arch/arm/mach-realview/include/mach/board-pba8.h - maze/linux - Git at Google

 /*
  * include/asm-arm/arch-realview/board-pba8.h
  *
  * Copyright (C) 2008 ARM Limited
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
  * MA 02110-1301, USA.
  */

 #ifndef __ASM_ARCH_BOARD_PBA8_H
 #define __ASM_ARCH_BOARD_PBA8_H

 #include <mach/platform.h>

 /*
  * Peripheral addresses
  */
 #define REALVIEW_PBA8_UART0_BASE		0x10009000	/* UART 0 */
 #define REALVIEW_PBA8_UART1_BASE		0x1000A000	/* UART 1 */
 #define REALVIEW_PBA8_UART2_BASE		0x1000B000	/* UART 2 */
 #define REALVIEW_PBA8_UART3_BASE		0x1000C000	/* UART 3 */
 #define REALVIEW_PBA8_SSP_BASE			0x1000D000	/* Synchronous Serial Port */
 #define REALVIEW_PBA8_WATCHDOG0_BASE		0x1000F000	/* Watchdog 0 */
 #define REALVIEW_PBA8_WATCHDOG_BASE		0x10010000	/* watchdog interface */
 #define REALVIEW_PBA8_TIMER0_1_BASE		0x10011000	/* Timer 0 and 1 */
 #define REALVIEW_PBA8_TIMER2_3_BASE		0x10012000	/* Timer 2 and 3 */
 #define REALVIEW_PBA8_GPIO0_BASE		0x10013000	/* GPIO port 0 */
 #define REALVIEW_PBA8_RTC_BASE			0x10017000	/* Real Time Clock */
 #define REALVIEW_PBA8_TIMER4_5_BASE		0x10018000	/* Timer 4/5 */
 #define REALVIEW_PBA8_TIMER6_7_BASE		0x10019000	/* Timer 6/7 */
 #define REALVIEW_PBA8_SCTL_BASE			0x1001A000	/* System Controller */
 #define REALVIEW_PBA8_CLCD_BASE			0x10020000	/* CLCD */
 #define REALVIEW_PBA8_ONB_SRAM_BASE		0x10060000	/* On-board SRAM */
 #define REALVIEW_PBA8_DMC_BASE			0x100E0000	/* DMC configuration */
 #define REALVIEW_PBA8_SMC_BASE			0x100E1000	/* SMC configuration */
 #define REALVIEW_PBA8_CAN_BASE			0x100E2000	/* CAN bus */
 #define REALVIEW_PBA8_GIC_CPU_BASE		0x1E000000	/* Generic interrupt controller CPU interface */
 #define REALVIEW_PBA8_FLASH0_BASE		0x40000000
 #define REALVIEW_PBA8_FLASH0_SIZE		SZ_64M
 #define REALVIEW_PBA8_FLASH1_BASE		0x44000000
 #define REALVIEW_PBA8_FLASH1_SIZE		SZ_64M
 #define REALVIEW_PBA8_ETH_BASE			0x4E000000	/* Ethernet */
 #define REALVIEW_PBA8_USB_BASE			0x4F000000	/* USB */
 #define REALVIEW_PBA8_GIC_DIST_BASE		0x1E001000	/* Generic interrupt controller distributor */
 #define REALVIEW_PBA8_LT_BASE			0xC0000000	/* Logic Tile expansion */
 #define REALVIEW_PBA8_SDRAM6_BASE		0x70000000	/* SDRAM bank 6 256MB */
 #define REALVIEW_PBA8_SDRAM7_BASE		0x80000000	/* SDRAM bank 7 256MB */

 #define REALVIEW_PBA8_SYS_PLD_CTRL1		0x74

 /*
  * PBA8 PCI regions
  */
 #define REALVIEW_PBA8_PCI_BASE			0x90040000	/* PCI-X Unit base */
 #define REALVIEW_PBA8_PCI_IO_BASE		0x90050000	/* IO Region on AHB */
 #define REALVIEW_PBA8_PCI_MEM_BASE		0xA0000000	/* MEM Region on AHB */

