| #include "cmd.h" |
| |
| #include <linux/module.h> |
| #include <linux/crc7.h> |
| #include <linux/spi/spi.h> |
| |
| #include "wl12xx.h" |
| #include "wl12xx_80211.h" |
| #include "reg.h" |
| #include "spi.h" |
| #include "ps.h" |
| |
| int wl12xx_cmd_send(struct wl12xx *wl, u16 type, void *buf, size_t buf_len) |
| { |
| struct wl12xx_command cmd; |
| unsigned long timeout; |
| size_t cmd_len; |
| u32 intr; |
| int ret = 0; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.id = type; |
| cmd.status = 0; |
| memcpy(cmd.parameters, buf, buf_len); |
| cmd_len = ALIGN(buf_len, 4) + CMDMBOX_HEADER_LEN; |
| |
| wl12xx_ps_elp_wakeup(wl); |
| |
| wl12xx_spi_mem_write(wl, wl->cmd_box_addr, &cmd, cmd_len); |
| |
| wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_TRIG, INTR_TRIG_CMD); |
| |
| timeout = jiffies + msecs_to_jiffies(WL12XX_COMMAND_TIMEOUT); |
| |
| intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); |
| while (!(intr & wl->chip.intr_cmd_complete)) { |
| if (time_after(jiffies, timeout)) { |
| wl12xx_error("command complete timeout"); |
| ret = -ETIMEDOUT; |
| goto out; |
| } |
| |
| msleep(1); |
| |
| intr = wl12xx_reg_read32(wl, ACX_REG_INTERRUPT_NO_CLEAR); |
| } |
| |
| wl12xx_reg_write32(wl, ACX_REG_INTERRUPT_ACK, |
| wl->chip.intr_cmd_complete); |
| |
| out: |
| wl12xx_ps_elp_sleep(wl); |
| |
| return ret; |
| } |
| |
| int wl12xx_cmd_test(struct wl12xx *wl, void *buf, size_t buf_len, u8 answer) |
| { |
| int ret; |
| |
| wl12xx_debug(DEBUG_CMD, "cmd test"); |
| |
| ret = wl12xx_cmd_send(wl, CMD_TEST, buf, buf_len); |
| if (ret < 0) { |
| wl12xx_warning("TEST command failed"); |
| return ret; |
| } |
| |
| if (answer) { |
| struct wl12xx_command *cmd_answer; |
| |
| /* |
| * The test command got in, we can read the answer. |
| * The answer would be a wl12xx_command, where the |
| * parameter array contains the actual answer. |
| */ |
| |
| wl12xx_ps_elp_wakeup(wl); |
| |
| wl12xx_spi_mem_read(wl, wl->cmd_box_addr, buf, buf_len); |
| |
| wl12xx_ps_elp_sleep(wl); |
| |
| cmd_answer = buf; |
| if (cmd_answer->status != CMD_STATUS_SUCCESS) |
| wl12xx_error("TEST command answer error: %d", |
| cmd_answer->status); |
| } |
| |
| return 0; |
| } |
| |
| |
| int wl12xx_cmd_interrogate(struct wl12xx *wl, u16 ie_id, u16 ie_len, |
| void *answer) |
| { |
| struct wl12xx_command *cmd; |
| struct acx_header header; |
| int ret; |
| |
| wl12xx_debug(DEBUG_CMD, "cmd interrogate"); |
| |
| header.id = ie_id; |
| header.len = ie_len - sizeof(header); |
| |
| ret = wl12xx_cmd_send(wl, CMD_INTERROGATE, &header, sizeof(header)); |
| if (ret < 0) { |
| wl12xx_error("INTERROGATE command failed"); |
| return ret; |
| } |
| |
| wl12xx_ps_elp_wakeup(wl); |
| |
| /* the interrogate command got in, we can read the answer */ |
| wl12xx_spi_mem_read(wl, wl->cmd_box_addr, answer, |
| CMDMBOX_HEADER_LEN + ie_len); |
| |
| wl12xx_ps_elp_sleep(wl); |
| |
| cmd = answer; |
| if (cmd->status != CMD_STATUS_SUCCESS) |
