| /* |
| * ALSA SoC I2S Audio Layer for the Stretch S6000 family |
| * |
| * Author: Daniel Gloeckner, <dg@emlix.com> |
| * Copyright: (C) 2009 emlix GmbH <info@emlix.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/module.h> |
| #include <linux/device.h> |
| #include <linux/delay.h> |
| #include <linux/clk.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/slab.h> |
| |
| #include <sound/core.h> |
| #include <sound/pcm.h> |
| #include <sound/pcm_params.h> |
| #include <sound/initval.h> |
| #include <sound/soc.h> |
| |
| #include "s6000-i2s.h" |
| #include "s6000-pcm.h" |
| |
| struct s6000_i2s_dev { |
| dma_addr_t sifbase; |
| u8 __iomem *scbbase; |
| unsigned int wide; |
| unsigned int channel_in; |
| unsigned int channel_out; |
| unsigned int lines_in; |
| unsigned int lines_out; |
| struct s6000_pcm_dma_params dma_params; |
| }; |
| |
| #define S6_I2S_INTERRUPT_STATUS 0x00 |
| #define S6_I2S_INT_OVERRUN 1 |
| #define S6_I2S_INT_UNDERRUN 2 |
| #define S6_I2S_INT_ALIGNMENT 4 |
| #define S6_I2S_INTERRUPT_ENABLE 0x04 |
| #define S6_I2S_INTERRUPT_RAW 0x08 |
| #define S6_I2S_INTERRUPT_CLEAR 0x0C |
| #define S6_I2S_INTERRUPT_SET 0x10 |
| #define S6_I2S_MODE 0x20 |
| #define S6_I2S_DUAL 0 |
| #define S6_I2S_WIDE 1 |
| #define S6_I2S_TX_DEFAULT 0x24 |
| #define S6_I2S_DATA_CFG(c) (0x40 + 0x10 * (c)) |
| #define S6_I2S_IN 0 |
| #define S6_I2S_OUT 1 |
| #define S6_I2S_UNUSED 2 |
| #define S6_I2S_INTERFACE_CFG(c) (0x44 + 0x10 * (c)) |
| #define S6_I2S_DIV_MASK 0x001fff |
| #define S6_I2S_16BIT 0x000000 |
| #define S6_I2S_20BIT 0x002000 |
| #define S6_I2S_24BIT 0x004000 |
| #define S6_I2S_32BIT 0x006000 |
| #define S6_I2S_BITS_MASK 0x006000 |
| #define S6_I2S_MEM_16BIT 0x000000 |
| #define S6_I2S_MEM_32BIT 0x008000 |
| #define S6_I2S_MEM_MASK 0x008000 |
| #define S6_I2S_CHANNELS_SHIFT 16 |
| #define S6_I2S_CHANNELS_MASK 0x030000 |
| #define S6_I2S_SCK_IN 0x000000 |
| #define S6_I2S_SCK_OUT 0x040000 |
| #define S6_I2S_SCK_DIR 0x040000 |
| #define S6_I2S_WS_IN 0x000000 |
| #define S6_I2S_WS_OUT 0x080000 |
| #define S6_I2S_WS_DIR 0x080000 |
| #define S6_I2S_LEFT_FIRST 0x000000 |
| #define S6_I2S_RIGHT_FIRST 0x100000 |
| #define S6_I2S_FIRST 0x100000 |
| #define S6_I2S_CUR_SCK 0x200000 |
| #define S6_I2S_CUR_WS 0x400000 |
| #define S6_I2S_ENABLE(c) (0x48 + 0x10 * (c)) |
| #define S6_I2S_DISABLE_IF 0x02 |
| #define S6_I2S_ENABLE_IF 0x03 |
| #define S6_I2S_IS_BUSY 0x04 |
| #define S6_I2S_DMA_ACTIVE 0x08 |
| #define S6_I2S_IS_ENABLED 0x10 |
| |
| #define S6_I2S_NUM_LINES 4 |
| |
| #define S6_I2S_SIF_PORT0 0x0000000 |
| #define S6_I2S_SIF_PORT1 0x0000080 /* docs say 0x0000010 */ |
| |
| static inline void s6_i2s_write_reg(struct s6000_i2s_dev *dev, int reg, u32 val) |
| { |
| writel(val, dev->scbbase + reg); |
| } |
| |
| static inline u32 s6_i2s_read_reg(struct s6000_i2s_dev *dev, int reg) |
| { |
| return readl(dev->scbbase + reg); |
| } |
| |
| static inline void s6_i2s_mod_reg(struct s6000_i2s_dev *dev, int reg, |
| u32 mask, u32 val) |
| { |
| val ^= s6_i2s_read_reg(dev, reg) & ~mask; |
| s6_i2s_write_reg(dev, reg, val); |
| } |
| |
| static void s6000_i2s_start_channel(struct s6000_i2s_dev *dev, int channel) |
| { |
| int i, j, cur, prev; |
| |
| /* |
| * Wait for WCLK to toggle 5 times before enabling the channel |
| * s6000 Family Datasheet 3.6.4: |
| * "At least two cycles of WS must occur between commands |
| * to disable or enable the interface" |
| */ |
| j = 0; |
| prev = ~S6_I2S_CUR_WS; |
| for (i = 1000000; --i && j < 6; ) { |
| cur = s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(channel)) |
| & S6_I2S_CUR_WS; |
