| /* |
| * vsp1_drv.c -- R-Car VSP1 Driver |
| * |
| * Copyright (C) 2013 Renesas Corporation |
| * |
| * Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com) |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/videodev2.h> |
| |
| #include "vsp1.h" |
| #include "vsp1_lif.h" |
| #include "vsp1_rwpf.h" |
| #include "vsp1_uds.h" |
| |
| /* ----------------------------------------------------------------------------- |
| * Interrupt Handling |
| */ |
| |
| static irqreturn_t vsp1_irq_handler(int irq, void *data) |
| { |
| u32 mask = VI6_WFP_IRQ_STA_DFE | VI6_WFP_IRQ_STA_FRE; |
| struct vsp1_device *vsp1 = data; |
| irqreturn_t ret = IRQ_NONE; |
| unsigned int i; |
| |
| for (i = 0; i < vsp1->pdata->wpf_count; ++i) { |
| struct vsp1_rwpf *wpf = vsp1->wpf[i]; |
| struct vsp1_pipeline *pipe; |
| u32 status; |
| |
| if (wpf == NULL) |
| continue; |
| |
| pipe = to_vsp1_pipeline(&wpf->entity.subdev.entity); |
| status = vsp1_read(vsp1, VI6_WPF_IRQ_STA(i)); |
| vsp1_write(vsp1, VI6_WPF_IRQ_STA(i), ~status & mask); |
| |
| if (status & VI6_WFP_IRQ_STA_FRE) { |
| vsp1_pipeline_frame_end(pipe); |
| ret = IRQ_HANDLED; |
| } |
| } |
| |
| return ret; |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Entities |
| */ |
| |
| /* |
| * vsp1_create_links - Create links from all sources to the given sink |
| * |
| * This function creates media links from all valid sources to the given sink |
| * pad. Links that would be invalid according to the VSP1 hardware capabilities |
| * are skipped. Those include all links |
| * |
| * - from a UDS to a UDS (UDS entities can't be chained) |
| * - from an entity to itself (no loops are allowed) |
| */ |
| static int vsp1_create_links(struct vsp1_device *vsp1, struct vsp1_entity *sink) |
| { |
| struct media_entity *entity = &sink->subdev.entity; |
| struct vsp1_entity *source; |
| unsigned int pad; |
| int ret; |
| |
| list_for_each_entry(source, &vsp1->entities, list_dev) { |
| u32 flags; |
| |
| if (source->type == sink->type) |
| continue; |
| |
| if (source->type == VSP1_ENTITY_LIF || |
| source->type == VSP1_ENTITY_WPF) |
| continue; |
| |
| flags = source->type == VSP1_ENTITY_RPF && |
| sink->type == VSP1_ENTITY_WPF && |
| source->index == sink->index |
| ? MEDIA_LNK_FL_ENABLED : 0; |
| |
| for (pad = 0; pad < entity->num_pads; ++pad) { |
| if (!(entity->pads[pad].flags & MEDIA_PAD_FL_SINK)) |
| continue; |
| |
| ret = media_entity_create_link(&source->subdev.entity, |
| source->source_pad, |
| entity, pad, flags); |
| if (ret < 0) |
| return ret; |
| |
| if (flags & MEDIA_LNK_FL_ENABLED) |
| source->sink = entity; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void vsp1_destroy_entities(struct vsp1_device *vsp1) |
| { |
| struct vsp1_entity *entity; |
| struct vsp1_entity *next; |
| |
| list_for_each_entry_safe(entity, next, &vsp1->entities, list_dev) { |
| list_del(&entity->list_dev); |
| vsp1_entity_destroy(entity); |
| } |
| |
| v4l2_device_unregister(&vsp1->v4l2_dev); |
| media_device_unregister(&vsp1->media_dev); |
| } |
| |
| static int vsp1_create_entities(struct vsp1_device *vsp1) |
| { |
| struct media_device *mdev = &vsp1->media_dev; |
| struct v4l2_device *vdev = &vsp1->v4l2_dev; |
| struct vsp1_entity *entity; |
| unsigned int i; |
| int ret; |
| |
| mdev->dev = vsp1->dev; |
