| /* |
| * Intel e752x Memory Controller kernel module |
| * (C) 2004 Linux Networx (http://lnxi.com) |
| * This file may be distributed under the terms of the |
| * GNU General Public License. |
| * |
| * See "enum e752x_chips" below for supported chipsets |
| * |
| * Written by Tom Zimmerman |
| * |
| * Contributors: |
| * Thayne Harbaugh at realmsys.com (?) |
| * Wang Zhenyu at intel.com |
| * Dave Jiang at mvista.com |
| * |
| * $Id: edac_e752x.c,v 1.5.2.11 2005/10/05 00:43:44 dsp_llnl Exp $ |
| * |
| */ |
| |
| #include <linux/config.h> |
| #include <linux/module.h> |
| #include <linux/init.h> |
| #include <linux/pci.h> |
| #include <linux/pci_ids.h> |
| #include <linux/slab.h> |
| #include "edac_mc.h" |
| |
| #define E752X_REVISION " Ver: 2.0.0 " __DATE__ |
| |
| static int force_function_unhide; |
| |
| #define e752x_printk(level, fmt, arg...) \ |
| edac_printk(level, "e752x", fmt, ##arg) |
| |
| #define e752x_mc_printk(mci, level, fmt, arg...) \ |
| edac_mc_chipset_printk(mci, level, "e752x", fmt, ##arg) |
| |
| #ifndef PCI_DEVICE_ID_INTEL_7520_0 |
| #define PCI_DEVICE_ID_INTEL_7520_0 0x3590 |
| #endif /* PCI_DEVICE_ID_INTEL_7520_0 */ |
| |
| #ifndef PCI_DEVICE_ID_INTEL_7520_1_ERR |
| #define PCI_DEVICE_ID_INTEL_7520_1_ERR 0x3591 |
| #endif /* PCI_DEVICE_ID_INTEL_7520_1_ERR */ |
| |
| #ifndef PCI_DEVICE_ID_INTEL_7525_0 |
| #define PCI_DEVICE_ID_INTEL_7525_0 0x359E |
| #endif /* PCI_DEVICE_ID_INTEL_7525_0 */ |
| |
| #ifndef PCI_DEVICE_ID_INTEL_7525_1_ERR |
| #define PCI_DEVICE_ID_INTEL_7525_1_ERR 0x3593 |
| #endif /* PCI_DEVICE_ID_INTEL_7525_1_ERR */ |
| |
| #ifndef PCI_DEVICE_ID_INTEL_7320_0 |
| #define PCI_DEVICE_ID_INTEL_7320_0 0x3592 |
| #endif /* PCI_DEVICE_ID_INTEL_7320_0 */ |
| |
| #ifndef PCI_DEVICE_ID_INTEL_7320_1_ERR |
| #define PCI_DEVICE_ID_INTEL_7320_1_ERR 0x3593 |
| #endif /* PCI_DEVICE_ID_INTEL_7320_1_ERR */ |
| |
| #define E752X_NR_CSROWS 8 /* number of csrows */ |
| |
| /* E752X register addresses - device 0 function 0 */ |
| #define E752X_DRB 0x60 /* DRAM row boundary register (8b) */ |
| #define E752X_DRA 0x70 /* DRAM row attribute register (8b) */ |
| /* |
| * 31:30 Device width row 7 |
| * 01=x8 10=x4 11=x8 DDR2 |
| * 27:26 Device width row 6 |
| * 23:22 Device width row 5 |
| * 19:20 Device width row 4 |
| * 15:14 Device width row 3 |
| * 11:10 Device width row 2 |
| * 7:6 Device width row 1 |
| * 3:2 Device width row 0 |
| */ |
| #define E752X_DRC 0x7C /* DRAM controller mode reg (32b) */ |
| /* FIXME:IS THIS RIGHT? */ |
| /* |
| * 22 Number channels 0=1,1=2 |
| * 19:18 DRB Granularity 32/64MB |
| */ |
| #define E752X_DRM 0x80 /* Dimm mapping register */ |
| #define E752X_DDRCSR 0x9A /* DDR control and status reg (16b) */ |
| /* |
| * 14:12 1 single A, 2 single B, 3 dual |
| */ |
| #define E752X_TOLM 0xC4 /* DRAM top of low memory reg (16b) */ |
| #define E752X_REMAPBASE 0xC6 /* DRAM remap base address reg (16b) */ |
| #define E752X_REMAPLIMIT 0xC8 /* DRAM remap limit address reg (16b) */ |
| #define E752X_REMAPOFFSET 0xCA /* DRAM remap limit offset reg (16b) */ |
| |
| /* E752X register addresses - device 0 function 1 */ |
| #define E752X_FERR_GLOBAL 0x40 /* Global first error register (32b) */ |
| #define E752X_NERR_GLOBAL 0x44 /* Global next error register (32b) */ |
| #define E752X_HI_FERR 0x50 /* Hub interface first error reg (8b) */ |
| #define E752X_HI_NERR 0x52 /* Hub interface next error reg (8b) */ |
| #define E752X_HI_ERRMASK 0x54 /* Hub interface error mask reg (8b) */ |
| #define E752X_HI_SMICMD 0x5A /* Hub interface SMI command reg (8b) */ |
| #define E752X_SYSBUS_FERR 0x60 /* System buss first error reg (16b) */ |
| #define E752X_SYSBUS_NERR 0x62 /* System buss next error reg (16b) */ |
| #define E752X_SYSBUS_ERRMASK 0x64 /* System buss error mask reg (16b) */ |
| #define E752X_SYSBUS_SMICMD 0x6A /* System buss SMI command reg (16b) */ |
| #define E752X_BUF_FERR 0x70 /* Memory buffer first error reg (8b) */ |
| #define E752X_BUF_NERR 0x72 /* Memory buffer next error reg (8b) */ |
| #define E752X_BUF_ERRMASK 0x74 /* Memory buffer error mask reg (8b) */ |
| #define E752X_BUF_SMICMD 0x7A /* Memory buffer SMI command reg (8b) */ |
