blob: 967101ec15fdf268cc8d2a73493be36df718d687 [file] [log] [blame]
/* linux/drivers/usb/phy/samsung-usbphy.c
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Author: Praveen Paneri <p.paneri@samsung.com>
*
* Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and
* OHCI-EXYNOS controllers.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/usb/otg.h>
#include <linux/usb/samsung_usb_phy.h>
#include <linux/platform_data/samsung-usbphy.h>
/* Register definitions */
#define SAMSUNG_PHYPWR (0x00)
#define PHYPWR_NORMAL_MASK (0x19 << 0)
#define PHYPWR_OTG_DISABLE (0x1 << 4)
#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3)
#define PHYPWR_FORCE_SUSPEND (0x1 << 1)
/* For Exynos4 */
#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
#define PHYPWR_SLEEP_PHY0 (0x1 << 5)
#define SAMSUNG_PHYCLK (0x04)
#define PHYCLK_MODE_USB11 (0x1 << 6)
#define PHYCLK_EXT_OSC (0x1 << 5)
#define PHYCLK_COMMON_ON_N (0x1 << 4)
#define PHYCLK_ID_PULL (0x1 << 2)
#define PHYCLK_CLKSEL_MASK (0x3 << 0)
#define PHYCLK_CLKSEL_48M (0x0 << 0)
#define PHYCLK_CLKSEL_12M (0x2 << 0)
#define PHYCLK_CLKSEL_24M (0x3 << 0)
#define SAMSUNG_RSTCON (0x08)
#define RSTCON_PHYLINK_SWRST (0x1 << 2)
#define RSTCON_HLINK_SWRST (0x1 << 1)
#define RSTCON_SWRST (0x1 << 0)
/* EXYNOS5 */
#define EXYNOS5_PHY_HOST_CTRL0 (0x00)
#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31)
#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19)
#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19)
#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19)
#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19)
#define HOST_CTRL0_FSEL_MASK (0x7 << 16)
#define HOST_CTRL0_FSEL(_x) ((_x) << 16)
#define FSEL_CLKSEL_50M (0x7)
#define FSEL_CLKSEL_24M (0x5)
#define FSEL_CLKSEL_20M (0x4)
#define FSEL_CLKSEL_19200K (0x3)
#define FSEL_CLKSEL_12M (0x2)
#define FSEL_CLKSEL_10M (0x1)
#define FSEL_CLKSEL_9600K (0x0)
#define HOST_CTRL0_TESTBURNIN (0x1 << 11)
#define HOST_CTRL0_RETENABLE (0x1 << 10)
#define HOST_CTRL0_COMMONON_N (0x1 << 9)
#define HOST_CTRL0_SIDDQ (0x1 << 6)
#define HOST_CTRL0_FORCESLEEP (0x1 << 5)
#define HOST_CTRL0_FORCESUSPEND (0x1 << 4)
#define HOST_CTRL0_WORDINTERFACE (0x1 << 3)
#define HOST_CTRL0_UTMISWRST (0x1 << 2)
#define HOST_CTRL0_LINKSWRST (0x1 << 1)
#define HOST_CTRL0_PHYSWRST (0x1 << 0)
#define EXYNOS5_PHY_HOST_TUNE0 (0x04)
#define EXYNOS5_PHY_HSIC_CTRL1 (0x10)
#define EXYNOS5_PHY_HSIC_TUNE1 (0x14)
#define EXYNOS5_PHY_HSIC_CTRL2 (0x20)
#define EXYNOS5_PHY_HSIC_TUNE2 (0x24)
#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23)
#define HSIC_CTRL_REFCLKSEL (0x2 << 23)
#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16)
#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16)
#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16)
#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16)
#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16)
#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16)
#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16)
#define HSIC_CTRL_SIDDQ (0x1 << 6)
#define HSIC_CTRL_FORCESLEEP (0x1 << 5)
#define HSIC_CTRL_FORCESUSPEND (0x1 << 4)
#define HSIC_CTRL_WORDINTERFACE (0x1 << 3)
#define HSIC_CTRL_UTMISWRST (0x1 << 2)
#define HSIC_CTRL_PHYSWRST (0x1 << 0)
#define EXYNOS5_PHY_HOST_EHCICTRL (0x30)
#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29)
#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28)
#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27)
#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26)
#define EXYNOS5_PHY_HOST_OHCICTRL (0x34)
#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3)
#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2)
#define HOST_OHCICTRL_CNTSEL (0x1 << 1)
#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0)