| strlcpy(mdev->model, "VSP1", sizeof(mdev->model)); |
| snprintf(mdev->bus_info, sizeof(mdev->bus_info), "platform:%s", |
| dev_name(mdev->dev)); |
| ret = media_device_register(mdev); |
| if (ret < 0) { |
| dev_err(vsp1->dev, "media device registration failed (%d)\n", |
| ret); |
| return ret; |
| } |
| |
| vdev->mdev = mdev; |
| ret = v4l2_device_register(vsp1->dev, vdev); |
| if (ret < 0) { |
| dev_err(vsp1->dev, "V4L2 device registration failed (%d)\n", |
| ret); |
| goto done; |
| } |
| |
| /* Instantiate all the entities. */ |
| if (vsp1->pdata->features & VSP1_HAS_LIF) { |
| vsp1->lif = vsp1_lif_create(vsp1); |
| if (IS_ERR(vsp1->lif)) { |
| ret = PTR_ERR(vsp1->lif); |
| goto done; |
| } |
| |
| list_add_tail(&vsp1->lif->entity.list_dev, &vsp1->entities); |
| } |
| |
| for (i = 0; i < vsp1->pdata->rpf_count; ++i) { |
| struct vsp1_rwpf *rpf; |
| |
| rpf = vsp1_rpf_create(vsp1, i); |
| if (IS_ERR(rpf)) { |
| ret = PTR_ERR(rpf); |
| goto done; |
| } |
| |
| vsp1->rpf[i] = rpf; |
| list_add_tail(&rpf->entity.list_dev, &vsp1->entities); |
| } |
| |
| for (i = 0; i < vsp1->pdata->uds_count; ++i) { |
| struct vsp1_uds *uds; |
| |
| uds = vsp1_uds_create(vsp1, i); |
| if (IS_ERR(uds)) { |
| ret = PTR_ERR(uds); |
| goto done; |
| } |
| |
| vsp1->uds[i] = uds; |
| list_add_tail(&uds->entity.list_dev, &vsp1->entities); |
| } |
| |
| for (i = 0; i < vsp1->pdata->wpf_count; ++i) { |
| struct vsp1_rwpf *wpf; |
| |
| wpf = vsp1_wpf_create(vsp1, i); |
| if (IS_ERR(wpf)) { |
| ret = PTR_ERR(wpf); |
| goto done; |
| } |
| |
| vsp1->wpf[i] = wpf; |
| list_add_tail(&wpf->entity.list_dev, &vsp1->entities); |
| } |
| |
| /* Create links. */ |
| list_for_each_entry(entity, &vsp1->entities, list_dev) { |
| if (entity->type == VSP1_ENTITY_LIF || |
| entity->type == VSP1_ENTITY_RPF) |
| continue; |
| |
| ret = vsp1_create_links(vsp1, entity); |
| if (ret < 0) |
| goto done; |
| } |
| |
| if (vsp1->pdata->features & VSP1_HAS_LIF) { |
| ret = media_entity_create_link( |
| &vsp1->wpf[0]->entity.subdev.entity, RWPF_PAD_SOURCE, |
| &vsp1->lif->entity.subdev.entity, LIF_PAD_SINK, 0); |
| if (ret < 0) |
| return ret; |
| } |
| |
| /* Register all subdevs. */ |
| list_for_each_entry(entity, &vsp1->entities, list_dev) { |
| ret = v4l2_device_register_subdev(&vsp1->v4l2_dev, |
| &entity->subdev); |
| if (ret < 0) |
| goto done; |
| } |
| |
| ret = v4l2_device_register_subdev_nodes(&vsp1->v4l2_dev); |
| |
| done: |
| if (ret < 0) |
| vsp1_destroy_entities(vsp1); |
| |
| return ret; |
| } |
| |
| static int vsp1_device_init(struct vsp1_device *vsp1) |
| { |
| unsigned int i; |
| u32 status; |
| |
| /* Reset any channel that might be running. */ |
| status = vsp1_read(vsp1, VI6_STATUS); |
| |
| for (i = 0; i < vsp1->pdata->wpf_count; ++i) { |
| unsigned int timeout; |
| |
| if (!(status & VI6_STATUS_SYS_ACT(i))) |
| continue; |
| |
| vsp1_write(vsp1, VI6_SRESET, VI6_SRESET_SRTS(i)); |
| for (timeout = 10; timeout > 0; --timeout) { |
| status = vsp1_read(vsp1, VI6_STATUS); |
| if (!(status & VI6_STATUS_SYS_ACT(i))) |
| break; |
| |
| usleep_range(1000, 2000); |
| } |
| |
| if (!timeout) { |
| dev_err(vsp1->dev, "failed to reset wpf.%u\n", i); |
| return -ETIMEDOUT; |
| } |
| } |
| |
| vsp1_write(vsp1, VI6_CLK_DCSWT, (8 << VI6_CLK_DCSWT_CSTPW_SHIFT) | |