| #define E752X_DRAM_FERR 0x80 /* DRAM first error register (16b) */ |
| #define E752X_DRAM_NERR 0x82 /* DRAM next error register (16b) */ |
| #define E752X_DRAM_ERRMASK 0x84 /* DRAM error mask register (8b) */ |
| #define E752X_DRAM_SMICMD 0x8A /* DRAM SMI command register (8b) */ |
| #define E752X_DRAM_RETR_ADD 0xAC /* DRAM Retry address register (32b) */ |
| #define E752X_DRAM_SEC1_ADD 0xA0 /* DRAM first correctable memory */ |
| /* error address register (32b) */ |
| /* |
| * 31 Reserved |
| * 30:2 CE address (64 byte block 34:6) |
| * 1 Reserved |
| * 0 HiLoCS |
| */ |
| #define E752X_DRAM_SEC2_ADD 0xC8 /* DRAM first correctable memory */ |
| /* error address register (32b) */ |
| /* |
| * 31 Reserved |
| * 30:2 CE address (64 byte block 34:6) |
| * 1 Reserved |
| * 0 HiLoCS |
| */ |
| #define E752X_DRAM_DED_ADD 0xA4 /* DRAM first uncorrectable memory */ |
| /* error address register (32b) */ |
| /* |
| * 31 Reserved |
| * 30:2 CE address (64 byte block 34:6) |
| * 1 Reserved |
| * 0 HiLoCS |
| */ |
| #define E752X_DRAM_SCRB_ADD 0xA8 /* DRAM first uncorrectable scrub memory */ |
| /* error address register (32b) */ |
| /* |
| * 31 Reserved |
| * 30:2 CE address (64 byte block 34:6) |
| * 1 Reserved |
| * 0 HiLoCS |
| */ |
| #define E752X_DRAM_SEC1_SYNDROME 0xC4 /* DRAM first correctable memory */ |
| /* error syndrome register (16b) */ |
| #define E752X_DRAM_SEC2_SYNDROME 0xC6 /* DRAM second correctable memory */ |
| /* error syndrome register (16b) */ |
| #define E752X_DEVPRES1 0xF4 /* Device Present 1 register (8b) */ |
| |
| /* ICH5R register addresses - device 30 function 0 */ |
| #define ICH5R_PCI_STAT 0x06 /* PCI status register (16b) */ |
| #define ICH5R_PCI_2ND_STAT 0x1E /* PCI status secondary reg (16b) */ |
| #define ICH5R_PCI_BRIDGE_CTL 0x3E /* PCI bridge control register (16b) */ |
| |
| enum e752x_chips { |
| E7520 = 0, |
| E7525 = 1, |
| E7320 = 2 |
| }; |
| |
| struct e752x_pvt { |
| struct pci_dev *bridge_ck; |
| struct pci_dev *dev_d0f0; |
| struct pci_dev *dev_d0f1; |
| u32 tolm; |
| u32 remapbase; |
| u32 remaplimit; |
| int mc_symmetric; |
| u8 map[8]; |
| int map_type; |
| const struct e752x_dev_info *dev_info; |
| }; |
| |
| struct e752x_dev_info { |
| u16 err_dev; |
| u16 ctl_dev; |
| const char *ctl_name; |
| }; |
| |
| struct e752x_error_info { |
| u32 ferr_global; |
| u32 nerr_global; |
| u8 hi_ferr; |
| u8 hi_nerr; |
| u16 sysbus_ferr; |
| u16 sysbus_nerr; |
| u8 buf_ferr; |
| u8 buf_nerr; |
| u16 dram_ferr; |
| u16 dram_nerr; |
| u32 dram_sec1_add; |
| u32 dram_sec2_add; |
| u16 dram_sec1_syndrome; |
| u16 dram_sec2_syndrome; |
| u32 dram_ded_add; |
| u32 dram_scrb_add; |
| u32 dram_retr_add; |
| }; |
| |
| static const struct e752x_dev_info e752x_devs[] = { |
| [E7520] = { |
| .err_dev = PCI_DEVICE_ID_INTEL_7520_1_ERR, |
| .ctl_dev = PCI_DEVICE_ID_INTEL_7520_0, |
| .ctl_name = "E7520" |
| }, |
| [E7525] = { |
| .err_dev = PCI_DEVICE_ID_INTEL_7525_1_ERR, |
| .ctl_dev = PCI_DEVICE_ID_INTEL_7525_0, |
| .ctl_name = "E7525" |
| }, |
| [E7320] = { |
| .err_dev = PCI_DEVICE_ID_INTEL_7320_1_ERR, |
| .ctl_dev = PCI_DEVICE_ID_INTEL_7320_0, |
| .ctl_name = "E7320" |
| }, |
| }; |
| |
| static unsigned long ctl_page_to_phys(struct mem_ctl_info *mci, |
| unsigned long page) |
| { |
| u32 remap; |
| struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info; |
| |
| debugf3("%s()\n", __func__); |
| |
| if (page < pvt->tolm) |
| return page; |
| |
| if ((page >= 0x100000) && (page < pvt->remapbase)) |
| return page; |
| |
| remap = (page - pvt->tolm) + pvt->remapbase; |
| |
| if (remap < pvt->remaplimit) |
| return remap; |
| |
| e752x_printk(KERN_ERR, "Invalid page %lx - out of range\n", page); |
| return pvt->tolm - 1; |
| } |
| |
| static void do_process_ce(struct mem_ctl_info *mci, u16 error_one, |
| u32 sec1_add, u16 sec1_syndrome) |
| { |
| u32 page; |
| int row; |
| int channel; |
| int i; |
| struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info; |
| |
| debugf3("%s()\n", __func__); |
| |
| /* convert the addr to 4k page */ |
| page = sec1_add >> (PAGE_SHIFT - 4); |
| |
| /* FIXME - check for -1 */ |