 #define REALVIEW_PBA8_PCI_BASE_SIZE		0x10000		/* 16 Kb */
 #define REALVIEW_PBA8_PCI_IO_SIZE		0x1000		/* 4 Kb */
 #define REALVIEW_PBA8_PCI_MEM_SIZE		0x20000000	/* 512 MB */

 /*
  * Irqs
  */
 #define IRQ_PBA8_GIC_START			32

 /* L220
 #define IRQ_PBA8_L220_EVENT	(IRQ_PBA8_GIC_START + 29)
 #define IRQ_PBA8_L220_SLAVE	(IRQ_PBA8_GIC_START + 30)
 #define IRQ_PBA8_L220_DECODE	(IRQ_PBA8_GIC_START + 31)
 */

 /*
  * PB-A8 on-board gic irq sources
  */
 #define IRQ_PBA8_WATCHDOG	(IRQ_PBA8_GIC_START + 0)	/* Watchdog timer */
 #define IRQ_PBA8_SOFT		(IRQ_PBA8_GIC_START + 1)	/* Software interrupt */
 #define IRQ_PBA8_COMMRx		(IRQ_PBA8_GIC_START + 2)	/* Debug Comm Rx interrupt */
 #define IRQ_PBA8_COMMTx		(IRQ_PBA8_GIC_START + 3)	/* Debug Comm Tx interrupt */
 #define IRQ_PBA8_TIMER0_1	(IRQ_PBA8_GIC_START + 4)	/* Timer 0/1 (default timer) */
 #define IRQ_PBA8_TIMER2_3	(IRQ_PBA8_GIC_START + 5)	/* Timer 2/3 */
 #define IRQ_PBA8_GPIO0		(IRQ_PBA8_GIC_START + 6)	/* GPIO 0 */
 #define IRQ_PBA8_GPIO1		(IRQ_PBA8_GIC_START + 7)	/* GPIO 1 */
 #define IRQ_PBA8_GPIO2		(IRQ_PBA8_GIC_START + 8)	/* GPIO 2 */
 								/* 9 reserved */
 #define IRQ_PBA8_RTC		(IRQ_PBA8_GIC_START + 10)	/* Real Time Clock */
 #define IRQ_PBA8_SSP		(IRQ_PBA8_GIC_START + 11)	/* Synchronous Serial Port */
 #define IRQ_PBA8_UART0		(IRQ_PBA8_GIC_START + 12)	/* UART 0 on development chip */
 #define IRQ_PBA8_UART1		(IRQ_PBA8_GIC_START + 13)	/* UART 1 on development chip */
 #define IRQ_PBA8_UART2		(IRQ_PBA8_GIC_START + 14)	/* UART 2 on development chip */
 #define IRQ_PBA8_UART3		(IRQ_PBA8_GIC_START + 15)	/* UART 3 on development chip */
 #define IRQ_PBA8_SCI		(IRQ_PBA8_GIC_START + 16)	/* Smart Card Interface */
 #define IRQ_PBA8_MMCI0A		(IRQ_PBA8_GIC_START + 17)	/* Multimedia Card 0A */
 #define IRQ_PBA8_MMCI0B		(IRQ_PBA8_GIC_START + 18)	/* Multimedia Card 0B */
 #define IRQ_PBA8_AACI		(IRQ_PBA8_GIC_START + 19)	/* Audio Codec */
 #define IRQ_PBA8_KMI0		(IRQ_PBA8_GIC_START + 20)	/* Keyboard/Mouse port 0 */
 #define IRQ_PBA8_KMI1		(IRQ_PBA8_GIC_START + 21)	/* Keyboard/Mouse port 1 */
 #define IRQ_PBA8_CHARLCD	(IRQ_PBA8_GIC_START + 22)	/* Character LCD */
 #define IRQ_PBA8_CLCD		(IRQ_PBA8_GIC_START + 23)	/* CLCD controller */
 #define IRQ_PBA8_DMAC		(IRQ_PBA8_GIC_START + 24)	/* DMA controller */
 #define IRQ_PBA8_PWRFAIL	(IRQ_PBA8_GIC_START + 25)	/* Power failure */
 #define IRQ_PBA8_PISMO		(IRQ_PBA8_GIC_START + 26)	/* PISMO interface */
 #define IRQ_PBA8_DoC		(IRQ_PBA8_GIC_START + 27)	/* Disk on Chip memory controller */
 #define IRQ_PBA8_ETH		(IRQ_PBA8_GIC_START + 28)	/* Ethernet controller */
 #define IRQ_PBA8_USB		(IRQ_PBA8_GIC_START + 29)	/* USB controller */
 #define IRQ_PBA8_TSPEN		(IRQ_PBA8_GIC_START + 30)	/* Touchscreen pen */
 #define IRQ_PBA8_TSKPAD		(IRQ_PBA8_GIC_START + 31)	/* Touchscreen keypad */

