arch/sparc/Kconfig - maze/linux - Git at Google

 # $Id: config.in,v 1.113 2002/01/24 22:14:44 davem Exp $
 # For a description of the syntax of this configuration file,
 # see Documentation/kbuild/kconfig-language.txt.
 #

 mainmenu "Linux/SPARC Kernel Configuration"

 config MMU
 	bool
 	default y

 config UID16
 	bool
 	default y

 config HIGHMEM
 	bool
 	default y

 config GENERIC_ISA_DMA
 	bool
 	default y

 source "init/Kconfig"

 menu "General machine setup"

 config VT
 	bool
 	select INPUT
 	default y
 	---help---
 	  If you say Y here, you will get support for terminal devices with
 	  display and keyboard devices. These are called "virtual" because you
 	  can run several virtual terminals (also called virtual consoles) on
 	  one physical terminal. This is rather useful, for example one
 	  virtual terminal can collect system messages and warnings, another
 	  one can be used for a text-mode user session, and a third could run
 	  an X session, all in parallel. Switching between virtual terminals
 	  is done with certain key combinations, usually Alt-<function key>.

 	  The setterm command ("man setterm") can be used to change the
 	  properties (such as colors or beeping) of a virtual terminal. The
 	  man page console_codes(4) ("man console_codes") contains the special
 	  character sequences that can be used to change those properties
 	  directly. The fonts used on virtual terminals can be changed with
 	  the setfont ("man setfont") command and the key bindings are defined
 	  with the loadkeys ("man loadkeys") command.

 	  You need at least one virtual terminal device in order to make use
 	  of your keyboard and monitor. Therefore, only people configuring an
 	  embedded system would want to say N here in order to save some
 	  memory; the only way to log into such a system is then via a serial
 	  or network connection.

 	  If unsure, say Y, or else you won't be able to do much with your new
 	  shiny Linux system :-)

 config VT_CONSOLE
 	bool
 	default y
 	---help---
 	  The system console is the device which receives all kernel messages
 	  and warnings and which allows logins in single user mode. If you
 	  answer Y here, a virtual terminal (the device used to interact with
 	  a physical terminal) can be used as system console. This is the most
 	  common mode of operations, so you should say Y here unless you want
 	  the kernel messages be output only to a serial port (in which case
 	  you should say Y to "Console on serial port", below).

 	  If you do say Y here, by default the currently visible virtual
 	  terminal (/dev/tty0) will be used as system console. You can change
 	  that with a kernel command line option such as "console=tty3" which
 	  would use the third virtual terminal as system console. (Try "man
 	  bootparam" or see the documentation of your boot loader (lilo or
 	  loadlin) about how to pass options to the kernel at boot time.)

 	  If unsure, say Y.

 config HW_CONSOLE
 	bool
 	default y

 config SMP
 	bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
 	depends on BROKEN
 	---help---
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, say N. If you have a system with more
 	  than one CPU, say Y.

 	  If you say N here, the kernel will run on single and multiprocessor
 	  machines, but will use only one CPU of a multiprocessor machine. If
 	  you say Y here, the kernel will run on many, but not all,
 	  singleprocessor machines. On a singleprocessor machine, the kernel
 	  will run faster if you say N here.

 	  People using multiprocessor machines who say Y here should also say
 	  Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
 	  Management" code will be disabled if you say Y here.

 	  See also the <file:Documentation/smp.txt>,
 	  <file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
 	  <http://www.tldp.org/docs.html#howto>.

 	  If you don't know what to do here, say N.

 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
 	depends on SMP
 	default "32"

 # Identify this as a Sparc32 build
 config SPARC32
 	bool
 	default y
 	help
 	  SPARC is a family of RISC microprocessors designed and marketed by
 	  Sun Microsystems, incorporated.  They are very widely found in Sun
 	  workstations and clones. This port covers the original 32-bit SPARC;
 	  it is old and stable and usually considered one of the "big three"
 	  along with the Intel and Alpha ports.  The UltraLinux project
 	  maintains both the SPARC32 and SPARC64 ports; its web page is
 	  available at <http://www.ultralinux.org/>.