| if (pvt->mc_symmetric) { |
| /* chip select are bits 14 & 13 */ |
| row = ((page >> 1) & 3); |
| e752x_printk(KERN_WARNING, |
| "Test row %d Table %d %d %d %d %d %d %d %d\n", row, |
| pvt->map[0], pvt->map[1], pvt->map[2], pvt->map[3], |
| pvt->map[4], pvt->map[5], pvt->map[6], pvt->map[7]); |
| |
| /* test for channel remapping */ |
| for (i = 0; i < 8; i++) { |
| if (pvt->map[i] == row) |
| break; |
| } |
| |
| e752x_printk(KERN_WARNING, "Test computed row %d\n", i); |
| |
| if (i < 8) |
| row = i; |
| else |
| e752x_mc_printk(mci, KERN_WARNING, |
| "row %d not found in remap table\n", row); |
| } else |
| row = edac_mc_find_csrow_by_page(mci, page); |
| |
| /* 0 = channel A, 1 = channel B */ |
| channel = !(error_one & 1); |
| |
| if (!pvt->map_type) |
| row = 7 - row; |
| |
| edac_mc_handle_ce(mci, page, 0, sec1_syndrome, row, channel, |
| "e752x CE"); |
| } |
| |
| static inline void process_ce(struct mem_ctl_info *mci, u16 error_one, |
| u32 sec1_add, u16 sec1_syndrome, int *error_found, |
| int handle_error) |
| { |
| *error_found = 1; |
| |
| if (handle_error) |
| do_process_ce(mci, error_one, sec1_add, sec1_syndrome); |
| } |
| |
| static void do_process_ue(struct mem_ctl_info *mci, u16 error_one, |
| u32 ded_add, u32 scrb_add) |
| { |
| u32 error_2b, block_page; |
| int row; |
| struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info; |
| |
| debugf3("%s()\n", __func__); |
| |
| if (error_one & 0x0202) { |
| error_2b = ded_add; |
| |
| /* convert to 4k address */ |
| block_page = error_2b >> (PAGE_SHIFT - 4); |
| |
| row = pvt->mc_symmetric ? |
| /* chip select are bits 14 & 13 */ |
| ((block_page >> 1) & 3) : |
| edac_mc_find_csrow_by_page(mci, block_page); |
| |
| edac_mc_handle_ue(mci, block_page, 0, row, |
| "e752x UE from Read"); |
| } |
| if (error_one & 0x0404) { |
| error_2b = scrb_add; |
| |
| /* convert to 4k address */ |
| block_page = error_2b >> (PAGE_SHIFT - 4); |
| |
| row = pvt->mc_symmetric ? |
| /* chip select are bits 14 & 13 */ |
| ((block_page >> 1) & 3) : |
| edac_mc_find_csrow_by_page(mci, block_page); |
| |
| edac_mc_handle_ue(mci, block_page, 0, row, |
| "e752x UE from Scruber"); |
| } |
| } |
| |
| static inline void process_ue(struct mem_ctl_info *mci, u16 error_one, |
| u32 ded_add, u32 scrb_add, int *error_found, int handle_error) |
| { |
| *error_found = 1; |
| |
| if (handle_error) |
| do_process_ue(mci, error_one, ded_add, scrb_add); |
| } |
| |
| static inline void process_ue_no_info_wr(struct mem_ctl_info *mci, |
| int *error_found, int handle_error) |
| { |
| *error_found = 1; |
| |
| if (!handle_error) |
| return; |
| |
| debugf3("%s()\n", __func__); |
| edac_mc_handle_ue_no_info(mci, "e752x UE log memory write"); |
| } |
| |
| static void do_process_ded_retry(struct mem_ctl_info *mci, u16 error, |
| u32 retry_add) |
| { |
| u32 error_1b, page; |
| int row; |
| struct e752x_pvt *pvt = (struct e752x_pvt *) mci->pvt_info; |
| |
| error_1b = retry_add; |
| page = error_1b >> (PAGE_SHIFT - 4); /* convert the addr to 4k page */ |
| row = pvt->mc_symmetric ? |
| ((page >> 1) & 3) : /* chip select are bits 14 & 13 */ |
| edac_mc_find_csrow_by_page(mci, page); |
| e752x_mc_printk(mci, KERN_WARNING, |
| "CE page 0x%lx, row %d : Memory read retry\n", |
| (long unsigned int) page, row); |
| } |
| |
| static inline void process_ded_retry(struct mem_ctl_info *mci, u16 error, |
| u32 retry_add, int *error_found, int handle_error) |
| { |
| *error_found = 1; |
| |
| if (handle_error) |
| do_process_ded_retry(mci, error, retry_add); |
| } |
| |
| static inline void process_threshold_ce(struct mem_ctl_info *mci, u16 error, |
| int *error_found, int handle_error) |
| { |
| *error_found = 1; |
| |
| if (handle_error) |
| e752x_mc_printk(mci, KERN_WARNING, "Memory threshold CE\n"); |
| } |
| |
| static char *global_message[11] = { |
| "PCI Express C1", "PCI Express C", "PCI Express B1", |
| "PCI Express B", "PCI Express A1", "PCI Express A", |
| "DMA Controler", "HUB Interface", "System Bus", |
| "DRAM Controler", "Internal Buffer" |
| }; |
| |
| static char *fatal_message[2] = { "Non-Fatal ", "Fatal " }; |
| |
