| /* |
| * linux/kernel/power/swap.c |
| * |
| * This file provides functions for reading the suspend image from |
| * and writing it to a swap partition. |
| * |
| * Copyright (C) 1998,2001-2005 Pavel Machek <pavel@suse.cz> |
| * Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl> |
| * |
| * This file is released under the GPLv2. |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/smp_lock.h> |
| #include <linux/file.h> |
| #include <linux/utsname.h> |
| #include <linux/version.h> |
| #include <linux/delay.h> |
| #include <linux/bitops.h> |
| #include <linux/genhd.h> |
| #include <linux/device.h> |
| #include <linux/buffer_head.h> |
| #include <linux/bio.h> |
| #include <linux/blkdev.h> |
| #include <linux/swap.h> |
| #include <linux/swapops.h> |
| #include <linux/pm.h> |
| |
| #include "power.h" |
| |
| extern char resume_file[]; |
| |
| #define SWSUSP_SIG "S1SUSPEND" |
| |
| static struct swsusp_header { |
| char reserved[PAGE_SIZE - 20 - sizeof(sector_t)]; |
| sector_t image; |
| char orig_sig[10]; |
| char sig[10]; |
| } __attribute__((packed, aligned(PAGE_SIZE))) swsusp_header; |
| |
| /* |
| * General things |
| */ |
| |
| static unsigned short root_swap = 0xffff; |
| static struct block_device *resume_bdev; |
| |
| /** |
| * submit - submit BIO request. |
| * @rw: READ or WRITE. |
| * @off physical offset of page. |
| * @page: page we're reading or writing. |
| * @bio_chain: list of pending biod (for async reading) |
| * |
| * Straight from the textbook - allocate and initialize the bio. |
| * If we're reading, make sure the page is marked as dirty. |
| * Then submit it and, if @bio_chain == NULL, wait. |
| */ |
| static int submit(int rw, pgoff_t page_off, struct page *page, |
| struct bio **bio_chain) |
| { |
| struct bio *bio; |
| |
| bio = bio_alloc(__GFP_WAIT | __GFP_HIGH, 1); |
| if (!bio) |
| return -ENOMEM; |
| bio->bi_sector = page_off * (PAGE_SIZE >> 9); |
| bio->bi_bdev = resume_bdev; |
| bio->bi_end_io = end_swap_bio_read; |
| |
| if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) { |
| printk("swsusp: ERROR: adding page to bio at %ld\n", page_off); |
| bio_put(bio); |
| return -EFAULT; |
| } |
| |
| lock_page(page); |
| bio_get(bio); |
| |
| if (bio_chain == NULL) { |
| submit_bio(rw | (1 << BIO_RW_SYNC), bio); |
| wait_on_page_locked(page); |
| if (rw == READ) |
| bio_set_pages_dirty(bio); |
| bio_put(bio); |
| } else { |
| if (rw == READ) |
| get_page(page); /* These pages are freed later */ |
| bio->bi_private = *bio_chain; |
| *bio_chain = bio; |
| submit_bio(rw | (1 << BIO_RW_SYNC), bio); |
| } |
| return 0; |
| } |
| |
| static int bio_read_page(pgoff_t page_off, void *addr, struct bio **bio_chain) |
| { |
| return submit(READ, page_off, virt_to_page(addr), bio_chain); |
| } |
| |
| static int bio_write_page(pgoff_t page_off, void *addr, struct bio **bio_chain) |
| { |
| return submit(WRITE, page_off, virt_to_page(addr), bio_chain); |
| } |
| |
| static int wait_on_bio_chain(struct bio **bio_chain) |
| { |
| struct bio *bio; |
| struct bio *next_bio; |
| int ret = 0; |
| |
| if (bio_chain == NULL) |
| return 0; |
| |
| bio = *bio_chain; |
| if (bio == NULL) |
| return 0; |
| while (bio) { |
| struct page *page; |
| |
| next_bio = bio->bi_private; |
| page = bio->bi_io_vec[0].bv_page; |
| wait_on_page_locked(page); |
| if (!PageUptodate(page) || PageError(page)) |
| ret = -EIO; |
| put_page(page); |