 # Global things across all Sun machines.
 config ISA
 	bool
 	help
 	  ISA is found on Espresso only and is not supported currently.
 	  Say N

 config EISA
 	bool
 	help
 	  EISA is not supported.
 	  Say N

 config MCA
 	bool
 	help
 	  MCA is not supported.
 	  Say N

 config PCMCIA
 	tristate
 	---help---
 	  Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
 	  computer.  These are credit-card size devices such as network cards,
 	  modems or hard drives often used with laptops computers.  There are
 	  actually two varieties of these cards: the older 16 bit PCMCIA cards
 	  and the newer 32 bit CardBus cards.  If you want to use CardBus
 	  cards, you need to say Y here and also to "CardBus support" below.

 	  To use your PC-cards, you will need supporting software from David
 	  Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
 	  for location).  Please also read the PCMCIA-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.

 	  To compile this driver as modules, choose M here: the
 	  modules will be called pcmcia_core and ds.

 config SBUS
 	bool
 	default y

 config SBUSCHAR
 	bool
 	default y

 config SERIAL_CONSOLE
 	bool
 	default y
 	---help---
 	  If you say Y here, it will be possible to use a serial port as the
 	  system console (the system console is the device which receives all
 	  kernel messages and warnings and which allows logins in single user
 	  mode). This could be useful if some terminal or printer is connected
 	  to that serial port.

 	  Even if you say Y here, the currently visible virtual console
 	  (/dev/tty0) will still be used as the system console by default, but
 	  you can alter that using a kernel command line option such as
 	  "console=ttyS1". (Try "man bootparam" or see the documentation of
 	  your boot loader (silo) about how to pass options to the kernel at
 	  boot time.)

 	  If you don't have a graphics card installed and you say Y here, the
 	  kernel will automatically use the first serial line, /dev/ttyS0, as
 	  system console.

 	  If unsure, say N.

 config SUN_AUXIO
 	bool
 	default y

 config SUN_IO
 	bool
 	default y

 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y

 config RWSEM_XCHGADD_ALGORITHM
 	bool

 config GENERIC_CALIBRATE_DELAY
 	bool
 	default y

 config SUN_PM
 	bool
 	default y
 	help
 	  Enable power management and CPU standby features on supported
 	  SPARC platforms.

 config SUN4
 	bool "Support for SUN4 machines (disables SUN4[CDM] support)"
 	depends on !SMP
 	default n
 	help
 	  Say Y here if, and only if, your machine is a sun4. Note that
 	  a kernel compiled with this option will run only on sun4.
 	  (And the current version will probably work only on sun4/330.)

 if !SUN4

 config PCI
 	bool "Support for PCI and PS/2 keyboard/mouse"
 	help
 	  CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
 	  CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
 	  All of these platforms are extremely obscure, so say N if unsure.

 source "drivers/pci/Kconfig"

 endif

 config SUN_OPENPROMFS
 	tristate "Openprom tree appears in /proc/openprom"
 	help
 	  If you say Y, the OpenPROM device tree will be available as a
 	  virtual file system, which you can mount to /proc/openprom by "mount
 	  -t openpromfs none /proc/openprom".

 	  To compile the /proc/openprom support as a module, choose M here: the
 	  module will be called openpromfs.

 	  Only choose N if you know in advance that you will not need to modify
 	  OpenPROM settings on the running system.

 source "fs/Kconfig.binfmt"

 config SUNOS_EMUL
 	bool "SunOS binary emulation"
 	help
 	  This allows you to run most SunOS binaries.  If you want to do this,
 	  say Y here and place appropriate files in /usr/gnemul/sunos. See
 	  <http://www.ultralinux.org/faq.html> for more information.  If you
 	  want to run SunOS binaries on an Ultra you must also say Y to
 	  "Kernel support for 32-bit a.out binaries" above.

 source "drivers/parport/Kconfig"

 config PRINTER
 	tristate "Parallel printer support"
 	depends on PARPORT
 	---help---
 	  If you intend to attach a printer to the parallel port of your Linux
 	  box (as opposed to using a serial printer; if the connector at the
 	  printer has 9 or 25 holes ["female"], then it's serial), say Y.
 	  Also read the Printing-HOWTO, available from
 	  <http://www.tldp.org/docs.html#howto>.

