arch/mips/kernel/scall32-o32.S

/*
 * This file is subject to the terms and conditions of the GNU General Public
 * License.  See the file "COPYING" in the main directory of this archive
 * for more details.
 *
 * Copyright (C) 1995, 96, 97, 98, 99, 2000, 01, 02 by Ralf Baechle
 * Copyright (C) 2001 MIPS Technologies, Inc.
 * Copyright (C) 2004 Thiemo Seufer
 */
#include <linux/config.h>
#include <linux/errno.h>
#include <asm/asm.h>
#include <asm/asmmacro.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
#include <asm/isadep.h>
#include <asm/sysmips.h>
#include <asm/thread_info.h>
#include <asm/unistd.h>
#include <asm/war.h>
#include <asm/asm-offsets.h>

/* Highest syscall used of any syscall flavour */
#define MAX_SYSCALL_NO	__NR_O32_Linux + __NR_O32_Linux_syscalls

	.align  5
NESTED(handle_sys, PT_SIZE, sp)
	.set	noat
	SAVE_SOME
	STI
	.set	at

	lw	t1, PT_EPC(sp)		# skip syscall on return

#if defined(CONFIG_BINFMT_IRIX)
	sltiu	t0, v0, MAX_SYSCALL_NO + 1 # check syscall number
#else
	subu	v0, v0, __NR_O32_Linux	# check syscall number
	sltiu	t0, v0, __NR_O32_Linux_syscalls + 1
#endif
	addiu	t1, 4			# skip to next instruction
	sw	t1, PT_EPC(sp)
	beqz	t0, illegal_syscall

	sll	t0, v0, 3
	la	t1, sys_call_table
	addu	t1, t0
	lw	t2, (t1)		# syscall routine
	lw	t3, 4(t1)		# >= 0 if we need stack arguments
	beqz	t2, illegal_syscall

	sw	a3, PT_R26(sp)		# save a3 for syscall restarting
	bgez	t3, stackargs

stack_done:
	lw	t0, TI_FLAGS($28)	# syscall tracing enabled?
	li	t1, _TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT
	and	t0, t1
	bnez	t0, syscall_trace_entry	# -> yes

	jalr	t2			# Do The Real Thing (TM)

	li	t0, -EMAXERRNO - 1	# error?
	sltu	t0, t0, v0
	sw	t0, PT_R7(sp)		# set error flag
	beqz	t0, 1f

	negu	v0			# error
	sw	v0, PT_R0(sp)		# set flag for syscall
					# restarting
1:	sw	v0, PT_R2(sp)		# result

o32_syscall_exit:
	local_irq_disable		# make sure need_resched and
					# signals dont change between
					# sampling and return
	lw	a2, TI_FLAGS($28)	# current->work
	li	t0, _TIF_ALLWORK_MASK
	and	t0, a2
	bnez	t0, o32_syscall_exit_work

	j	restore_partial

o32_syscall_exit_work:
	j	syscall_exit_work_partial

/* ------------------------------------------------------------------------ */

syscall_trace_entry:
	SAVE_STATIC
	move	s0, t2
	move	a0, sp
	li	a1, 0
	jal	do_syscall_trace

	move	t0, s0
	RESTORE_STATIC
	lw	a0, PT_R4(sp)		# Restore argument registers
	lw	a1, PT_R5(sp)
	lw	a2, PT_R6(sp)
	lw	a3, PT_R7(sp)
	jalr	t0

	li	t0, -EMAXERRNO - 1	# error?
	sltu	t0, t0, v0
	sw	t0, PT_R7(sp)		# set error flag
	beqz	t0, 1f

	negu	v0			# error
	sw	v0, PT_R0(sp)		# set flag for syscall
					# restarting
1:	sw	v0, PT_R2(sp)		# result

	j	syscall_exit

/* ------------------------------------------------------------------------ */

	/*
	 * More than four arguments.  Try to deal with it by copying the
	 * stack arguments from the user stack to the kernel stack.
	 * This Sucks (TM).
	 */
stackargs:
	lw	t0, PT_R29(sp)		# get old user stack pointer