| bio_put(bio); |
| bio = next_bio; |
| } |
| *bio_chain = NULL; |
| return ret; |
| } |
| |
| static void show_speed(struct timeval *start, struct timeval *stop, |
| unsigned nr_pages, char *msg) |
| { |
| s64 elapsed_centisecs64; |
| int centisecs; |
| int k; |
| int kps; |
| |
| elapsed_centisecs64 = timeval_to_ns(stop) - timeval_to_ns(start); |
| do_div(elapsed_centisecs64, NSEC_PER_SEC / 100); |
| centisecs = elapsed_centisecs64; |
| if (centisecs == 0) |
| centisecs = 1; /* avoid div-by-zero */ |
| k = nr_pages * (PAGE_SIZE / 1024); |
| kps = (k * 100) / centisecs; |
| printk("%s %d kbytes in %d.%02d seconds (%d.%02d MB/s)\n", msg, k, |
| centisecs / 100, centisecs % 100, |
| kps / 1000, (kps % 1000) / 10); |
| } |
| |
| /* |
| * Saving part |
| */ |
| |
| static int mark_swapfiles(sector_t start) |
| { |
| int error; |
| |
| bio_read_page(swsusp_resume_block, &swsusp_header, NULL); |
| if (!memcmp("SWAP-SPACE",swsusp_header.sig, 10) || |
| !memcmp("SWAPSPACE2",swsusp_header.sig, 10)) { |
| memcpy(swsusp_header.orig_sig,swsusp_header.sig, 10); |
| memcpy(swsusp_header.sig,SWSUSP_SIG, 10); |
| swsusp_header.image = start; |
| error = bio_write_page(swsusp_resume_block, |
| &swsusp_header, NULL); |
| } else { |
| printk(KERN_ERR "swsusp: Swap header not found!\n"); |
| error = -ENODEV; |
| } |
| return error; |
| } |
| |
| /** |
| * swsusp_swap_check - check if the resume device is a swap device |
| * and get its index (if so) |
| */ |
| |
| static int swsusp_swap_check(void) /* This is called before saving image */ |
| { |
| int res; |
| |
| res = swap_type_of(swsusp_resume_device, swsusp_resume_block); |
| if (res < 0) |
| return res; |
| |
| root_swap = res; |
| resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_WRITE); |
| if (IS_ERR(resume_bdev)) |
| return PTR_ERR(resume_bdev); |
| |
| res = set_blocksize(resume_bdev, PAGE_SIZE); |
| if (res < 0) |
| blkdev_put(resume_bdev); |
| |
| return res; |
| } |
| |
| /** |
| * write_page - Write one page to given swap location. |
| * @buf: Address we're writing. |
| * @offset: Offset of the swap page we're writing to. |
| * @bio_chain: Link the next write BIO here |
| */ |
| |
| static int write_page(void *buf, sector_t offset, struct bio **bio_chain) |
| { |
| void *src; |
| |
| if (!offset) |
| return -ENOSPC; |
| |
| if (bio_chain) { |
| src = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH); |
| if (src) { |
| memcpy(src, buf, PAGE_SIZE); |
| } else { |
| WARN_ON_ONCE(1); |
| bio_chain = NULL; /* Go synchronous */ |
| src = buf; |
| } |
| } else { |
| src = buf; |
| } |
| return bio_write_page(offset, src, bio_chain); |
| } |
| |
| /* |
| * The swap map is a data structure used for keeping track of each page |
| * written to a swap partition. It consists of many swap_map_page |
| * structures that contain each an array of MAP_PAGE_SIZE swap entries. |
| * These structures are stored on the swap and linked together with the |
| * help of the .next_swap member. |
| * |
| * The swap map is created during suspend. The swap map pages are |
| * allocated and populated one at a time, so we only need one memory |
| * page to set up the entire structure. |
| * |
| * During resume we also only need to use one swap_map_page structure |
| * at a time. |
| */ |
| |
| #define MAP_PAGE_ENTRIES (PAGE_SIZE / sizeof(sector_t) - 1) |
| |
| struct swap_map_page { |