 	  It is possible to share one parallel port among several devices
 	  (e.g. printer and ZIP drive) and it is safe to compile the
 	  corresponding drivers into the kernel.  If you want to compile this
 	  driver as a module however, choose M here and read
 	  <file:Documentation/parport.txt>.  The module will be called lp.

 	  If you have several parallel ports, you can specify which ports to
 	  use with the "lp" kernel command line option.  (Try "man bootparam"
 	  or see the documentation of your boot loader (silo) about how to pass
 	  options to the kernel at boot time.)  The syntax of the "lp" command
 	  line option can be found in <file:drivers/char/lp.c>.

 	  If you have more than 8 printers, you need to increase the LP_NO
 	  macro in lp.c and the PARPORT_MAX macro in parport.h.

 source "mm/Kconfig"

 endmenu

 source "drivers/base/Kconfig"

 source "drivers/video/Kconfig"

 source "drivers/mtd/Kconfig"

 source "drivers/serial/Kconfig"

 if !SUN4
 source "drivers/sbus/char/Kconfig"
 endif

 source "drivers/block/Kconfig"

 # Don't frighten a common SBus user
 if PCI

 source "drivers/ide/Kconfig"

 endif

 source "drivers/isdn/Kconfig"

 source "drivers/scsi/Kconfig"

 source "drivers/fc4/Kconfig"

 source "drivers/md/Kconfig"

 source "net/Kconfig"

 # This one must be before the filesystem configs. -DaveM

 menu "Unix98 PTY support"

 config UNIX98_PTYS
 	bool "Unix98 PTY support"
 	---help---
 	  A pseudo terminal (PTY) is a software device consisting of two
 	  halves: a master and a slave. The slave device behaves identical to
 	  a physical terminal; the master device is used by a process to
 	  read data from and write data to the slave, thereby emulating a
 	  terminal. Typical programs for the master side are telnet servers
 	  and xterms.

 	  Linux has traditionally used the BSD-like names /dev/ptyxx for
 	  masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
 	  has a number of problems. The GNU C library glibc 2.1 and later,
 	  however, supports the Unix98 naming standard: in order to acquire a
 	  pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
 	  terminal is then made available to the process and the pseudo
 	  terminal slave can be accessed as /dev/pts/<number>. What was
 	  traditionally /dev/ttyp2 will then be /dev/pts/2, for example.

 	  The entries in /dev/pts/ are created on the fly by a virtual
 	  file system; therefore, if you say Y here you should say Y to
 	  "/dev/pts file system for Unix98 PTYs" as well.

 	  If you want to say Y here, you need to have the C library glibc 2.1
 	  or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
 	  Read the instructions in <file:Documentation/Changes> pertaining to
 	  pseudo terminals. It's safe to say N.

 config UNIX98_PTY_COUNT
 	int "Maximum number of Unix98 PTYs in use (0-2048)"
 	depends on UNIX98_PTYS
 	default "256"
 	help
 	  The maximum number of Unix98 PTYs that can be used at any one time.
 	  The default is 256, and should be enough for desktop systems. Server
 	  machines which support incoming telnet/rlogin/ssh connections and/or
 	  serve several X terminals may want to increase this: every incoming
 	  connection and every xterm uses up one PTY.