	/*
	 * We intentionally keep the kernel stack a little below the top of
	 * userspace so we don't have to do a slower byte accurate check here.
	 */
	lw	t5, TI_ADDR_LIMIT($28)
	addu	t4, t0, 32
	and	t5, t4
	bltz	t5, bad_stack		# -> sp is bad

	/* Ok, copy the args from the luser stack to the kernel stack.
	 * t3 is the precomputed number of instruction bytes needed to
	 * load or store arguments 6-8.
	 */

	la	t1, 5f			# load up to 3 arguments
	subu	t1, t3
1:	lw	t5, 16(t0)		# argument #5 from usp
	.set    push
	.set    noreorder
	.set	nomacro
	jr	t1
	 addiu	t1, 6f - 5f

2:	lw	t8, 28(t0)		# argument #8 from usp
3:	lw	t7, 24(t0)		# argument #7 from usp
4:	lw	t6, 20(t0)		# argument #6 from usp
5:	jr	t1
	 sw	t5, 16(sp)		# argument #5 to ksp

	sw	t8, 28(sp)		# argument #8 to ksp
	sw	t7, 24(sp)		# argument #7 to ksp
	sw	t6, 20(sp)		# argument #6 to ksp
6:	j	stack_done		# go back
	 nop
	.set	pop

	.section __ex_table,"a"
	PTR	1b,bad_stack
	PTR	2b,bad_stack
	PTR	3b,bad_stack
	PTR	4b,bad_stack
	.previous

	/*
	 * The stackpointer for a call with more than 4 arguments is bad.
	 * We probably should handle this case a bit more drastic.
	 */
bad_stack:
	negu	v0				# error
	sw	v0, PT_R0(sp)
	sw	v0, PT_R2(sp)
	li	t0, 1				# set error flag
	sw	t0, PT_R7(sp)
	j	o32_syscall_exit

	/*
	 * The system call does not exist in this kernel
	 */
illegal_syscall:
	li	v0, -ENOSYS			# error
	sw	v0, PT_R2(sp)
	li	t0, 1				# set error flag
	sw	t0, PT_R7(sp)
	j	o32_syscall_exit
	END(handle_sys)

	LEAF(mips_atomic_set)
	andi	v0, a1, 3			# must be word aligned
	bnez	v0, bad_alignment

	lw	v1, TI_ADDR_LIMIT($28)		# in legal address range?
	addiu	a0, a1, 4
	or	a0, a0, a1
	and	a0, a0, v1
	bltz	a0, bad_address

#ifdef CONFIG_CPU_HAS_LLSC
	/* Ok, this is the ll/sc case.  World is sane :-)  */
1:	ll	v0, (a1)
	move	a0, a2
2:	sc	a0, (a1)
#if R10000_LLSC_WAR
	beqzl	a0, 1b
#else
	beqz	a0, 1b
#endif

	.section __ex_table,"a"
	PTR	1b, bad_stack
	PTR	2b, bad_stack
	.previous
#else
	sw	a1, 16(sp)
	sw	a2, 20(sp)

	move	a0, sp
	move	a2, a1
	li	a1, 1
	jal	do_page_fault

	lw	a1, 16(sp)
	lw	a2, 20(sp)

	/*
	 * At this point the page should be readable and writable unless
	 * there was no more memory available.
	 */
1:	lw	v0, (a1)
2:	sw	a2, (a1)

	.section __ex_table,"a"
	PTR	1b, no_mem
	PTR	2b, no_mem
	.previous
#endif

	sw	zero, PT_R7(sp)		# success
	sw	v0, PT_R2(sp)		# result

	j	o32_syscall_exit	# continue like a normal syscall

no_mem:	li	v0, -ENOMEM
	jr	ra

bad_address:
	li	v0, -EFAULT
	jr	ra

bad_alignment:
	li	v0, -EINVAL
	jr	ra
	END(mips_atomic_set)

	LEAF(sys_sysmips)
	beq	a0, MIPS_ATOMIC_SET, mips_atomic_set
	j	_sys_sysmips
	END(sys_sysmips)

