| /****************************************************************************** |
| * |
| * Name: actbl1.h - Additional ACPI table definitions |
| * |
| *****************************************************************************/ |
| |
| /* |
| * Copyright (C) 2000 - 2006, R. Byron Moore |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions |
| * are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions, and the following disclaimer, |
| * without modification. |
| * 2. Redistributions in binary form must reproduce at minimum a disclaimer |
| * substantially similar to the "NO WARRANTY" disclaimer below |
| * ("Disclaimer") and any redistribution must be conditioned upon |
| * including a substantially similar Disclaimer requirement for further |
| * binary redistribution. |
| * 3. Neither the names of the above-listed copyright holders nor the names |
| * of any contributors may be used to endorse or promote products derived |
| * from this software without specific prior written permission. |
| * |
| * Alternatively, this software may be distributed under the terms of the |
| * GNU General Public License ("GPL") version 2 as published by the Free |
| * Software Foundation. |
| * |
| * NO WARRANTY |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS |
| * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT |
| * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR |
| * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT |
| * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS |
| * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) |
| * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, |
| * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING |
| * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGES. |
| */ |
| |
| #ifndef __ACTBL1_H__ |
| #define __ACTBL1_H__ |
| |
| /******************************************************************************* |
| * |
| * Additional ACPI Tables |
| * |
| * These tables are not consumed directly by the ACPICA subsystem, but are |
| * included here to support device drivers and the AML disassembler. |
| * |
| ******************************************************************************/ |
| |
| /* |
| * Values for description table header signatures. Useful because they make |
| * it more difficult to inadvertently type in the wrong signature. |
| */ |
| #define ACPI_SIG_ASF "ASF!" /* Alert Standard Format table */ |
| #define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */ |
| #define ACPI_SIG_CPEP "CPEP" /* Corrected Platform Error Polling table */ |
| #define ACPI_SIG_DBGP "DBGP" /* Debug Port table */ |
| #define ACPI_SIG_ECDT "ECDT" /* Embedded Controller Boot Resources Table */ |
| #define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */ |
| #define ACPI_SIG_MADT "APIC" /* Multiple APIC Description Table */ |
| #define ACPI_SIG_MCFG "MCFG" /* PCI Memory Mapped Configuration table */ |
| #define ACPI_SIG_SBST "SBST" /* Smart Battery Specification Table */ |
| #define ACPI_SIG_SLIT "SLIT" /* System Locality Distance Information Table */ |
| #define ACPI_SIG_SPCR "SPCR" /* Serial Port Console Redirection table */ |
| #define ACPI_SIG_SPMI "SPMI" /* Server Platform Management Interface table */ |
| #define ACPI_SIG_SRAT "SRAT" /* System Resource Affinity Table */ |
| #define ACPI_SIG_TCPA "TCPA" /* Trusted Computing Platform Alliance table */ |
| #define ACPI_SIG_WDRT "WDRT" /* Watchdog Resource Table */ |
| |
| /* |
| * All tables must be byte-packed to match the ACPI specification, since |
| * the tables are provided by the system BIOS. |
| */ |
| #pragma pack(1) |
| |
| /* |
| * Note about bitfields: The u8 type is used for bitfields in ACPI tables. |
