| /* |
| * rtc-twl.c -- TWL Real Time Clock interface |
| * |
| * Copyright (C) 2007 MontaVista Software, Inc |
| * Author: Alexandre Rusev <source@mvista.com> |
| * |
| * Based on original TI driver twl4030-rtc.c |
| * Copyright (C) 2006 Texas Instruments, Inc. |
| * |
| * Based on rtc-omap.c |
| * Copyright (C) 2003 MontaVista Software, Inc. |
| * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com> |
| * Copyright (C) 2006 David Brownell |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/errno.h> |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/rtc.h> |
| #include <linux/bcd.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| |
| #include <linux/i2c/twl.h> |
| |
| |
| /* |
| * RTC block register offsets (use TWL_MODULE_RTC) |
| */ |
| enum { |
| REG_SECONDS_REG = 0, |
| REG_MINUTES_REG, |
| REG_HOURS_REG, |
| REG_DAYS_REG, |
| REG_MONTHS_REG, |
| REG_YEARS_REG, |
| REG_WEEKS_REG, |
| |
| REG_ALARM_SECONDS_REG, |
| REG_ALARM_MINUTES_REG, |
| REG_ALARM_HOURS_REG, |
| REG_ALARM_DAYS_REG, |
| REG_ALARM_MONTHS_REG, |
| REG_ALARM_YEARS_REG, |
| |
| REG_RTC_CTRL_REG, |
| REG_RTC_STATUS_REG, |
| REG_RTC_INTERRUPTS_REG, |
| |
| REG_RTC_COMP_LSB_REG, |
| REG_RTC_COMP_MSB_REG, |
| }; |
| static const u8 twl4030_rtc_reg_map[] = { |
| [REG_SECONDS_REG] = 0x00, |
| [REG_MINUTES_REG] = 0x01, |
| [REG_HOURS_REG] = 0x02, |
| [REG_DAYS_REG] = 0x03, |
| [REG_MONTHS_REG] = 0x04, |
| [REG_YEARS_REG] = 0x05, |
| [REG_WEEKS_REG] = 0x06, |
| |
| [REG_ALARM_SECONDS_REG] = 0x07, |
| [REG_ALARM_MINUTES_REG] = 0x08, |
| [REG_ALARM_HOURS_REG] = 0x09, |
| [REG_ALARM_DAYS_REG] = 0x0A, |
| [REG_ALARM_MONTHS_REG] = 0x0B, |
| [REG_ALARM_YEARS_REG] = 0x0C, |
| |
| [REG_RTC_CTRL_REG] = 0x0D, |
| [REG_RTC_STATUS_REG] = 0x0E, |
| [REG_RTC_INTERRUPTS_REG] = 0x0F, |
| |
| [REG_RTC_COMP_LSB_REG] = 0x10, |
| [REG_RTC_COMP_MSB_REG] = 0x11, |
| }; |
| static const u8 twl6030_rtc_reg_map[] = { |
| [REG_SECONDS_REG] = 0x00, |
| [REG_MINUTES_REG] = 0x01, |
| [REG_HOURS_REG] = 0x02, |
| [REG_DAYS_REG] = 0x03, |
| [REG_MONTHS_REG] = 0x04, |
| [REG_YEARS_REG] = 0x05, |
| [REG_WEEKS_REG] = 0x06, |
| |
| [REG_ALARM_SECONDS_REG] = 0x08, |
| [REG_ALARM_MINUTES_REG] = 0x09, |
| [REG_ALARM_HOURS_REG] = 0x0A, |
| [REG_ALARM_DAYS_REG] = 0x0B, |
| [REG_ALARM_MONTHS_REG] = 0x0C, |
| [REG_ALARM_YEARS_REG] = 0x0D, |
| |
| [REG_RTC_CTRL_REG] = 0x10, |
| [REG_RTC_STATUS_REG] = 0x11, |
| [REG_RTC_INTERRUPTS_REG] = 0x12, |
| |
| [REG_RTC_COMP_LSB_REG] = 0x13, |
| [REG_RTC_COMP_MSB_REG] = 0x14, |
| }; |
| |
| /* RTC_CTRL_REG bitfields */ |
| #define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01 |
| #define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02 |
| #define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04 |
| #define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08 |
| #define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10 |
| #define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20 |
| #define BIT_RTC_CTRL_REG_GET_TIME_M 0x40 |
| #define BIT_RTC_CTRL_REG_RTC_V_OPT 0x80 |
| |
| /* RTC_STATUS_REG bitfields */ |
| #define BIT_RTC_STATUS_REG_RUN_M 0x02 |
| #define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04 |
| #define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08 |
| #define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10 |
| #define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20 |
| #define BIT_RTC_STATUS_REG_ALARM_M 0x40 |
| #define BIT_RTC_STATUS_REG_POWER_UP_M 0x80 |
| |
| /* RTC_INTERRUPTS_REG bitfields */ |