| if (prev != cur) { |
| prev = cur; |
| j++; |
| } |
| } |
| if (j < 6) |
| printk(KERN_WARNING "s6000-i2s: timeout waiting for WCLK\n"); |
| |
| s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_ENABLE_IF); |
| } |
| |
| static void s6000_i2s_stop_channel(struct s6000_i2s_dev *dev, int channel) |
| { |
| s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_DISABLE_IF); |
| } |
| |
| static void s6000_i2s_start(struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai); |
| int channel; |
| |
| channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? |
| dev->channel_out : dev->channel_in; |
| |
| s6000_i2s_start_channel(dev, channel); |
| } |
| |
| static void s6000_i2s_stop(struct snd_pcm_substream *substream) |
| { |
| struct snd_soc_pcm_runtime *rtd = substream->private_data; |
| struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai); |
| int channel; |
| |
| channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? |
| dev->channel_out : dev->channel_in; |
| |
| s6000_i2s_stop_channel(dev, channel); |
| } |
| |
| static int s6000_i2s_trigger(struct snd_pcm_substream *substream, int cmd, |
| int after) |
| { |
| switch (cmd) { |
| case SNDRV_PCM_TRIGGER_START: |
| case SNDRV_PCM_TRIGGER_RESUME: |
| case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: |
| if ((substream->stream == SNDRV_PCM_STREAM_CAPTURE) ^ !after) |
| s6000_i2s_start(substream); |
| break; |
| case SNDRV_PCM_TRIGGER_STOP: |
| case SNDRV_PCM_TRIGGER_SUSPEND: |
| case SNDRV_PCM_TRIGGER_PAUSE_PUSH: |
| if (!after) |
| s6000_i2s_stop(substream); |
| } |
| return 0; |
| } |
| |
| static unsigned int s6000_i2s_int_sources(struct s6000_i2s_dev *dev) |
| { |
| unsigned int pending; |
| pending = s6_i2s_read_reg(dev, S6_I2S_INTERRUPT_RAW); |
| pending &= S6_I2S_INT_ALIGNMENT | |
| S6_I2S_INT_UNDERRUN | |
| S6_I2S_INT_OVERRUN; |
| s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR, pending); |
| |
| return pending; |
| } |
| |
| static unsigned int s6000_i2s_check_xrun(struct snd_soc_dai *cpu_dai) |
| { |
| struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(cpu_dai); |
| unsigned int errors; |
| unsigned int ret; |
| |
| errors = s6000_i2s_int_sources(dev); |
| if (likely(!errors)) |
| return 0; |
| |
| ret = 0; |
| if (errors & S6_I2S_INT_ALIGNMENT) |
| printk(KERN_ERR "s6000-i2s: WCLK misaligned\n"); |
| if (errors & S6_I2S_INT_UNDERRUN) |
| ret |= 1 << SNDRV_PCM_STREAM_PLAYBACK; |
| if (errors & S6_I2S_INT_OVERRUN) |
| ret |= 1 << SNDRV_PCM_STREAM_CAPTURE; |
| return ret; |
| } |
| |
| static void s6000_i2s_wait_disabled(struct s6000_i2s_dev *dev) |
| { |
| int channel; |
| int n = 50; |
| for (channel = 0; channel < 2; channel++) { |
| while (--n >= 0) { |
| int v = s6_i2s_read_reg(dev, S6_I2S_ENABLE(channel)); |
| if ((v & S6_I2S_IS_ENABLED) |
| || !(v & (S6_I2S_DMA_ACTIVE | S6_I2S_IS_BUSY))) |
| break; |
| udelay(20); |
| } |
| } |
| if (n < 0) |
| printk(KERN_WARNING "s6000-i2s: timeout disabling interfaces"); |
| } |
| |
| static int s6000_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai, |
| unsigned int fmt) |
| { |
| struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(cpu_dai); |
| u32 w; |
| |
| switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { |
| case SND_SOC_DAIFMT_CBM_CFM: |
| w = S6_I2S_SCK_IN | S6_I2S_WS_IN; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFM: |
| w = S6_I2S_SCK_OUT | S6_I2S_WS_IN; |
| break; |
| case SND_SOC_DAIFMT_CBM_CFS: |
| w = S6_I2S_SCK_IN | S6_I2S_WS_OUT; |
| break; |
| case SND_SOC_DAIFMT_CBS_CFS: |