#define EXYNOS5_PHY_OTG_SYS (0x38)
#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14)
#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13)
#define OTG_SYS_PHY0_SWRST (0x1 << 12)
#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9)
#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9)
#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9)
#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9)
#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8)
#define OTG_SYS_COMMON_ON (0x1 << 7)
#define OTG_SYS_FSEL_MASK (0x7 << 4)
#define OTG_SYS_FSEL(_x) ((_x) << 4)
#define OTG_SYS_FORCESLEEP (0x1 << 3)
#define OTG_SYS_OTGDISABLE (0x1 << 2)
#define OTG_SYS_SIDDQ_UOTG (0x1 << 1)
#define OTG_SYS_FORCESUSPEND (0x1 << 0)
#define EXYNOS5_PHY_OTG_TUNE (0x40)
#ifndef MHZ
#define MHZ (1000*1000)
#endif
#ifndef KHZ
#define KHZ (1000)
#endif
#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4)
#define S3C64XX_USBPHY_ENABLE (0x1 << 16)
#define EXYNOS_USBPHY_ENABLE (0x1 << 0)
#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0)
enum samsung_cpu_type {
TYPE_S3C64XX,
TYPE_EXYNOS4210,
TYPE_EXYNOS5250,
};
/*
* struct samsung_usbphy_drvdata - driver data for various SoC variants
* @cpu_type: machine identifier
* @devphy_en_mask: device phy enable mask for PHY CONTROL register
* @hostphy_en_mask: host phy enable mask for PHY CONTROL register
* @devphy_reg_offset: offset to DEVICE PHY CONTROL register from
* mapped address of system controller.
* @hostphy_reg_offset: offset to HOST PHY CONTROL register from
* mapped address of system controller.
*
* Here we have a separate mask for device type phy.
* Having different masks for host and device type phy helps
* in setting independent masks in case of SoCs like S5PV210,
* in which PHY0 and PHY1 enable bits belong to same register
* placed at position 0 and 1 respectively.
* Although for newer SoCs like exynos these bits belong to
* different registers altogether placed at position 0.
*/
struct samsung_usbphy_drvdata {
int cpu_type;
int devphy_en_mask;
int hostphy_en_mask;
u32 devphy_reg_offset;
u32 hostphy_reg_offset;
};
/*
* struct samsung_usbphy - transceiver driver state
* @phy: transceiver structure
* @plat: platform data
* @dev: The parent device supplied to the probe function
* @clk: usb phy clock
* @regs: usb phy controller registers memory base
* @pmuregs: USB device PHY_CONTROL register memory base
* @sysreg: USB2.0 PHY_CFG register memory base
* @ref_clk_freq: reference clock frequency selection
* @drv_data: driver data available for different SoCs
* @phy_type: Samsung SoCs specific phy types: #HOST
* #DEVICE
* @phy_usage: usage count for phy
* @lock: lock for phy operations
*/
struct samsung_usbphy {
struct usb_phy phy;
struct samsung_usbphy_data *plat;
struct device *dev;
struct clk *clk;
void __iomem *regs;
void __iomem *pmuregs;
void __iomem *sysreg;
int ref_clk_freq;
const struct samsung_usbphy_drvdata *drv_data;
enum samsung_usb_phy_type phy_type;
atomic_t phy_usage;
spinlock_t lock;
};
#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host)
{
if (!otg)
return -ENODEV;
if (!otg->host)
otg->host = host;
return 0;
}
static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy)
{
struct device_node *usbphy_sys;
/* Getting node for system controller interface for usb-phy */
usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys");
if (!usbphy_sys) {
dev_err(sphy->dev, "No sys-controller interface for usb-phy\n");
return -ENODEV;
}
sphy->pmuregs = of_iomap(usbphy_sys, 0);
if (sphy->pmuregs == NULL) {
dev_err(sphy->dev, "Can't get usb-phy pmu control register\n");
goto err0;
}
sphy->sysreg = of_iomap(usbphy_sys, 1);
/*
* Not returning error code here, since this situation is not fatal.
* Few SoCs may not have this switch available
*/
if (sphy->sysreg == NULL)
dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n");
of_node_put(usbphy_sys);
return 0;
err0:
of_node_put(usbphy_sys);
return -ENXIO;
}
/*
* Set isolation here for phy.
* Here 'on = true' would mean USB PHY block is isolated, hence
* de-activated and vice-versa.
*/
static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on)
{
void __iomem *reg = NULL;
u32 reg_val;
u32 en_mask = 0;
if (!sphy->pmuregs) {
dev_warn(sphy->dev, "Can't set pmu isolation\n");
return;
}
switch (sphy->drv_data->cpu_type) {
case TYPE_S3C64XX:
/*
* Do nothing: We will add here once S3C64xx goes for DT support
*/
break;
case TYPE_EXYNOS4210:
/*
* Fall through since exynos4210 and exynos5250 have similar
* register architecture: two separate registers for host and
* device phy control with enable bit at position 0.
*/
case TYPE_EXYNOS5250:
if (sphy->phy_type == USB_PHY_TYPE_DEVICE) {
reg = sphy->pmuregs +
sphy->drv_data->devphy_reg_offset;
en_mask = sphy->drv_data->devphy_en_mask;
} else if (sphy->phy_type == USB_PHY_TYPE_HOST) {
reg = sphy->pmuregs +
sphy->drv_data->hostphy_reg_offset;
en_mask = sphy->drv_data->hostphy_en_mask;
}
break;
default:
dev_err(sphy->dev, "Invalid SoC type\n");
return;
}
reg_val = readl(reg);
if (on)
reg_val &= ~en_mask;
else
reg_val |= en_mask;
writel(reg_val, reg);
}
/*
* Configure the mode of working of usb-phy here: HOST/DEVICE.
*/
static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy)
{
u32 reg;
if (!sphy->sysreg) {
dev_warn(sphy->dev, "Can't configure specified phy mode\n");
return;
}
reg = readl(sphy->sysreg);
if (sphy->phy_type == USB_PHY_TYPE_DEVICE)
reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK;
else if (sphy->phy_type == USB_PHY_TYPE_HOST)
reg |= EXYNOS_USB20PHY_CFG_HOST_LINK;
writel(reg, sphy->sysreg);
}
/*
* PHYs are different for USB Device and USB Host.
* This make sure that correct PHY type is selected before
* any operation on PHY.
*/
static int samsung_usbphy_set_type(struct usb_phy *phy,
enum samsung_usb_phy_type phy_type)
{
struct samsung_usbphy *sphy = phy_to_sphy(phy);
sphy->phy_type = phy_type;
return 0;
}
/*
* Returns reference clock frequency selection value
*/
static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
{
struct clk *ref_clk;
int refclk_freq = 0;
/*
* In exynos5250 USB host and device PHY use
* external crystal clock XXTI
*/
if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
ref_clk = clk_get(sphy->dev, "ext_xtal");
else
ref_clk = clk_get(sphy->dev, "xusbxti");
if (IS_ERR(ref_clk)) {
dev_err(sphy->dev, "Failed to get reference clock\n");
return PTR_ERR(ref_clk);
}
if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) {
/* set clock frequency for PLL */
switch (clk_get_rate(ref_clk)) {
case 9600 * KHZ:
refclk_freq = FSEL_CLKSEL_9600K;
break;
case 10 * MHZ:
refclk_freq = FSEL_CLKSEL_10M;
break;
case 12 * MHZ:
refclk_freq = FSEL_CLKSEL_12M;
break;
case 19200 * KHZ:
refclk_freq = FSEL_CLKSEL_19200K;
break;
case 20 * MHZ:
refclk_freq = FSEL_CLKSEL_20M;
break;
case 50 * MHZ:
refclk_freq = FSEL_CLKSEL_50M;
break;
case 24 * MHZ:
default:
/* default reference clock */
refclk_freq = FSEL_CLKSEL_24M;
break;
}
} else {
switch (clk_get_rate(ref_clk)) {
case 12 * MHZ:
refclk_freq = PHYCLK_CLKSEL_12M;
break;
case 24 * MHZ:
refclk_freq = PHYCLK_CLKSEL_24M;
break;
case 48 * MHZ:
refclk_freq = PHYCLK_CLKSEL_48M;
break;
default:
if (sphy->drv_data->cpu_type == TYPE_S3C64XX)
refclk_freq = PHYCLK_CLKSEL_48M;
else
refclk_freq = PHYCLK_CLKSEL_24M;
break;
}
}
clk_put(ref_clk);
return refclk_freq;
}
static bool exynos5_phyhost_is_on(void *regs)
{
u32 reg;
reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
return !(reg & HOST_CTRL0_SIDDQ);
}
static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
u32 phyclk = sphy->ref_clk_freq;
u32 phyhost;
u32 phyotg;
u32 phyhsic;
u32 ehcictrl;
u32 ohcictrl;
/*
* phy_usage helps in keeping usage count for phy
* so that the first consumer enabling the phy is also
* the last consumer to disable it.
*/
atomic_inc(&sphy->phy_usage);
if (exynos5_phyhost_is_on(regs)) {
dev_info(sphy->dev, "Already power on PHY\n");
return;
}
/* Host configuration */
phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
/* phy reference clock configuration */
phyhost &= ~HOST_CTRL0_FSEL_MASK;
phyhost |= HOST_CTRL0_FSEL(phyclk);
/* host phy reset */
phyhost &= ~(HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL |
HOST_CTRL0_SIDDQ |
/* Enable normal mode of operation */
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP);
/* Link reset */
phyhost |= (HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST |
/* COMMON Block configuration during suspend */
HOST_CTRL0_COMMONON_N);
writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
udelay(10);
phyhost &= ~(HOST_CTRL0_LINKSWRST |
HOST_CTRL0_UTMISWRST);
writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
/* OTG configuration */
phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
/* phy reference clock configuration */
phyotg &= ~OTG_SYS_FSEL_MASK;
phyotg |= OTG_SYS_FSEL(phyclk);
/* Enable normal mode of operation */
phyotg &= ~(OTG_SYS_FORCESUSPEND |
OTG_SYS_SIDDQ_UOTG |
OTG_SYS_FORCESLEEP |
OTG_SYS_REFCLKSEL_MASK |
/* COMMON Block configuration during suspend */
OTG_SYS_COMMON_ON);
/* OTG phy & link reset */
phyotg |= (OTG_SYS_PHY0_SWRST |
OTG_SYS_LINKSWRST_UOTG |
OTG_SYS_PHYLINK_SWRESET |
OTG_SYS_OTGDISABLE |
/* Set phy refclk */
OTG_SYS_REFCLKSEL_CLKCORE);
writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
udelay(10);
phyotg &= ~(OTG_SYS_PHY0_SWRST |
OTG_SYS_LINKSWRST_UOTG |
OTG_SYS_PHYLINK_SWRESET);
writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
/* HSIC phy configuration */
phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
HSIC_CTRL_REFCLKSEL |
HSIC_CTRL_PHYSWRST);
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
udelay(10);
phyhsic &= ~HSIC_CTRL_PHYSWRST;
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
udelay(80);
/* enable EHCI DMA burst */
ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL);
ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN |
HOST_EHCICTRL_ENAINCR4 |
HOST_EHCICTRL_ENAINCR8 |
HOST_EHCICTRL_ENAINCR16);
writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL);
/* set ohci_suspend_on_n */
ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL);
ohcictrl |= HOST_OHCICTRL_SUSPLGCY;
writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL);
}
static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
u32 phypwr;
u32 phyclk;
u32 rstcon;
/* set clock frequency for PLL */
phyclk = sphy->ref_clk_freq;
phypwr = readl(regs + SAMSUNG_PHYPWR);
rstcon = readl(regs + SAMSUNG_RSTCON);
switch (sphy->drv_data->cpu_type) {
case TYPE_S3C64XX:
phyclk &= ~PHYCLK_COMMON_ON_N;
phypwr &= ~PHYPWR_NORMAL_MASK;
rstcon |= RSTCON_SWRST;
break;
case TYPE_EXYNOS4210:
phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
rstcon |= RSTCON_SWRST;
default:
break;
}
writel(phyclk, regs + SAMSUNG_PHYCLK);
/* Configure PHY0 for normal operation*/
writel(phypwr, regs + SAMSUNG_PHYPWR);
/* reset all ports of PHY and Link */
writel(rstcon, regs + SAMSUNG_RSTCON);
udelay(10);
rstcon &= ~RSTCON_SWRST;
writel(rstcon, regs + SAMSUNG_RSTCON);
}
static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
u32 phyhost;
u32 phyotg;
u32 phyhsic;
if (atomic_dec_return(&sphy->phy_usage) > 0) {
dev_info(sphy->dev, "still being used\n");
return;
}
phyhsic = (HSIC_CTRL_REFCLKDIV_12 |
HSIC_CTRL_REFCLKSEL |
HSIC_CTRL_SIDDQ |
HSIC_CTRL_FORCESLEEP |
HSIC_CTRL_FORCESUSPEND);
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1);
writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2);
phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0);
phyhost |= (HOST_CTRL0_SIDDQ |
HOST_CTRL0_FORCESUSPEND |
HOST_CTRL0_FORCESLEEP |
HOST_CTRL0_PHYSWRST |
HOST_CTRL0_PHYSWRSTALL);
writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0);
phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS);
phyotg |= (OTG_SYS_FORCESUSPEND |
OTG_SYS_SIDDQ_UOTG |
OTG_SYS_FORCESLEEP);
writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS);
}
static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
{
void __iomem *regs = sphy->regs;
u32 phypwr;
phypwr = readl(regs + SAMSUNG_PHYPWR);
switch (sphy->drv_data->cpu_type) {
case TYPE_S3C64XX:
phypwr |= PHYPWR_NORMAL_MASK;
break;
case TYPE_EXYNOS4210:
phypwr |= PHYPWR_NORMAL_MASK_PHY0;
default:
break;
}
/* Disable analog and otg block power */
writel(phypwr, regs + SAMSUNG_PHYPWR);
}
/*
* The function passed to the usb driver for phy initialization
*/
static int samsung_usbphy_init(struct usb_phy *phy)
{
struct samsung_usbphy *sphy;
struct usb_bus *host = NULL;
unsigned long flags;
int ret = 0;
sphy = phy_to_sphy(phy);
host = phy->otg->host;
/* Enable the phy clock */
ret = clk_prepare_enable(sphy->clk);
if (ret) {
dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
return ret;
}
spin_lock_irqsave(&sphy->lock, flags);
if (host) {
/* setting default phy-type for USB 2.0 */
if (!strstr(dev_name(host->controller), "ehci") ||
!strstr(dev_name(host->controller), "ohci"))
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
} else {
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
}
/* Disable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(false);
else
samsung_usbphy_set_isolation(sphy, false);
/* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */
samsung_usbphy_cfg_sel(sphy);
/* Initialize usb phy registers */
if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
samsung_exynos5_usbphy_enable(sphy);
else
samsung_usbphy_enable(sphy);
spin_unlock_irqrestore(&sphy->lock, flags);
/* Disable the phy clock */
clk_disable_unprepare(sphy->clk);
return ret;
}
/*
* The function passed to the usb driver for phy shutdown
*/
static void samsung_usbphy_shutdown(struct usb_phy *phy)
{
struct samsung_usbphy *sphy;
struct usb_bus *host = NULL;
unsigned long flags;
sphy = phy_to_sphy(phy);
host = phy->otg->host;
if (clk_prepare_enable(sphy->clk)) {
dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
return;
}
spin_lock_irqsave(&sphy->lock, flags);
if (host) {
/* setting default phy-type for USB 2.0 */
if (!strstr(dev_name(host->controller), "ehci") ||
!strstr(dev_name(host->controller), "ohci"))
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST);
} else {
samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE);
}
/* De-initialize usb phy registers */
if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250)
samsung_exynos5_usbphy_disable(sphy);
else
samsung_usbphy_disable(sphy);
/* Enable phy isolation */
if (sphy->plat && sphy->plat->pmu_isolation)
sphy->plat->pmu_isolation(true);
else
samsung_usbphy_set_isolation(sphy, true);
spin_unlock_irqrestore(&sphy->lock, flags);
clk_disable_unprepare(sphy->clk);
}
static const struct of_device_id samsung_usbphy_dt_match[];
static inline const struct samsung_usbphy_drvdata
*samsung_usbphy_get_driver_data(struct platform_device *pdev)
{
if (pdev->dev.of_node) {
const struct of_device_id *match;
match = of_match_node(samsung_usbphy_dt_match,
pdev->dev.of_node);
return match->data;
}
return (struct samsung_usbphy_drvdata *)
platform_get_device_id(pdev)->driver_data;