| #define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03 |
| #define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04 |
| #define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08 |
| |
| |
| /* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */ |
| #define ALL_TIME_REGS 6 |
| |
| /*----------------------------------------------------------------------*/ |
| static u8 *rtc_reg_map; |
| |
| /* |
| * Supports 1 byte read from TWL RTC register. |
| */ |
| static int twl_rtc_read_u8(u8 *data, u8 reg) |
| { |
| int ret; |
| |
| ret = twl_i2c_read_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg])); |
| if (ret < 0) |
| pr_err("twl_rtc: Could not read TWL" |
| "register %X - error %d\n", reg, ret); |
| return ret; |
| } |
| |
| /* |
| * Supports 1 byte write to TWL RTC registers. |
| */ |
| static int twl_rtc_write_u8(u8 data, u8 reg) |
| { |
| int ret; |
| |
| ret = twl_i2c_write_u8(TWL_MODULE_RTC, data, (rtc_reg_map[reg])); |
| if (ret < 0) |
| pr_err("twl_rtc: Could not write TWL" |
| "register %X - error %d\n", reg, ret); |
| return ret; |
| } |
| |
| /* |
| * Cache the value for timer/alarm interrupts register; this is |
| * only changed by callers holding rtc ops lock (or resume). |
| */ |
| static unsigned char rtc_irq_bits; |
| |
| /* |
| * Enable 1/second update and/or alarm interrupts. |
| */ |
| static int set_rtc_irq_bit(unsigned char bit) |
| { |
| unsigned char val; |
| int ret; |
| |
| /* if the bit is set, return from here */ |
| if (rtc_irq_bits & bit) |
| return 0; |
| |
| val = rtc_irq_bits | bit; |
| val &= ~BIT_RTC_INTERRUPTS_REG_EVERY_M; |
| ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); |
| if (ret == 0) |
| rtc_irq_bits = val; |
| |
| return ret; |
| } |
| |
| /* |
| * Disable update and/or alarm interrupts. |
| */ |
| static int mask_rtc_irq_bit(unsigned char bit) |
| { |
| unsigned char val; |
| int ret; |
| |
| /* if the bit is clear, return from here */ |
| if (!(rtc_irq_bits & bit)) |
| return 0; |
| |
| val = rtc_irq_bits & ~bit; |
| ret = twl_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); |
| if (ret == 0) |
| rtc_irq_bits = val; |
| |
| return ret; |
| } |
| |
| static int twl_rtc_alarm_irq_enable(struct device *dev, unsigned enabled) |
| { |
| int ret; |
| |
| if (enabled) |
| ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); |
| else |
| ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); |
| |
| return ret; |
| } |
| |
| /* |
| * Gets current TWL RTC time and date parameters. |
| * |
| * The RTC's time/alarm representation is not what gmtime(3) requires |
| * Linux to use: |
| * |
| * - Months are 1..12 vs Linux 0-11 |
| * - Years are 0..99 vs Linux 1900..N (we assume 21st century) |
| */ |
| static int twl_rtc_read_time(struct device *dev, struct rtc_time *tm) |
| { |
| unsigned char rtc_data[ALL_TIME_REGS + 1]; |
| int ret; |
| u8 save_control; |
| u8 rtc_control; |
| |
| ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); |
| if (ret < 0) { |
| dev_err(dev, "%s: reading CTRL_REG, error %d\n", __func__, ret); |
| return ret; |
| } |
| /* for twl6030/32 make sure BIT_RTC_CTRL_REG_GET_TIME_M is clear */ |
| if (twl_class_is_6030()) { |
| if (save_control & BIT_RTC_CTRL_REG_GET_TIME_M) { |
| save_control &= ~BIT_RTC_CTRL_REG_GET_TIME_M; |
| ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); |
| if (ret < 0) { |
| dev_err(dev, "%s clr GET_TIME, error %d\n", |
| __func__, ret); |
| return ret; |
| } |
| } |
| } |
| |
| /* Copy RTC counting registers to static registers or latches */ |
