| /* |
| * Gemini gpiochip and interrupt routines |
| * |
| * Copyright (C) 2008-2009 Paulius Zaleckas <paulius.zaleckas@teltonika.lt> |
| * |
| * Based on plat-mxc/gpio.c: |
| * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> |
| * Copyright 2008 Juergen Beisert, kernel@pengutronix.de |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/irq.h> |
| #include <linux/gpio.h> |
| |
| #include <mach/hardware.h> |
| #include <mach/irqs.h> |
| |
| #define GPIO_BASE(x) IO_ADDRESS(GEMINI_GPIO_BASE(x)) |
| #define irq_to_gpio(x) ((x) - GPIO_IRQ_BASE) |
| |
| /* GPIO registers definition */ |
| #define GPIO_DATA_OUT 0x0 |
| #define GPIO_DATA_IN 0x4 |
| #define GPIO_DIR 0x8 |
| #define GPIO_DATA_SET 0x10 |
| #define GPIO_DATA_CLR 0x14 |
| #define GPIO_PULL_EN 0x18 |
| #define GPIO_PULL_TYPE 0x1C |
| #define GPIO_INT_EN 0x20 |
| #define GPIO_INT_STAT 0x24 |
| #define GPIO_INT_MASK 0x2C |
| #define GPIO_INT_CLR 0x30 |
| #define GPIO_INT_TYPE 0x34 |
| #define GPIO_INT_BOTH_EDGE 0x38 |
| #define GPIO_INT_LEVEL 0x3C |
| #define GPIO_DEBOUNCE_EN 0x40 |
| #define GPIO_DEBOUNCE_PRESCALE 0x44 |
| |
| #define GPIO_PORT_NUM 3 |
| |
| static void _set_gpio_irqenable(void __iomem *base, unsigned int index, |
| int enable) |
| { |
| unsigned int reg; |
| |
| reg = __raw_readl(base + GPIO_INT_EN); |
| reg = (reg & (~(1 << index))) | (!!enable << index); |
| __raw_writel(reg, base + GPIO_INT_EN); |
| } |
| |
| static void gpio_ack_irq(struct irq_data *d) |
| { |
| unsigned int gpio = irq_to_gpio(d->irq); |
| void __iomem *base = GPIO_BASE(gpio / 32); |
| |
| __raw_writel(1 << (gpio % 32), base + GPIO_INT_CLR); |
| } |
| |
| static void gpio_mask_irq(struct irq_data *d) |
| { |
| unsigned int gpio = irq_to_gpio(d->irq); |
| void __iomem *base = GPIO_BASE(gpio / 32); |
| |
| _set_gpio_irqenable(base, gpio % 32, 0); |
| } |
| |
| static void gpio_unmask_irq(struct irq_data *d) |
| { |
| unsigned int gpio = irq_to_gpio(d->irq); |
| void __iomem *base = GPIO_BASE(gpio / 32); |
| |
| _set_gpio_irqenable(base, gpio % 32, 1); |
| } |
| |
| static int gpio_set_irq_type(struct irq_data *d, unsigned int type) |
| { |
| unsigned int gpio = irq_to_gpio(d->irq); |
| unsigned int gpio_mask = 1 << (gpio % 32); |
| void __iomem *base = GPIO_BASE(gpio / 32); |
| unsigned int reg_both, reg_level, reg_type; |
| |
| reg_type = __raw_readl(base + GPIO_INT_TYPE); |
| reg_level = __raw_readl(base + GPIO_INT_LEVEL); |
| reg_both = __raw_readl(base + GPIO_INT_BOTH_EDGE); |
| |
| switch (type) { |
| case IRQ_TYPE_EDGE_BOTH: |
| reg_type &= ~gpio_mask; |
| reg_both |= gpio_mask; |
| break; |
| case IRQ_TYPE_EDGE_RISING: |
| reg_type &= ~gpio_mask; |
| reg_both &= ~gpio_mask; |
| reg_level &= ~gpio_mask; |
| break; |
| case IRQ_TYPE_EDGE_FALLING: |
| reg_type &= ~gpio_mask; |
| reg_both &= ~gpio_mask; |
| reg_level |= gpio_mask; |
| break; |
| case IRQ_TYPE_LEVEL_HIGH: |
| reg_type |= gpio_mask; |
| reg_level &= ~gpio_mask; |
| break; |
| case IRQ_TYPE_LEVEL_LOW: |
| reg_type |= gpio_mask; |
| reg_level |= gpio_mask; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| __raw_writel(reg_type, base + GPIO_INT_TYPE); |
