| /* |
| * Samsung TV Mixer driver |
| * |
| * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. |
| * |
| * Tomasz Stanislawski, <t.stanislaws@samsung.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published |
| * by the Free Software Foundiation. either version 2 of the License, |
| * or (at your option) any later version |
| */ |
| |
| #include "mixer.h" |
| |
| #include <media/videobuf2-dma-contig.h> |
| |
| /* FORMAT DEFINITIONS */ |
| |
| static const struct mxr_format mxr_fb_fmt_rgb565 = { |
| .name = "RGB565", |
| .fourcc = V4L2_PIX_FMT_RGB565, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .num_planes = 1, |
| .plane = { |
| { .width = 1, .height = 1, .size = 2 }, |
| }, |
| .num_subframes = 1, |
| .cookie = 4, |
| }; |
| |
| static const struct mxr_format mxr_fb_fmt_argb1555 = { |
| .name = "ARGB1555", |
| .num_planes = 1, |
| .fourcc = V4L2_PIX_FMT_RGB555, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .plane = { |
| { .width = 1, .height = 1, .size = 2 }, |
| }, |
| .num_subframes = 1, |
| .cookie = 5, |
| }; |
| |
| static const struct mxr_format mxr_fb_fmt_argb4444 = { |
| .name = "ARGB4444", |
| .num_planes = 1, |
| .fourcc = V4L2_PIX_FMT_RGB444, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .plane = { |
| { .width = 1, .height = 1, .size = 2 }, |
| }, |
| .num_subframes = 1, |
| .cookie = 6, |
| }; |
| |
| static const struct mxr_format mxr_fb_fmt_argb8888 = { |
| .name = "ARGB8888", |
| .fourcc = V4L2_PIX_FMT_BGR32, |
| .colorspace = V4L2_COLORSPACE_SRGB, |
| .num_planes = 1, |
| .plane = { |
| { .width = 1, .height = 1, .size = 4 }, |
| }, |
| .num_subframes = 1, |
| .cookie = 7, |
| }; |
| |
| static const struct mxr_format *mxr_graph_format[] = { |
| &mxr_fb_fmt_rgb565, |
| &mxr_fb_fmt_argb1555, |
| &mxr_fb_fmt_argb4444, |
| &mxr_fb_fmt_argb8888, |
| }; |
| |
| /* AUXILIARY CALLBACKS */ |
| |
| static void mxr_graph_layer_release(struct mxr_layer *layer) |
| { |
| mxr_base_layer_unregister(layer); |
| mxr_base_layer_release(layer); |
| } |
| |
| static void mxr_graph_buffer_set(struct mxr_layer *layer, |
| struct mxr_buffer *buf) |
| { |
| dma_addr_t addr = 0; |
| |
| if (buf) |
| addr = vb2_dma_contig_plane_dma_addr(&buf->vb, 0); |
| mxr_reg_graph_buffer(layer->mdev, layer->idx, addr); |
| } |
| |
| static void mxr_graph_stream_set(struct mxr_layer *layer, int en) |
| { |
| mxr_reg_graph_layer_stream(layer->mdev, layer->idx, en); |
| } |
| |
| static void mxr_graph_format_set(struct mxr_layer *layer) |
| { |
| mxr_reg_graph_format(layer->mdev, layer->idx, |
| layer->fmt, &layer->geo); |
| } |
| |
| static inline unsigned int closest(unsigned int x, unsigned int a, |
| unsigned int b, unsigned long flags) |
| { |
| unsigned int mid = (a + b) / 2; |
| |
| /* choosing closest value with constraints according to table: |
| * -------------+-----+-----+-----+-------+ |
| * flags | 0 | LE | GE | LE|GE | |
| * -------------+-----+-----+-----+-------+ |
| * x <= a | a | a | a | a | |
| * a < x <= mid | a | a | b | a | |
| * mid < x < b | b | a | b | b | |
| * b <= x | b | b | b | b | |
| * -------------+-----+-----+-----+-------+ |
| */ |
| |
| /* remove all non-constraint flags */ |
| flags &= V4L2_SEL_FLAG_LE | V4L2_SEL_FLAG_GE; |
| |
| if (x <= a) |
| return a; |
| if (x >= b) |
| return b; |
| if (flags == V4L2_SEL_FLAG_LE) |
| return a; |
| if (flags == V4L2_SEL_FLAG_GE) |
| return b; |
| if (x <= mid) |
| return a; |
| return b; |
| } |
| |
| static inline unsigned int do_center(unsigned int center, |
| unsigned int size, unsigned int upper, unsigned int flags) |
| { |
| unsigned int lower; |
| |
| if (flags & MXR_NO_OFFSET) |
| return 0; |
