| TI EDMA |
| |
| Required properties: |
| - compatible : "ti,edma3" |
| - ti,edma-regions: Number of regions |
| - ti,edma-slots: Number of slots |
| - #dma-cells: Should be set to <1> |
| Clients should use a single channel number per DMA request. |
| - dma-channels: Specify total DMA channels per CC |
| - reg: Memory map for accessing module |
| - interrupt-parent: Interrupt controller the interrupt is routed through |
| - interrupts: Exactly 3 interrupts need to be specified in the order: |
| 1. Transfer completion interrupt. |
| 2. Memory protection interrupt. |
| 3. Error interrupt. |
| Optional properties: |
| - ti,hwmods: Name of the hwmods associated to the EDMA |
| - ti,edma-xbar-event-map: Crossbar event to channel map |
| |
| Example: |
| |
| edma: edma@49000000 { |
| reg = <0x49000000 0x10000>; |
| interrupt-parent = <&intc>; |
| interrupts = <12 13 14>; |
| compatible = "ti,edma3"; |
| ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2"; |
| #dma-cells = <1>; |
| dma-channels = <64>; |
| ti,edma-regions = <4>; |
| ti,edma-slots = <256>; |
| ti,edma-xbar-event-map = <1 12 |
| 2 13>; |
| }; |
