| /* |
| * IBM PowerPC Virtual I/O Infrastructure Support. |
| * |
| * Copyright (c) 2003-2005 IBM Corp. |
| * Dave Engebretsen engebret@us.ibm.com |
| * Santiago Leon santil@us.ibm.com |
| * Hollis Blanchard <hollisb@us.ibm.com> |
| * Stephen Rothwell |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License |
| * as published by the Free Software Foundation; either version |
| * 2 of the License, or (at your option) any later version. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/device.h> |
| #include <linux/init.h> |
| #include <linux/console.h> |
| #include <linux/module.h> |
| #include <linux/mm.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/kobject.h> |
| |
| #include <asm/iommu.h> |
| #include <asm/dma.h> |
| #include <asm/vio.h> |
| #include <asm/prom.h> |
| #include <asm/firmware.h> |
| #include <asm/tce.h> |
| #include <asm/abs_addr.h> |
| #include <asm/page.h> |
| #include <asm/hvcall.h> |
| #include <asm/iseries/vio.h> |
| #include <asm/iseries/hv_types.h> |
| #include <asm/iseries/hv_lp_config.h> |
| #include <asm/iseries/hv_call_xm.h> |
| #include <asm/iseries/iommu.h> |
| |
| extern struct subsystem devices_subsys; /* needed for vio_find_name() */ |
| |
| static struct vio_dev vio_bus_device = { /* fake "parent" device */ |
| .name = vio_bus_device.dev.bus_id, |
| .type = "", |
| .dev.bus_id = "vio", |
| .dev.bus = &vio_bus_type, |
| }; |
| |
| #ifdef CONFIG_PPC_ISERIES |
| struct device *iSeries_vio_dev = &vio_bus_device.dev; |
| EXPORT_SYMBOL(iSeries_vio_dev); |
| |
| static struct iommu_table veth_iommu_table; |
| static struct iommu_table vio_iommu_table; |
| |
| static void __init iommu_vio_init(void) |
| { |
| iommu_table_getparms_iSeries(255, 0, 0xff, &veth_iommu_table); |
| veth_iommu_table.it_size /= 2; |
| vio_iommu_table = veth_iommu_table; |
| vio_iommu_table.it_offset += veth_iommu_table.it_size; |
| |
| if (!iommu_init_table(&veth_iommu_table, -1)) |
| printk("Virtual Bus VETH TCE table failed.\n"); |
| if (!iommu_init_table(&vio_iommu_table, -1)) |
| printk("Virtual Bus VIO TCE table failed.\n"); |
| } |
| #endif |
| |
| static struct iommu_table *vio_build_iommu_table(struct vio_dev *dev) |
| { |
| #ifdef CONFIG_PPC_ISERIES |
| if (firmware_has_feature(FW_FEATURE_ISERIES)) { |
| if (strcmp(dev->type, "network") == 0) |
| return &veth_iommu_table; |
| return &vio_iommu_table; |
| } else |
| #endif |
| { |
| const unsigned char *dma_window; |
| struct iommu_table *tbl; |
| unsigned long offset, size; |
| |
| dma_window = get_property(dev->dev.archdata.of_node, |
| "ibm,my-dma-window", NULL); |
| if (!dma_window) |
| return NULL; |
| |
| tbl = kmalloc(sizeof(*tbl), GFP_KERNEL); |
| |
| of_parse_dma_window(dev->dev.archdata.of_node, dma_window, |
| &tbl->it_index, &offset, &size); |
| |
| /* TCE table size - measured in tce entries */ |
| tbl->it_size = size >> IOMMU_PAGE_SHIFT; |
| /* offset for VIO should always be 0 */ |
| tbl->it_offset = offset >> IOMMU_PAGE_SHIFT; |
| tbl->it_busno = 0; |
| tbl->it_type = TCE_VB; |
| |
| return iommu_init_table(tbl, -1); |
| } |
| } |
| |
| /** |
| * vio_match_device: - Tell if a VIO device has a matching |
| * VIO device id structure. |
| * @ids: array of VIO device id structures to search in |
| * @dev: the VIO device structure to match against |
| * |
| * Used by a driver to check whether a VIO device present in the |
| * system is in its list of supported devices. Returns the matching |
| * vio_device_id structure or NULL if there is no match. |
| */ |
