blob: 2e571eb9313ae6d5b8e49b5829c83ec8a590c354 [file] [log] [blame]
#
# Multimedia Video device configuration
#
menuconfig VIDEO_CAPTURE_DRIVERS
bool "Video capture adapters"
depends on VIDEO_DEV
default y
---help---
Say Y here to enable selecting the video adapters for
webcams, analog TV, and hybrid analog/digital TV.
Some of those devices also supports FM radio.
if VIDEO_CAPTURE_DRIVERS && VIDEO_DEV
config VIDEO_ADV_DEBUG
bool "Enable advanced debug functionality"
default n
---help---
Say Y here to enable advanced debugging functionality on some
V4L devices.
In doubt, say N.
config VIDEO_HELPER_CHIPS_AUTO
bool "Autoselect pertinent encoders/decoders and other helper chips"
default y
---help---
Most video cards may require additional modules to encode or
decode audio/video standards. This option will autoselect
all pertinent modules to each selected video module.
Unselect this only if you know exactly what you are doing, since
it may break support on some boards.
In doubt, say Y.
#
# Encoder / Decoder module configuration
#
menu "Encoders/decoders and other helper chips"
depends on !VIDEO_HELPER_CHIPS_AUTO
comment "Audio decoders"
config VIDEO_TVAUDIO
tristate "Simple audio decoder chips"
depends on VIDEO_V4L1 && I2C
---help---
Support for several audio decoder chips found on some bt8xx boards:
Philips: tda9840, tda9873h, tda9874h/a, tda9850, tda985x, tea6300,
tea6320, tea6420, tda8425, ta8874z.
Microchip: pic16c54 based design on ProVideo PV951 board.
To compile this driver as a module, choose M here: the
module will be called tvaudio.
config VIDEO_TDA7432
tristate "Philips TDA7432 audio processor"
depends on VIDEO_V4L1 && I2C
---help---
Support for tda7432 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
module will be called tda7432.
config VIDEO_TDA9840
tristate "Philips TDA9840 audio processor"
depends on I2C
---help---
Support for tda9840 audio decoder chip found on some Zoran boards.
To compile this driver as a module, choose M here: the
module will be called tda9840.
config VIDEO_TDA9875
tristate "Philips TDA9875 audio processor"
depends on VIDEO_V4L1 && I2C
---help---
Support for tda9875 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
module will be called tda9875.
config VIDEO_TEA6415C
tristate "Philips TEA6415C audio processor"
depends on I2C
---help---
Support for tea6415c audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
module will be called tea6415c.
config VIDEO_TEA6420
tristate "Philips TEA6420 audio processor"
depends on I2C
---help---
Support for tea6420 audio decoder chip found on some bt8xx boards.
To compile this driver as a module, choose M here: the
module will be called tea6420.
config VIDEO_MSP3400
tristate "Micronas MSP34xx audio decoders"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Micronas MSP34xx series of audio decoders.
To compile this driver as a module, choose M here: the
module will be called msp3400.
config VIDEO_CS53L32A
tristate "Cirrus Logic CS53L32A audio ADC"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the Cirrus Logic CS53L32A low voltage
stereo A/D converter.
To compile this driver as a module, choose M here: the
module will be called cs53l32a.
config VIDEO_TLV320AIC23B
tristate "Texas Instruments TLV320AIC23B audio codec"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the Texas Instruments TLV320AIC23B audio codec.
To compile this driver as a module, choose M here: the
module will be called tlv320aic23b.
config VIDEO_WM8775
tristate "Wolfson Microelectronics WM8775 audio ADC with input mixer"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the Wolfson Microelectronics WM8775 high
performance stereo A/D Converter with a 4 channel input mixer.
To compile this driver as a module, choose M here: the
module will be called wm8775.
config VIDEO_WM8739
tristate "Wolfson Microelectronics WM8739 stereo audio ADC"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the Wolfson Microelectronics WM8739
stereo A/D Converter.
To compile this driver as a module, choose M here: the
module will be called wm8739.
config VIDEO_VP27SMPX
tristate "Panasonic VP27s internal MPX"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the internal MPX of the Panasonic VP27s tuner.
To compile this driver as a module, choose M here: the
module will be called vp27smpx.
comment "Video decoders"
config VIDEO_BT819
tristate "BT819A VideoStream decoder"
depends on VIDEO_V4L1 && I2C
---help---
Support for BT819A video decoder.
To compile this driver as a module, choose M here: the
module will be called bt819.
config VIDEO_BT856
tristate "BT856 VideoStream decoder"
depends on VIDEO_V4L1 && I2C
---help---
Support for BT856 video decoder.
