91a4ff60f133b5de4ed127684d5d78c [file] [log] [blame]
/* linux/drivers/mtd/maps/scx200_docflash.c
Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com>
$Id: scx200_docflash.c,v 1.12 2005/11/07 11:14:28 gleixner Exp $
National Semiconductor SCx200 flash mapped with DOCCS
*/
#include <linux/module.h>
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/io.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <linux/mtd/partitions.h>
#include <linux/pci.h>
#include <linux/scx200.h>
#define NAME "scx200_docflash"
MODULE_AUTHOR("Christer Weinigel <wingel@hack.org>");
MODULE_DESCRIPTION("NatSemi SCx200 DOCCS Flash Driver");
MODULE_LICENSE("GPL");
static int probe = 0; /* Don't autoprobe */
static unsigned size = 0x1000000; /* 16 MiB the whole ISA address space */
static unsigned width = 8; /* Default to 8 bits wide */
static char *flashtype = "cfi_probe";
module_param(probe, int, 0);
MODULE_PARM_DESC(probe, "Probe for a BIOS mapping");
module_param(size, int, 0);
MODULE_PARM_DESC(size, "Size of the flash mapping");
module_param(width, int, 0);
MODULE_PARM_DESC(width, "Data width of the flash mapping (8/16)");
module_param(flashtype, charp, 0);
MODULE_PARM_DESC(flashtype, "Type of MTD probe to do");
static struct resource docmem = {
.flags = IORESOURCE_MEM,
.name = "NatSemi SCx200 DOCCS Flash",
};
static struct mtd_info *mymtd;
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition partition_info[] = {
{
.name = "DOCCS Boot kernel",
.offset = 0,
.size = 0xc0000
},
{
.name = "DOCCS Low BIOS",
.offset = 0xc0000,
.size = 0x40000
},
{
.name = "DOCCS File system",
.offset = 0x100000,
.size = ~0 /* calculate from flash size */
},
{
.name = "DOCCS High BIOS",
.offset = ~0, /* calculate from flash size */
.size = 0x80000
},
};
#define NUM_PARTITIONS ARRAY_SIZE(partition_info)
#endif
static struct map_info scx200_docflash_map = {
.name = "NatSemi SCx200 DOCCS Flash",
};
static int __init init_scx200_docflash(void)
{
unsigned u;
unsigned base;
unsigned ctrl;
unsigned pmr;
struct pci_dev *bridge;
printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n");
if ((bridge = pci_find_device(PCI_VENDOR_ID_NS,
PCI_DEVICE_ID_NS_SCx200_BRIDGE,
NULL)) == NULL)
return -ENODEV;
/* check that we have found the configuration block */
if (!scx200_cb_present())
return -ENODEV;
if (probe) {
/* Try to use the present flash mapping if any */
pci_read_config_dword(bridge, SCx200_DOCCS_BASE, &base);
pci_read_config_dword(bridge, SCx200_DOCCS_CTRL, &ctrl);
pmr = inl(scx200_cb_base + SCx200_PMR);
if (base == 0
|| (ctrl & 0x07000000) != 0x07000000
|| (ctrl & 0x0007ffff) == 0)
return -ENODEV;
size = ((ctrl&0x1fff)<<13) + (1<<13);
for (u = size; u > 1; u >>= 1)
;
if (u != 1)
return -ENODEV;
if (pmr & (1<<6))
width = 16;
else
width = 8;
docmem.start = base;
docmem.end = base + size;
if (request_resource(&iomem_resource, &docmem)) {
printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
return -ENOMEM;
}
} else {
for (u = size; u > 1; u >>= 1)
;
if (u != 1) {
printk(KERN_ERR NAME ": invalid size for flash mapping\n");
return -EINVAL;
}
if (width != 8 && width != 16) {
printk(KERN_ERR NAME ": invalid bus width for flash mapping\n");
return -EINVAL;
}
if (allocate_resource(&iomem_resource, &docmem,
size,
0xc0000000, 0xffffffff,
size, NULL, NULL)) {
printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
return -ENOMEM;
}
ctrl = 0x07000000 | ((size-1) >> 13);
printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl);
pci_write_config_dword(bridge, SCx200_DOCCS_BASE, docmem.start);
pci_write_config_dword(bridge, SCx200_DOCCS_CTRL, ctrl);
pmr = inl(scx200_cb_base + SCx200_PMR);
if (width == 8) {
pmr &= ~(1<<6);
} else {
pmr |= (1<<6);
}
outl(pmr, scx200_cb_base + SCx200_PMR);
}
printk(KERN_INFO NAME ": DOCCS mapped at 0x%lx-0x%lx, width %d\n",
docmem.start, docmem.end, width);
scx200_docflash_map.size = size;
if (width == 8)
scx200_docflash_map.bankwidth = 1;
else
scx200_docflash_map.bankwidth = 2;
simple_map_init(&scx200_docflash_map);
scx200_docflash_map.phys = docmem.start;
scx200_docflash_map.virt = ioremap(docmem.start, scx200_docflash_map.size);
if (!scx200_docflash_map.virt) {
printk(KERN_ERR NAME ": failed to ioremap the flash\n");
release_resource(&docmem);
return -EIO;
}
mymtd = do_map_probe(flashtype, &scx200_docflash_map);
if (!mymtd) {
printk(KERN_ERR NAME ": unable to detect flash\n");
iounmap(scx200_docflash_map.virt);
release_resource(&docmem);
return -ENXIO;
}
if (size < mymtd->size)
printk(KERN_WARNING NAME ": warning, flash mapping is smaller than flash size\n");
mymtd->owner = THIS_MODULE;
#ifdef CONFIG_MTD_PARTITIONS
partition_info[3].offset = mymtd->size-partition_info[3].size;
partition_info[2].size = partition_info[3].offset-partition_info[2].offset;
add_mtd_partitions(mymtd, partition_info, NUM_PARTITIONS);
#else
add_mtd_device(mymtd);
#endif
return 0;
}
static void __exit cleanup_scx200_docflash(void)
{
if (mymtd) {
#ifdef CONFIG_MTD_PARTITIONS
del_mtd_partitions(mymtd);
#else
del_mtd_device(mymtd);
#endif
map_destroy(mymtd);
}
if (scx200_docflash_map.virt) {
iounmap(scx200_docflash_map.virt);
release_resource(&docmem);
}
}
module_init(init_scx200_docflash);
module_exit(cleanup_scx200_docflash);
/*
Local variables:
compile-command: "make -k -C ../../.. SUBDIRS=drivers/mtd/maps modules"
c-basic-offset: 8
End:
*/