| static const struct vio_device_id *vio_match_device( |
| const struct vio_device_id *ids, const struct vio_dev *dev) |
| { |
| while (ids->type[0] != '\0') { |
| if ((strncmp(dev->type, ids->type, strlen(ids->type)) == 0) && |
| device_is_compatible(dev->dev.archdata.of_node, |
| ids->compat)) |
| return ids; |
| ids++; |
| } |
| return NULL; |
| } |
| |
| /* |
| * Convert from struct device to struct vio_dev and pass to driver. |
| * dev->driver has already been set by generic code because vio_bus_match |
| * succeeded. |
| */ |
| static int vio_bus_probe(struct device *dev) |
| { |
| struct vio_dev *viodev = to_vio_dev(dev); |
| struct vio_driver *viodrv = to_vio_driver(dev->driver); |
| const struct vio_device_id *id; |
| int error = -ENODEV; |
| |
| if (!viodrv->probe) |
| return error; |
| |
| id = vio_match_device(viodrv->id_table, viodev); |
| if (id) |
| error = viodrv->probe(viodev, id); |
| |
| return error; |
| } |
| |
| /* convert from struct device to struct vio_dev and pass to driver. */ |
| static int vio_bus_remove(struct device *dev) |
| { |
| struct vio_dev *viodev = to_vio_dev(dev); |
| struct vio_driver *viodrv = to_vio_driver(dev->driver); |
| |
| if (viodrv->remove) |
| return viodrv->remove(viodev); |
| |
| /* driver can't remove */ |
| return 1; |
| } |
| |
| /* convert from struct device to struct vio_dev and pass to driver. */ |
| static void vio_bus_shutdown(struct device *dev) |
| { |
| struct vio_dev *viodev = to_vio_dev(dev); |
| struct vio_driver *viodrv = to_vio_driver(dev->driver); |
| |
| if (dev->driver && viodrv->shutdown) |
| viodrv->shutdown(viodev); |
| } |
| |
| /** |
| * vio_register_driver: - Register a new vio driver |
| * @drv: The vio_driver structure to be registered. |
| */ |
| int vio_register_driver(struct vio_driver *viodrv) |
| { |
| printk(KERN_DEBUG "%s: driver %s registering\n", __FUNCTION__, |
| viodrv->driver.name); |
| |
| /* fill in 'struct driver' fields */ |
| viodrv->driver.bus = &vio_bus_type; |
| |
| return driver_register(&viodrv->driver); |
| } |
| EXPORT_SYMBOL(vio_register_driver); |
| |
| /** |
| * vio_unregister_driver - Remove registration of vio driver. |
| * @driver: The vio_driver struct to be removed form registration |
| */ |
| void vio_unregister_driver(struct vio_driver *viodrv) |
| { |
| driver_unregister(&viodrv->driver); |
| } |
| EXPORT_SYMBOL(vio_unregister_driver); |
| |
| /* vio_dev refcount hit 0 */ |
| static void __devinit vio_dev_release(struct device *dev) |
| { |
| if (dev->archdata.of_node) { |
| /* XXX should free TCE table */ |
| of_node_put(dev->archdata.of_node); |
| } |
| kfree(to_vio_dev(dev)); |
| } |
| |
| /** |
| * vio_register_device_node: - Register a new vio device. |
| * @of_node: The OF node for this device. |
| * |
| * Creates and initializes a vio_dev structure from the data in |
| * of_node and adds it to the list of virtual devices. |
| * Returns a pointer to the created vio_dev or NULL if node has |
| * NULL device_type or compatible fields. |
| */ |
| struct vio_dev * __devinit vio_register_device_node(struct device_node *of_node) |
| { |
| struct vio_dev *viodev; |
| const unsigned int *unit_address; |
| |
| /* we need the 'device_type' property, in order to match with drivers */ |
| if (of_node->type == NULL) { |
| printk(KERN_WARNING "%s: node %s missing 'device_type'\n", |
| __FUNCTION__, |
| of_node->name ? of_node->name : "<unknown>"); |
| return NULL; |
| } |
| |
| unit_address = get_property(of_node, "reg", NULL); |
| if (unit_address == NULL) { |