| |
| lower = center - min(center, size / 2); |
| return min(lower, upper - size); |
| } |
| |
| static void mxr_graph_fix_geometry(struct mxr_layer *layer, |
| enum mxr_geometry_stage stage, unsigned long flags) |
| { |
| struct mxr_geometry *geo = &layer->geo; |
| struct mxr_crop *src = &geo->src; |
| struct mxr_crop *dst = &geo->dst; |
| unsigned int x_center, y_center; |
| |
| switch (stage) { |
| |
| case MXR_GEOMETRY_SINK: /* nothing to be fixed here */ |
| flags = 0; |
| /* fall through */ |
| |
| case MXR_GEOMETRY_COMPOSE: |
| /* remember center of the area */ |
| x_center = dst->x_offset + dst->width / 2; |
| y_center = dst->y_offset + dst->height / 2; |
| /* round up/down to 2 multiple depending on flags */ |
| if (flags & V4L2_SEL_FLAG_LE) { |
| dst->width = round_down(dst->width, 2); |
| dst->height = round_down(dst->height, 2); |
| } else { |
| dst->width = round_up(dst->width, 2); |
| dst->height = round_up(dst->height, 2); |
| } |
| /* assure that compose rect is inside display area */ |
| dst->width = min(dst->width, dst->full_width); |
| dst->height = min(dst->height, dst->full_height); |
| |
| /* ensure that compose is reachable using 2x scaling */ |
| dst->width = min(dst->width, 2 * src->full_width); |
| dst->height = min(dst->height, 2 * src->full_height); |
| |
| /* setup offsets */ |
| dst->x_offset = do_center(x_center, dst->width, |
| dst->full_width, flags); |
| dst->y_offset = do_center(y_center, dst->height, |
| dst->full_height, flags); |
| flags = 0; |
| /* fall through */ |
| |
| case MXR_GEOMETRY_CROP: |
| /* remember center of the area */ |
| x_center = src->x_offset + src->width / 2; |
| y_center = src->y_offset + src->height / 2; |
| /* ensure that cropping area lies inside the buffer */ |
| if (src->full_width < dst->width) |
| src->width = dst->width / 2; |
| else |
| src->width = closest(src->width, dst->width / 2, |
| dst->width, flags); |
| |
| if (src->width == dst->width) |
| geo->x_ratio = 0; |
| else |
| geo->x_ratio = 1; |
| |
| if (src->full_height < dst->height) |
| src->height = dst->height / 2; |
| else |
| src->height = closest(src->height, dst->height / 2, |
| dst->height, flags); |
| |
| if (src->height == dst->height) |
| geo->y_ratio = 0; |
| else |
| geo->y_ratio = 1; |
| |
| /* setup offsets */ |
| src->x_offset = do_center(x_center, src->width, |
| src->full_width, flags); |
| src->y_offset = do_center(y_center, src->height, |
| src->full_height, flags); |
| flags = 0; |
| /* fall through */ |
| case MXR_GEOMETRY_SOURCE: |
| src->full_width = clamp_val(src->full_width, |
| src->width + src->x_offset, 32767); |
| src->full_height = clamp_val(src->full_height, |
| src->height + src->y_offset, 2047); |
| } |
| } |
| |
| /* PUBLIC API */ |
| |
| struct mxr_layer *mxr_graph_layer_create(struct mxr_device *mdev, int idx) |
| { |
| struct mxr_layer *layer; |
| int ret; |
| struct mxr_layer_ops ops = { |
| .release = mxr_graph_layer_release, |
| .buffer_set = mxr_graph_buffer_set, |
| .stream_set = mxr_graph_stream_set, |
| .format_set = mxr_graph_format_set, |
| .fix_geometry = mxr_graph_fix_geometry, |
| }; |
| char name[32]; |
| |
| sprintf(name, "graph%d", idx); |
| |
| layer = mxr_base_layer_create(mdev, idx, name, &ops); |
| if (layer == NULL) { |
| mxr_err(mdev, "failed to initialize layer(%d) base\n", idx); |
| goto fail; |
| } |
| |
| layer->fmt_array = mxr_graph_format; |
| layer->fmt_array_size = ARRAY_SIZE(mxr_graph_format); |
| |
| ret = mxr_base_layer_register(layer); |
| if (ret) |
| goto fail_layer; |
| |
| return layer; |
| |
| fail_layer: |
| mxr_base_layer_release(layer); |
| |
| fail: |
| return NULL; |
| } |
| |