	LEAF(sys_syscall)
#if defined(CONFIG_BINFMT_IRIX)
	sltiu	v0, a0, MAX_SYSCALL_NO + 1 # check syscall number
#else
	subu	t0, a0, __NR_O32_Linux	# check syscall number
	sltiu	v0, t0, __NR_O32_Linux_syscalls + 1
#endif
	sll	t1, t0, 3
	beqz	v0, einval

	lw	t2, sys_call_table(t1)		# syscall routine

#if defined(CONFIG_BINFMT_IRIX)
	li	v1, 4000			# nr of sys_syscall
#else
	li	v1, 4000 - __NR_O32_Linux	# index of sys_syscall
#endif
	beq	t0, v1, einval			# do not recurse

	/* Some syscalls like execve get their arguments from struct pt_regs
	   and claim zero arguments in the syscall table. Thus we have to
	   assume the worst case and shuffle around all potential arguments.
	   If you want performance, don't use indirect syscalls. */

	move	a0, a1				# shift argument registers
	move	a1, a2
	move	a2, a3
	lw	a3, 16(sp)
	lw	t4, 20(sp)
	lw	t5, 24(sp)
	lw	t6, 28(sp)
	sw	t4, 16(sp)
	sw	t5, 20(sp)
	sw	t6, 24(sp)
	sw	a0, PT_R4(sp)			# .. and push back a0 - a3, some
	sw	a1, PT_R5(sp)			# syscalls expect them there
	sw	a2, PT_R6(sp)
	sw	a3, PT_R7(sp)
	sw	a3, PT_R26(sp)			# update a3 for syscall restarting
	jr	t2
	/* Unreached */

einval:	li	v0, -EINVAL
	jr	ra
	END(sys_syscall)

	.macro	fifty ptr, nargs, from=1, to=50
	sys	\ptr		\nargs
	.if	\to-\from
	fifty	\ptr,\nargs,"(\from+1)",\to
	.endif
	.endm

	.macro	mille ptr, nargs, from=1, to=20
	fifty	\ptr,\nargs
	.if	\to-\from
	mille	\ptr,\nargs,"(\from+1)",\to
	.endif
	.endm

	.macro	syscalltable
#if defined(CONFIG_BINFMT_IRIX)
	mille	sys_ni_syscall		0	/*    0 -  999 SVR4 flavour */
	mille	sys_ni_syscall		0	/* 1000 - 1999 32-bit IRIX */
	mille	sys_ni_syscall		0	/* 2000 - 2999 BSD43 flavour */
	mille	sys_ni_syscall		0	/* 3000 - 3999 POSIX flavour */
#endif

