| /* ptrace.c */ |
| /* By Ross Biro 1/23/92 */ |
| /* edited by Linus Torvalds */ |
| /* mangled further by Bob Manson (manson@santafe.edu) */ |
| /* more mutilation by David Mosberger (davidm@azstarnet.com) */ |
| |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/mm.h> |
| #include <linux/smp.h> |
| #include <linux/smp_lock.h> |
| #include <linux/errno.h> |
| #include <linux/ptrace.h> |
| #include <linux/user.h> |
| #include <linux/slab.h> |
| #include <linux/security.h> |
| #include <linux/signal.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/pgtable.h> |
| #include <asm/system.h> |
| #include <asm/fpu.h> |
| |
| #include "proto.h" |
| |
| #define DEBUG DBG_MEM |
| #undef DEBUG |
| |
| #ifdef DEBUG |
| enum { |
| DBG_MEM = (1<<0), |
| DBG_BPT = (1<<1), |
| DBG_MEM_ALL = (1<<2) |
| }; |
| #define DBG(fac,args) {if ((fac) & DEBUG) printk args;} |
| #else |
| #define DBG(fac,args) |
| #endif |
| |
| #define BREAKINST 0x00000080 /* call_pal bpt */ |
| |
| /* |
| * does not yet catch signals sent when the child dies. |
| * in exit.c or in signal.c. |
| */ |
| |
| /* |
| * Processes always block with the following stack-layout: |
| * |
| * +================================+ <---- task + 2*PAGE_SIZE |
| * | PALcode saved frame (ps, pc, | ^ |
| * | gp, a0, a1, a2) | | |
| * +================================+ | struct pt_regs |
| * | | | |
| * | frame generated by SAVE_ALL | | |
| * | | v |
| * +================================+ |
| * | | ^ |
| * | frame saved by do_switch_stack | | struct switch_stack |
| * | | v |
| * +================================+ |
| */ |
| |
| /* |
| * The following table maps a register index into the stack offset at |
| * which the register is saved. Register indices are 0-31 for integer |
| * regs, 32-63 for fp regs, and 64 for the pc. Notice that sp and |
| * zero have no stack-slot and need to be treated specially (see |
| * get_reg/put_reg below). |
| */ |
| enum { |
| REG_R0 = 0, REG_F0 = 32, REG_FPCR = 63, REG_PC = 64 |
| }; |
| |
| #define PT_REG(reg) \ |
| (PAGE_SIZE*2 - sizeof(struct pt_regs) + offsetof(struct pt_regs, reg)) |
| |
| #define SW_REG(reg) \ |
| (PAGE_SIZE*2 - sizeof(struct pt_regs) - sizeof(struct switch_stack) \ |
| + offsetof(struct switch_stack, reg)) |
| |
| static int regoff[] = { |
| PT_REG( r0), PT_REG( r1), PT_REG( r2), PT_REG( r3), |
| PT_REG( r4), PT_REG( r5), PT_REG( r6), PT_REG( r7), |
| PT_REG( r8), SW_REG( r9), SW_REG( r10), SW_REG( r11), |
| SW_REG( r12), SW_REG( r13), SW_REG( r14), SW_REG( r15), |
| PT_REG( r16), PT_REG( r17), PT_REG( r18), PT_REG( r19), |
| PT_REG( r20), PT_REG( r21), PT_REG( r22), PT_REG( r23), |
| PT_REG( r24), PT_REG( r25), PT_REG( r26), PT_REG( r27), |
| PT_REG( r28), PT_REG( gp), -1, -1, |
| SW_REG(fp[ 0]), SW_REG(fp[ 1]), SW_REG(fp[ 2]), SW_REG(fp[ 3]), |
| SW_REG(fp[ 4]), SW_REG(fp[ 5]), SW_REG(fp[ 6]), SW_REG(fp[ 7]), |
| SW_REG(fp[ 8]), SW_REG(fp[ 9]), SW_REG(fp[10]), SW_REG(fp[11]), |
| SW_REG(fp[12]), SW_REG(fp[13]), SW_REG(fp[14]), SW_REG(fp[15]), |
| SW_REG(fp[16]), SW_REG(fp[17]), SW_REG(fp[18]), SW_REG(fp[19]), |
| SW_REG(fp[20]), SW_REG(fp[21]), SW_REG(fp[22]), SW_REG(fp[23]), |
| SW_REG(fp[24]), SW_REG(fp[25]), SW_REG(fp[26]), SW_REG(fp[27]), |
| SW_REG(fp[28]), SW_REG(fp[29]), SW_REG(fp[30]), SW_REG(fp[31]), |
| PT_REG( pc) |
| }; |
| |
| static unsigned long zero; |
| |
| /* |
| * Get address of register REGNO in task TASK. |
| */ |
| static unsigned long * |
| get_reg_addr(struct task_struct * task, unsigned long regno) |
| { |
| unsigned long *addr; |
| |
| if (regno == 30) { |
| addr = &task_thread_info(task)->pcb.usp; |
| } else if (regno == 65) { |
| addr = &task_thread_info(task)->pcb.unique; |
| } else if (regno == 31 || regno > 65) { |
| zero = 0; |
| addr = &zero; |
| } else { |
| addr = task_stack_page(task) + regoff[regno]; |
| } |
| return addr; |
| } |
| |
| /* |
| * Get contents of register REGNO in task TASK. |
| */ |
| static unsigned long |