To compile this driver as a module, choose M here: the
module will be called bt856.
config VIDEO_BT866
tristate "BT866 VideoStream decoder"
depends on VIDEO_V4L1 && I2C
---help---
Support for BT866 video decoder.
To compile this driver as a module, choose M here: the
module will be called bt866.
config VIDEO_KS0127
tristate "KS0127 video decoder"
depends on VIDEO_V4L1 && I2C
---help---
Support for KS0127 video decoder.
This chip is used on AverMedia AVS6EYES Zoran-based MJPEG
cards.
To compile this driver as a module, choose M here: the
module will be called ks0127.
config VIDEO_OV7670
tristate "OmniVision OV7670 sensor support"
depends on I2C && VIDEO_V4L2
---help---
This is a Video4Linux2 sensor-level driver for the OmniVision
OV7670 VGA camera. It currently only works with the M88ALP01
controller.
config VIDEO_TCM825X
tristate "TCM825x camera sensor support"
depends on I2C && VIDEO_V4L2
---help---
This is a driver for the Toshiba TCM825x VGA camera sensor.
It is used for example in Nokia N800.
config VIDEO_SAA7110
tristate "Philips SAA7110 video decoder"
depends on VIDEO_V4L1 && I2C
---help---
Support for the Philips SAA7110 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7110.
config VIDEO_SAA7111
tristate "Philips SAA7111 video decoder"
depends on VIDEO_V4L1 && I2C
---help---
Support for the Philips SAA711 video decoder.
To compile this driver as a module, choose M here: the
module will be called saa7111.
config VIDEO_SAA7114
tristate "Philips SAA7114 video decoder"
depends on VIDEO_V4L1 && I2C
---help---
Support for the Philips SAA7114 video decoder. This driver
is used only on Zoran driver and should be moved soon to
SAA711x module.
To compile this driver as a module, choose M here: the
module will be called saa7114.
config VIDEO_SAA711X
tristate "Philips SAA7113/4/5 video decoders"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the Philips SAA7113/4/5 video decoders.
To compile this driver as a module, choose M here: the
module will be called saa7115.
config VIDEO_SAA7191
tristate "Philips SAA7191 video decoder"
depends on VIDEO_V4L1 && I2C
---help---
Support for the Philips SAA7191 video decoder.
To compile this driver as a module, choose M here: the
module will be called saa7191.
config VIDEO_TVP5150
tristate "Texas Instruments TVP5150 video decoder"
depends on VIDEO_V4L2 && I2C
---help---
Support for the Texas Instruments TVP5150 video decoder.
To compile this driver as a module, choose M here: the
module will be called tvp5150.
config VIDEO_VPX3220
tristate "vpx3220a, vpx3216b & vpx3214c video decoders"
depends on VIDEO_V4L1 && I2C
---help---
Support for VPX322x video decoders.
To compile this driver as a module, choose M here: the
module will be called vpx3220.
comment "Video and audio decoders"
source "drivers/media/video/cx25840/Kconfig"
comment "MPEG video encoders"
config VIDEO_CX2341X
tristate "Conexant CX2341x MPEG encoders"
depends on VIDEO_V4L2 && EXPERIMENTAL
---help---
Support for the Conexant CX23416 MPEG encoders
and CX23415 MPEG encoder/decoders.
This module currently supports the encoding functions only.
To compile this driver as a module, choose M here: the
module will be called cx2341x.
comment "Video encoders"
config VIDEO_SAA7127
tristate "Philips SAA7127/9 digital video encoders"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the Philips SAA7127/9 digital video encoders.
To compile this driver as a module, choose M here: the
module will be called saa7127.
config VIDEO_SAA7185
tristate "Philips SAA7185 video encoder"
depends on VIDEO_V4L1 && I2C
---help---
Support for the Philips SAA7185 video encoder.
To compile this driver as a module, choose M here: the
module will be called saa7185.
config VIDEO_ADV7170
tristate "Analog Devices ADV7170 video encoder"
depends on VIDEO_V4L1 && I2C
---help---
Support for the Analog Devices ADV7170 video encoder driver
To compile this driver as a module, choose M here: the
module will be called adv7170.
config VIDEO_ADV7175
tristate "Analog Devices ADV7175 video encoder"
depends on VIDEO_V4L1 && I2C
---help---
Support for the Analog Devices ADV7175 video encoder driver
To compile this driver as a module, choose M here: the
module will be called adv7175.
comment "Video improvement chips"
config VIDEO_UPD64031A
tristate "NEC Electronics uPD64031A Ghost Reduction"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the NEC Electronics uPD64031A Ghost Reduction
video chip. It is most often found in NTSC TV cards made for
Japan and is used to reduce the 'ghosting' effect that can
be present in analog TV broadcasts.