| w = S6_I2S_SCK_OUT | S6_I2S_WS_OUT; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| switch (fmt & SND_SOC_DAIFMT_INV_MASK) { |
| case SND_SOC_DAIFMT_NB_NF: |
| w |= S6_I2S_LEFT_FIRST; |
| break; |
| case SND_SOC_DAIFMT_NB_IF: |
| w |= S6_I2S_RIGHT_FIRST; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(0), |
| S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w); |
| s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(1), |
| S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w); |
| |
| return 0; |
| } |
| |
| static int s6000_i2s_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div) |
| { |
| struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai); |
| |
| if (!div || (div & 1) || div > (S6_I2S_DIV_MASK + 1) * 2) |
| return -EINVAL; |
| |
| s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(div_id), |
| S6_I2S_DIV_MASK, div / 2 - 1); |
| return 0; |
| } |
| |
| static int s6000_i2s_hw_params(struct snd_pcm_substream *substream, |
| struct snd_pcm_hw_params *params, |
| struct snd_soc_dai *dai) |
| { |
| struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai); |
| int interf; |
| u32 w = 0; |
| |
| if (dev->wide) |
| interf = 0; |
| else { |
| w |= (((params_channels(params) - 2) / 2) |
| << S6_I2S_CHANNELS_SHIFT) & S6_I2S_CHANNELS_MASK; |
| interf = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) |
| ? dev->channel_out : dev->channel_in; |
| } |
| |
| switch (params_format(params)) { |
| case SNDRV_PCM_FORMAT_S16_LE: |
| w |= S6_I2S_16BIT | S6_I2S_MEM_16BIT; |
| break; |
| case SNDRV_PCM_FORMAT_S32_LE: |
| w |= S6_I2S_32BIT | S6_I2S_MEM_32BIT; |
| break; |
| default: |
| printk(KERN_WARNING "s6000-i2s: unsupported PCM format %x\n", |
| params_format(params)); |
| return -EINVAL; |
| } |
| |
| if (s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(interf)) |
| & S6_I2S_IS_ENABLED) { |
| printk(KERN_ERR "s6000-i2s: interface already enabled\n"); |
| return -EBUSY; |
| } |
| |
| s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(interf), |
| S6_I2S_CHANNELS_MASK|S6_I2S_MEM_MASK|S6_I2S_BITS_MASK, |
| w); |
| |
| return 0; |
| } |
| |
| static int s6000_i2s_dai_probe(struct snd_soc_dai *dai) |
| { |
| struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai); |
| struct s6000_snd_platform_data *pdata = dai->dev->platform_data; |
| |
| if (!pdata) |
| return -EINVAL; |
| |
| dai->capture_dma_data = &dev->dma_params; |
| dai->playback_dma_data = &dev->dma_params; |
| |
| dev->wide = pdata->wide; |
| dev->channel_in = pdata->channel_in; |
| dev->channel_out = pdata->channel_out; |
| dev->lines_in = pdata->lines_in; |
| dev->lines_out = pdata->lines_out; |
| |
| s6_i2s_write_reg(dev, S6_I2S_MODE, |
| dev->wide ? S6_I2S_WIDE : S6_I2S_DUAL); |
| |
| if (dev->wide) { |
| int i; |
| |
| if (dev->lines_in + dev->lines_out > S6_I2S_NUM_LINES) |
| return -EINVAL; |
| |
| dev->channel_in = 0; |
| dev->channel_out = 1; |
| dai->driver->capture.channels_min = 2 * dev->lines_in; |
| dai->driver->capture.channels_max = dai->driver->capture.channels_min; |
| dai->driver->playback.channels_min = 2 * dev->lines_out; |
| dai->driver->playback.channels_max = dai->driver->playback.channels_min; |
| |
| for (i = 0; i < dev->lines_out; i++) |
| s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_OUT); |
| |
| for (; i < S6_I2S_NUM_LINES - dev->lines_in; i++) |
| s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), |
| S6_I2S_UNUSED); |
| |
| for (; i < S6_I2S_NUM_LINES; i++) |
| s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_IN); |
| } else { |
| unsigned int cfg[2] = {S6_I2S_UNUSED, S6_I2S_UNUSED}; |
| |
| if (dev->lines_in > 1 || dev->lines_out > 1) |
| return -EINVAL; |
| |
| dai->driver->capture.channels_min = 2 * dev->lines_in; |
| dai->driver->capture.channels_max = 8 * dev->lines_in; |
| dai->driver->playback.channels_min = 2 * dev->lines_out; |
| dai->driver->playback.channels_max = 8 * dev->lines_out; |
| |
| if (dev->lines_in) |
| cfg[dev->channel_in] = S6_I2S_IN; |
| if (dev->lines_out) |
| cfg[dev->channel_out] = S6_I2S_OUT; |
| |
| s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(0), cfg[0]); |
| s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(1), cfg[1]); |
| } |
| |
| if (dev->lines_out) { |
| if (dev->lines_in) { |
| if (!dev->dma_params.dma_out) |
| return -ENODEV; |
| } else { |
| dev->dma_params.dma_out = dev->dma_params.dma_in; |
| dev->dma_params.dma_in = 0; |
| } |
| } |
| dev->dma_params.sif_in = dev->sifbase + (dev->channel_in ? |
| S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0); |
| dev->dma_params.sif_out = dev->sifbase + (dev->channel_out ? |
| S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0); |
| dev->dma_params.same_rate = pdata->same_rate | pdata->wide; |
| return 0; |
| } |
| |
| #define S6000_I2S_RATES (SNDRV_PCM_RATE_CONTINUOUS | SNDRV_PCM_RATE_5512 | \ |
| SNDRV_PCM_RATE_8000_192000) |
| #define S6000_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE) |
| |
| static struct snd_soc_dai_ops s6000_i2s_dai_ops = { |
| .set_fmt = s6000_i2s_set_dai_fmt, |
| .set_clkdiv = s6000_i2s_set_clkdiv, |
| .hw_params = s6000_i2s_hw_params, |
| }; |
| |
| static struct snd_soc_dai_driver s6000_i2s_dai = { |
| .probe = s6000_i2s_dai_probe, |
| .playback = { |
| .channels_min = 2, |
| .channels_max = 8, |
| .formats = S6000_I2S_FORMATS, |
| .rates = S6000_I2S_RATES, |
| .rate_min = 0, |
| .rate_max = 1562500, |
| }, |
| .capture = { |
| .channels_min = 2, |
| .channels_max = 8, |
| .formats = S6000_I2S_FORMATS, |
| .rates = S6000_I2S_RATES, |
| .rate_min = 0, |
| .rate_max = 1562500, |
| }, |
| .ops = &s6000_i2s_dai_ops, |
| } |
| |
| static int __devinit s6000_i2s_probe(struct platform_device *pdev) |
| { |
| struct s6000_i2s_dev *dev; |
| struct resource *scbmem, *sifmem, *region, *dma1, *dma2; |
| u8 __iomem *mmio; |
| int ret; |
| |
| scbmem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| if (!scbmem) { |
| dev_err(&pdev->dev, "no mem resource?\n"); |
| ret = -ENODEV; |
| goto err_release_none; |
| } |
| |
| region = request_mem_region(scbmem->start, resource_size(scbmem), |
| pdev->name); |
| if (!region) { |
| dev_err(&pdev->dev, "I2S SCB region already claimed\n"); |
| ret = -EBUSY; |
| goto err_release_none; |
| } |
| |
| mmio = ioremap(scbmem->start, resource_size(scbmem)); |
| if (!mmio) { |
| dev_err(&pdev->dev, "can't ioremap SCB region\n"); |
| ret = -ENOMEM; |
| goto err_release_scb; |
| } |
| |
| sifmem = platform_get_resource(pdev, IORESOURCE_MEM, 1); |
| if (!sifmem) { |
| dev_err(&pdev->dev, "no second mem resource?\n"); |
| ret = -ENODEV; |
| goto err_release_map; |
| } |
| |
| region = request_mem_region(sifmem->start, resource_size(sifmem), |
| pdev->name); |
| if (!region) { |
| dev_err(&pdev->dev, "I2S SIF region already claimed\n"); |
| ret = -EBUSY; |
| goto err_release_map; |
| } |
| |
| dma1 = platform_get_resource(pdev, IORESOURCE_DMA, 0); |
| if (!dma1) { |
| dev_err(&pdev->dev, "no dma resource?\n"); |
| ret = -ENODEV; |
| goto err_release_sif; |
| } |
| |
| region = request_mem_region(dma1->start, resource_size(dma1), |
| pdev->name); |
| if (!region) { |
| dev_err(&pdev->dev, "I2S DMA region already claimed\n"); |
| ret = -EBUSY; |
| goto err_release_sif; |