| rtc_control = save_control | BIT_RTC_CTRL_REG_GET_TIME_M; |
| |
| /* for twl6030/32 enable read access to static shadowed registers */ |
| if (twl_class_is_6030()) |
| rtc_control |= BIT_RTC_CTRL_REG_RTC_V_OPT; |
| |
| ret = twl_rtc_write_u8(rtc_control, REG_RTC_CTRL_REG); |
| if (ret < 0) { |
| dev_err(dev, "%s: writing CTRL_REG, error %d\n", __func__, ret); |
| return ret; |
| } |
| |
| ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data, |
| (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS); |
| |
| if (ret < 0) { |
| dev_err(dev, "%s: reading data, error %d\n", __func__, ret); |
| return ret; |
| } |
| |
| /* for twl6030 restore original state of rtc control register */ |
| if (twl_class_is_6030()) { |
| ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); |
| if (ret < 0) { |
| dev_err(dev, "%s: restore CTRL_REG, error %d\n", |
| __func__, ret); |
| return ret; |
| } |
| } |
| |
| tm->tm_sec = bcd2bin(rtc_data[0]); |
| tm->tm_min = bcd2bin(rtc_data[1]); |
| tm->tm_hour = bcd2bin(rtc_data[2]); |
| tm->tm_mday = bcd2bin(rtc_data[3]); |
| tm->tm_mon = bcd2bin(rtc_data[4]) - 1; |
| tm->tm_year = bcd2bin(rtc_data[5]) + 100; |
| |
| return ret; |
| } |
| |
| static int twl_rtc_set_time(struct device *dev, struct rtc_time *tm) |
| { |
| unsigned char save_control; |
| unsigned char rtc_data[ALL_TIME_REGS + 1]; |
| int ret; |
| |
| rtc_data[1] = bin2bcd(tm->tm_sec); |
| rtc_data[2] = bin2bcd(tm->tm_min); |
| rtc_data[3] = bin2bcd(tm->tm_hour); |
| rtc_data[4] = bin2bcd(tm->tm_mday); |
| rtc_data[5] = bin2bcd(tm->tm_mon + 1); |
| rtc_data[6] = bin2bcd(tm->tm_year - 100); |
| |
| /* Stop RTC while updating the TC registers */ |
| ret = twl_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); |
| if (ret < 0) |
| goto out; |
| |
| save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M; |
| ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); |
| if (ret < 0) |
| goto out; |
| |
| /* update all the time registers in one shot */ |
| ret = twl_i2c_write(TWL_MODULE_RTC, rtc_data, |
| (rtc_reg_map[REG_SECONDS_REG]), ALL_TIME_REGS); |
| if (ret < 0) { |
| dev_err(dev, "rtc_set_time error %d\n", ret); |
| goto out; |
| } |
| |
| /* Start back RTC */ |
| save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M; |
| ret = twl_rtc_write_u8(save_control, REG_RTC_CTRL_REG); |
| |
| out: |
| return ret; |
| } |
| |
| /* |
| * Gets current TWL RTC alarm time. |
| */ |
| static int twl_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| { |
| unsigned char rtc_data[ALL_TIME_REGS + 1]; |
| int ret; |
| |
| ret = twl_i2c_read(TWL_MODULE_RTC, rtc_data, |
| (rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS); |
| if (ret < 0) { |
| dev_err(dev, "rtc_read_alarm error %d\n", ret); |
| return ret; |
| } |
| |
| /* some of these fields may be wildcard/"match all" */ |
| alm->time.tm_sec = bcd2bin(rtc_data[0]); |
| alm->time.tm_min = bcd2bin(rtc_data[1]); |
| alm->time.tm_hour = bcd2bin(rtc_data[2]); |
| alm->time.tm_mday = bcd2bin(rtc_data[3]); |
| alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1; |
| alm->time.tm_year = bcd2bin(rtc_data[5]) + 100; |
| |
| /* report cached alarm enable state */ |
| if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) |
| alm->enabled = 1; |
| |
| return ret; |
| } |
| |
| static int twl_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) |
| { |
| unsigned char alarm_data[ALL_TIME_REGS + 1]; |
| int ret; |
| |
| ret = twl_rtc_alarm_irq_enable(dev, 0); |
| if (ret) |
| goto out; |
| |
| alarm_data[1] = bin2bcd(alm->time.tm_sec); |