| printk(KERN_WARNING "%s: node %s missing 'reg'\n", |
| __FUNCTION__, |
| of_node->name ? of_node->name : "<unknown>"); |
| return NULL; |
| } |
| |
| /* allocate a vio_dev for this node */ |
| viodev = kzalloc(sizeof(struct vio_dev), GFP_KERNEL); |
| if (viodev == NULL) |
| return NULL; |
| |
| viodev->irq = irq_of_parse_and_map(of_node, 0); |
| |
| snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address); |
| viodev->name = of_node->name; |
| viodev->type = of_node->type; |
| viodev->unit_address = *unit_address; |
| if (firmware_has_feature(FW_FEATURE_ISERIES)) { |
| unit_address = get_property(of_node, |
| "linux,unit_address", NULL); |
| if (unit_address != NULL) |
| viodev->unit_address = *unit_address; |
| } |
| viodev->dev.archdata.of_node = of_node_get(of_node); |
| viodev->dev.archdata.dma_ops = &dma_iommu_ops; |
| viodev->dev.archdata.dma_data = vio_build_iommu_table(viodev); |
| viodev->dev.archdata.numa_node = of_node_to_nid(of_node); |
| |
| /* init generic 'struct device' fields: */ |
| viodev->dev.parent = &vio_bus_device.dev; |
| viodev->dev.bus = &vio_bus_type; |
| viodev->dev.release = vio_dev_release; |
| |
| /* register with generic device framework */ |
| if (device_register(&viodev->dev)) { |
| printk(KERN_ERR "%s: failed to register device %s\n", |
| __FUNCTION__, viodev->dev.bus_id); |
| /* XXX free TCE table */ |
| kfree(viodev); |
| return NULL; |
| } |
| |
| return viodev; |
| } |
| EXPORT_SYMBOL(vio_register_device_node); |
| |
| /** |
| * vio_bus_init: - Initialize the virtual IO bus |
| */ |
| static int __init vio_bus_init(void) |
| { |
| int err; |
| struct device_node *node_vroot; |
| |
| #ifdef CONFIG_PPC_ISERIES |
| if (firmware_has_feature(FW_FEATURE_ISERIES)) { |
| iommu_vio_init(); |
| vio_bus_device.dev.archdata.dma_ops = &dma_iommu_ops; |
| vio_bus_device.dev.archdata.dma_data = &vio_iommu_table; |
| iSeries_vio_dev = &vio_bus_device.dev; |
| } |
| #endif /* CONFIG_PPC_ISERIES */ |
| |
| err = bus_register(&vio_bus_type); |
| if (err) { |
| printk(KERN_ERR "failed to register VIO bus\n"); |
| return err; |
| } |
| |
| /* |
| * The fake parent of all vio devices, just to give us |
| * a nice directory |
| */ |
| err = device_register(&vio_bus_device.dev); |
| if (err) { |
| printk(KERN_WARNING "%s: device_register returned %i\n", |
| __FUNCTION__, err); |
| return err; |
| } |
| |
| node_vroot = find_devices("vdevice"); |
| if (node_vroot) { |
| struct device_node *of_node; |
| |
| /* |
| * Create struct vio_devices for each virtual device in |
| * the device tree. Drivers will associate with them later. |
| */ |
| for (of_node = node_vroot->child; of_node != NULL; |
| of_node = of_node->sibling) { |
| printk(KERN_DEBUG "%s: processing %p\n", |
| __FUNCTION__, of_node); |
| vio_register_device_node(of_node); |
| } |
| } |
| |
| return 0; |
| } |
| __initcall(vio_bus_init); |
| |
| static ssize_t name_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return sprintf(buf, "%s\n", to_vio_dev(dev)->name); |
| } |
| |
| static ssize_t devspec_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct device_node *of_node = dev->archdata.of_node; |
| |
| return sprintf(buf, "%s\n", of_node ? of_node->full_name : "none"); |
| } |
| |
| static struct device_attribute vio_dev_attrs[] = { |
| __ATTR_RO(name), |
| __ATTR_RO(devspec), |
| __ATTR_NULL |
| }; |
| |
| void __devinit vio_unregister_device(struct vio_dev *viodev) |
| { |
| device_unregister(&viodev->dev); |
| } |
| EXPORT_SYMBOL(vio_unregister_device); |
| |