| get_reg(struct task_struct * task, unsigned long regno) |
| { |
| /* Special hack for fpcr -- combine hardware and software bits. */ |
| if (regno == 63) { |
| unsigned long fpcr = *get_reg_addr(task, regno); |
| unsigned long swcr |
| = task_thread_info(task)->ieee_state & IEEE_SW_MASK; |
| swcr = swcr_update_status(swcr, fpcr); |
| return fpcr | swcr; |
| } |
| return *get_reg_addr(task, regno); |
| } |
| |
| /* |
| * Write contents of register REGNO in task TASK. |
| */ |
| static int |
| put_reg(struct task_struct *task, unsigned long regno, unsigned long data) |
| { |
| if (regno == 63) { |
| task_thread_info(task)->ieee_state |
| = ((task_thread_info(task)->ieee_state & ~IEEE_SW_MASK) |
| | (data & IEEE_SW_MASK)); |
| data = (data & FPCR_DYN_MASK) | ieee_swcr_to_fpcr(data); |
| } |
| *get_reg_addr(task, regno) = data; |
| return 0; |
| } |
| |
| static inline int |
| read_int(struct task_struct *task, unsigned long addr, int * data) |
| { |
| int copied = access_process_vm(task, addr, data, sizeof(int), 0); |
| return (copied == sizeof(int)) ? 0 : -EIO; |
| } |
| |
| static inline int |
| write_int(struct task_struct *task, unsigned long addr, int data) |
| { |
| int copied = access_process_vm(task, addr, &data, sizeof(int), 1); |
| return (copied == sizeof(int)) ? 0 : -EIO; |
| } |
| |
| /* |
| * Set breakpoint. |
| */ |
| int |
| ptrace_set_bpt(struct task_struct * child) |
| { |
| int displ, i, res, reg_b, nsaved = 0; |
| unsigned int insn, op_code; |
| unsigned long pc; |
| |
| pc = get_reg(child, REG_PC); |
| res = read_int(child, pc, (int *) &insn); |
| if (res < 0) |
| return res; |
| |
| op_code = insn >> 26; |
| if (op_code >= 0x30) { |
| /* |
| * It's a branch: instead of trying to figure out |
| * whether the branch will be taken or not, we'll put |
| * a breakpoint at either location. This is simpler, |
| * more reliable, and probably not a whole lot slower |
| * than the alternative approach of emulating the |
| * branch (emulation can be tricky for fp branches). |
| */ |
| displ = ((s32)(insn << 11)) >> 9; |
| task_thread_info(child)->bpt_addr[nsaved++] = pc + 4; |
| if (displ) /* guard against unoptimized code */ |
| task_thread_info(child)->bpt_addr[nsaved++] |
| = pc + 4 + displ; |
| DBG(DBG_BPT, ("execing branch\n")); |
| } else if (op_code == 0x1a) { |
| reg_b = (insn >> 16) & 0x1f; |
| task_thread_info(child)->bpt_addr[nsaved++] = get_reg(child, reg_b); |
| DBG(DBG_BPT, ("execing jump\n")); |
| } else { |
| task_thread_info(child)->bpt_addr[nsaved++] = pc + 4; |
| DBG(DBG_BPT, ("execing normal insn\n")); |
| } |
| |
| /* install breakpoints: */ |
| for (i = 0; i < nsaved; ++i) { |
| res = read_int(child, task_thread_info(child)->bpt_addr[i], |
| (int *) &insn); |
| if (res < 0) |
| return res; |
| task_thread_info(child)->bpt_insn[i] = insn; |
| DBG(DBG_BPT, (" -> next_pc=%lx\n", |
| task_thread_info(child)->bpt_addr[i])); |
| res = write_int(child, task_thread_info(child)->bpt_addr[i], |
| BREAKINST); |
| if (res < 0) |
| return res; |
| } |
| task_thread_info(child)->bpt_nsaved = nsaved; |
| return 0; |
| } |
| |
| /* |
| * Ensure no single-step breakpoint is pending. Returns non-zero |
| * value if child was being single-stepped. |
| */ |
| int |
| ptrace_cancel_bpt(struct task_struct * child) |
| { |
| int i, nsaved = task_thread_info(child)->bpt_nsaved; |
| |
| task_thread_info(child)->bpt_nsaved = 0; |
| |
| if (nsaved > 2) { |
| printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved); |
| nsaved = 2; |
| } |
| |
| for (i = 0; i < nsaved; ++i) { |
| write_int(child, task_thread_info(child)->bpt_addr[i], |
| task_thread_info(child)->bpt_insn[i]); |
| } |
| return (nsaved != 0); |
| } |
| |
| /* |
| * Called by kernel/ptrace.c when detaching.. |
| * |
| * Make sure the single step bit is not set. |
| */ |
| void ptrace_disable(struct task_struct *child) |
| { |
| ptrace_cancel_bpt(child); |
| } |
| |
| asmlinkage long |
| do_sys_ptrace(long request, long pid, long addr, long data, |
| struct pt_regs *regs) |
| { |
| struct task_struct *child; |
| unsigned long tmp; |
| size_t copied; |
| long ret; |
| |
| lock_kernel(); |
| DBG(DBG_MEM, ("request=%ld pid=%ld addr=0x%lx data=0x%lx\n", |
| request, pid, addr, data)); |
| if (request == PTRACE_TRACEME) { |
| ret = ptrace_traceme(); |
| goto out_notsk; |
| } |
| |
| child = ptrace_get_task_struct(pid); |
| if (IS_ERR(child)) { |
| ret = PTR_ERR(child); |
| goto out_notsk; |
| } |
| |
| if (request == PTRACE_ATTACH) { |
| ret = ptrace_attach(child); |
| goto out; |
| } |
| |
| ret = ptrace_check_attach(child, request == PTRACE_KILL); |
| if (ret < 0) |
| goto out; |
| |
| switch (request) { |
| /* When I and D space are separate, these will need to be fixed. */ |
| case PTRACE_PEEKTEXT: /* read word at location addr. */ |
| case PTRACE_PEEKDATA: |
| copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0); |
| ret = -EIO; |
| if (copied != sizeof(tmp)) |
| break; |
| |
| regs->r0 = 0; /* special return: no errors */ |
| ret = tmp; |
| break; |
| |
| /* Read register number ADDR. */ |
| case PTRACE_PEEKUSR: |
| regs->r0 = 0; /* special return: no errors */ |
| ret = get_reg(child, addr); |
| DBG(DBG_MEM, ("peek $%ld->%#lx\n", addr, ret)); |
| break; |
| |
| /* When I and D space are separate, this will have to be fixed. */ |
| case PTRACE_POKETEXT: /* write the word at location addr. */ |
| case PTRACE_POKEDATA: |
| ret = generic_ptrace_pokedata(child, addr, data); |
| break; |
| |
| case PTRACE_POKEUSR: /* write the specified register */ |
| DBG(DBG_MEM, ("poke $%ld<-%#lx\n", addr, data)); |
| ret = put_reg(child, addr, data); |
| break; |
| |
| case PTRACE_SYSCALL: |
| /* continue and stop at next (return from) syscall */ |
| case PTRACE_CONT: /* restart after signal. */ |
| ret = -EIO; |
| if (!valid_signal(data)) |
| break; |
| if (request == PTRACE_SYSCALL) |
| set_tsk_thread_flag(child, TIF_SYSCALL_TRACE); |
| else |
| clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); |
| child->exit_code = data; |
| /* make sure single-step breakpoint is gone. */ |
| ptrace_cancel_bpt(child); |
| wake_up_process(child); |
| ret = 0; |
| break; |
| |
| /* |
| * Make the child exit. Best I can do is send it a sigkill. |
| * perhaps it should be put in the status that it wants to |
| * exit. |
| */ |
| case PTRACE_KILL: |
| ret = 0; |
| if (child->exit_state == EXIT_ZOMBIE) |
| break; |
| child->exit_code = SIGKILL; |
| /* make sure single-step breakpoint is gone. */ |
| ptrace_cancel_bpt(child); |
| wake_up_process(child); |
| goto out; |
| |
| case PTRACE_SINGLESTEP: /* execute single instruction. */ |
| ret = -EIO; |
| if (!valid_signal(data)) |
| break; |
| /* Mark single stepping. */ |
| task_thread_info(child)->bpt_nsaved = -1; |
| clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE); |
| child->exit_code = data; |
| wake_up_process(child); |
| /* give it a chance to run. */ |
| ret = 0; |
| goto out; |
| |
| case PTRACE_DETACH: /* detach a process that was attached. */ |
| ret = ptrace_detach(child, data); |
| goto out; |
| |
| default: |
| ret = ptrace_request(child, request, addr, data); |
| goto out; |
| } |
| out: |
| put_task_struct(child); |
| out_notsk: |
| unlock_kernel(); |
| return ret; |
| } |
| |
| asmlinkage void |
| syscall_trace(void) |
| { |
| if (!test_thread_flag(TIF_SYSCALL_TRACE)) |
| return; |
| if (!(current->ptrace & PT_PTRACED)) |
| return; |
| /* The 0x80 provides a way for the tracing parent to distinguish |
| between a syscall stop and SIGTRAP delivery */ |
| ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) |
| ? 0x80 : 0)); |
| |
| /* |
| * This isn't the same as continuing with a signal, but it will do |
| * for normal use. strace only continues with a signal if the |
| * stopping signal is not SIGTRAP. -brl |
| */ |
| if (current->exit_code) { |
| send_sig(current->exit_code, current, 1); |
| current->exit_code = 0; |
| } |
| } |