| static void do_global_error(int fatal, u32 errors) |
| { |
| int i; |
| |
| for (i = 0; i < 11; i++) { |
| if (errors & (1 << i)) |
| e752x_printk(KERN_WARNING, "%sError %s\n", |
| fatal_message[fatal], global_message[i]); |
| } |
| } |
| |
| static inline void global_error(int fatal, u32 errors, int *error_found, |
| int handle_error) |
| { |
| *error_found = 1; |
| |
| if (handle_error) |
| do_global_error(fatal, errors); |
| } |
| |
| static char *hub_message[7] = { |
| "HI Address or Command Parity", "HI Illegal Access", |
| "HI Internal Parity", "Out of Range Access", |
| "HI Data Parity", "Enhanced Config Access", |
| "Hub Interface Target Abort" |
| }; |
| |
| static void do_hub_error(int fatal, u8 errors) |
| { |
| int i; |
| |
| for (i = 0; i < 7; i++) { |
| if (errors & (1 << i)) |
| e752x_printk(KERN_WARNING, "%sError %s\n", |
| fatal_message[fatal], hub_message[i]); |
| } |
| } |
| |
| static inline void hub_error(int fatal, u8 errors, int *error_found, |
| int handle_error) |
| { |
| *error_found = 1; |
| |
| if (handle_error) |
| do_hub_error(fatal, errors); |
| } |
| |
| static char *membuf_message[4] = { |
| "Internal PMWB to DRAM parity", |
| "Internal PMWB to System Bus Parity", |
| "Internal System Bus or IO to PMWB Parity", |
| "Internal DRAM to PMWB Parity" |
| }; |
| |
| static void do_membuf_error(u8 errors) |
| { |
| int i; |
| |
| for (i = 0; i < 4; i++) { |
| if (errors & (1 << i)) |
| e752x_printk(KERN_WARNING, "Non-Fatal Error %s\n", |
| membuf_message[i]); |
| } |
| } |
| |
| static inline void membuf_error(u8 errors, int *error_found, int handle_error) |
| { |
| *error_found = 1; |
| |
| if (handle_error) |
| do_membuf_error(errors); |
| } |
| |
| static char *sysbus_message[10] = { |
| "Addr or Request Parity", |
| "Data Strobe Glitch", |
| "Addr Strobe Glitch", |
| "Data Parity", |
| "Addr Above TOM", |
| "Non DRAM Lock Error", |
| "MCERR", "BINIT", |
| "Memory Parity", |
| "IO Subsystem Parity" |
| }; |
| |
| static void do_sysbus_error(int fatal, u32 errors) |
| { |
| int i; |
| |
| for (i = 0; i < 10; i++) { |
| if (errors & (1 << i)) |
| e752x_printk(KERN_WARNING, "%sError System Bus %s\n", |
| fatal_message[fatal], sysbus_message[i]); |
| } |
| } |
| |
| static inline void sysbus_error(int fatal, u32 errors, int *error_found, |
| int handle_error) |
| { |
| *error_found = 1; |
| |
| if (handle_error) |
| do_sysbus_error(fatal, errors); |
| } |
| |
| static void e752x_check_hub_interface(struct e752x_error_info *info, |
| int *error_found, int handle_error) |
| { |
| u8 stat8; |
| |
| //pci_read_config_byte(dev,E752X_HI_FERR,&stat8); |
| |
| stat8 = info->hi_ferr; |
| |
| if(stat8 & 0x7f) { /* Error, so process */ |
| stat8 &= 0x7f; |
| |
| if(stat8 & 0x2b) |
| hub_error(1, stat8 & 0x2b, error_found, handle_error); |
| |
| if(stat8 & 0x54) |
| hub_error(0, stat8 & 0x54, error_found, handle_error); |
| } |
| |
| //pci_read_config_byte(dev,E752X_HI_NERR,&stat8); |
| |
| stat8 = info->hi_nerr; |
| |
| if(stat8 & 0x7f) { /* Error, so process */ |
| stat8 &= 0x7f; |
| |
| if (stat8 & 0x2b) |
| hub_error(1, stat8 & 0x2b, error_found, handle_error); |
| |
| if(stat8 & 0x54) |
| hub_error(0, stat8 & 0x54, error_found, handle_error); |
| } |
| } |
| |
| static void e752x_check_sysbus(struct e752x_error_info *info, |
| int *error_found, int handle_error) |
| { |
| u32 stat32, error32; |
| |
| //pci_read_config_dword(dev,E752X_SYSBUS_FERR,&stat32); |
| stat32 = info->sysbus_ferr + (info->sysbus_nerr << 16); |
| |
| if (stat32 == 0) |
| return; /* no errors */ |
| |
| error32 = (stat32 >> 16) & 0x3ff; |
| stat32 = stat32 & 0x3ff; |
| |
| if(stat32 & 0x083) |
| sysbus_error(1, stat32 & 0x083, error_found, handle_error); |
| |
| if(stat32 & 0x37c) |
| sysbus_error(0, stat32 & 0x37c, error_found, handle_error); |
| |
| if(error32 & 0x083) |
| sysbus_error(1, error32 & 0x083, error_found, handle_error); |
| |
| if(error32 & 0x37c) |
| sysbus_error(0, error32 & 0x37c, error_found, handle_error); |
| } |
| |
| static void e752x_check_membuf (struct e752x_error_info *info, |
| int *error_found, int handle_error) |
| { |
| u8 stat8; |
| |
| stat8 = info->buf_ferr; |
| |
| if (stat8 & 0x0f) { /* Error, so process */ |
| stat8 &= 0x0f; |
| membuf_error(stat8, error_found, handle_error); |
| } |
| |
| stat8 = info->buf_nerr; |
| |
| if (stat8 & 0x0f) { /* Error, so process */ |
| stat8 &= 0x0f; |
| membuf_error(stat8, error_found, handle_error); |
| } |
| } |
| |
| static void e752x_check_dram (struct mem_ctl_info *mci, |
| struct e752x_error_info *info, int *error_found, |
| int handle_error) |
| { |
| u16 error_one, error_next; |
| |
| error_one = info->dram_ferr; |
| error_next = info->dram_nerr; |
| |
| /* decode and report errors */ |
| if(error_one & 0x0101) /* check first error correctable */ |
| process_ce(mci, error_one, info->dram_sec1_add, |
| info->dram_sec1_syndrome, error_found, |
| handle_error); |
| |
| if(error_next & 0x0101) /* check next error correctable */ |
| process_ce(mci, error_next, info->dram_sec2_add, |
| info->dram_sec2_syndrome, error_found, |
| handle_error); |
| |
| if(error_one & 0x4040) |
| process_ue_no_info_wr(mci, error_found, handle_error); |
| |
| if(error_next & 0x4040) |
| process_ue_no_info_wr(mci, error_found, handle_error); |
| |
| if(error_one & 0x2020) |
| process_ded_retry(mci, error_one, info->dram_retr_add, |
| error_found, handle_error); |
| |
| if(error_next & 0x2020) |
| process_ded_retry(mci, error_next, info->dram_retr_add, |
| error_found, handle_error); |
| |
| if(error_one & 0x0808) |
| process_threshold_ce(mci, error_one, error_found, |
| handle_error); |
| |
| if(error_next & 0x0808) |
| process_threshold_ce(mci, error_next, error_found, |
| handle_error); |
| |
| if(error_one & 0x0606) |
| process_ue(mci, error_one, info->dram_ded_add, |
| info->dram_scrb_add, error_found, handle_error); |
| |
| if(error_next & 0x0606) |
| process_ue(mci, error_next, info->dram_ded_add, |
| info->dram_scrb_add, error_found, handle_error); |
| } |
| |
| static void e752x_get_error_info (struct mem_ctl_info *mci, |
| struct e752x_error_info *info) |
| { |
| struct pci_dev *dev; |
| struct e752x_pvt *pvt; |
| |
| memset(info, 0, sizeof(*info)); |
| pvt = (struct e752x_pvt *) mci->pvt_info; |
| dev = pvt->dev_d0f1; |
| pci_read_config_dword(dev, E752X_FERR_GLOBAL, &info->ferr_global); |
| |
| if (info->ferr_global) { |
| pci_read_config_byte(dev, E752X_HI_FERR, &info->hi_ferr); |
| pci_read_config_word(dev, E752X_SYSBUS_FERR, |
| &info->sysbus_ferr); |
| pci_read_config_byte(dev, E752X_BUF_FERR, &info->buf_ferr); |
| pci_read_config_word(dev, E752X_DRAM_FERR, |
| &info->dram_ferr); |
| pci_read_config_dword(dev, E752X_DRAM_SEC1_ADD, |
| &info->dram_sec1_add); |
| pci_read_config_word(dev, E752X_DRAM_SEC1_SYNDROME, |
| &info->dram_sec1_syndrome); |
| pci_read_config_dword(dev, E752X_DRAM_DED_ADD, |
| &info->dram_ded_add); |
| pci_read_config_dword(dev, E752X_DRAM_SCRB_ADD, |
| &info->dram_scrb_add); |
| pci_read_config_dword(dev, E752X_DRAM_RETR_ADD, |
| &info->dram_retr_add); |
| |
| if (info->hi_ferr & 0x7f) |
| pci_write_config_byte(dev, E752X_HI_FERR, |
| info->hi_ferr); |
| |
| if (info->sysbus_ferr) |
| pci_write_config_word(dev, E752X_SYSBUS_FERR, |
| info->sysbus_ferr); |
| |
| if (info->buf_ferr & 0x0f) |
| pci_write_config_byte(dev, E752X_BUF_FERR, |
| info->buf_ferr); |
| |
| if (info->dram_ferr) |
| pci_write_bits16(pvt->bridge_ck, E752X_DRAM_FERR, |
| info->dram_ferr, info->dram_ferr); |
| |
| pci_write_config_dword(dev, E752X_FERR_GLOBAL, |
| info->ferr_global); |
| } |
| |
| pci_read_config_dword(dev, E752X_NERR_GLOBAL, &info->nerr_global); |
| |
| if (info->nerr_global) { |
| pci_read_config_byte(dev, E752X_HI_NERR, &info->hi_nerr); |
| pci_read_config_word(dev, E752X_SYSBUS_NERR, |
| &info->sysbus_nerr); |
| pci_read_config_byte(dev, E752X_BUF_NERR, &info->buf_nerr); |
| pci_read_config_word(dev, E752X_DRAM_NERR, |
| &info->dram_nerr); |
| pci_read_config_dword(dev, E752X_DRAM_SEC2_ADD, |
| &info->dram_sec2_add); |
| pci_read_config_word(dev, E752X_DRAM_SEC2_SYNDROME, |
| &info->dram_sec2_syndrome); |
| |
| if (info->hi_nerr & 0x7f) |
| pci_write_config_byte(dev, E752X_HI_NERR, |
| info->hi_nerr); |
| |
| if (info->sysbus_nerr) |
| pci_write_config_word(dev, E752X_SYSBUS_NERR, |