| * This is the only type that is even remotely portable. Anything else is not |
| * portable, so do not use any other bitfield types. |
| */ |
| |
| /* Common Sub-table header (used in MADT, SRAT, etc.) */ |
| |
| struct acpi_subtable_header { |
| u8 type; |
| u8 length; |
| }; |
| |
| /******************************************************************************* |
| * |
| * ASF - Alert Standard Format table (Signature "ASF!") |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_asf { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| }; |
| |
| /* ASF subtable header */ |
| |
| struct acpi_asf_header { |
| u8 type; |
| u8 reserved; |
| u16 length; |
| }; |
| |
| /* Values for Type field above */ |
| |
| enum acpi_asf_type { |
| ACPI_ASF_TYPE_INFO = 0, |
| ACPI_ASF_TYPE_ALERT = 1, |
| ACPI_ASF_TYPE_CONTROL = 2, |
| ACPI_ASF_TYPE_BOOT = 3, |
| ACPI_ASF_TYPE_ADDRESS = 4, |
| ACPI_ASF_TYPE_RESERVED = 5 |
| }; |
| |
| /* |
| * ASF subtables |
| */ |
| |
| /* 0: ASF Information */ |
| |
| struct acpi_asf_info { |
| struct acpi_asf_header header; |
| u8 min_reset_value; |
| u8 min_poll_interval; |
| u16 system_id; |
| u32 mfg_id; |
| u8 flags; |
| u8 reserved2[3]; |
| }; |
| |
| /* 1: ASF Alerts */ |
| |
| struct acpi_asf_alert { |
| struct acpi_asf_header header; |
| u8 assert_mask; |
| u8 deassert_mask; |
| u8 alerts; |
| u8 data_length; |
| u8 array[1]; |
| }; |
| |
| /* 2: ASF Remote Control */ |
| |
| struct acpi_asf_remote { |
| struct acpi_asf_header header; |
| u8 controls; |
| u8 data_length; |
| u16 reserved2; |
| u8 array[1]; |
| }; |
| |
| /* 3: ASF RMCP Boot Options */ |
| |
| struct acpi_asf_rmcp { |
| struct acpi_asf_header header; |
| u8 capabilities[7]; |
| u8 completion_code; |
| u32 enterprise_id; |
| u8 command; |
| u16 parameter; |
| u16 boot_options; |
| u16 oem_parameters; |
| }; |
| |
| /* 4: ASF Address */ |
| |
| struct acpi_asf_address { |
| struct acpi_asf_header header; |
| u8 eprom_address; |
| u8 devices; |
| u8 smbus_addresses[1]; |
| }; |
| |
| /******************************************************************************* |
| * |
| * BOOT - Simple Boot Flag Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_boot { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 cmos_index; /* Index in CMOS RAM for the boot register */ |
| u8 reserved[3]; |
| }; |
| |
| /******************************************************************************* |
| * |
| * CPEP - Corrected Platform Error Polling table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_cpep { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u64 reserved; |
| }; |
| |
| /* Subtable */ |
| |
| struct acpi_cpep_polling { |
| u8 type; |
| u8 length; |
| u8 id; /* Processor ID */ |
| u8 eid; /* Processor EID */ |
| u32 interval; /* Polling interval (msec) */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * DBGP - Debug Port table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_dbgp { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 type; /* 0=full 16550, 1=subset of 16550 */ |
| u8 reserved[3]; |
| struct acpi_generic_address debug_port; |
| }; |
| |
| /******************************************************************************* |
| * |
| * ECDT - Embedded Controller Boot Resources Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_ecdt { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| struct acpi_generic_address control; /* Address of EC command/status register */ |
| struct acpi_generic_address data; /* Address of EC data register */ |
| u32 uid; /* Unique ID - must be same as the EC _UID method */ |
| u8 gpe; /* The GPE for the EC */ |