| } |
| |
| dma2 = platform_get_resource(pdev, IORESOURCE_DMA, 1); |
| if (dma2) { |
| region = request_mem_region(dma2->start, resource_size(dma2), |
| pdev->name); |
| if (!region) { |
| dev_err(&pdev->dev, |
| "I2S DMA region already claimed\n"); |
| ret = -EBUSY; |
| goto err_release_dma1; |
| } |
| } |
| |
| dev = kzalloc(sizeof(struct s6000_i2s_dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto err_release_dma2; |
| } |
| dev_set_drvdata(&pdev->dev, dev); |
| |
| dev->sifbase = sifmem->start; |
| dev->scbbase = mmio; |
| |
| s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0); |
| s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR, |
| S6_I2S_INT_ALIGNMENT | |
| S6_I2S_INT_UNDERRUN | |
| S6_I2S_INT_OVERRUN); |
| |
| s6000_i2s_stop_channel(dev, 0); |
| s6000_i2s_stop_channel(dev, 1); |
| s6000_i2s_wait_disabled(dev); |
| |
| dev->dma_params.check_xrun = s6000_i2s_check_xrun; |
| dev->dma_params.trigger = s6000_i2s_trigger; |
| dev->dma_params.dma_in = dma1->start; |
| dev->dma_params.dma_out = dma2 ? dma2->start : 0; |
| dev->dma_params.irq = platform_get_irq(pdev, 0); |
| if (dev->dma_params.irq < 0) { |
| dev_err(&pdev->dev, "no irq resource?\n"); |
| ret = -ENODEV; |
| goto err_release_dev; |
| } |
| |
| s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, |
| S6_I2S_INT_ALIGNMENT | |
| S6_I2S_INT_UNDERRUN | |
| S6_I2S_INT_OVERRUN); |
| |
| ret = snd_soc_register_dai(&pdev->dev, &s6000_i2s_dai); |
| if (ret) |
| goto err_release_dev; |
| |
| return 0; |
| |
| err_release_dev: |
| kfree(dev); |
| err_release_dma2: |
| if (dma2) |
| release_mem_region(dma2->start, resource_size(dma2)); |
| err_release_dma1: |
| release_mem_region(dma1->start, resource_size(dma1)); |
| err_release_sif: |
| release_mem_region(sifmem->start, resource_size(sifmem)); |
| err_release_map: |
| iounmap(mmio); |
| err_release_scb: |
| release_mem_region(scbmem->start, resource_size(scbmem)); |
| err_release_none: |
| return ret; |
| } |
| |
| static void __devexit s6000_i2s_remove(struct platform_device *pdev) |
| { |
| struct s6000_i2s_dev *dev = dev_get_drvdata(&pdev->dev); |
| struct resource *region; |
| void __iomem *mmio = dev->scbbase; |
| |
| snd_soc_unregister_dai(&pdev->dev); |
| |
| s6000_i2s_stop_channel(dev, 0); |
| s6000_i2s_stop_channel(dev, 1); |
| |
| s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0); |
| kfree(dev); |
| |
| region = platform_get_resource(pdev, IORESOURCE_DMA, 0); |
| release_mem_region(region->start, resource_size(region)); |
| |
| region = platform_get_resource(pdev, IORESOURCE_DMA, 1); |
| if (region) |
| release_mem_region(region->start, resource_size(region)); |
| |
| region = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| release_mem_region(region->start, resource_size(region)); |
| |
| iounmap(mmio); |
| region = platform_get_resource(pdev, IORESOURCE_IO, 0); |
| release_mem_region(region->start, resource_size(region)); |
| } |
| |
| static struct platform_driver s6000_i2s_driver = { |
| .probe = s6000_i2s_probe, |
| .remove = __devexit_p(s6000_i2s_remove), |
| .driver = { |
| .name = "s6000-i2s", |
| .owner = THIS_MODULE, |
| }, |
| }; |
| |
| static int __init s6000_i2s_init(void) |
| { |
| return platform_driver_register(&s6000_i2s_driver); |
| } |
| module_init(s6000_i2s_init); |
| |
| static void __exit s6000_i2s_exit(void) |
| { |
| platform_driver_unregister(&s6000_i2s_driver); |
| } |
| module_exit(s6000_i2s_exit); |
| |
| MODULE_AUTHOR("Daniel Gloeckner"); |
| MODULE_DESCRIPTION("Stretch s6000 family I2S SoC Interface"); |
| MODULE_LICENSE("GPL"); |