 /* ... */
 #define IRQ_PBA8_PCI0		(IRQ_PBA8_GIC_START + 50)
 #define IRQ_PBA8_PCI1		(IRQ_PBA8_GIC_START + 51)
 #define IRQ_PBA8_PCI2		(IRQ_PBA8_GIC_START + 52)
 #define IRQ_PBA8_PCI3		(IRQ_PBA8_GIC_START + 53)

 #define IRQ_PBA8_SMC		-1
 #define IRQ_PBA8_SCTL		-1

 #define NR_GIC_PBA8		1

 /*
  * Only define NR_IRQS if less than NR_IRQS_PBA8
  */
 #define NR_IRQS_PBA8		(IRQ_PBA8_GIC_START + 64)

 #if defined(CONFIG_MACH_REALVIEW_PBA8)

 #if !defined(NR_IRQS) || (NR_IRQS < NR_IRQS_PBA8)
 #undef NR_IRQS
 #define NR_IRQS			NR_IRQS_PBA8
 #endif

 #if !defined(MAX_GIC_NR) || (MAX_GIC_NR < NR_GIC_PBA8)
 #undef MAX_GIC_NR
 #define MAX_GIC_NR		NR_GIC_PBA8
 #endif

 #endif	/* CONFIG_MACH_REALVIEW_PBA8 */

 #endif	/* __ASM_ARCH_BOARD_PBA8_H */
	/*
	* include/asm-arm/arch-realview/board-pba8.h
	*
	* Copyright (C) 2008 ARM Limited
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License version 2 as
	* published by the Free Software Foundation.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
	* MA 02110-1301, USA.
	*/