| info->sysbus_nerr); |
| |
| if (info->buf_nerr & 0x0f) |
| pci_write_config_byte(dev, E752X_BUF_NERR, |
| info->buf_nerr); |
| |
| if (info->dram_nerr) |
| pci_write_bits16(pvt->bridge_ck, E752X_DRAM_NERR, |
| info->dram_nerr, info->dram_nerr); |
| |
| pci_write_config_dword(dev, E752X_NERR_GLOBAL, |
| info->nerr_global); |
| } |
| } |
| |
| static int e752x_process_error_info (struct mem_ctl_info *mci, |
| struct e752x_error_info *info, int handle_errors) |
| { |
| u32 error32, stat32; |
| int error_found; |
| |
| error_found = 0; |
| error32 = (info->ferr_global >> 18) & 0x3ff; |
| stat32 = (info->ferr_global >> 4) & 0x7ff; |
| |
| if (error32) |
| global_error(1, error32, &error_found, handle_errors); |
| |
| if (stat32) |
| global_error(0, stat32, &error_found, handle_errors); |
| |
| error32 = (info->nerr_global >> 18) & 0x3ff; |
| stat32 = (info->nerr_global >> 4) & 0x7ff; |
| |
| if (error32) |
| global_error(1, error32, &error_found, handle_errors); |
| |
| if (stat32) |
| global_error(0, stat32, &error_found, handle_errors); |
| |
| e752x_check_hub_interface(info, &error_found, handle_errors); |
| e752x_check_sysbus(info, &error_found, handle_errors); |
| e752x_check_membuf(info, &error_found, handle_errors); |
| e752x_check_dram(mci, info, &error_found, handle_errors); |
| return error_found; |
| } |
| |
| static void e752x_check(struct mem_ctl_info *mci) |
| { |
| struct e752x_error_info info; |
| |
| debugf3("%s()\n", __func__); |
| e752x_get_error_info(mci, &info); |
| e752x_process_error_info(mci, &info, 1); |
| } |
| |
| /* Return 1 if dual channel mode is active. Else return 0. */ |
| static inline int dual_channel_active(u16 ddrcsr) |
| { |
| return (((ddrcsr >> 12) & 3) == 3); |
| } |
| |
| static void e752x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, |
| u16 ddrcsr) |
| { |
| struct csrow_info *csrow; |
| unsigned long last_cumul_size; |
| int index, mem_dev, drc_chan; |
| int drc_drbg; /* DRB granularity 0=64mb, 1=128mb */ |
| int drc_ddim; /* DRAM Data Integrity Mode 0=none, 2=edac */ |
| u8 value; |
| u32 dra, drc, cumul_size; |
| |
| pci_read_config_dword(pdev, E752X_DRA, &dra); |
| pci_read_config_dword(pdev, E752X_DRC, &drc); |
| drc_chan = dual_channel_active(ddrcsr); |
| drc_drbg = drc_chan + 1; /* 128 in dual mode, 64 in single */ |
| drc_ddim = (drc >> 20) & 0x3; |
| |
| /* The dram row boundary (DRB) reg values are boundary address for |
| * each DRAM row with a granularity of 64 or 128MB (single/dual |
| * channel operation). DRB regs are cumulative; therefore DRB7 will |
| * contain the total memory contained in all eight rows. |
| */ |
| for (last_cumul_size = index = 0; index < mci->nr_csrows; index++) { |
| /* mem_dev 0=x8, 1=x4 */ |
| mem_dev = (dra >> (index * 4 + 2)) & 0x3; |
| csrow = &mci->csrows[index]; |
| |
| mem_dev = (mem_dev == 2); |
| pci_read_config_byte(pdev, E752X_DRB + index, &value); |
| /* convert a 128 or 64 MiB DRB to a page size. */ |
| cumul_size = value << (25 + drc_drbg - PAGE_SHIFT); |
| debugf3("%s(): (%d) cumul_size 0x%x\n", __func__, index, |
| cumul_size); |
| if (cumul_size == last_cumul_size) |
| continue; /* not populated */ |
| |
| csrow->first_page = last_cumul_size; |
| csrow->last_page = cumul_size - 1; |
| csrow->nr_pages = cumul_size - last_cumul_size; |
| last_cumul_size = cumul_size; |
| csrow->grain = 1 << 12; /* 4KiB - resolution of CELOG */ |
| csrow->mtype = MEM_RDDR; /* only one type supported */ |
| csrow->dtype = mem_dev ? DEV_X4 : DEV_X8; |
| |
| /* |
| * if single channel or x8 devices then SECDED |
| * if dual channel and x4 then S4ECD4ED |
| */ |
| if (drc_ddim) { |
| if (drc_chan && mem_dev) { |
| csrow->edac_mode = EDAC_S4ECD4ED; |
| mci->edac_cap |= EDAC_FLAG_S4ECD4ED; |
| } else { |
| csrow->edac_mode = EDAC_SECDED; |
| mci->edac_cap |= EDAC_FLAG_SECDED; |
| } |
| } else |
| csrow->edac_mode = EDAC_NONE; |
| } |
| } |
| |
| static void e752x_init_mem_map_table(struct pci_dev *pdev, |
| struct e752x_pvt *pvt) |
| { |
| int index; |
| u8 value, last, row, stat8; |
| |
| last = 0; |
| row = 0; |
| |
| for (index = 0; index < 8; index += 2) { |