| sector_t entries[MAP_PAGE_ENTRIES]; |
| sector_t next_swap; |
| }; |
| |
| /** |
| * The swap_map_handle structure is used for handling swap in |
| * a file-alike way |
| */ |
| |
| struct swap_map_handle { |
| struct swap_map_page *cur; |
| sector_t cur_swap; |
| struct bitmap_page *bitmap; |
| unsigned int k; |
| }; |
| |
| static void release_swap_writer(struct swap_map_handle *handle) |
| { |
| if (handle->cur) |
| free_page((unsigned long)handle->cur); |
| handle->cur = NULL; |
| if (handle->bitmap) |
| free_bitmap(handle->bitmap); |
| handle->bitmap = NULL; |
| } |
| |
| static int get_swap_writer(struct swap_map_handle *handle) |
| { |
| handle->cur = (struct swap_map_page *)get_zeroed_page(GFP_KERNEL); |
| if (!handle->cur) |
| return -ENOMEM; |
| handle->bitmap = alloc_bitmap(count_swap_pages(root_swap, 0)); |
| if (!handle->bitmap) { |
| release_swap_writer(handle); |
| return -ENOMEM; |
| } |
| handle->cur_swap = alloc_swapdev_block(root_swap, handle->bitmap); |
| if (!handle->cur_swap) { |
| release_swap_writer(handle); |
| return -ENOSPC; |
| } |
| handle->k = 0; |
| return 0; |
| } |
| |
| static int swap_write_page(struct swap_map_handle *handle, void *buf, |
| struct bio **bio_chain) |
| { |
| int error = 0; |
| sector_t offset; |
| |
| if (!handle->cur) |
| return -EINVAL; |
| offset = alloc_swapdev_block(root_swap, handle->bitmap); |
| error = write_page(buf, offset, bio_chain); |
| if (error) |
| return error; |
| handle->cur->entries[handle->k++] = offset; |
| if (handle->k >= MAP_PAGE_ENTRIES) { |
| error = wait_on_bio_chain(bio_chain); |
| if (error) |
| goto out; |
| offset = alloc_swapdev_block(root_swap, handle->bitmap); |
| if (!offset) |
| return -ENOSPC; |
| handle->cur->next_swap = offset; |
| error = write_page(handle->cur, handle->cur_swap, NULL); |
| if (error) |
| goto out; |
| memset(handle->cur, 0, PAGE_SIZE); |
| handle->cur_swap = offset; |
| handle->k = 0; |
| } |
| out: |
| return error; |
| } |
| |
| static int flush_swap_writer(struct swap_map_handle *handle) |
| { |
| if (handle->cur && handle->cur_swap) |
| return write_page(handle->cur, handle->cur_swap, NULL); |
| else |
| return -EINVAL; |
| } |
| |
| /** |
| * save_image - save the suspend image data |
| */ |
| |
| static int save_image(struct swap_map_handle *handle, |
| struct snapshot_handle *snapshot, |
| unsigned int nr_to_write) |
| { |
| unsigned int m; |
| int ret; |
| int error = 0; |
| int nr_pages; |
| int err2; |
| struct bio *bio; |
| struct timeval start; |
| struct timeval stop; |
| |
| printk("Saving image data pages (%u pages) ... ", nr_to_write); |
| m = nr_to_write / 100; |
| if (!m) |
| m = 1; |
| nr_pages = 0; |
| bio = NULL; |
| do_gettimeofday(&start); |
| do { |
| ret = snapshot_read_next(snapshot, PAGE_SIZE); |
| if (ret > 0) { |
| error = swap_write_page(handle, data_of(*snapshot), |
| &bio); |
| if (error) |
| break; |
| if (!(nr_pages % m)) |
| printk("\b\b\b\b%3d%%", nr_pages / m); |
| nr_pages++; |
| } |
| } while (ret > 0); |
| err2 = wait_on_bio_chain(&bio); |
| do_gettimeofday(&stop); |
| if (!error) |
| error = err2; |
| if (!error) |
| printk("\b\b\b\bdone\n"); |
| show_speed(&start, &stop, nr_to_write, "Wrote"); |
| return error; |
| } |
| |
| /** |
| * enough_swap - Make sure we have enough swap to save the image. |
| * |
| * Returns TRUE or FALSE after checking the total amount of swap |
