| /* |
| * OMAP OTG controller driver |
| * |
| * Based on code from tahvo-usb.c and isp1301_omap.c drivers. |
| * |
| * Copyright (C) 2005-2006 Nokia Corporation |
| * Copyright (C) 2004 Texas Instruments |
| * Copyright (C) 2004 David Brownell |
| * |
| * This file is subject to the terms and conditions of the GNU General |
| * Public License. See the file "COPYING" in the main directory of this |
| * archive for more details. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/io.h> |
| #include <linux/err.h> |
| #include <linux/extcon.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/platform_device.h> |
| #include <linux/platform_data/usb-omap1.h> |
| |
| struct otg_device { |
| void __iomem *base; |
| bool id; |
| bool vbus; |
| struct extcon_specific_cable_nb vbus_dev; |
| struct extcon_specific_cable_nb id_dev; |
| struct notifier_block vbus_nb; |
| struct notifier_block id_nb; |
| }; |
| |
| #define OMAP_OTG_CTRL 0x0c |
| #define OMAP_OTG_ASESSVLD (1 << 20) |
| #define OMAP_OTG_BSESSEND (1 << 19) |
| #define OMAP_OTG_BSESSVLD (1 << 18) |
| #define OMAP_OTG_VBUSVLD (1 << 17) |
| #define OMAP_OTG_ID (1 << 16) |
| #define OMAP_OTG_XCEIV_OUTPUTS \ |
| (OMAP_OTG_ASESSVLD | OMAP_OTG_BSESSEND | OMAP_OTG_BSESSVLD | \ |
| OMAP_OTG_VBUSVLD | OMAP_OTG_ID) |
| |
| static void omap_otg_ctrl(struct otg_device *otg_dev, u32 outputs) |
| { |
| u32 l; |
| |
| l = readl(otg_dev->base + OMAP_OTG_CTRL); |
| l &= ~OMAP_OTG_XCEIV_OUTPUTS; |
| l |= outputs; |
| writel(l, otg_dev->base + OMAP_OTG_CTRL); |
| } |
| |
| static void omap_otg_set_mode(struct otg_device *otg_dev) |
| { |
| if (!otg_dev->id && otg_dev->vbus) |
| /* Set B-session valid. */ |
| omap_otg_ctrl(otg_dev, OMAP_OTG_ID | OMAP_OTG_BSESSVLD); |
| else if (otg_dev->vbus) |
| /* Set A-session valid. */ |
| omap_otg_ctrl(otg_dev, OMAP_OTG_ASESSVLD); |
| else if (!otg_dev->id) |
| /* Set B-session end to indicate no VBUS. */ |
| omap_otg_ctrl(otg_dev, OMAP_OTG_ID | OMAP_OTG_BSESSEND); |
| } |
| |
| static int omap_otg_id_notifier(struct notifier_block *nb, |
| unsigned long event, void *ptr) |
| { |
| struct otg_device *otg_dev = container_of(nb, struct otg_device, id_nb); |
| |
| otg_dev->id = event; |
| omap_otg_set_mode(otg_dev); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int omap_otg_vbus_notifier(struct notifier_block *nb, |
| unsigned long event, void *ptr) |
| { |
| struct otg_device *otg_dev = container_of(nb, struct otg_device, |
| vbus_nb); |
| |
| otg_dev->vbus = event; |
| omap_otg_set_mode(otg_dev); |
| |
| return NOTIFY_DONE; |
| } |
| |
| static int omap_otg_probe(struct platform_device *pdev) |
| { |
| const struct omap_usb_config *config = pdev->dev.platform_data; |
| struct otg_device *otg_dev; |
| struct extcon_dev *extcon; |
| int ret; |
| u32 rev; |
| |
| if (!config || !config->extcon) |
| return -ENODEV; |
| |
| extcon = extcon_get_extcon_dev(config->extcon); |
| if (!extcon) |
| return -EPROBE_DEFER; |
| |
| otg_dev = devm_kzalloc(&pdev->dev, sizeof(*otg_dev), GFP_KERNEL); |
| if (!otg_dev) |
| return -ENOMEM; |
| |
| otg_dev->base = devm_ioremap_resource(&pdev->dev, &pdev->resource[0]); |
| if (IS_ERR(otg_dev->base)) |
| return PTR_ERR(otg_dev->base); |
| |
| otg_dev->id_nb.notifier_call = omap_otg_id_notifier; |
| otg_dev->vbus_nb.notifier_call = omap_otg_vbus_notifier; |
| |
| ret = extcon_register_interest(&otg_dev->id_dev, config->extcon, |
| "USB-HOST", &otg_dev->id_nb); |
| if (ret) |
| return ret; |
| |
| ret = extcon_register_interest(&otg_dev->vbus_dev, config->extcon, |
| "USB", &otg_dev->vbus_nb); |
| if (ret) { |
| extcon_unregister_interest(&otg_dev->id_dev); |
| return ret; |
| } |
| |
| otg_dev->id = extcon_get_cable_state(extcon, "USB-HOST"); |
| otg_dev->vbus = extcon_get_cable_state(extcon, "USB"); |
| omap_otg_set_mode(otg_dev); |
| |
| rev = readl(otg_dev->base); |
| |
| dev_info(&pdev->dev, |
| "OMAP USB OTG controller rev %d.%d (%s, id=%d, vbus=%d)\n", |
| (rev >> 4) & 0xf, rev & 0xf, config->extcon, otg_dev->id, |
| otg_dev->vbus); |
| |
| return 0; |
| } |
| |
| static int omap_otg_remove(struct platform_device *pdev) |
| { |
| struct otg_device *otg_dev = platform_get_drvdata(pdev); |
| |
| extcon_unregister_interest(&otg_dev->id_dev); |
| extcon_unregister_interest(&otg_dev->vbus_dev); |
| |
| return 0; |
| } |
| |
| static struct platform_driver omap_otg_driver = { |
| .probe = omap_otg_probe, |
| .remove = omap_otg_remove, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "omap_otg", |
| }, |
| }; |
| module_platform_driver(omap_otg_driver); |
| |
| MODULE_DESCRIPTION("OMAP USB OTG controller driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>"); |