| u8 id[1]; /* Full namepath of the EC in the ACPI namespace */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * HPET - High Precision Event Timer table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_hpet { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 id; /* Hardware ID of event timer block */ |
| struct acpi_generic_address address; /* Address of event timer block */ |
| u8 sequence; /* HPET sequence number */ |
| u16 minimum_tick; /* Main counter min tick, periodic mode */ |
| u8 flags; |
| }; |
| |
| /*! Flags */ |
| |
| #define ACPI_HPET_PAGE_PROTECT (1) /* 00: No page protection */ |
| #define ACPI_HPET_PAGE_PROTECT_4 (1<<1) /* 01: 4KB page protected */ |
| #define ACPI_HPET_PAGE_PROTECT_64 (1<<2) /* 02: 64KB page protected */ |
| |
| /*! [End] no source code translation !*/ |
| |
| /******************************************************************************* |
| * |
| * MADT - Multiple APIC Description Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_madt { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 address; /* Physical address of local APIC */ |
| u32 flags; |
| }; |
| |
| /* Flags */ |
| |
| #define ACPI_MADT_PCAT_COMPAT (1) /* 00: System also has dual 8259s */ |
| |
| /* Values for PCATCompat flag */ |
| |
| #define ACPI_MADT_DUAL_PIC 0 |
| #define ACPI_MADT_MULTIPLE_APIC 1 |
| |
| /* Values for subtable type in struct acpi_subtable_header */ |
| |
| enum acpi_madt_type { |
| ACPI_MADT_TYPE_LOCAL_APIC = 0, |
| ACPI_MADT_TYPE_IO_APIC = 1, |
| ACPI_MADT_TYPE_INTERRUPT_OVERRIDE = 2, |
| ACPI_MADT_TYPE_NMI_SOURCE = 3, |
| ACPI_MADT_TYPE_LOCAL_APIC_NMI = 4, |
| ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE = 5, |
| ACPI_MADT_TYPE_IO_SAPIC = 6, |
| ACPI_MADT_TYPE_LOCAL_SAPIC = 7, |
| ACPI_MADT_TYPE_INTERRUPT_SOURCE = 8, |
| ACPI_MADT_TYPE_RESERVED = 9 /* 9 and greater are reserved */ |
| }; |
| |
| /* |
| * MADT Sub-tables, correspond to Type in struct acpi_subtable_header |
| */ |
| |
| /* 0: Processor Local APIC */ |
| |
| struct acpi_madt_local_apic { |
| struct acpi_subtable_header header; |
| u8 processor_id; /* ACPI processor id */ |
| u8 id; /* Processor's local APIC id */ |
| u32 lapic_flags; |
| }; |
| |
| /* 1: IO APIC */ |
| |
| struct acpi_madt_io_apic { |
| struct acpi_subtable_header header; |
| u8 id; /* I/O APIC ID */ |
| u8 reserved; /* Reserved - must be zero */ |
| u32 address; /* APIC physical address */ |
| u32 global_irq_base; /* Global system interrupt where INTI lines start */ |
| }; |
| |
| /* 2: Interrupt Override */ |
| |
| struct acpi_madt_interrupt_override { |
| struct acpi_subtable_header header; |
| u8 bus; /* 0 - ISA */ |
| u8 source_irq; /* Interrupt source (IRQ) */ |
| u32 global_irq; /* Global system interrupt */ |
| u16 inti_flags; |
| }; |
| |
| /* 3: NMI Source */ |
| |
| struct acpi_madt_nmi_source { |
| struct acpi_subtable_header header; |
| u16 inti_flags; |
| u32 global_irq; /* Global system interrupt */ |
| }; |
| |
| /* 4: Local APIC NMI */ |
| |
| struct acpi_madt_local_apic_nmi { |
| struct acpi_subtable_header header; |
| u8 processor_id; /* ACPI processor id */ |
| u16 inti_flags; |
| u8 lint; /* LINTn to which NMI is connected */ |
| }; |
| |
| /* 5: Address Override */ |
| |
| struct acpi_madt_local_apic_override { |
| struct acpi_subtable_header header; |
| u16 reserved; /* Reserved, must be zero */ |
| u64 address; /* APIC physical address */ |
| }; |
| |
| /* 6: I/O Sapic */ |
| |
| struct acpi_madt_io_sapic { |
| struct acpi_subtable_header header; |
| u8 id; /* I/O SAPIC ID */ |
| u8 reserved; /* Reserved, must be zero */ |
| u32 global_irq_base; /* Global interrupt for SAPIC start */ |
| u64 address; /* SAPIC physical address */ |