| __raw_writel(reg_level, base + GPIO_INT_LEVEL); |
| __raw_writel(reg_both, base + GPIO_INT_BOTH_EDGE); |
| |
| gpio_ack_irq(d); |
| |
| return 0; |
| } |
| |
| static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) |
| { |
| unsigned int port = (unsigned int)irq_desc_get_handler_data(desc); |
| unsigned int gpio_irq_no, irq_stat; |
| |
| irq_stat = __raw_readl(GPIO_BASE(port) + GPIO_INT_STAT); |
| |
| gpio_irq_no = GPIO_IRQ_BASE + port * 32; |
| for (; irq_stat != 0; irq_stat >>= 1, gpio_irq_no++) { |
| |
| if ((irq_stat & 1) == 0) |
| continue; |
| |
| generic_handle_irq(gpio_irq_no); |
| } |
| } |
| |
| static struct irq_chip gpio_irq_chip = { |
| .name = "GPIO", |
| .irq_ack = gpio_ack_irq, |
| .irq_mask = gpio_mask_irq, |
| .irq_unmask = gpio_unmask_irq, |
| .irq_set_type = gpio_set_irq_type, |
| }; |
| |
| static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, |
| int dir) |
| { |
| void __iomem *base = GPIO_BASE(offset / 32); |
| unsigned int reg; |
| |
| reg = __raw_readl(base + GPIO_DIR); |
| if (dir) |
| reg |= 1 << (offset % 32); |
| else |
| reg &= ~(1 << (offset % 32)); |
| __raw_writel(reg, base + GPIO_DIR); |
| } |
| |
| static void gemini_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| void __iomem *base = GPIO_BASE(offset / 32); |
| |
| if (value) |
| __raw_writel(1 << (offset % 32), base + GPIO_DATA_SET); |
| else |
| __raw_writel(1 << (offset % 32), base + GPIO_DATA_CLR); |
| } |
| |
| static int gemini_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| void __iomem *base = GPIO_BASE(offset / 32); |
| |
| return (__raw_readl(base + GPIO_DATA_IN) >> (offset % 32)) & 1; |
| } |
| |
| static int gemini_gpio_direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| _set_gpio_direction(chip, offset, 0); |
| return 0; |
| } |
| |
| static int gemini_gpio_direction_output(struct gpio_chip *chip, unsigned offset, |
| int value) |
| { |
| _set_gpio_direction(chip, offset, 1); |
| gemini_gpio_set(chip, offset, value); |
| return 0; |
| } |
| |
| static struct gpio_chip gemini_gpio_chip = { |
| .label = "Gemini", |
| .direction_input = gemini_gpio_direction_input, |
| .get = gemini_gpio_get, |
| .direction_output = gemini_gpio_direction_output, |
| .set = gemini_gpio_set, |
| .base = 0, |
| .ngpio = GPIO_PORT_NUM * 32, |
| }; |
| |
| void __init gemini_gpio_init(void) |
| { |
| int i, j; |
| |
| for (i = 0; i < GPIO_PORT_NUM; i++) { |
| /* disable, unmask and clear all interrupts */ |
| __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_EN); |
| __raw_writel(0x0, GPIO_BASE(i) + GPIO_INT_MASK); |
| __raw_writel(~0x0, GPIO_BASE(i) + GPIO_INT_CLR); |
| |
| for (j = GPIO_IRQ_BASE + i * 32; |
| j < GPIO_IRQ_BASE + (i + 1) * 32; j++) { |
| irq_set_chip_and_handler(j, &gpio_irq_chip, |
| handle_edge_irq); |
| set_irq_flags(j, IRQF_VALID); |
| } |
| |
| irq_set_chained_handler(IRQ_GPIO(i), gpio_irq_handler); |
| irq_set_handler_data(IRQ_GPIO(i), (void *)i); |
| } |
| |
| BUG_ON(gpiochip_add(&gemini_gpio_chip)); |
| } |