| pci_read_config_byte(pdev, E752X_DRB + index, &value); |
| /* test if there is a dimm in this slot */ |
| if (value == last) { |
| /* no dimm in the slot, so flag it as empty */ |
| pvt->map[index] = 0xff; |
| pvt->map[index + 1] = 0xff; |
| } else { /* there is a dimm in the slot */ |
| pvt->map[index] = row; |
| row++; |
| last = value; |
| /* test the next value to see if the dimm is double |
| * sided |
| */ |
| pci_read_config_byte(pdev, E752X_DRB + index + 1, |
| &value); |
| pvt->map[index + 1] = (value == last) ? |
| 0xff : /* the dimm is single sided, |
| so flag as empty */ |
| row; /* this is a double sided dimm |
| to save the next row # */ |
| row++; |
| last = value; |
| } |
| } |
| |
| /* set the map type. 1 = normal, 0 = reversed */ |
| pci_read_config_byte(pdev, E752X_DRM, &stat8); |
| pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f)); |
| } |
| |
| /* Return 0 on success or 1 on failure. */ |
| static int e752x_get_devs(struct pci_dev *pdev, int dev_idx, |
| struct e752x_pvt *pvt) |
| { |
| struct pci_dev *dev; |
| |
| pvt->bridge_ck = pci_get_device(PCI_VENDOR_ID_INTEL, |
| pvt->dev_info->err_dev, |
| pvt->bridge_ck); |
| |
| if (pvt->bridge_ck == NULL) |
| pvt->bridge_ck = pci_scan_single_device(pdev->bus, |
| PCI_DEVFN(0, 1)); |
| |
| if (pvt->bridge_ck == NULL) { |
| e752x_printk(KERN_ERR, "error reporting device not found:" |
| "vendor %x device 0x%x (broken BIOS?)\n", |
| PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].err_dev); |
| return 1; |
| } |
| |
| dev = pci_get_device(PCI_VENDOR_ID_INTEL, e752x_devs[dev_idx].ctl_dev, |
| NULL); |
| |
| if (dev == NULL) |
| goto fail; |
| |
| pvt->dev_d0f0 = dev; |
| pvt->dev_d0f1 = pci_dev_get(pvt->bridge_ck); |
| |
| return 0; |
| |
| fail: |
| pci_dev_put(pvt->bridge_ck); |
| return 1; |
| } |
| |
| static void e752x_init_error_reporting_regs(struct e752x_pvt *pvt) |
| { |
| struct pci_dev *dev; |
| |
| dev = pvt->dev_d0f1; |
| /* Turn off error disable & SMI in case the BIOS turned it on */ |
| pci_write_config_byte(dev, E752X_HI_ERRMASK, 0x00); |
| pci_write_config_byte(dev, E752X_HI_SMICMD, 0x00); |
| pci_write_config_word(dev, E752X_SYSBUS_ERRMASK, 0x00); |
| pci_write_config_word(dev, E752X_SYSBUS_SMICMD, 0x00); |
| pci_write_config_byte(dev, E752X_BUF_ERRMASK, 0x00); |
| pci_write_config_byte(dev, E752X_BUF_SMICMD, 0x00); |
| pci_write_config_byte(dev, E752X_DRAM_ERRMASK, 0x00); |
| pci_write_config_byte(dev, E752X_DRAM_SMICMD, 0x00); |
| } |
| |
| static int e752x_probe1(struct pci_dev *pdev, int dev_idx) |
| { |
| u16 pci_data; |
| u8 stat8; |
| struct mem_ctl_info *mci; |
| struct e752x_pvt *pvt; |
| u16 ddrcsr; |
| int drc_chan; /* Number of channels 0=1chan,1=2chan */ |
| struct e752x_error_info discard; |
| |
| debugf0("%s(): mci\n", __func__); |
| debugf0("Starting Probe1\n"); |
| |
| /* check to see if device 0 function 1 is enabled; if it isn't, we |
| * assume the BIOS has reserved it for a reason and is expecting |
| * exclusive access, we take care not to violate that assumption and |
| * fail the probe. */ |
| pci_read_config_byte(pdev, E752X_DEVPRES1, &stat8); |
| if (!force_function_unhide && !(stat8 & (1 << 5))) { |
| printk(KERN_INFO "Contact your BIOS vendor to see if the " |
| "E752x error registers can be safely un-hidden\n"); |
| return -ENOMEM; |
| } |
| stat8 |= (1 << 5); |
| pci_write_config_byte(pdev, E752X_DEVPRES1, stat8); |
| |
| pci_read_config_word(pdev, E752X_DDRCSR, &ddrcsr); |
| /* FIXME: should check >>12 or 0xf, true for all? */ |
| /* Dual channel = 1, Single channel = 0 */ |
| drc_chan = dual_channel_active(ddrcsr); |
| |
| mci = edac_mc_alloc(sizeof(*pvt), E752X_NR_CSROWS, drc_chan + 1); |
| |
| if (mci == NULL) { |
| return -ENOMEM; |
| } |
| |
| debugf3("%s(): init mci\n", __func__); |
| mci->mtype_cap = MEM_FLAG_RDDR; |
| mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED | |
| EDAC_FLAG_S4ECD4ED; |
| /* FIXME - what if different memory types are in different csrows? */ |
| mci->mod_name = EDAC_MOD_STR; |
| mci->mod_ver = E752X_REVISION; |
| mci->dev = &pdev->dev; |
| |
| debugf3("%s(): init pvt\n", __func__); |