| }; |
| |
| /* 7: Local Sapic */ |
| |
| struct acpi_madt_local_sapic { |
| struct acpi_subtable_header header; |
| u8 processor_id; /* ACPI processor id */ |
| u8 id; /* SAPIC ID */ |
| u8 eid; /* SAPIC EID */ |
| u8 reserved[3]; /* Reserved, must be zero */ |
| u32 lapic_flags; |
| u32 uid; /* Numeric UID - ACPI 3.0 */ |
| char uid_string[1]; /* String UID - ACPI 3.0 */ |
| }; |
| |
| /* 8: Platform Interrupt Source */ |
| |
| struct acpi_madt_interrupt_source { |
| struct acpi_subtable_header header; |
| u16 inti_flags; |
| u8 type; /* 1=PMI, 2=INIT, 3=corrected */ |
| u8 id; /* Processor ID */ |
| u8 eid; /* Processor EID */ |
| u8 io_sapic_vector; /* Vector value for PMI interrupts */ |
| u32 global_irq; /* Global system interrupt */ |
| u32 flags; /* Interrupt Source Flags */ |
| }; |
| |
| /* Flags field above */ |
| |
| #define ACPI_MADT_CPEI_OVERRIDE (1) |
| |
| /* |
| * Common flags fields for MADT subtables |
| */ |
| |
| /* MADT Local APIC flags (lapic_flags) */ |
| |
| #define ACPI_MADT_ENABLED (1) /* 00: Processor is usable if set */ |
| |
| /* MADT MPS INTI flags (inti_flags) */ |
| |
| #define ACPI_MADT_POLARITY_MASK (3) /* 00-01: Polarity of APIC I/O input signals */ |
| #define ACPI_MADT_TRIGGER_MASK (3<<2) /* 02-03: Trigger mode of APIC input signals */ |
| |
| /* Values for MPS INTI flags */ |
| |
| #define ACPI_MADT_POLARITY_CONFORMS 0 |
| #define ACPI_MADT_POLARITY_ACTIVE_HIGH 1 |
| #define ACPI_MADT_POLARITY_RESERVED 2 |
| #define ACPI_MADT_POLARITY_ACTIVE_LOW 3 |
| |
| #define ACPI_MADT_TRIGGER_CONFORMS (0) |
| #define ACPI_MADT_TRIGGER_EDGE (1<<2) |
| #define ACPI_MADT_TRIGGER_RESERVED (2<<2) |
| #define ACPI_MADT_TRIGGER_LEVEL (3<<2) |
| |
| /******************************************************************************* |
| * |
| * MCFG - PCI Memory Mapped Configuration table and sub-table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_mcfg { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 reserved[8]; |
| }; |
| |
| /* Subtable */ |
| |
| struct acpi_mcfg_allocation { |
| u64 address; /* Base address, processor-relative */ |
| u16 pci_segment; /* PCI segment group number */ |
| u8 start_bus_number; /* Starting PCI Bus number */ |
| u8 end_bus_number; /* Final PCI Bus number */ |
| u32 reserved; |
| }; |
| |
| /******************************************************************************* |
| * |
| * SBST - Smart Battery Specification Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_sbst { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 warning_level; |
| u32 low_level; |
| u32 critical_level; |
| }; |
| |
| /******************************************************************************* |
| * |
| * SLIT - System Locality Distance Information Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_slit { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u64 locality_count; |
| u8 entry[1]; /* Real size = localities^2 */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * SPCR - Serial Port Console Redirection table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_spcr { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 interface_type; /* 0=full 16550, 1=subset of 16550 */ |
| u8 reserved[3]; |
| struct acpi_generic_address serial_port; |
| u8 interrupt_type; |
| u8 pc_interrupt; |
| u32 interrupt; |
| u8 baud_rate; |
| u8 parity; |
| u8 stop_bits; |
| u8 flow_control; |
| u8 terminal_type; |
| u8 reserved1; |
| u16 pci_device_id; |
| u16 pci_vendor_id; |
| u8 pci_bus; |
| u8 pci_device; |
| u8 pci_function; |
| u32 pci_flags; |
| u8 pci_segment; |
| u32 reserved2; |
| }; |
| |
| /******************************************************************************* |