| * space avaiable from the resume partition. |
| */ |
| |
| static int enough_swap(unsigned int nr_pages) |
| { |
| unsigned int free_swap = count_swap_pages(root_swap, 1); |
| |
| pr_debug("swsusp: free swap pages: %u\n", free_swap); |
| return free_swap > nr_pages + PAGES_FOR_IO; |
| } |
| |
| /** |
| * swsusp_write - Write entire image and metadata. |
| * |
| * It is important _NOT_ to umount filesystems at this point. We want |
| * them synced (in case something goes wrong) but we DO not want to mark |
| * filesystem clean: it is not. (And it does not matter, if we resume |
| * correctly, we'll mark system clean, anyway.) |
| */ |
| |
| int swsusp_write(void) |
| { |
| struct swap_map_handle handle; |
| struct snapshot_handle snapshot; |
| struct swsusp_info *header; |
| int error; |
| |
| error = swsusp_swap_check(); |
| if (error) { |
| printk(KERN_ERR "swsusp: Cannot find swap device, try " |
| "swapon -a.\n"); |
| return error; |
| } |
| memset(&snapshot, 0, sizeof(struct snapshot_handle)); |
| error = snapshot_read_next(&snapshot, PAGE_SIZE); |
| if (error < PAGE_SIZE) { |
| if (error >= 0) |
| error = -EFAULT; |
| |
| goto out; |
| } |
| header = (struct swsusp_info *)data_of(snapshot); |
| if (!enough_swap(header->pages)) { |
| printk(KERN_ERR "swsusp: Not enough free swap\n"); |
| error = -ENOSPC; |
| goto out; |
| } |
| error = get_swap_writer(&handle); |
| if (!error) { |
| sector_t start = handle.cur_swap; |
| |
| error = swap_write_page(&handle, header, NULL); |
| if (!error) |
| error = save_image(&handle, &snapshot, |
| header->pages - 1); |
| |
| if (!error) { |
| flush_swap_writer(&handle); |
| printk("S"); |
| error = mark_swapfiles(start); |
| printk("|\n"); |
| } |
| } |
| if (error) |
| free_all_swap_pages(root_swap, handle.bitmap); |
| release_swap_writer(&handle); |
| out: |
| swsusp_close(); |
| return error; |
| } |
| |
| /** |
| * The following functions allow us to read data using a swap map |
| * in a file-alike way |
| */ |
| |
| static void release_swap_reader(struct swap_map_handle *handle) |
| { |
| if (handle->cur) |
| free_page((unsigned long)handle->cur); |
| handle->cur = NULL; |
| } |
| |
| static int get_swap_reader(struct swap_map_handle *handle, sector_t start) |
| { |
| int error; |
| |
| if (!start) |
| return -EINVAL; |
| |
| handle->cur = (struct swap_map_page *)get_zeroed_page(__GFP_WAIT | __GFP_HIGH); |
| if (!handle->cur) |
| return -ENOMEM; |
| |
| error = bio_read_page(start, handle->cur, NULL); |
| if (error) { |
| release_swap_reader(handle); |
| return error; |
| } |
| handle->k = 0; |
| return 0; |
| } |
| |
| static int swap_read_page(struct swap_map_handle *handle, void *buf, |
| struct bio **bio_chain) |
| { |
| sector_t offset; |
| int error; |
| |
| if (!handle->cur) |
| return -EINVAL; |
| offset = handle->cur->entries[handle->k]; |
| if (!offset) |
| return -EFAULT; |
| error = bio_read_page(offset, buf, bio_chain); |
| if (error) |
| return error; |
| if (++handle->k >= MAP_PAGE_ENTRIES) { |
| error = wait_on_bio_chain(bio_chain); |
| handle->k = 0; |
| offset = handle->cur->next_swap; |
| if (!offset) |
| release_swap_reader(handle); |
| else if (!error) |
| error = bio_read_page(offset, handle->cur, NULL); |
| } |
| return error; |
| } |
| |
| /** |
| * load_image - load the image using the swap map handle |
| * @handle and the snapshot handle @snapshot |