| pvt = (struct e752x_pvt *) mci->pvt_info; |
| pvt->dev_info = &e752x_devs[dev_idx]; |
| pvt->mc_symmetric = ((ddrcsr & 0x10) != 0); |
| |
| if (e752x_get_devs(pdev, dev_idx, pvt)) { |
| edac_mc_free(mci); |
| return -ENODEV; |
| } |
| |
| debugf3("%s(): more mci init\n", __func__); |
| mci->ctl_name = pvt->dev_info->ctl_name; |
| mci->edac_check = e752x_check; |
| mci->ctl_page_to_phys = ctl_page_to_phys; |
| |
| e752x_init_csrows(mci, pdev, ddrcsr); |
| e752x_init_mem_map_table(pdev, pvt); |
| |
| /* set the map type. 1 = normal, 0 = reversed */ |
| pci_read_config_byte(pdev, E752X_DRM, &stat8); |
| pvt->map_type = ((stat8 & 0x0f) > ((stat8 >> 4) & 0x0f)); |
| |
| mci->edac_cap |= EDAC_FLAG_NONE; |
| debugf3("%s(): tolm, remapbase, remaplimit\n", __func__); |
| |
| /* load the top of low memory, remap base, and remap limit vars */ |
| pci_read_config_word(pdev, E752X_TOLM, &pci_data); |
| pvt->tolm = ((u32) pci_data) << 4; |
| pci_read_config_word(pdev, E752X_REMAPBASE, &pci_data); |
| pvt->remapbase = ((u32) pci_data) << 14; |
| pci_read_config_word(pdev, E752X_REMAPLIMIT, &pci_data); |
| pvt->remaplimit = ((u32) pci_data) << 14; |
| e752x_printk(KERN_INFO, |
| "tolm = %x, remapbase = %x, remaplimit = %x\n", pvt->tolm, |
| pvt->remapbase, pvt->remaplimit); |
| |
| /* Here we assume that we will never see multiple instances of this |
| * type of memory controller. The ID is therefore hardcoded to 0. |
| */ |
| if (edac_mc_add_mc(mci,0)) { |
| debugf3("%s(): failed edac_mc_add_mc()\n", __func__); |
| goto fail; |
| } |
| |
| e752x_init_error_reporting_regs(pvt); |
| e752x_get_error_info(mci, &discard); /* clear other MCH errors */ |
| |
| /* get this far and it's successful */ |
| debugf3("%s(): success\n", __func__); |
| return 0; |
| |
| fail: |
| pci_dev_put(pvt->dev_d0f0); |
| pci_dev_put(pvt->dev_d0f1); |
| pci_dev_put(pvt->bridge_ck); |
| edac_mc_free(mci); |
| |
| return -ENODEV; |
| } |
| |
| /* returns count (>= 0), or negative on error */ |
| static int __devinit e752x_init_one(struct pci_dev *pdev, |
| const struct pci_device_id *ent) |
| { |
| debugf0("%s()\n", __func__); |
| |
| /* wake up and enable device */ |
| if(pci_enable_device(pdev) < 0) |
| return -EIO; |
| |
| return e752x_probe1(pdev, ent->driver_data); |
| } |
| |
| static void __devexit e752x_remove_one(struct pci_dev *pdev) |
| { |
| struct mem_ctl_info *mci; |
| struct e752x_pvt *pvt; |
| |
| debugf0("%s()\n", __func__); |
| |
| if ((mci = edac_mc_del_mc(&pdev->dev)) == NULL) |
| return; |
| |
| pvt = (struct e752x_pvt *) mci->pvt_info; |
| pci_dev_put(pvt->dev_d0f0); |
| pci_dev_put(pvt->dev_d0f1); |
| pci_dev_put(pvt->bridge_ck); |
| edac_mc_free(mci); |
| } |
| |
| static const struct pci_device_id e752x_pci_tbl[] __devinitdata = { |
| { |
| PCI_VEND_DEV(INTEL, 7520_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| E7520 |
| }, |
| { |
| PCI_VEND_DEV(INTEL, 7525_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| E7525 |
| }, |
| { |
| PCI_VEND_DEV(INTEL, 7320_0), PCI_ANY_ID, PCI_ANY_ID, 0, 0, |
| E7320 |
| }, |
| { |
| 0, |
| } /* 0 terminated list. */ |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, e752x_pci_tbl); |
| |
| static struct pci_driver e752x_driver = { |
| .name = EDAC_MOD_STR, |
| .probe = e752x_init_one, |
| .remove = __devexit_p(e752x_remove_one), |
| .id_table = e752x_pci_tbl, |
| }; |
| |
| static int __init e752x_init(void) |
| { |
| int pci_rc; |
| |
| debugf3("%s()\n", __func__); |
| pci_rc = pci_register_driver(&e752x_driver); |
| return (pci_rc < 0) ? pci_rc : 0; |
| } |
| |
| static void __exit e752x_exit(void) |
| { |
| debugf3("%s()\n", __func__); |
| pci_unregister_driver(&e752x_driver); |
| } |
| |
| module_init(e752x_init); |
| module_exit(e752x_exit); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Linux Networx (http://lnxi.com) Tom Zimmerman\n"); |
| MODULE_DESCRIPTION("MC support for Intel e752x memory controllers"); |
| |
| module_param(force_function_unhide, int, 0444); |
| MODULE_PARM_DESC(force_function_unhide, "if BIOS sets Dev0:Fun1 up as hidden:" |
| " 1=force unhide and hope BIOS doesn't fight driver for Dev0:Fun1 access"); |
| |