| alarm_data[2] = bin2bcd(alm->time.tm_min); |
| alarm_data[3] = bin2bcd(alm->time.tm_hour); |
| alarm_data[4] = bin2bcd(alm->time.tm_mday); |
| alarm_data[5] = bin2bcd(alm->time.tm_mon + 1); |
| alarm_data[6] = bin2bcd(alm->time.tm_year - 100); |
| |
| /* update all the alarm registers in one shot */ |
| ret = twl_i2c_write(TWL_MODULE_RTC, alarm_data, |
| (rtc_reg_map[REG_ALARM_SECONDS_REG]), ALL_TIME_REGS); |
| if (ret) { |
| dev_err(dev, "rtc_set_alarm error %d\n", ret); |
| goto out; |
| } |
| |
| if (alm->enabled) |
| ret = twl_rtc_alarm_irq_enable(dev, 1); |
| out: |
| return ret; |
| } |
| |
| static irqreturn_t twl_rtc_interrupt(int irq, void *rtc) |
| { |
| unsigned long events; |
| int ret = IRQ_NONE; |
| int res; |
| u8 rd_reg; |
| |
| res = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); |
| if (res) |
| goto out; |
| /* |
| * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG. |
| * only one (ALARM or RTC) interrupt source may be enabled |
| * at time, we also could check our results |
| * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM] |
| */ |
| if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) |
| events = RTC_IRQF | RTC_AF; |
| else |
| events = RTC_IRQF | RTC_PF; |
| |
| res = twl_rtc_write_u8(BIT_RTC_STATUS_REG_ALARM_M, |
| REG_RTC_STATUS_REG); |
| if (res) |
| goto out; |
| |
| if (twl_class_is_4030()) { |
| /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1 |
| * needs 2 reads to clear the interrupt. One read is done in |
| * do_twl_pwrirq(). Doing the second read, to clear |
| * the bit. |
| * |
| * FIXME the reason PWR_ISR1 needs an extra read is that |
| * RTC_IF retriggered until we cleared REG_ALARM_M above. |
| * But re-reading like this is a bad hack; by doing so we |
| * risk wrongly clearing status for some other IRQ (losing |
| * the interrupt). Be smarter about handling RTC_UF ... |
| */ |
| res = twl_i2c_read_u8(TWL4030_MODULE_INT, |
| &rd_reg, TWL4030_INT_PWR_ISR1); |
| if (res) |
| goto out; |
| } |
| |
| /* Notify RTC core on event */ |
| rtc_update_irq(rtc, 1, events); |
| |
| ret = IRQ_HANDLED; |
| out: |
| return ret; |
| } |
| |
| static struct rtc_class_ops twl_rtc_ops = { |
| .read_time = twl_rtc_read_time, |
| .set_time = twl_rtc_set_time, |
| .read_alarm = twl_rtc_read_alarm, |
| .set_alarm = twl_rtc_set_alarm, |
| .alarm_irq_enable = twl_rtc_alarm_irq_enable, |
| }; |
| |
| /*----------------------------------------------------------------------*/ |
| |
| static int __devinit twl_rtc_probe(struct platform_device *pdev) |
| { |
| struct rtc_device *rtc; |
| int ret = -EINVAL; |
| int irq = platform_get_irq(pdev, 0); |
| u8 rd_reg; |
| |
| if (irq <= 0) |
| goto out1; |
| |
| ret = twl_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); |
| if (ret < 0) |
| goto out1; |
| |
| if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M) |
| dev_warn(&pdev->dev, "Power up reset detected.\n"); |
| |
| if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) |
| dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n"); |
| |
| /* Clear RTC Power up reset and pending alarm interrupts */ |
| ret = twl_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG); |
| if (ret < 0) |
| goto out1; |
| |
| if (twl_class_is_6030()) { |
| twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK, |
| REG_INT_MSK_LINE_A); |
| twl6030_interrupt_unmask(TWL6030_RTC_INT_MASK, |
| REG_INT_MSK_STS_A); |
| } |
| |
| dev_info(&pdev->dev, "Enabling TWL-RTC\n"); |
| ret = twl_rtc_write_u8(BIT_RTC_CTRL_REG_STOP_RTC_M, REG_RTC_CTRL_REG); |