	sys	sys_syscall		8	/* 4000 */
	sys	sys_exit		1
	sys	sys_fork		0
	sys	sys_read		3
	sys	sys_write		3
	sys	sys_open		3	/* 4005 */
	sys	sys_close		1
	sys	sys_waitpid		3
	sys	sys_creat		2
	sys	sys_link		2
	sys	sys_unlink		1	/* 4010 */
	sys	sys_execve		0
	sys	sys_chdir		1
	sys	sys_time		1
	sys	sys_mknod		3
	sys	sys_chmod		2	/* 4015 */
	sys	sys_lchown		3
	sys	sys_ni_syscall		0
	sys	sys_ni_syscall		0	/* was sys_stat */
	sys	sys_lseek		3
	sys	sys_getpid		0	/* 4020 */
	sys	sys_mount		5
	sys	sys_oldumount		1
	sys	sys_setuid		1
	sys	sys_getuid		0
	sys	sys_stime		1	/* 4025 */
	sys	sys_ptrace		4
	sys	sys_alarm		1
	sys	sys_ni_syscall		0	/* was sys_fstat */
	sys	sys_pause		0
	sys	sys_utime		2	/* 4030 */
	sys	sys_ni_syscall		0
	sys	sys_ni_syscall		0
	sys	sys_access		2
	sys	sys_nice		1
	sys	sys_ni_syscall		0	/* 4035 */
	sys	sys_sync		0
	sys	sys_kill		2
	sys	sys_rename		2
	sys	sys_mkdir		2
	sys	sys_rmdir		1	/* 4040 */
	sys	sys_dup			1
	sys	sys_pipe		0
	sys	sys_times		1
	sys	sys_ni_syscall		0
	sys	sys_brk			1	/* 4045 */
	sys	sys_setgid		1
	sys	sys_getgid		0
	sys	sys_ni_syscall		0	/* was signal(2) */
	sys	sys_geteuid		0
	sys	sys_getegid		0	/* 4050 */
	sys	sys_acct		1
	sys	sys_umount		2
	sys	sys_ni_syscall		0
	sys	sys_ioctl		3
	sys	sys_fcntl		3	/* 4055 */
	sys	sys_ni_syscall		2
	sys	sys_setpgid		2
	sys	sys_ni_syscall		0
	sys	sys_olduname		1
	sys	sys_umask		1	/* 4060 */
	sys	sys_chroot		1
	sys	sys_ustat		2
	sys	sys_dup2		2
	sys	sys_getppid		0
	sys	sys_getpgrp		0	/* 4065 */
	sys	sys_setsid		0
	sys	sys_sigaction		3
	sys	sys_sgetmask		0
	sys	sys_ssetmask		1
	sys	sys_setreuid		2	/* 4070 */
	sys	sys_setregid		2
	sys	sys_sigsuspend		0
	sys	sys_sigpending		1
	sys	sys_sethostname		2
	sys	sys_setrlimit		2	/* 4075 */
	sys	sys_getrlimit		2
	sys	sys_getrusage		2
	sys	sys_gettimeofday	2
	sys	sys_settimeofday	2
	sys	sys_getgroups		2	/* 4080 */
	sys	sys_setgroups		2
	sys	sys_ni_syscall		0	/* old_select */
	sys	sys_symlink		2
	sys	sys_ni_syscall		0	/* was sys_lstat */
	sys	sys_readlink		3	/* 4085 */
	sys	sys_uselib		1
	sys	sys_swapon		2
	sys	sys_reboot		3
	sys	old_readdir		3
	sys	old_mmap		6	/* 4090 */
	sys	sys_munmap		2
	sys	sys_truncate		2
	sys	sys_ftruncate		2
	sys	sys_fchmod		2
	sys	sys_fchown		3	/* 4095 */
	sys	sys_getpriority		2
	sys	sys_setpriority		3
	sys	sys_ni_syscall		0
	sys	sys_statfs		2
	sys	sys_fstatfs		2	/* 4100 */
	sys	sys_ni_syscall		0	/* was ioperm(2) */
	sys	sys_socketcall		2
	sys	sys_syslog		3
	sys	sys_setitimer		3
	sys	sys_getitimer		2	/* 4105 */
	sys	sys_newstat		2
	sys	sys_newlstat		2
	sys	sys_newfstat		2
	sys	sys_uname		1
	sys	sys_ni_syscall		0	/* 4110 was iopl(2) */
	sys	sys_vhangup		0
	sys	sys_ni_syscall		0	/* was sys_idle() */
	sys	sys_ni_syscall		0	/* was sys_vm86 */
	sys	sys_wait4		4
	sys	sys_swapoff		1	/* 4115 */
	sys	sys_sysinfo		1
	sys	sys_ipc			6