| static int vio_bus_match(struct device *dev, struct device_driver *drv) |
| { |
| const struct vio_dev *vio_dev = to_vio_dev(dev); |
| struct vio_driver *vio_drv = to_vio_driver(drv); |
| const struct vio_device_id *ids = vio_drv->id_table; |
| |
| return (ids != NULL) && (vio_match_device(ids, vio_dev) != NULL); |
| } |
| |
| static int vio_hotplug(struct device *dev, char **envp, int num_envp, |
| char *buffer, int buffer_size) |
| { |
| const struct vio_dev *vio_dev = to_vio_dev(dev); |
| struct device_node *dn; |
| const char *cp; |
| int length; |
| |
| if (!num_envp) |
| return -ENOMEM; |
| |
| dn = dev->archdata.of_node; |
| if (!dn) |
| return -ENODEV; |
| cp = get_property(dn, "compatible", &length); |
| if (!cp) |
| return -ENODEV; |
| |
| envp[0] = buffer; |
| length = scnprintf(buffer, buffer_size, "MODALIAS=vio:T%sS%s", |
| vio_dev->type, cp); |
| if ((buffer_size - length) <= 0) |
| return -ENOMEM; |
| envp[1] = NULL; |
| return 0; |
| } |
| |
| struct bus_type vio_bus_type = { |
| .name = "vio", |
| .dev_attrs = vio_dev_attrs, |
| .uevent = vio_hotplug, |
| .match = vio_bus_match, |
| .probe = vio_bus_probe, |
| .remove = vio_bus_remove, |
| .shutdown = vio_bus_shutdown, |
| }; |
| |
| /** |
| * vio_get_attribute: - get attribute for virtual device |
| * @vdev: The vio device to get property. |
| * @which: The property/attribute to be extracted. |
| * @length: Pointer to length of returned data size (unused if NULL). |
| * |
| * Calls prom.c's get_property() to return the value of the |
| * attribute specified by @which |
| */ |
| const void *vio_get_attribute(struct vio_dev *vdev, char *which, int *length) |
| { |
| return get_property(vdev->dev.archdata.of_node, which, length); |
| } |
| EXPORT_SYMBOL(vio_get_attribute); |
| |
| #ifdef CONFIG_PPC_PSERIES |
| /* vio_find_name() - internal because only vio.c knows how we formatted the |
| * kobject name |
| * XXX once vio_bus_type.devices is actually used as a kset in |
| * drivers/base/bus.c, this function should be removed in favor of |
| * "device_find(kobj_name, &vio_bus_type)" |
| */ |
| static struct vio_dev *vio_find_name(const char *kobj_name) |
| { |
| struct kobject *found; |
| |
| found = kset_find_obj(&devices_subsys.kset, kobj_name); |
| if (!found) |
| return NULL; |
| |
| return to_vio_dev(container_of(found, struct device, kobj)); |
| } |
| |
| /** |
| * vio_find_node - find an already-registered vio_dev |
| * @vnode: device_node of the virtual device we're looking for |
| */ |
| struct vio_dev *vio_find_node(struct device_node *vnode) |
| { |
| const uint32_t *unit_address; |
| char kobj_name[BUS_ID_SIZE]; |
| |
| /* construct the kobject name from the device node */ |
| unit_address = get_property(vnode, "reg", NULL); |
| if (!unit_address) |
| return NULL; |
| snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address); |
| |
| return vio_find_name(kobj_name); |
| } |
| EXPORT_SYMBOL(vio_find_node); |
| |
| int vio_enable_interrupts(struct vio_dev *dev) |
| { |
| int rc = h_vio_signal(dev->unit_address, VIO_IRQ_ENABLE); |
| if (rc != H_SUCCESS) |
| printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc); |
| return rc; |
| } |
| EXPORT_SYMBOL(vio_enable_interrupts); |
| |
| int vio_disable_interrupts(struct vio_dev *dev) |
| { |
| int rc = h_vio_signal(dev->unit_address, VIO_IRQ_DISABLE); |
| if (rc != H_SUCCESS) |
| printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc); |
| return rc; |
| } |
| EXPORT_SYMBOL(vio_disable_interrupts); |
| #endif /* CONFIG_PPC_PSERIES */ |