To compile this driver as a module, choose M here: the
module will be called upd64031a.
config VIDEO_UPD64083
tristate "NEC Electronics uPD64083 3-Dimensional Y/C separation"
depends on VIDEO_V4L2 && I2C && EXPERIMENTAL
---help---
Support for the NEC Electronics uPD64083 3-Dimensional Y/C
separation video chip. It is used to improve the quality of
the colors of a composite signal.
To compile this driver as a module, choose M here: the
module will be called upd64083.
endmenu # encoder / decoder chips
config VIDEO_VIVI
tristate "Virtual Video Driver"
depends on VIDEO_V4L2 && !SPARC32 && !SPARC64 && PCI
select VIDEOBUF_VMALLOC
default n
---help---
Enables a virtual video driver. This device shows a color bar
and a timestamp, as a real device would generate by using V4L2
api.
Say Y here if you want to test video apps or debug V4L devices.
In doubt, say N.
source "drivers/media/video/bt8xx/Kconfig"
config VIDEO_SAA6588
tristate "SAA6588 Radio Chip RDS decoder support on BT848 cards"
depends on I2C && VIDEO_BT848
help
Support for Radio Data System (RDS) decoder. This allows seeing
radio station identification transmitted using this standard.
Currently, it works only with bt8x8 chips.
To compile this driver as a module, choose M here: the
module will be called saa6588.
config VIDEO_PMS
tristate "Mediavision Pro Movie Studio Video For Linux"
depends on ISA && VIDEO_V4L1
help
Say Y if you have such a thing.
To compile this driver as a module, choose M here: the
module will be called pms.
config VIDEO_PLANB
tristate "PlanB Video-In on PowerMac"
depends on PPC_PMAC && VIDEO_V4L1 && BROKEN
help
PlanB is the V4L driver for the PowerMac 7x00/8x00 series video
input hardware. If you want to experiment with this, say Y.
Otherwise, or if you don't understand a word, say N. See
<http://www.cpu.lu/~mlan/linux/dev/planb.html> for more info.
Saying M will compile this driver as a module (planb).
config VIDEO_BWQCAM
tristate "Quickcam BW Video For Linux"
depends on PARPORT && VIDEO_V4L1
help
Say Y have if you the black and white version of the QuickCam
camera. See the next option for the color version.
To compile this driver as a module, choose M here: the
module will be called bw-qcam.
config VIDEO_CQCAM
tristate "QuickCam Colour Video For Linux (EXPERIMENTAL)"
depends on EXPERIMENTAL && PARPORT && VIDEO_V4L1
help
This is the video4linux driver for the colour version of the
Connectix QuickCam. If you have one of these cameras, say Y here,
otherwise say N. This driver does not work with the original
monochrome QuickCam, QuickCam VC or QuickClip. It is also available
as a module (c-qcam).
Read <file:Documentation/video4linux/CQcam.txt> for more information.
config VIDEO_W9966
tristate "W9966CF Webcam (FlyCam Supra and others) Video For Linux"
depends on PARPORT_1284 && PARPORT && VIDEO_V4L1
help
Video4linux driver for Winbond's w9966 based Webcams.
Currently tested with the LifeView FlyCam Supra.
If you have one of these cameras, say Y here
otherwise say N.
This driver is also available as a module (w9966).
Check out <file:Documentation/video4linux/w9966.txt> for more
information.
config VIDEO_CPIA
tristate "CPiA Video For Linux"
depends on VIDEO_V4L1
---help---
This is the video4linux driver for cameras based on Vision's CPiA
(Colour Processor Interface ASIC), such as the Creative Labs Video
Blaster Webcam II. If you have one of these cameras, say Y here
and select parallel port and/or USB lowlevel support below,
otherwise say N. This will not work with the Creative Webcam III.
Please read <file:Documentation/video4linux/README.cpia> for more
information.
This driver is also available as a module (cpia).
config VIDEO_CPIA_PP
tristate "CPiA Parallel Port Lowlevel Support"
depends on PARPORT_1284 && VIDEO_CPIA && PARPORT
help
This is the lowlevel parallel port support for cameras based on
Vision's CPiA (Colour Processor Interface ASIC), such as the
Creative Webcam II. If you have the parallel port version of one
of these cameras, say Y here, otherwise say N. It is also available
as a module (cpia_pp).
config VIDEO_CPIA_USB
tristate "CPiA USB Lowlevel Support"
depends on VIDEO_CPIA && USB
help
This is the lowlevel USB support for cameras based on Vision's CPiA
(Colour Processor Interface ASIC), such as the Creative Webcam II.