 	  When not in use, each additional set of 256 PTYs occupy
 	  approximately 8 KB of kernel memory on 32-bit architectures.

 endmenu

 source "drivers/input/Kconfig"

 source "fs/Kconfig"

 source "sound/Kconfig"

 source "drivers/usb/Kconfig"

 source "drivers/infiniband/Kconfig"

 source "drivers/char/watchdog/Kconfig"

 source "arch/sparc/Kconfig.debug"

 source "security/Kconfig"

 source "crypto/Kconfig"

 source "lib/Kconfig"
	# $Id: config.in,v 1.113 2002/01/24 22:14:44 davem Exp $
	# For a description of the syntax of this configuration file,
	# see Documentation/kbuild/kconfig-language.txt.
	#

	mainmenu "Linux/SPARC Kernel Configuration"

	config MMU
	bool
	default y

	config UID16
	bool
	default y

	config HIGHMEM
	bool
	default y

	config GENERIC_ISA_DMA
	bool
	default y

	source "init/Kconfig"

	menu "General machine setup"

	config VT
	bool
	select INPUT
	default y
	---help---
	If you say Y here, you will get support for terminal devices with
	display and keyboard devices. These are called "virtual" because you
	can run several virtual terminals (also called virtual consoles) on
	one physical terminal. This is rather useful, for example one
	virtual terminal can collect system messages and warnings, another
	one can be used for a text-mode user session, and a third could run
	an X session, all in parallel. Switching between virtual terminals
	is done with certain key combinations, usually Alt-<function key>.

	The setterm command ("man setterm") can be used to change the
	properties (such as colors or beeping) of a virtual terminal. The
	man page console_codes(4) ("man console_codes") contains the special
	character sequences that can be used to change those properties
	directly. The fonts used on virtual terminals can be changed with
	the setfont ("man setfont") command and the key bindings are defined
	with the loadkeys ("man loadkeys") command.

	You need at least one virtual terminal device in order to make use
	of your keyboard and monitor. Therefore, only people configuring an
	embedded system would want to say N here in order to save some
	memory; the only way to log into such a system is then via a serial
	or network connection.

	If unsure, say Y, or else you won't be able to do much with your new
	shiny Linux system :-)

	config VT_CONSOLE
	bool
	default y
	---help---
	The system console is the device which receives all kernel messages
	and warnings and which allows logins in single user mode. If you
	answer Y here, a virtual terminal (the device used to interact with
	a physical terminal) can be used as system console. This is the most
	common mode of operations, so you should say Y here unless you want
	the kernel messages be output only to a serial port (in which case
	you should say Y to "Console on serial port", below).

	If you do say Y here, by default the currently visible virtual
	terminal (/dev/tty0) will be used as system console. You can change
	that with a kernel command line option such as "console=tty3" which
	would use the third virtual terminal as system console. (Try "man
	bootparam" or see the documentation of your boot loader (lilo or
	loadlin) about how to pass options to the kernel at boot time.)

	If unsure, say Y.

	config HW_CONSOLE
	bool
	default y

	config SMP
	bool "Symmetric multi-processing support (does not work on sun4/sun4c)"
	depends on BROKEN
	---help---
	This enables support for systems with more than one CPU. If you have
	a system with only one CPU, say N. If you have a system with more
	than one CPU, say Y.

	If you say N here, the kernel will run on single and multiprocessor
	machines, but will use only one CPU of a multiprocessor machine. If
	you say Y here, the kernel will run on many, but not all,
	singleprocessor machines. On a singleprocessor machine, the kernel
	will run faster if you say N here.

	People using multiprocessor machines who say Y here should also say
	Y to "Enhanced Real Time Clock Support", below. The "Advanced Power
	Management" code will be disabled if you say Y here.

	See also the <file:Documentation/smp.txt>,
	<file:Documentation/nmi_watchdog.txt> and the SMP-HOWTO available at
	<http://www.tldp.org/docs.html#howto>.

	If you don't know what to do here, say N.

	config NR_CPUS
	int "Maximum number of CPUs (2-32)"
	range 2 32
	depends on SMP
	default "32"

	# Identify this as a Sparc32 build
	config SPARC32
	bool
	default y
	help
	SPARC is a family of RISC microprocessors designed and marketed by
	Sun Microsystems, incorporated. They are very widely found in Sun
	workstations and clones. This port covers the original 32-bit SPARC;
	it is old and stable and usually considered one of the "big three"
	along with the Intel and Alpha ports. The UltraLinux project
	maintains both the SPARC32 and SPARC64 ports; its web page is
	available at <http://www.ultralinux.org/>.