| wl12xx_error("INTERROGATE command error: %d", |
| cmd->status); |
| |
| return 0; |
| |
| } |
| |
| int wl12xx_cmd_configure(struct wl12xx *wl, void *ie, int ie_len) |
| { |
| int ret; |
| |
| wl12xx_debug(DEBUG_CMD, "cmd configure"); |
| |
| ret = wl12xx_cmd_send(wl, CMD_CONFIGURE, ie, |
| ie_len); |
| if (ret < 0) { |
| wl12xx_warning("CONFIGURE command NOK"); |
| return ret; |
| } |
| |
| return 0; |
| |
| } |
| |
| int wl12xx_cmd_vbm(struct wl12xx *wl, u8 identity, |
| void *bitmap, u16 bitmap_len, u8 bitmap_control) |
| { |
| struct vbm_update_request vbm; |
| int ret; |
| |
| wl12xx_debug(DEBUG_CMD, "cmd vbm"); |
| |
| /* Count and period will be filled by the target */ |
| vbm.tim.bitmap_ctrl = bitmap_control; |
| if (bitmap_len > PARTIAL_VBM_MAX) { |
| wl12xx_warning("cmd vbm len is %d B, truncating to %d", |
| bitmap_len, PARTIAL_VBM_MAX); |
| bitmap_len = PARTIAL_VBM_MAX; |
| } |
| memcpy(vbm.tim.pvb_field, bitmap, bitmap_len); |
| vbm.tim.identity = identity; |
| vbm.tim.length = bitmap_len + 3; |
| |
| vbm.len = cpu_to_le16(bitmap_len + 5); |
| |
| ret = wl12xx_cmd_send(wl, CMD_VBM, &vbm, sizeof(vbm)); |
| if (ret < 0) { |
| wl12xx_error("VBM command failed"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int wl12xx_cmd_data_path(struct wl12xx *wl, u8 channel, u8 enable) |
| { |
| int ret; |
| u16 cmd_rx, cmd_tx; |
| |
| wl12xx_debug(DEBUG_CMD, "cmd data path"); |
| |
| if (enable) { |
| cmd_rx = CMD_ENABLE_RX; |
| cmd_tx = CMD_ENABLE_TX; |
| } else { |
| cmd_rx = CMD_DISABLE_RX; |
| cmd_tx = CMD_DISABLE_TX; |
| } |
| |
| ret = wl12xx_cmd_send(wl, cmd_rx, &channel, sizeof(channel)); |
| if (ret < 0) { |
| wl12xx_error("rx %s cmd for channel %d failed", |
| enable ? "start" : "stop", channel); |
| return ret; |
| } |
| |
| wl12xx_debug(DEBUG_BOOT, "rx %s cmd channel %d", |
| enable ? "start" : "stop", channel); |
| |
| ret = wl12xx_cmd_send(wl, cmd_tx, &channel, sizeof(channel)); |
| if (ret < 0) { |
| wl12xx_error("tx %s cmd for channel %d failed", |
| enable ? "start" : "stop", channel); |
| return ret; |
| } |
| |
| wl12xx_debug(DEBUG_BOOT, "tx %s cmd channel %d", |
| enable ? "start" : "stop", channel); |
| |
| return 0; |
| } |
| |
| int wl12xx_cmd_join(struct wl12xx *wl, u8 bss_type, u8 dtim_interval, |
| u16 beacon_interval, u8 wait) |
| { |
| unsigned long timeout; |
| struct cmd_join join = {}; |
| int ret, i; |
| u8 *bssid; |
| |
| /* FIXME: this should be in main.c */ |
| ret = wl12xx_acx_frame_rates(wl, DEFAULT_HW_GEN_TX_RATE, |
| DEFAULT_HW_GEN_MODULATION_TYPE, |
| wl->tx_mgmt_frm_rate, |
| wl->tx_mgmt_frm_mod); |
| if (ret < 0) |
| return ret; |
| |
| wl12xx_debug(DEBUG_CMD, "cmd join"); |
| |
| /* Reverse order BSSID */ |
| bssid = (u8 *)&join.bssid_lsb; |
| for (i = 0; i < ETH_ALEN; i++) |
| bssid[i] = wl->bssid[ETH_ALEN - i - 1]; |
| |
| join.rx_config_options = wl->rx_config; |
| join.rx_filter_options = wl->rx_filter; |
| |
| join.basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS | |
| RATE_MASK_5_5MBPS | RATE_MASK_11MBPS; |