| * (assume there are @nr_pages pages to load) |
| */ |
| |
| static int load_image(struct swap_map_handle *handle, |
| struct snapshot_handle *snapshot, |
| unsigned int nr_to_read) |
| { |
| unsigned int m; |
| int error = 0; |
| struct timeval start; |
| struct timeval stop; |
| struct bio *bio; |
| int err2; |
| unsigned nr_pages; |
| |
| printk("Loading image data pages (%u pages) ... ", nr_to_read); |
| m = nr_to_read / 100; |
| if (!m) |
| m = 1; |
| nr_pages = 0; |
| bio = NULL; |
| do_gettimeofday(&start); |
| for ( ; ; ) { |
| error = snapshot_write_next(snapshot, PAGE_SIZE); |
| if (error <= 0) |
| break; |
| error = swap_read_page(handle, data_of(*snapshot), &bio); |
| if (error) |
| break; |
| if (snapshot->sync_read) |
| error = wait_on_bio_chain(&bio); |
| if (error) |
| break; |
| if (!(nr_pages % m)) |
| printk("\b\b\b\b%3d%%", nr_pages / m); |
| nr_pages++; |
| } |
| err2 = wait_on_bio_chain(&bio); |
| do_gettimeofday(&stop); |
| if (!error) |
| error = err2; |
| if (!error) { |
| printk("\b\b\b\bdone\n"); |
| snapshot_write_finalize(snapshot); |
| if (!snapshot_image_loaded(snapshot)) |
| error = -ENODATA; |
| } |
| show_speed(&start, &stop, nr_to_read, "Read"); |
| return error; |
| } |
| |
| int swsusp_read(void) |
| { |
| int error; |
| struct swap_map_handle handle; |
| struct snapshot_handle snapshot; |
| struct swsusp_info *header; |
| |
| if (IS_ERR(resume_bdev)) { |
| pr_debug("swsusp: block device not initialised\n"); |
| return PTR_ERR(resume_bdev); |
| } |
| |
| memset(&snapshot, 0, sizeof(struct snapshot_handle)); |
| error = snapshot_write_next(&snapshot, PAGE_SIZE); |
| if (error < PAGE_SIZE) |
| return error < 0 ? error : -EFAULT; |
| header = (struct swsusp_info *)data_of(snapshot); |
| error = get_swap_reader(&handle, swsusp_header.image); |
| if (!error) |
| error = swap_read_page(&handle, header, NULL); |
| if (!error) |
| error = load_image(&handle, &snapshot, header->pages - 1); |
| release_swap_reader(&handle); |
| |
| blkdev_put(resume_bdev); |
| |
| if (!error) |
| pr_debug("swsusp: Reading resume file was successful\n"); |
| else |
| pr_debug("swsusp: Error %d resuming\n", error); |
| return error; |
| } |
| |
| /** |
| * swsusp_check - Check for swsusp signature in the resume device |
| */ |
| |
| int swsusp_check(void) |
| { |
| int error; |
| |
| resume_bdev = open_by_devnum(swsusp_resume_device, FMODE_READ); |
| if (!IS_ERR(resume_bdev)) { |
| set_blocksize(resume_bdev, PAGE_SIZE); |
| memset(&swsusp_header, 0, sizeof(swsusp_header)); |
| error = bio_read_page(swsusp_resume_block, |
| &swsusp_header, NULL); |
| if (error) |
| return error; |
| |
| if (!memcmp(SWSUSP_SIG, swsusp_header.sig, 10)) { |
| memcpy(swsusp_header.sig, swsusp_header.orig_sig, 10); |
| /* Reset swap signature now */ |
| error = bio_write_page(swsusp_resume_block, |
| &swsusp_header, NULL); |
| } else { |
| return -EINVAL; |
| } |
| if (error) |
| blkdev_put(resume_bdev); |
| else |
| pr_debug("swsusp: Signature found, resuming\n"); |
| } else { |
| error = PTR_ERR(resume_bdev); |
| } |
| |
| if (error) |
| pr_debug("swsusp: Error %d check for resume file\n", error); |
| |
| return error; |
| } |
| |
| /** |
| * swsusp_close - close swap device. |
| */ |
| |
| void swsusp_close(void) |
| { |
| if (IS_ERR(resume_bdev)) { |
| pr_debug("swsusp: block device not initialised\n"); |
| return; |
| } |
| |
| blkdev_put(resume_bdev); |
| } |