	sys	sys_fsync		1
	sys	sys_sigreturn		0
	sys	sys_clone		0	/* 4120 */
	sys	sys_setdomainname	2
	sys	sys_newuname		1
	sys	sys_ni_syscall		0	/* sys_modify_ldt */
	sys	sys_adjtimex		1
	sys	sys_mprotect		3	/* 4125 */
	sys	sys_sigprocmask		3
	sys	sys_ni_syscall		0	/* was create_module */
	sys	sys_init_module		5
	sys	sys_delete_module	1
	sys	sys_ni_syscall		0	/* 4130	was get_kernel_syms */
	sys	sys_quotactl		4
	sys	sys_getpgid		1
	sys	sys_fchdir		1
	sys	sys_bdflush		2
	sys	sys_sysfs		3	/* 4135 */
	sys	sys_personality		1
	sys	sys_ni_syscall		0	/* for afs_syscall */
	sys	sys_setfsuid		1
	sys	sys_setfsgid		1
	sys	sys_llseek		5	/* 4140 */
	sys	sys_getdents		3
	sys	sys_select		5
	sys	sys_flock		2
	sys	sys_msync		3
	sys	sys_readv		3	/* 4145 */
	sys	sys_writev		3
	sys	sys_cacheflush		3
	sys	sys_cachectl		3
	sys	sys_sysmips		4
	sys	sys_ni_syscall		0	/* 4150 */
	sys	sys_getsid		1
	sys	sys_fdatasync		1
	sys	sys_sysctl		1
	sys	sys_mlock		2
	sys	sys_munlock		2	/* 4155 */
	sys	sys_mlockall		1
	sys	sys_munlockall		0
	sys	sys_sched_setparam	2
	sys	sys_sched_getparam	2
	sys	sys_sched_setscheduler	3	/* 4160 */
	sys	sys_sched_getscheduler	1
	sys	sys_sched_yield		0
	sys	sys_sched_get_priority_max 1
	sys	sys_sched_get_priority_min 1
	sys	sys_sched_rr_get_interval 2	/* 4165 */
	sys	sys_nanosleep,		2
	sys	sys_mremap,		5
	sys	sys_accept		3
	sys	sys_bind		3
	sys	sys_connect		3	/* 4170 */
	sys	sys_getpeername		3
	sys	sys_getsockname		3
	sys	sys_getsockopt		5
	sys	sys_listen		2
	sys	sys_recv		4	/* 4175 */
	sys	sys_recvfrom		6
	sys	sys_recvmsg		3
	sys	sys_send		4
	sys	sys_sendmsg		3
	sys	sys_sendto		6	/* 4180 */
	sys	sys_setsockopt		5
	sys	sys_shutdown		2
	sys	sys_socket		3
	sys	sys_socketpair		4
	sys	sys_setresuid		3	/* 4185 */
	sys	sys_getresuid		3
	sys	sys_ni_syscall		0	/* was sys_query_module */
	sys	sys_poll		3
	sys	sys_nfsservctl		3
	sys	sys_setresgid		3	/* 4190 */
	sys	sys_getresgid		3
	sys	sys_prctl		5
	sys	sys_rt_sigreturn	0
	sys	sys_rt_sigaction	4
	sys	sys_rt_sigprocmask	4	/* 4195 */
	sys	sys_rt_sigpending	2
	sys	sys_rt_sigtimedwait	4
	sys	sys_rt_sigqueueinfo	3
	sys	sys_rt_sigsuspend	0
	sys	sys_pread64		6	/* 4200 */
	sys	sys_pwrite64		6
	sys	sys_chown		3
	sys	sys_getcwd		2
	sys	sys_capget		2
	sys	sys_capset		2	/* 4205 */
	sys	sys_sigaltstack		0
	sys	sys_sendfile		4
	sys	sys_ni_syscall		0
	sys	sys_ni_syscall		0
	sys	sys_mmap2		6	/* 4210 */
	sys	sys_truncate64		4
	sys	sys_ftruncate64		4
	sys	sys_stat64		2
	sys	sys_lstat64		2
	sys	sys_fstat64		2	/* 4215 */
	sys	sys_pivot_root		2
	sys	sys_mincore		3
	sys	sys_madvise		3
	sys	sys_getdents64		3
	sys	sys_fcntl64		3	/* 4220 */
	sys	sys_ni_syscall		0
	sys	sys_gettid		0
	sys	sys_readahead		5
	sys	sys_setxattr		5
	sys	sys_lsetxattr		5	/* 4225 */
	sys	sys_fsetxattr		5
	sys	sys_getxattr		4
	sys	sys_lgetxattr		4
	sys	sys_fgetxattr		4