	#ifndef __ASM_ARCH_BOARD_PBA8_H
	#define __ASM_ARCH_BOARD_PBA8_H

	#include <mach/platform.h>

	/*
	* Peripheral addresses
	*/
	#define REALVIEW_PBA8_UART0_BASE 0x10009000 /* UART 0 */
	#define REALVIEW_PBA8_UART1_BASE 0x1000A000 /* UART 1 */
	#define REALVIEW_PBA8_UART2_BASE 0x1000B000 /* UART 2 */
	#define REALVIEW_PBA8_UART3_BASE 0x1000C000 /* UART 3 */
	#define REALVIEW_PBA8_SSP_BASE 0x1000D000 /* Synchronous Serial Port */
	#define REALVIEW_PBA8_WATCHDOG0_BASE 0x1000F000 /* Watchdog 0 */
	#define REALVIEW_PBA8_WATCHDOG_BASE 0x10010000 /* watchdog interface */
	#define REALVIEW_PBA8_TIMER0_1_BASE 0x10011000 /* Timer 0 and 1 */
	#define REALVIEW_PBA8_TIMER2_3_BASE 0x10012000 /* Timer 2 and 3 */
	#define REALVIEW_PBA8_GPIO0_BASE 0x10013000 /* GPIO port 0 */
	#define REALVIEW_PBA8_RTC_BASE 0x10017000 /* Real Time Clock */
	#define REALVIEW_PBA8_TIMER4_5_BASE 0x10018000 /* Timer 4/5 */
	#define REALVIEW_PBA8_TIMER6_7_BASE 0x10019000 /* Timer 6/7 */
	#define REALVIEW_PBA8_SCTL_BASE 0x1001A000 /* System Controller */
	#define REALVIEW_PBA8_CLCD_BASE 0x10020000 /* CLCD */
	#define REALVIEW_PBA8_ONB_SRAM_BASE 0x10060000 /* On-board SRAM */
	#define REALVIEW_PBA8_DMC_BASE 0x100E0000 /* DMC configuration */
	#define REALVIEW_PBA8_SMC_BASE 0x100E1000 /* SMC configuration */
	#define REALVIEW_PBA8_CAN_BASE 0x100E2000 /* CAN bus */
	#define REALVIEW_PBA8_GIC_CPU_BASE 0x1E000000 /* Generic interrupt controller CPU interface */
	#define REALVIEW_PBA8_FLASH0_BASE 0x40000000
	#define REALVIEW_PBA8_FLASH0_SIZE SZ_64M
	#define REALVIEW_PBA8_FLASH1_BASE 0x44000000
	#define REALVIEW_PBA8_FLASH1_SIZE SZ_64M
	#define REALVIEW_PBA8_ETH_BASE 0x4E000000 /* Ethernet */
	#define REALVIEW_PBA8_USB_BASE 0x4F000000 /* USB */
	#define REALVIEW_PBA8_GIC_DIST_BASE 0x1E001000 /* Generic interrupt controller distributor */
	#define REALVIEW_PBA8_LT_BASE 0xC0000000 /* Logic Tile expansion */
	#define REALVIEW_PBA8_SDRAM6_BASE 0x70000000 /* SDRAM bank 6 256MB */
	#define REALVIEW_PBA8_SDRAM7_BASE 0x80000000 /* SDRAM bank 7 256MB */

	#define REALVIEW_PBA8_SYS_PLD_CTRL1 0x74

	/*
	* PBA8 PCI regions
	*/
	#define REALVIEW_PBA8_PCI_BASE 0x90040000 /* PCI-X Unit base */
	#define REALVIEW_PBA8_PCI_IO_BASE 0x90050000 /* IO Region on AHB */
	#define REALVIEW_PBA8_PCI_MEM_BASE 0xA0000000 /* MEM Region on AHB */

	#define REALVIEW_PBA8_PCI_BASE_SIZE 0x10000 /* 16 Kb */
	#define REALVIEW_PBA8_PCI_IO_SIZE 0x1000 /* 4 Kb */
	#define REALVIEW_PBA8_PCI_MEM_SIZE 0x20000000 /* 512 MB */

	/*
	* Irqs
	*/
	#define IRQ_PBA8_GIC_START 32

	/* L220
	#define IRQ_PBA8_L220_EVENT (IRQ_PBA8_GIC_START + 29)
	#define IRQ_PBA8_L220_SLAVE (IRQ_PBA8_GIC_START + 30)
	#define IRQ_PBA8_L220_DECODE (IRQ_PBA8_GIC_START + 31)
	*/