| * |
| * SPMI - Server Platform Management Interface table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_spmi { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u8 reserved; |
| u8 interface_type; |
| u16 spec_revision; /* Version of IPMI */ |
| u8 interrupt_type; |
| u8 gpe_number; /* GPE assigned */ |
| u8 reserved1; |
| u8 pci_device_flag; |
| u32 interrupt; |
| struct acpi_generic_address ipmi_register; |
| u8 pci_segment; |
| u8 pci_bus; |
| u8 pci_device; |
| u8 pci_function; |
| }; |
| |
| /******************************************************************************* |
| * |
| * SRAT - System Resource Affinity Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_srat { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 table_revision; /* Must be value '1' */ |
| u64 reserved; /* Reserved, must be zero */ |
| }; |
| |
| /* Values for subtable type in struct acpi_subtable_header */ |
| |
| enum acpi_srat_type { |
| ACPI_SRAT_TYPE_CPU_AFFINITY = 0, |
| ACPI_SRAT_TYPE_MEMORY_AFFINITY = 1, |
| ACPI_SRAT_TYPE_RESERVED = 2 |
| }; |
| |
| /* SRAT sub-tables */ |
| |
| struct acpi_srat_cpu_affinity { |
| struct acpi_subtable_header header; |
| u8 proximity_domain_lo; |
| u8 apic_id; |
| u32 flags; |
| u8 local_sapic_eid; |
| u8 proximity_domain_hi[3]; |
| u32 reserved; /* Reserved, must be zero */ |
| }; |
| |
| /* Flags */ |
| |
| #define ACPI_SRAT_CPU_ENABLED (1) /* 00: Use affinity structure */ |
| |
| struct acpi_srat_mem_affinity { |
| struct acpi_subtable_header header; |
| u32 proximity_domain; |
| u16 reserved; /* Reserved, must be zero */ |
| u64 base_address; |
| u64 length; |
| u32 memory_type; /* See acpi_address_range_id */ |
| u32 flags; |
| u64 reserved1; /* Reserved, must be zero */ |
| }; |
| |
| /* Flags */ |
| |
| #define ACPI_SRAT_MEM_ENABLED (1) /* 00: Use affinity structure */ |
| #define ACPI_SRAT_MEM_HOT_PLUGGABLE (1<<1) /* 01: Memory region is hot pluggable */ |
| #define ACPI_SRAT_MEM_NON_VOLATILE (1<<2) /* 02: Memory region is non-volatile */ |
| |
| /* Memory types */ |
| |
| enum acpi_address_range_id { |
| ACPI_ADDRESS_RANGE_MEMORY = 1, |
| ACPI_ADDRESS_RANGE_RESERVED = 2, |
| ACPI_ADDRESS_RANGE_ACPI = 3, |
| ACPI_ADDRESS_RANGE_NVS = 4, |
| ACPI_ADDRESS_RANGE_COUNT = 5 |
| }; |
| |
| /******************************************************************************* |
| * |
| * TCPA - Trusted Computing Platform Alliance table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_tcpa { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u16 reserved; |
| u32 max_log_length; /* Maximum length for the event log area */ |
| u64 log_address; /* Address of the event log area */ |
| }; |
| |
| /******************************************************************************* |
| * |
| * WDRT - Watchdog Resource Table |
| * |
| ******************************************************************************/ |
| |
| struct acpi_table_wdrt { |
| struct acpi_table_header header; /* Common ACPI table header */ |
| u32 header_length; /* Watchdog Header Length */ |
| u8 pci_segment; /* PCI Segment number */ |
| u8 pci_bus; /* PCI Bus number */ |
| u8 pci_device; /* PCI Device number */ |
| u8 pci_function; /* PCI Function number */ |
| u32 timer_period; /* Period of one timer count (msec) */ |
| u32 max_count; /* Maximum counter value supported */ |
| u32 min_count; /* Minimum counter value */ |
| u8 flags; |
| u8 reserved[3]; |
| u32 entries; /* Number of watchdog entries that follow */ |
| }; |
| |
| /* Flags */ |
| |
| #define ACPI_WDRT_TIMER_ENABLED (1) /* 00: Timer enabled */ |
| |
| /* Reset to default packing */ |
| |
| #pragma pack() |
| |
| #endif /* __ACTBL1_H__ */ |