	# Global things across all Sun machines.
	config ISA
	bool
	help
	ISA is found on Espresso only and is not supported currently.
	Say N

	config EISA
	bool
	help
	EISA is not supported.
	Say N

	config MCA
	bool
	help
	MCA is not supported.
	Say N

	config PCMCIA
	tristate
	---help---
	Say Y here if you want to attach PCMCIA- or PC-cards to your Linux
	computer. These are credit-card size devices such as network cards,
	modems or hard drives often used with laptops computers. There are
	actually two varieties of these cards: the older 16 bit PCMCIA cards
	and the newer 32 bit CardBus cards. If you want to use CardBus
	cards, you need to say Y here and also to "CardBus support" below.

	To use your PC-cards, you will need supporting software from David
	Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
	for location). Please also read the PCMCIA-HOWTO, available from
	<http://www.tldp.org/docs.html#howto>.

	To compile this driver as modules, choose M here: the
	modules will be called pcmcia_core and ds.

	config SBUS
	bool
	default y

	config SBUSCHAR
	bool
	default y

	config SERIAL_CONSOLE
	bool
	default y
	---help---
	If you say Y here, it will be possible to use a serial port as the
	system console (the system console is the device which receives all
	kernel messages and warnings and which allows logins in single user
	mode). This could be useful if some terminal or printer is connected
	to that serial port.

	Even if you say Y here, the currently visible virtual console
	(/dev/tty0) will still be used as the system console by default, but
	you can alter that using a kernel command line option such as
	"console=ttyS1". (Try "man bootparam" or see the documentation of
	your boot loader (silo) about how to pass options to the kernel at
	boot time.)

	If you don't have a graphics card installed and you say Y here, the
	kernel will automatically use the first serial line, /dev/ttyS0, as
	system console.

	If unsure, say N.

	config SUN_AUXIO
	bool
	default y

	config SUN_IO
	bool
	default y

	config RWSEM_GENERIC_SPINLOCK
	bool
	default y

	config RWSEM_XCHGADD_ALGORITHM
	bool

	config GENERIC_CALIBRATE_DELAY
	bool
	default y

	config SUN_PM
	bool
	default y
	help
	Enable power management and CPU standby features on supported
	SPARC platforms.

	config SUN4
	bool "Support for SUN4 machines (disables SUN4[CDM] support)"
	depends on !SMP
	default n
	help
	Say Y here if, and only if, your machine is a sun4. Note that
	a kernel compiled with this option will run only on sun4.
	(And the current version will probably work only on sun4/330.)

	if !SUN4

	config PCI
	bool "Support for PCI and PS/2 keyboard/mouse"
	help
	CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
	CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
	All of these platforms are extremely obscure, so say N if unsure.

	source "drivers/pci/Kconfig"

	endif

	config SUN_OPENPROMFS
	tristate "Openprom tree appears in /proc/openprom"
	help
	If you say Y, the OpenPROM device tree will be available as a
	virtual file system, which you can mount to /proc/openprom by "mount
	-t openpromfs none /proc/openprom".

	To compile the /proc/openprom support as a module, choose M here: the
	module will be called openpromfs.

	Only choose N if you know in advance that you will not need to modify
	OpenPROM settings on the running system.

	source "fs/Kconfig.binfmt"

	config SUNOS_EMUL
	bool "SunOS binary emulation"
	help
	This allows you to run most SunOS binaries. If you want to do this,
	say Y here and place appropriate files in /usr/gnemul/sunos. See
	<http://www.ultralinux.org/faq.html> for more information. If you
	want to run SunOS binaries on an Ultra you must also say Y to
	"Kernel support for 32-bit a.out binaries" above.

	source "drivers/parport/Kconfig"

	config PRINTER
	tristate "Parallel printer support"
	depends on PARPORT
	---help---
	If you intend to attach a printer to the parallel port of your Linux
	box (as opposed to using a serial printer; if the connector at the
	printer has 9 or 25 holes ["female"], then it's serial), say Y.
	Also read the Printing-HOWTO, available from
	<http://www.tldp.org/docs.html#howto>.

