| /* Paravirtualization interfaces |
| Copyright (C) 2006 Rusty Russell IBM Corporation |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; if not, write to the Free Software |
| Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA |
| */ |
| #include <linux/errno.h> |
| #include <linux/module.h> |
| #include <linux/efi.h> |
| #include <linux/bcd.h> |
| #include <linux/highmem.h> |
| |
| #include <asm/bug.h> |
| #include <asm/paravirt.h> |
| #include <asm/desc.h> |
| #include <asm/setup.h> |
| #include <asm/arch_hooks.h> |
| #include <asm/time.h> |
| #include <asm/irq.h> |
| #include <asm/delay.h> |
| #include <asm/fixmap.h> |
| #include <asm/apic.h> |
| #include <asm/tlbflush.h> |
| #include <asm/timer.h> |
| |
| /* nop stub */ |
| void _paravirt_nop(void) |
| { |
| } |
| |
| static void __init default_banner(void) |
| { |
| printk(KERN_INFO "Booting paravirtualized kernel on %s\n", |
| paravirt_ops.name); |
| } |
| |
| char *memory_setup(void) |
| { |
| return paravirt_ops.memory_setup(); |
| } |
| |
| /* Simple instruction patching code. */ |
| #define DEF_NATIVE(name, code) \ |
| extern const char start_##name[], end_##name[]; \ |
| asm("start_" #name ": " code "; end_" #name ":") |
| |
| DEF_NATIVE(irq_disable, "cli"); |
| DEF_NATIVE(irq_enable, "sti"); |
| DEF_NATIVE(restore_fl, "push %eax; popf"); |
| DEF_NATIVE(save_fl, "pushf; pop %eax"); |
| DEF_NATIVE(iret, "iret"); |
| DEF_NATIVE(irq_enable_sysexit, "sti; sysexit"); |
| DEF_NATIVE(read_cr2, "mov %cr2, %eax"); |
| DEF_NATIVE(write_cr3, "mov %eax, %cr3"); |
| DEF_NATIVE(read_cr3, "mov %cr3, %eax"); |
| DEF_NATIVE(clts, "clts"); |
| DEF_NATIVE(read_tsc, "rdtsc"); |
| |
| DEF_NATIVE(ud2a, "ud2a"); |
| |
| static unsigned native_patch(u8 type, u16 clobbers, void *insns, unsigned len) |
| { |
| const unsigned char *start, *end; |
| unsigned ret; |
| |
| switch(type) { |
| #define SITE(x) case PARAVIRT_PATCH(x): start = start_##x; end = end_##x; goto patch_site |
| SITE(irq_disable); |
| SITE(irq_enable); |
| SITE(restore_fl); |
| SITE(save_fl); |
| SITE(iret); |
| SITE(irq_enable_sysexit); |
| SITE(read_cr2); |
| SITE(read_cr3); |
| SITE(write_cr3); |
| SITE(clts); |
| SITE(read_tsc); |
| #undef SITE |
| |
| patch_site: |
| ret = paravirt_patch_insns(insns, len, start, end); |
| break; |
| |
| case PARAVIRT_PATCH(make_pgd): |
| case PARAVIRT_PATCH(make_pte): |
| case PARAVIRT_PATCH(pgd_val): |
| case PARAVIRT_PATCH(pte_val): |
| #ifdef CONFIG_X86_PAE |
| case PARAVIRT_PATCH(make_pmd): |
| case PARAVIRT_PATCH(pmd_val): |
| #endif |
| /* These functions end up returning exactly what |
| they're passed, in the same registers. */ |
| ret = paravirt_patch_nop(); |
| break; |
| |
| default: |
| ret = paravirt_patch_default(type, clobbers, insns, len); |
| break; |
| } |
| |
| return ret; |
| } |
| |
| unsigned paravirt_patch_nop(void) |
| { |
| return 0; |
| } |
| |
| unsigned paravirt_patch_ignore(unsigned len) |
| { |
| return len; |
| } |
| |
| unsigned paravirt_patch_call(void *target, u16 tgt_clobbers, |
| void *site, u16 site_clobbers, |
| unsigned len) |
| { |
| unsigned char *call = site; |
| unsigned long delta = (unsigned long)target - (unsigned long)(call+5); |
| |
| if (tgt_clobbers & ~site_clobbers) |
| return len; /* target would clobber too much for this site */ |
| if (len < 5) |
| return len; /* call too long for patch site */ |
| |
| *call++ = 0xe8; /* call */ |
| *(unsigned long *)call = delta; |
| |
| return 5; |
| } |
| |
| unsigned paravirt_patch_jmp(void *target, void *site, unsigned len) |
| { |
| unsigned char *jmp = site; |
| unsigned long delta = (unsigned long)target - (unsigned long)(jmp+5); |
| |
| if (len < 5) |
| return len; /* call too long for patch site */ |
| |
| *jmp++ = 0xe9; /* jmp */ |
| *(unsigned long *)jmp = delta; |
| |
| return 5; |
| } |
| |
| unsigned paravirt_patch_default(u8 type, u16 clobbers, void *site, unsigned len) |
| { |
| void *opfunc = *((void **)¶virt_ops + type); |
| unsigned ret; |
| |
| if (opfunc == NULL) |
| /* If there's no function, patch it with a ud2a (BUG) */ |
| ret = paravirt_patch_insns(site, len, start_ud2a, end_ud2a); |
| else if (opfunc == paravirt_nop) |
| /* If the operation is a nop, then nop the callsite */ |
| ret = paravirt_patch_nop(); |
| else if (type == PARAVIRT_PATCH(iret) || |
| type == PARAVIRT_PATCH(irq_enable_sysexit)) |
| /* If operation requires a jmp, then jmp */ |
| ret = paravirt_patch_jmp(opfunc, site, len); |
| else |
| /* Otherwise call the function; assume target could |
| clobber any caller-save reg */ |
| ret = paravirt_patch_call(opfunc, CLBR_ANY, |
| site, clobbers, len); |
| |
| return ret; |
| } |
| |
| unsigned paravirt_patch_insns(void *site, unsigned len, |
| const char *start, const char *end) |
| { |
| unsigned insn_len = end - start; |
| |
| if (insn_len > len || start == NULL) |
| insn_len = len; |
| else |
| memcpy(site, start, insn_len); |
| |
| return insn_len; |
| } |
| |
| void init_IRQ(void) |
| { |
| paravirt_ops.init_IRQ(); |
| } |
| |
| static void native_flush_tlb(void) |
| { |
| __native_flush_tlb(); |
| } |
| |
| /* |
| * Global pages have to be flushed a bit differently. Not a real |
| * performance problem because this does not happen often. |
| */ |
| static void native_flush_tlb_global(void) |
| { |
| __native_flush_tlb_global(); |
| } |
| |
| static void native_flush_tlb_single(unsigned long addr) |
| { |
| __native_flush_tlb_single(addr); |
| } |
| |
| /* These are in entry.S */ |
| extern void native_iret(void); |
| extern void native_irq_enable_sysexit(void); |
| |
| static int __init print_banner(void) |
| { |
| paravirt_ops.banner(); |
| return 0; |
| } |
| core_initcall(print_banner); |
| |
| static struct resource reserve_ioports = { |
| .start = 0, |
| .end = IO_SPACE_LIMIT, |
| .name = "paravirt-ioport", |
| .flags = IORESOURCE_IO | IORESOURCE_BUSY, |
| }; |
| |
| static struct resource reserve_iomem = { |
| .start = 0, |
| .end = -1, |
| .name = "paravirt-iomem", |
| .flags = IORESOURCE_MEM | IORESOURCE_BUSY, |
| }; |
| |
| /* |
| * Reserve the whole legacy IO space to prevent any legacy drivers |
| * from wasting time probing for their hardware. This is a fairly |
| * brute-force approach to disabling all non-virtual drivers. |
| * |
| * Note that this must be called very early to have any effect. |
| */ |
| int paravirt_disable_iospace(void) |
| { |
| int ret; |
| |
| ret = request_resource(&ioport_resource, &reserve_ioports); |
| if (ret == 0) { |
| ret = request_resource(&iomem_resource, &reserve_iomem); |
| if (ret) |
| release_resource(&reserve_ioports); |
| } |
| |
| return ret; |
| } |
| |
| struct paravirt_ops paravirt_ops = { |
| .name = "bare hardware", |
| .paravirt_enabled = 0, |
| .kernel_rpl = 0, |
| .shared_kernel_pmd = 1, /* Only used when CONFIG_X86_PAE is set */ |
| |
| .patch = native_patch, |
| .banner = default_banner, |
| .arch_setup = paravirt_nop, |
| .memory_setup = machine_specific_memory_setup, |
| .get_wallclock = native_get_wallclock, |
| .set_wallclock = native_set_wallclock, |
| .time_init = hpet_time_init, |
| .init_IRQ = native_init_IRQ, |
| |
| .cpuid = native_cpuid, |
| .get_debugreg = native_get_debugreg, |
| .set_debugreg = native_set_debugreg, |
| .clts = native_clts, |
| .read_cr0 = native_read_cr0, |
| .write_cr0 = native_write_cr0, |
| .read_cr2 = native_read_cr2, |
| .write_cr2 = native_write_cr2, |
| .read_cr3 = native_read_cr3, |
| .write_cr3 = native_write_cr3, |
| .read_cr4 = native_read_cr4, |
| .read_cr4_safe = native_read_cr4_safe, |
| .write_cr4 = native_write_cr4, |
| .save_fl = native_save_fl, |
| .restore_fl = native_restore_fl, |
| .irq_disable = native_irq_disable, |
| .irq_enable = native_irq_enable, |
| .safe_halt = native_safe_halt, |
| .halt = native_halt, |
| .wbinvd = native_wbinvd, |
| .read_msr = native_read_msr_safe, |
| .write_msr = native_write_msr_safe, |
| .read_tsc = native_read_tsc, |
| .read_pmc = native_read_pmc, |
| .sched_clock = native_sched_clock, |
| .get_cpu_khz = native_calculate_cpu_khz, |
| .load_tr_desc = native_load_tr_desc, |
| .set_ldt = native_set_ldt, |
| .load_gdt = native_load_gdt, |
| .load_idt = native_load_idt, |
| .store_gdt = native_store_gdt, |
| .store_idt = native_store_idt, |
| .store_tr = native_store_tr, |
| .load_tls = native_load_tls, |
| .write_ldt_entry = write_dt_entry, |
| .write_gdt_entry = write_dt_entry, |
| .write_idt_entry = write_dt_entry, |
| .load_esp0 = native_load_esp0, |
| |
| .set_iopl_mask = native_set_iopl_mask, |
| .io_delay = native_io_delay, |
| |
| #ifdef CONFIG_X86_LOCAL_APIC |
| .apic_write = native_apic_write, |
| .apic_write_atomic = native_apic_write_atomic, |
| .apic_read = native_apic_read, |
| .setup_boot_clock = setup_boot_APIC_clock, |
| .setup_secondary_clock = setup_secondary_APIC_clock, |
| .startup_ipi_hook = paravirt_nop, |
| #endif |
| .set_lazy_mode = paravirt_nop, |
| |
| .pagetable_setup_start = native_pagetable_setup_start, |
| .pagetable_setup_done = native_pagetable_setup_done, |
| |
| .flush_tlb_user = native_flush_tlb, |
| .flush_tlb_kernel = native_flush_tlb_global, |
| .flush_tlb_single = native_flush_tlb_single, |
| .flush_tlb_others = native_flush_tlb_others, |
| |
| .alloc_pt = paravirt_nop, |
| .alloc_pd = paravirt_nop, |
| .alloc_pd_clone = paravirt_nop, |
| .release_pt = paravirt_nop, |
| .release_pd = paravirt_nop, |
| |
| .set_pte = native_set_pte, |
| .set_pte_at = native_set_pte_at, |
| .set_pmd = native_set_pmd, |
| .pte_update = paravirt_nop, |
| .pte_update_defer = paravirt_nop, |
| |
| #ifdef CONFIG_HIGHPTE |
| .kmap_atomic_pte = kmap_atomic, |
| #endif |
| |
| #ifdef CONFIG_X86_PAE |
| .set_pte_atomic = native_set_pte_atomic, |
| .set_pte_present = native_set_pte_present, |
| .set_pud = native_set_pud, |
| .pte_clear = native_pte_clear, |
| .pmd_clear = native_pmd_clear, |
| |
| .pmd_val = native_pmd_val, |
| .make_pmd = native_make_pmd, |
| #endif |
| |
| .pte_val = native_pte_val, |
| .pgd_val = native_pgd_val, |
| |
| .make_pte = native_make_pte, |
| .make_pgd = native_make_pgd, |
| |
| .irq_enable_sysexit = native_irq_enable_sysexit, |
| .iret = native_iret, |
| |
| .dup_mmap = paravirt_nop, |
| .exit_mmap = paravirt_nop, |
| .activate_mm = paravirt_nop, |
| }; |
| |
| EXPORT_SYMBOL(paravirt_ops); |