| (8 << VI6_CLK_DCSWT_CSTRW_SHIFT)); |
| |
| for (i = 0; i < vsp1->pdata->rpf_count; ++i) |
| vsp1_write(vsp1, VI6_DPR_RPF_ROUTE(i), VI6_DPR_NODE_UNUSED); |
| |
| for (i = 0; i < vsp1->pdata->uds_count; ++i) |
| vsp1_write(vsp1, VI6_DPR_UDS_ROUTE(i), VI6_DPR_NODE_UNUSED); |
| |
| vsp1_write(vsp1, VI6_DPR_SRU_ROUTE, VI6_DPR_NODE_UNUSED); |
| vsp1_write(vsp1, VI6_DPR_LUT_ROUTE, VI6_DPR_NODE_UNUSED); |
| vsp1_write(vsp1, VI6_DPR_CLU_ROUTE, VI6_DPR_NODE_UNUSED); |
| vsp1_write(vsp1, VI6_DPR_HST_ROUTE, VI6_DPR_NODE_UNUSED); |
| vsp1_write(vsp1, VI6_DPR_HSI_ROUTE, VI6_DPR_NODE_UNUSED); |
| vsp1_write(vsp1, VI6_DPR_BRU_ROUTE, VI6_DPR_NODE_UNUSED); |
| |
| vsp1_write(vsp1, VI6_DPR_HGO_SMPPT, (7 << VI6_DPR_SMPPT_TGW_SHIFT) | |
| (VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT)); |
| vsp1_write(vsp1, VI6_DPR_HGT_SMPPT, (7 << VI6_DPR_SMPPT_TGW_SHIFT) | |
| (VI6_DPR_NODE_UNUSED << VI6_DPR_SMPPT_PT_SHIFT)); |
| |
| return 0; |
| } |
| |
| static int vsp1_clocks_enable(struct vsp1_device *vsp1) |
| { |
| int ret; |
| |
| ret = clk_prepare_enable(vsp1->clock); |
| if (ret < 0) |
| return ret; |
| |
| if (IS_ERR(vsp1->rt_clock)) |
| return 0; |
| |
| ret = clk_prepare_enable(vsp1->rt_clock); |
| if (ret < 0) { |
| clk_disable_unprepare(vsp1->clock); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void vsp1_clocks_disable(struct vsp1_device *vsp1) |
| { |
| if (!IS_ERR(vsp1->rt_clock)) |
| clk_disable_unprepare(vsp1->rt_clock); |
| clk_disable_unprepare(vsp1->clock); |
| } |
| |
| /* |
| * vsp1_device_get - Acquire the VSP1 device |
| * |
| * Increment the VSP1 reference count and initialize the device if the first |
| * reference is taken. |
| * |
| * Return a pointer to the VSP1 device or NULL if an error occurred. |
| */ |
| struct vsp1_device *vsp1_device_get(struct vsp1_device *vsp1) |
| { |
| struct vsp1_device *__vsp1 = vsp1; |
| int ret; |
| |
| mutex_lock(&vsp1->lock); |
| if (vsp1->ref_count > 0) |
| goto done; |
| |
| ret = vsp1_clocks_enable(vsp1); |
| if (ret < 0) { |
| __vsp1 = NULL; |
| goto done; |
| } |
| |
| ret = vsp1_device_init(vsp1); |
| if (ret < 0) { |
| vsp1_clocks_disable(vsp1); |
| __vsp1 = NULL; |
| goto done; |
| } |
| |
| done: |
| if (__vsp1) |
| vsp1->ref_count++; |
| |
| mutex_unlock(&vsp1->lock); |
| return __vsp1; |
| } |
| |
| /* |
| * vsp1_device_put - Release the VSP1 device |
| * |
| * Decrement the VSP1 reference count and cleanup the device if the last |
| * reference is released. |
| */ |
| void vsp1_device_put(struct vsp1_device *vsp1) |
| { |
| mutex_lock(&vsp1->lock); |
| |
| if (--vsp1->ref_count == 0) |
| vsp1_clocks_disable(vsp1); |
| |
| mutex_unlock(&vsp1->lock); |
| } |
| |
| /* ----------------------------------------------------------------------------- |
| * Power Management |
| */ |
| |
| #ifdef CONFIG_PM_SLEEP |
| static int vsp1_pm_suspend(struct device *dev) |
| { |
| struct vsp1_device *vsp1 = dev_get_drvdata(dev); |
| |
| WARN_ON(mutex_is_locked(&vsp1->lock)); |
| |
| if (vsp1->ref_count == 0) |
| return 0; |
| |
| vsp1_clocks_disable(vsp1); |
| return 0; |
| } |
| |
| static int vsp1_pm_resume(struct device *dev) |
| { |
| struct vsp1_device *vsp1 = dev_get_drvdata(dev); |
| |
| WARN_ON(mutex_is_locked(&vsp1->lock)); |
| |
| if (vsp1->ref_count) |
| return 0; |
| |
| return vsp1_clocks_enable(vsp1); |
| } |
| #endif |
| |
| static const struct dev_pm_ops vsp1_pm_ops = { |
| SET_SYSTEM_SLEEP_PM_OPS(vsp1_pm_suspend, vsp1_pm_resume) |
| }; |
| |
| /* ----------------------------------------------------------------------------- |
| * Platform Driver |
| */ |
| |
| static struct vsp1_platform_data * |
| vsp1_get_platform_data(struct platform_device *pdev) |
| { |
| struct vsp1_platform_data *pdata = pdev->dev.platform_data; |
| |
| if (pdata == NULL) { |
| dev_err(&pdev->dev, "missing platform data\n"); |
| return NULL; |
| } |
| |
| if (pdata->rpf_count <= 0 || pdata->rpf_count > VPS1_MAX_RPF) { |
| dev_err(&pdev->dev, "invalid number of RPF (%u)\n", |
| pdata->rpf_count); |
| return NULL; |
| } |
| |
| if (pdata->uds_count <= 0 || pdata->uds_count > VPS1_MAX_UDS) { |
| dev_err(&pdev->dev, "invalid number of UDS (%u)\n", |
| pdata->uds_count); |
| return NULL; |
| } |
| |
| if (pdata->wpf_count <= 0 || pdata->wpf_count > VPS1_MAX_WPF) { |
| dev_err(&pdev->dev, "invalid number of WPF (%u)\n", |
| pdata->wpf_count); |
| return NULL; |
| } |
| |
| return pdata; |
| } |
| |
| static int vsp1_probe(struct platform_device *pdev) |
| { |
| struct vsp1_device *vsp1; |
| struct resource *irq; |
| struct resource *io; |
| int ret; |
| |
| vsp1 = devm_kzalloc(&pdev->dev, sizeof(*vsp1), GFP_KERNEL); |
| if (vsp1 == NULL) |
| return -ENOMEM; |
| |
| vsp1->dev = &pdev->dev; |
| mutex_init(&vsp1->lock); |
| INIT_LIST_HEAD(&vsp1->entities); |
| |
| vsp1->pdata = vsp1_get_platform_data(pdev); |
| if (vsp1->pdata == NULL) |
| return -ENODEV; |
| |
| /* I/O, IRQ and clock resources */ |
| io = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| vsp1->mmio = devm_ioremap_resource(&pdev->dev, io); |
| if (IS_ERR(vsp1->mmio)) |
| return PTR_ERR(vsp1->mmio); |
| |
| vsp1->clock = devm_clk_get(&pdev->dev, NULL); |
| if (IS_ERR(vsp1->clock)) { |
| dev_err(&pdev->dev, "failed to get clock\n"); |
| return PTR_ERR(vsp1->clock); |
| } |
| |
| /* The RT clock is optional */ |
| vsp1->rt_clock = devm_clk_get(&pdev->dev, "rt"); |
| |
| irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| if (!irq) { |
| dev_err(&pdev->dev, "missing IRQ\n"); |
| return -EINVAL; |
| } |
| |
| ret = devm_request_irq(&pdev->dev, irq->start, vsp1_irq_handler, |
| IRQF_SHARED, dev_name(&pdev->dev), vsp1); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to request IRQ\n"); |
| return ret; |
| } |
| |
| /* Instanciate entities */ |
| ret = vsp1_create_entities(vsp1); |
| if (ret < 0) { |
| dev_err(&pdev->dev, "failed to create entities\n"); |
| return ret; |
| } |
| |
| platform_set_drvdata(pdev, vsp1); |
| |
| return 0; |
| } |
| |
| static int vsp1_remove(struct platform_device *pdev) |
| { |
| struct vsp1_device *vsp1 = platform_get_drvdata(pdev); |
| |
| vsp1_destroy_entities(vsp1); |
| |
| return 0; |
| } |
| |
| static struct platform_driver vsp1_platform_driver = { |
| .probe = vsp1_probe, |
| .remove = vsp1_remove, |
| .driver = { |
| .owner = THIS_MODULE, |
| .name = "vsp1", |
| .pm = &vsp1_pm_ops, |
| }, |
| }; |
| |
| module_platform_driver(vsp1_platform_driver); |
| |
| MODULE_ALIAS("vsp1"); |
| MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>"); |
| MODULE_DESCRIPTION("Renesas VSP1 Driver"); |
| MODULE_LICENSE("GPL"); |