| if (ret < 0) |
| goto out1; |
| |
| /* ensure interrupts are disabled, bootloaders can be strange */ |
| ret = twl_rtc_write_u8(0, REG_RTC_INTERRUPTS_REG); |
| if (ret < 0) |
| dev_warn(&pdev->dev, "unable to disable interrupt\n"); |
| |
| /* init cached IRQ enable bits */ |
| ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); |
| if (ret < 0) |
| goto out1; |
| |
| rtc = rtc_device_register(pdev->name, |
| &pdev->dev, &twl_rtc_ops, THIS_MODULE); |
| if (IS_ERR(rtc)) { |
| ret = PTR_ERR(rtc); |
| dev_err(&pdev->dev, "can't register RTC device, err %ld\n", |
| PTR_ERR(rtc)); |
| goto out1; |
| } |
| |
| ret = request_threaded_irq(irq, NULL, twl_rtc_interrupt, |
| IRQF_TRIGGER_RISING | IRQF_ONESHOT, |
| dev_name(&rtc->dev), rtc); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "IRQ is not free.\n"); |
| goto out2; |
| } |
| |
| platform_set_drvdata(pdev, rtc); |
| return 0; |
| |
| out2: |
| rtc_device_unregister(rtc); |
| out1: |
| return ret; |
| } |
| |
| /* |
| * Disable all TWL RTC module interrupts. |
| * Sets status flag to free. |
| */ |
| static int __devexit twl_rtc_remove(struct platform_device *pdev) |
| { |
| /* leave rtc running, but disable irqs */ |
| struct rtc_device *rtc = platform_get_drvdata(pdev); |
| int irq = platform_get_irq(pdev, 0); |
| |
| mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); |
| mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); |
| if (twl_class_is_6030()) { |
| twl6030_interrupt_mask(TWL6030_RTC_INT_MASK, |
| REG_INT_MSK_LINE_A); |
| twl6030_interrupt_mask(TWL6030_RTC_INT_MASK, |
| REG_INT_MSK_STS_A); |
| } |
| |
| |
| free_irq(irq, rtc); |
| |
| rtc_device_unregister(rtc); |
| platform_set_drvdata(pdev, NULL); |
| return 0; |
| } |
| |
| static void twl_rtc_shutdown(struct platform_device *pdev) |
| { |
| /* mask timer interrupts, but leave alarm interrupts on to enable |
| power-on when alarm is triggered */ |
| mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); |
| } |
| |
| #ifdef CONFIG_PM |
| |
| static unsigned char irqstat; |
| |
| static int twl_rtc_suspend(struct platform_device *pdev, pm_message_t state) |
| { |
| irqstat = rtc_irq_bits; |
| |
| mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); |
| return 0; |
| } |
| |
| static int twl_rtc_resume(struct platform_device *pdev) |
| { |
| set_rtc_irq_bit(irqstat); |
| return 0; |
| } |
| |
| #else |
| #define twl_rtc_suspend NULL |
| #define twl_rtc_resume NULL |
| #endif |
| |
| static const struct of_device_id twl_rtc_of_match[] = { |
| {.compatible = "ti,twl4030-rtc", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, twl_rtc_of_match); |
| MODULE_ALIAS("platform:twl_rtc"); |
| |
| static struct platform_driver twl4030rtc_driver = { |
| .probe = twl_rtc_probe, |
| .remove = __devexit_p(twl_rtc_remove), |
| .shutdown = twl_rtc_shutdown, |
| .suspend = twl_rtc_suspend, |
| .resume = twl_rtc_resume, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "twl_rtc", |
| .of_match_table = twl_rtc_of_match, |
| }, |
| }; |
| |
| static int __init twl_rtc_init(void) |
| { |
| if (twl_class_is_4030()) |
| rtc_reg_map = (u8 *) twl4030_rtc_reg_map; |
| else |
| rtc_reg_map = (u8 *) twl6030_rtc_reg_map; |
| |
| return platform_driver_register(&twl4030rtc_driver); |
| } |
| module_init(twl_rtc_init); |
| |
| static void __exit twl_rtc_exit(void) |
| { |
| platform_driver_unregister(&twl4030rtc_driver); |
| } |
| module_exit(twl_rtc_exit); |
| |
| MODULE_AUTHOR("Texas Instruments, MontaVista Software"); |
| MODULE_LICENSE("GPL"); |