	It is possible to share one parallel port among several devices
	(e.g. printer and ZIP drive) and it is safe to compile the
	corresponding drivers into the kernel. If you want to compile this
	driver as a module however, choose M here and read
	<file:Documentation/parport.txt>. The module will be called lp.

	If you have several parallel ports, you can specify which ports to
	use with the "lp" kernel command line option. (Try "man bootparam"
	or see the documentation of your boot loader (silo) about how to pass
	options to the kernel at boot time.) The syntax of the "lp" command
	line option can be found in <file:drivers/char/lp.c>.

	If you have more than 8 printers, you need to increase the LP_NO
	macro in lp.c and the PARPORT_MAX macro in parport.h.

	source "mm/Kconfig"

	endmenu

	source "drivers/base/Kconfig"

	source "drivers/video/Kconfig"

	source "drivers/mtd/Kconfig"

	source "drivers/serial/Kconfig"

	if !SUN4
	source "drivers/sbus/char/Kconfig"
	endif

	source "drivers/block/Kconfig"

	# Don't frighten a common SBus user
	if PCI

	source "drivers/ide/Kconfig"

	endif

	source "drivers/isdn/Kconfig"

	source "drivers/scsi/Kconfig"

	source "drivers/fc4/Kconfig"

	source "drivers/md/Kconfig"

	source "net/Kconfig"

	# This one must be before the filesystem configs. -DaveM

	menu "Unix98 PTY support"

	config UNIX98_PTYS
	bool "Unix98 PTY support"
	---help---
	A pseudo terminal (PTY) is a software device consisting of two
	halves: a master and a slave. The slave device behaves identical to
	a physical terminal; the master device is used by a process to
	read data from and write data to the slave, thereby emulating a
	terminal. Typical programs for the master side are telnet servers
	and xterms.

	Linux has traditionally used the BSD-like names /dev/ptyxx for
	masters and /dev/ttyxx for slaves of pseudo terminals. This scheme
	has a number of problems. The GNU C library glibc 2.1 and later,
	however, supports the Unix98 naming standard: in order to acquire a
	pseudo terminal, a process opens /dev/ptmx; the number of the pseudo
	terminal is then made available to the process and the pseudo
	terminal slave can be accessed as /dev/pts/<number>. What was
	traditionally /dev/ttyp2 will then be /dev/pts/2, for example.

	The entries in /dev/pts/ are created on the fly by a virtual
	file system; therefore, if you say Y here you should say Y to
	"/dev/pts file system for Unix98 PTYs" as well.

	If you want to say Y here, you need to have the C library glibc 2.1
	or later (equal to libc-6.1, check with "ls -l /lib/libc.so.*").
	Read the instructions in <file:Documentation/Changes> pertaining to
	pseudo terminals. It's safe to say N.

	config UNIX98_PTY_COUNT
	int "Maximum number of Unix98 PTYs in use (0-2048)"
	depends on UNIX98_PTYS
	default "256"
	help
	The maximum number of Unix98 PTYs that can be used at any one time.
	The default is 256, and should be enough for desktop systems. Server
	machines which support incoming telnet/rlogin/ssh connections and/or
	serve several X terminals may want to increase this: every incoming
	connection and every xterm uses up one PTY.

	When not in use, each additional set of 256 PTYs occupy
	approximately 8 KB of kernel memory on 32-bit architectures.

	endmenu

	source "drivers/input/Kconfig"

	source "fs/Kconfig"

	source "sound/Kconfig"

	source "drivers/usb/Kconfig"

	source "drivers/infiniband/Kconfig"

	source "drivers/char/watchdog/Kconfig"

	source "arch/sparc/Kconfig.debug"

	source "security/Kconfig"

	source "crypto/Kconfig"

	source "lib/Kconfig"