}
static int samsung_usbphy_probe(struct platform_device *pdev)
{
struct samsung_usbphy *sphy;
struct usb_otg *otg;
struct samsung_usbphy_data *pdata = pdev->dev.platform_data;
const struct samsung_usbphy_drvdata *drv_data;
struct device *dev = &pdev->dev;
struct resource *phy_mem;
void __iomem *phy_base;
struct clk *clk;
int ret;
phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!phy_mem) {
dev_err(dev, "%s: missing mem resource\n", __func__);
return -ENODEV;
}
phy_base = devm_ioremap_resource(dev, phy_mem);
if (IS_ERR(phy_base))
return PTR_ERR(phy_base);
sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
if (!sphy)
return -ENOMEM;
otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL);
if (!otg)
return -ENOMEM;
drv_data = samsung_usbphy_get_driver_data(pdev);
if (drv_data->cpu_type == TYPE_EXYNOS5250)
clk = devm_clk_get(dev, "usbhost");
else
clk = devm_clk_get(dev, "otg");
if (IS_ERR(clk)) {
dev_err(dev, "Failed to get otg clock\n");
return PTR_ERR(clk);
}
sphy->dev = dev;
if (dev->of_node) {
ret = samsung_usbphy_parse_dt(sphy);
if (ret < 0)
return ret;
} else {
if (!pdata) {
dev_err(dev, "no platform data specified\n");
return -EINVAL;
}
}
sphy->plat = pdata;
sphy->regs = phy_base;
sphy->clk = clk;
sphy->drv_data = drv_data;
sphy->phy.dev = sphy->dev;
sphy->phy.label = "samsung-usbphy";
sphy->phy.init = samsung_usbphy_init;
sphy->phy.shutdown = samsung_usbphy_shutdown;
sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
sphy->phy.otg = otg;
sphy->phy.otg->phy = &sphy->phy;
sphy->phy.otg->set_host = samsung_usbphy_set_host;
spin_lock_init(&sphy->lock);
platform_set_drvdata(pdev, sphy);
return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
}
static int samsung_usbphy_remove(struct platform_device *pdev)
{
struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
usb_remove_phy(&sphy->phy);
if (sphy->pmuregs)
iounmap(sphy->pmuregs);
if (sphy->sysreg)
iounmap(sphy->sysreg);
return 0;
}
static const struct samsung_usbphy_drvdata usbphy_s3c64xx = {
.cpu_type = TYPE_S3C64XX,
.devphy_en_mask = S3C64XX_USBPHY_ENABLE,
};
static const struct samsung_usbphy_drvdata usbphy_exynos4 = {
.cpu_type = TYPE_EXYNOS4210,
.devphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
};
static struct samsung_usbphy_drvdata usbphy_exynos5 = {
.cpu_type = TYPE_EXYNOS5250,
.hostphy_en_mask = EXYNOS_USBPHY_ENABLE,
.hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET,
};
#ifdef CONFIG_OF
static const struct of_device_id samsung_usbphy_dt_match[] = {
{
.compatible = "samsung,s3c64xx-usbphy",
.data = &usbphy_s3c64xx,
}, {
.compatible = "samsung,exynos4210-usbphy",
.data = &usbphy_exynos4,
}, {
.compatible = "samsung,exynos5250-usbphy",
.data = &usbphy_exynos5
},
{},
};
MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
#endif
static struct platform_device_id samsung_usbphy_driver_ids[] = {
{
.name = "s3c64xx-usbphy",
.driver_data = (unsigned long)&usbphy_s3c64xx,
}, {
.name = "exynos4210-usbphy",
.driver_data = (unsigned long)&usbphy_exynos4,
}, {
.name = "exynos5250-usbphy",
.driver_data = (unsigned long)&usbphy_exynos5,
},
{},
};
MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
static struct platform_driver samsung_usbphy_driver = {
.probe = samsung_usbphy_probe,
.remove = samsung_usbphy_remove,
.id_table = samsung_usbphy_driver_ids,
.driver = {
.name = "samsung-usbphy",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
},
};
module_platform_driver(samsung_usbphy_driver);
MODULE_DESCRIPTION("Samsung USB phy controller");
MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:samsung-usbphy");