| |
| join.beacon_interval = beacon_interval; |
| join.dtim_interval = dtim_interval; |
| join.bss_type = bss_type; |
| join.channel = wl->channel; |
| join.ctrl = JOIN_CMD_CTRL_TX_FLUSH; |
| |
| ret = wl12xx_cmd_send(wl, CMD_START_JOIN, &join, sizeof(join)); |
| if (ret < 0) { |
| wl12xx_error("failed to initiate cmd join"); |
| return ret; |
| } |
| |
| timeout = msecs_to_jiffies(JOIN_TIMEOUT); |
| |
| /* |
| * ugly hack: we should wait for JOIN_EVENT_COMPLETE_ID but to |
| * simplify locking we just sleep instead, for now |
| */ |
| if (wait) |
| msleep(10); |
| |
| return 0; |
| } |
| |
| int wl12xx_cmd_ps_mode(struct wl12xx *wl, u8 ps_mode) |
| { |
| int ret; |
| struct acx_ps_params ps_params; |
| |
| /* FIXME: this should be in ps.c */ |
| ret = wl12xx_acx_wake_up_conditions(wl, wl->listen_int); |
| if (ret < 0) { |
| wl12xx_error("Couldnt set wake up conditions"); |
| return ret; |
| } |
| |
| wl12xx_debug(DEBUG_CMD, "cmd set ps mode"); |
| |
| ps_params.ps_mode = ps_mode; |
| ps_params.send_null_data = 1; |
| ps_params.retries = 5; |
| ps_params.hang_over_period = 128; |
| ps_params.null_data_rate = 1; /* 1 Mbps */ |
| |
| ret = wl12xx_cmd_send(wl, CMD_SET_PS_MODE, &ps_params, |
| sizeof(ps_params)); |
| if (ret < 0) { |
| wl12xx_error("cmd set_ps_mode failed"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| int wl12xx_cmd_read_memory(struct wl12xx *wl, u32 addr, u32 len, void *answer) |
| { |
| struct cmd_read_write_memory mem_cmd, *mem_answer; |
| struct wl12xx_command cmd; |
| int ret; |
| |
| wl12xx_debug(DEBUG_CMD, "cmd read memory"); |
| |
| memset(&mem_cmd, 0, sizeof(mem_cmd)); |
| mem_cmd.addr = addr; |
| mem_cmd.size = len; |
| |
| ret = wl12xx_cmd_send(wl, CMD_READ_MEMORY, &mem_cmd, sizeof(mem_cmd)); |
| if (ret < 0) { |
| wl12xx_error("read memory command failed: %d", ret); |
| return ret; |
| } |
| |
| /* the read command got in, we can now read the answer */ |
| wl12xx_spi_mem_read(wl, wl->cmd_box_addr, &cmd, |
| CMDMBOX_HEADER_LEN + sizeof(mem_cmd)); |
| |
| if (cmd.status != CMD_STATUS_SUCCESS) |
| wl12xx_error("error in read command result: %d", cmd.status); |
| |
| mem_answer = (struct cmd_read_write_memory *) cmd.parameters; |
| memcpy(answer, mem_answer->value, len); |
| |
| return 0; |
| } |
| |
| int wl12xx_cmd_template_set(struct wl12xx *wl, u16 cmd_id, |
| void *buf, size_t buf_len) |
| { |
| struct wl12xx_cmd_packet_template template; |
| int ret; |
| |
| wl12xx_debug(DEBUG_CMD, "cmd template %d", cmd_id); |
| |
| memset(&template, 0, sizeof(template)); |
| |
| WARN_ON(buf_len > WL12XX_MAX_TEMPLATE_SIZE); |
| buf_len = min_t(size_t, buf_len, WL12XX_MAX_TEMPLATE_SIZE); |
| template.size = cpu_to_le16(buf_len); |
| |
| if (buf) |
| memcpy(template.template, buf, buf_len); |
| |
| ret = wl12xx_cmd_send(wl, cmd_id, &template, |
| sizeof(template.size) + buf_len); |
| if (ret < 0) { |
| wl12xx_warning("cmd set_template failed: %d", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |