| /* |
| * Copyright (C) 2000, 2001 Broadcom Corporation |
| * |
| * Copyright (C) 2002 MontaVista Software Inc. |
| * Author: jsun@mvista.com or jsun@junsun.net |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| #include <linux/bcd.h> |
| #include <linux/types.h> |
| #include <linux/time.h> |
| |
| #include <asm/time.h> |
| #include <asm/addrspace.h> |
| #include <asm/io.h> |
| |
| #include <asm/sibyte/sb1250.h> |
| #include <asm/sibyte/sb1250_regs.h> |
| #include <asm/sibyte/sb1250_smbus.h> |
| |
| |
| /* M41T81 definitions */ |
| |
| /* |
| * Register bits |
| */ |
| |
| #define M41T81REG_SC_ST 0x80 /* stop bit */ |
| #define M41T81REG_HR_CB 0x40 /* century bit */ |
| #define M41T81REG_HR_CEB 0x80 /* century enable bit */ |
| #define M41T81REG_CTL_S 0x20 /* sign bit */ |
| #define M41T81REG_CTL_FT 0x40 /* frequency test bit */ |
| #define M41T81REG_CTL_OUT 0x80 /* output level */ |
| #define M41T81REG_WD_RB0 0x01 /* watchdog resolution bit 0 */ |
| #define M41T81REG_WD_RB1 0x02 /* watchdog resolution bit 1 */ |
| #define M41T81REG_WD_BMB0 0x04 /* watchdog multiplier bit 0 */ |
| #define M41T81REG_WD_BMB1 0x08 /* watchdog multiplier bit 1 */ |
| #define M41T81REG_WD_BMB2 0x10 /* watchdog multiplier bit 2 */ |
| #define M41T81REG_WD_BMB3 0x20 /* watchdog multiplier bit 3 */ |
| #define M41T81REG_WD_BMB4 0x40 /* watchdog multiplier bit 4 */ |
| #define M41T81REG_AMO_ABE 0x20 /* alarm in "battery back-up mode" enable bit */ |
| #define M41T81REG_AMO_SQWE 0x40 /* square wave enable */ |
| #define M41T81REG_AMO_AFE 0x80 /* alarm flag enable flag */ |
| #define M41T81REG_ADT_RPT5 0x40 /* alarm repeat mode bit 5 */ |
| #define M41T81REG_ADT_RPT4 0x80 /* alarm repeat mode bit 4 */ |
| #define M41T81REG_AHR_RPT3 0x80 /* alarm repeat mode bit 3 */ |
| #define M41T81REG_AHR_HT 0x40 /* halt update bit */ |
| #define M41T81REG_AMN_RPT2 0x80 /* alarm repeat mode bit 2 */ |
| #define M41T81REG_ASC_RPT1 0x80 /* alarm repeat mode bit 1 */ |
| #define M41T81REG_FLG_AF 0x40 /* alarm flag (read only) */ |
| #define M41T81REG_FLG_WDF 0x80 /* watchdog flag (read only) */ |
| #define M41T81REG_SQW_RS0 0x10 /* sqw frequency bit 0 */ |
| #define M41T81REG_SQW_RS1 0x20 /* sqw frequency bit 1 */ |
| #define M41T81REG_SQW_RS2 0x40 /* sqw frequency bit 2 */ |
| #define M41T81REG_SQW_RS3 0x80 /* sqw frequency bit 3 */ |
| |
| |
| /* |
| * Register numbers |
| */ |
| |
| #define M41T81REG_TSC 0x00 /* tenths/hundredths of second */ |
| #define M41T81REG_SC 0x01 /* seconds */ |
| #define M41T81REG_MN 0x02 /* minute */ |
| #define M41T81REG_HR 0x03 /* hour/century */ |
| #define M41T81REG_DY 0x04 /* day of week */ |
| #define M41T81REG_DT 0x05 /* date of month */ |
| #define M41T81REG_MO 0x06 /* month */ |
| #define M41T81REG_YR 0x07 /* year */ |
| #define M41T81REG_CTL 0x08 /* control */ |
| #define M41T81REG_WD 0x09 /* watchdog */ |
| #define M41T81REG_AMO 0x0A /* alarm: month */ |
| #define M41T81REG_ADT 0x0B /* alarm: date */ |
| #define M41T81REG_AHR 0x0C /* alarm: hour */ |
| #define M41T81REG_AMN 0x0D /* alarm: minute */ |
| #define M41T81REG_ASC 0x0E /* alarm: second */ |
| #define M41T81REG_FLG 0x0F /* flags */ |
| #define M41T81REG_SQW 0x13 /* square wave register */ |
| |
| #define M41T81_CCR_ADDRESS 0x68 |
| |
| #define SMB_CSR(reg) IOADDR(A_SMB_REGISTER(1, reg)) |
| |
| static int m41t81_read(uint8_t addr) |
| { |
| while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) |
| ; |
| |
| __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); |
| __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR1BYTE, |
| SMB_CSR(R_SMB_START)); |
| |
| while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) |
| ; |
| |
| __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, |
| SMB_CSR(R_SMB_START)); |
| |
| while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) |
| ; |
| |
| if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { |
| /* Clear error bit by writing a 1 */ |
| __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); |
| return -1; |
| } |
| |
| return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); |
| } |
| |
| static int m41t81_write(uint8_t addr, int b) |
| { |
| while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) |
| ; |
| |
| __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_CMD)); |
| __raw_writeq(b & 0xff, SMB_CSR(R_SMB_DATA)); |
| __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, |
| SMB_CSR(R_SMB_START)); |
| |
| while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) |
| ; |
| |
| if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { |
| /* Clear error bit by writing a 1 */ |
| __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); |
| return -1; |
| } |
| |
| /* read the same byte again to make sure it is written */ |
| __raw_writeq(V_SMB_ADDR(M41T81_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, |
| SMB_CSR(R_SMB_START)); |
| |
| while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) |
| ; |
| |
| return 0; |
| } |
| |
| int m41t81_set_time(unsigned long t) |
| { |
| struct rtc_time tm; |
| |
| to_tm(t, &tm); |
| |
| /* |
| * Note the write order matters as it ensures the correctness. |
| * When we write sec, 10th sec is clear. It is reasonable to |
| * believe we should finish writing min within a second. |
| */ |
| |
| tm.tm_sec = BIN2BCD(tm.tm_sec); |
| m41t81_write(M41T81REG_SC, tm.tm_sec); |
| |
| tm.tm_min = BIN2BCD(tm.tm_min); |
| m41t81_write(M41T81REG_MN, tm.tm_min); |
| |
| tm.tm_hour = BIN2BCD(tm.tm_hour); |
| tm.tm_hour = (tm.tm_hour & 0x3f) | (m41t81_read(M41T81REG_HR) & 0xc0); |
| m41t81_write(M41T81REG_HR, tm.tm_hour); |
| |
| /* tm_wday starts from 0 to 6 */ |
| if (tm.tm_wday == 0) tm.tm_wday = 7; |
| tm.tm_wday = BIN2BCD(tm.tm_wday); |
| m41t81_write(M41T81REG_DY, tm.tm_wday); |
| |
| tm.tm_mday = BIN2BCD(tm.tm_mday); |
| m41t81_write(M41T81REG_DT, tm.tm_mday); |
| |
| /* tm_mon starts from 0, *ick* */ |
| tm.tm_mon ++; |
| tm.tm_mon = BIN2BCD(tm.tm_mon); |
| m41t81_write(M41T81REG_MO, tm.tm_mon); |
| |
| /* we don't do century, everything is beyond 2000 */ |
| tm.tm_year %= 100; |
| tm.tm_year = BIN2BCD(tm.tm_year); |
| m41t81_write(M41T81REG_YR, tm.tm_year); |
| |
| return 0; |
| } |
| |
| unsigned long m41t81_get_time(void) |
| { |
| unsigned int year, mon, day, hour, min, sec; |
| |
| /* |
| * min is valid if two reads of sec are the same. |
| */ |
| for (;;) { |
| sec = m41t81_read(M41T81REG_SC); |
| min = m41t81_read(M41T81REG_MN); |
| if (sec == m41t81_read(M41T81REG_SC)) break; |
| } |
| hour = m41t81_read(M41T81REG_HR) & 0x3f; |
| day = m41t81_read(M41T81REG_DT); |
| mon = m41t81_read(M41T81REG_MO); |
| year = m41t81_read(M41T81REG_YR); |
| |
| sec = BCD2BIN(sec); |
| min = BCD2BIN(min); |
| hour = BCD2BIN(hour); |
| day = BCD2BIN(day); |
| mon = BCD2BIN(mon); |
| year = BCD2BIN(year); |
| |
| year += 2000; |
| |
| return mktime(year, mon, day, hour, min, sec); |
| } |
| |
| int m41t81_probe(void) |
| { |
| unsigned int tmp; |
| |
| /* enable chip if it is not enabled yet */ |
| tmp = m41t81_read(M41T81REG_SC); |
| m41t81_write(M41T81REG_SC, tmp & 0x7f); |
| |
| return (m41t81_read(M41T81REG_SC) != -1); |
| } |