	sys	sys_listxattr		3	/* 4230 */
	sys	sys_llistxattr		3
	sys	sys_flistxattr		3
	sys	sys_removexattr		2
	sys	sys_lremovexattr	2
	sys	sys_fremovexattr	2	/* 4235 */
	sys	sys_tkill		2
	sys	sys_sendfile64		5
	sys	sys_futex		6
#ifdef CONFIG_MIPS_MT_FPAFF
	/*
	 * For FPU affinity scheduling on MIPS MT processors, we need to
	 * intercept sys_sched_xxxaffinity() calls until we get a proper hook
	 * in kernel/sched.c.  Considered only temporary we only support these
	 * hooks for the 32-bit kernel - there is no MIPS64 MT processor atm.
	 */
	sys	mipsmt_sys_sched_setaffinity	3
	sys	mipsmt_sys_sched_getaffinity	3
#else
	sys	sys_sched_setaffinity	3
	sys	sys_sched_getaffinity	3	/* 4240 */
#endif /* CONFIG_MIPS_MT_FPAFF */
	sys	sys_io_setup		2
	sys	sys_io_destroy		1
	sys	sys_io_getevents	5
	sys	sys_io_submit		3
	sys	sys_io_cancel		3	/* 4245 */
	sys	sys_exit_group		1
	sys	sys_lookup_dcookie	4
	sys	sys_epoll_create	1
	sys	sys_epoll_ctl		4
	sys	sys_epoll_wait		3	/* 4250 */
	sys	sys_remap_file_pages	5
	sys	sys_set_tid_address	1
	sys	sys_restart_syscall	0
	sys	sys_fadvise64_64	7
	sys	sys_statfs64		3	/* 4255 */
	sys	sys_fstatfs64		2
	sys	sys_timer_create	3
	sys	sys_timer_settime	4
	sys	sys_timer_gettime	2
	sys	sys_timer_getoverrun	1	/* 4260 */
	sys	sys_timer_delete	1
	sys	sys_clock_settime	2
	sys	sys_clock_gettime	2
	sys	sys_clock_getres	2
	sys	sys_clock_nanosleep	4	/* 4265 */
	sys	sys_tgkill		3
	sys	sys_utimes		2
	sys	sys_mbind		4
	sys	sys_ni_syscall		0	/* sys_get_mempolicy */
	sys	sys_ni_syscall		0	/* 4270 sys_set_mempolicy */
	sys	sys_mq_open		4
	sys	sys_mq_unlink		1
	sys	sys_mq_timedsend	5
	sys	sys_mq_timedreceive	5
	sys	sys_mq_notify		2	/* 4275 */
	sys	sys_mq_getsetattr	3
	sys	sys_ni_syscall		0	/* sys_vserver */
	sys	sys_waitid		5
	sys	sys_ni_syscall		0	/* available, was setaltroot */
	sys	sys_add_key		5	/* 4280 */
	sys	sys_request_key		4
	sys	sys_keyctl		5
	sys	sys_set_thread_area	1
	sys	sys_inotify_init	0
	sys	sys_inotify_add_watch	3	/* 4285 */
	sys	sys_inotify_rm_watch	2
	sys	sys_migrate_pages	4
	sys	sys_openat		4
	sys	sys_mkdirat		3
	sys	sys_mknodat		4	/* 4290 */
	sys	sys_fchownat		5
	sys	sys_futimesat		3
	sys	sys_fstatat64		4
	sys	sys_unlinkat		3
	sys	sys_renameat		4	/* 4295 */
	sys	sys_linkat		5
	sys	sys_symlinkat		3
	sys	sys_readlinkat		4
	sys	sys_fchmodat		3
	sys	sys_faccessat		3	/* 4300 */
	sys	sys_pselect6		6
	sys	sys_ppoll		5
	sys	sys_unshare		1
	sys	sys_splice		4
	sys	sys_sync_file_range	7	/* 4305 */
	sys	sys_tee			4
	.endm

	/* We pre-compute the number of _instruction_ bytes needed to
	   load or store the arguments 6-8. Negative values are ignored. */

	.macro  sys function, nargs
	PTR	\function
	LONG	(\nargs << 2) - (5 << 2)
	.endm

	.align	3
	.type	sys_call_table,@object
EXPORT(sys_call_table)
	syscalltable
	.size	sys_call_table, . - sys_call_table