	/*
	* PB-A8 on-board gic irq sources
	*/
	#define IRQ_PBA8_WATCHDOG (IRQ_PBA8_GIC_START + 0) /* Watchdog timer */
	#define IRQ_PBA8_SOFT (IRQ_PBA8_GIC_START + 1) /* Software interrupt */
	#define IRQ_PBA8_COMMRx (IRQ_PBA8_GIC_START + 2) /* Debug Comm Rx interrupt */
	#define IRQ_PBA8_COMMTx (IRQ_PBA8_GIC_START + 3) /* Debug Comm Tx interrupt */
	#define IRQ_PBA8_TIMER0_1 (IRQ_PBA8_GIC_START + 4) /* Timer 0/1 (default timer) */
	#define IRQ_PBA8_TIMER2_3 (IRQ_PBA8_GIC_START + 5) /* Timer 2/3 */
	#define IRQ_PBA8_GPIO0 (IRQ_PBA8_GIC_START + 6) /* GPIO 0 */
	#define IRQ_PBA8_GPIO1 (IRQ_PBA8_GIC_START + 7) /* GPIO 1 */
	#define IRQ_PBA8_GPIO2 (IRQ_PBA8_GIC_START + 8) /* GPIO 2 */
	/* 9 reserved */
	#define IRQ_PBA8_RTC (IRQ_PBA8_GIC_START + 10) /* Real Time Clock */
	#define IRQ_PBA8_SSP (IRQ_PBA8_GIC_START + 11) /* Synchronous Serial Port */
	#define IRQ_PBA8_UART0 (IRQ_PBA8_GIC_START + 12) /* UART 0 on development chip */
	#define IRQ_PBA8_UART1 (IRQ_PBA8_GIC_START + 13) /* UART 1 on development chip */
	#define IRQ_PBA8_UART2 (IRQ_PBA8_GIC_START + 14) /* UART 2 on development chip */
	#define IRQ_PBA8_UART3 (IRQ_PBA8_GIC_START + 15) /* UART 3 on development chip */
	#define IRQ_PBA8_SCI (IRQ_PBA8_GIC_START + 16) /* Smart Card Interface */
	#define IRQ_PBA8_MMCI0A (IRQ_PBA8_GIC_START + 17) /* Multimedia Card 0A */
	#define IRQ_PBA8_MMCI0B (IRQ_PBA8_GIC_START + 18) /* Multimedia Card 0B */
	#define IRQ_PBA8_AACI (IRQ_PBA8_GIC_START + 19) /* Audio Codec */
	#define IRQ_PBA8_KMI0 (IRQ_PBA8_GIC_START + 20) /* Keyboard/Mouse port 0 */
	#define IRQ_PBA8_KMI1 (IRQ_PBA8_GIC_START + 21) /* Keyboard/Mouse port 1 */
	#define IRQ_PBA8_CHARLCD (IRQ_PBA8_GIC_START + 22) /* Character LCD */
	#define IRQ_PBA8_CLCD (IRQ_PBA8_GIC_START + 23) /* CLCD controller */
	#define IRQ_PBA8_DMAC (IRQ_PBA8_GIC_START + 24) /* DMA controller */
	#define IRQ_PBA8_PWRFAIL (IRQ_PBA8_GIC_START + 25) /* Power failure */
	#define IRQ_PBA8_PISMO (IRQ_PBA8_GIC_START + 26) /* PISMO interface */
	#define IRQ_PBA8_DoC (IRQ_PBA8_GIC_START + 27) /* Disk on Chip memory controller */
	#define IRQ_PBA8_ETH (IRQ_PBA8_GIC_START + 28) /* Ethernet controller */
	#define IRQ_PBA8_USB (IRQ_PBA8_GIC_START + 29) /* USB controller */
	#define IRQ_PBA8_TSPEN (IRQ_PBA8_GIC_START + 30) /* Touchscreen pen */
	#define IRQ_PBA8_TSKPAD (IRQ_PBA8_GIC_START + 31) /* Touchscreen keypad */

	/* ... */
	#define IRQ_PBA8_PCI0 (IRQ_PBA8_GIC_START + 50)
	#define IRQ_PBA8_PCI1 (IRQ_PBA8_GIC_START + 51)
	#define IRQ_PBA8_PCI2 (IRQ_PBA8_GIC_START + 52)
	#define IRQ_PBA8_PCI3 (IRQ_PBA8_GIC_START + 53)

	#define IRQ_PBA8_SMC -1
	#define IRQ_PBA8_SCTL -1

	#define NR_GIC_PBA8 1

	/*
	* Only define NR_IRQS if less than NR_IRQS_PBA8
	*/
	#define NR_IRQS_PBA8 (IRQ_PBA8_GIC_START + 64)

	#if defined(CONFIG_MACH_REALVIEW_PBA8)

	#if !defined(NR_IRQS) \|\| (NR_IRQS < NR_IRQS_PBA8)
	#undef NR_IRQS
	#define NR_IRQS NR_IRQS_PBA8
	#endif

	#if !defined(MAX_GIC_NR) \|\| (MAX_GIC_NR < NR_GIC_PBA8)
	#undef MAX_GIC_NR
	#define MAX_GIC_NR NR_GIC_PBA8
	#endif

	#endif /* CONFIG_MACH_REALVIEW_PBA8 */

	#endif /* __ASM_ARCH_BOARD_PBA8_H */