If you have the USB version of one of these cameras, say Y here,
otherwise say N. This will not work with the Creative Webcam III.
It is also available as a module (cpia_usb).
source "drivers/media/video/cpia2/Kconfig"
config VIDEO_SAA5246A
tristate "SAA5246A, SAA5281 Teletext processor"
depends on I2C && VIDEO_V4L2
help
Support for I2C bus based teletext using the SAA5246A or SAA5281
chip. Useful only if you live in Europe.
To compile this driver as a module, choose M here: the
module will be called saa5246a.
config VIDEO_SAA5249
tristate "SAA5249 Teletext processor"
depends on I2C && VIDEO_V4L2
help
Support for I2C bus based teletext using the SAA5249 chip. At the
moment this is only useful on some European WinTV cards.
To compile this driver as a module, choose M here: the
module will be called saa5249.
config TUNER_3036
tristate "SAB3036 tuner"
depends on I2C && VIDEO_V4L1
help
Say Y here to include support for Philips SAB3036 compatible tuners.
If in doubt, say N.
config VIDEO_VINO
tristate "SGI Vino Video For Linux (EXPERIMENTAL)"
depends on I2C && SGI_IP22 && EXPERIMENTAL && VIDEO_V4L2
select I2C_ALGO_SGI
select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
help
Say Y here to build in support for the Vino video input system found
on SGI Indy machines.
config VIDEO_STRADIS
tristate "Stradis 4:2:2 MPEG-2 video driver (EXPERIMENTAL)"
depends on EXPERIMENTAL && PCI && VIDEO_V4L1 && VIRT_TO_BUS
help
Say Y here to enable support for the Stradis 4:2:2 MPEG-2 video
driver for PCI. There is a product page at
<http://www.stradis.com/>.
config VIDEO_ZORAN_ZR36060
tristate
config VIDEO_ZORAN
tristate "Zoran ZR36057/36067 Video For Linux"
depends on PCI && I2C_ALGOBIT && VIDEO_V4L1 && VIRT_TO_BUS
help
Say Y for support for MJPEG capture cards based on the Zoran
36057/36067 PCI controller chipset. This includes the Iomega
Buz, Pinnacle DC10+ and the Linux Media Labs LML33. There is
a driver homepage at <http://mjpeg.sf.net/driver-zoran/>. For
more information, check <file:Documentation/video4linux/Zoran>.
To compile this driver as a module, choose M here: the
module will be called zr36067.
config VIDEO_ZORAN_BUZ
tristate "Iomega Buz support"
depends on VIDEO_ZORAN
select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_SAA7185 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_ZORAN_ZR36060
help
Support for the Iomega Buz MJPEG capture/playback card.
config VIDEO_ZORAN_DC10
tristate "Pinnacle/Miro DC10(+) support"
depends on VIDEO_ZORAN
select VIDEO_SAA7110
select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_ZORAN_ZR36060
help
Support for the Pinnacle/Miro DC10(+) MJPEG capture/playback
card.
config VIDEO_ZORAN_DC30
tristate "Pinnacle/Miro DC30(+) support"
depends on VIDEO_ZORAN
select VIDEO_ADV7175 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_VPX3220 if VIDEO_HELPER_CHIPS_AUTO
help
Support for the Pinnacle/Miro DC30(+) MJPEG capture/playback
card. This also supports really old DC10 cards based on the
zr36050 MJPEG codec and zr36016 VFE.
config VIDEO_ZORAN_LML33
tristate "Linux Media Labs LML33 support"
depends on VIDEO_ZORAN
select VIDEO_BT819 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_ZORAN_ZR36060
help
Support for the Linux Media Labs LML33 MJPEG capture/playback
card.
config VIDEO_ZORAN_LML33R10
tristate "Linux Media Labs LML33R10 support"
depends on VIDEO_ZORAN
select VIDEO_SAA7114 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_ADV7170 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_ZORAN_ZR36060
help
support for the Linux Media Labs LML33R10 MJPEG capture/playback
card.
config VIDEO_ZORAN_AVS6EYES
tristate "AverMedia 6 Eyes support (EXPERIMENTAL)"
depends on VIDEO_ZORAN && EXPERIMENTAL && VIDEO_V4L1
select VIDEO_BT856 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_KS0127 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_ZORAN_ZR36060
help
Support for the AverMedia 6 Eyes video surveillance card.
config VIDEO_MEYE
tristate "Sony Vaio Picturebook Motion Eye Video For Linux"
depends on PCI && SONY_LAPTOP && VIDEO_V4L1
---help---
This is the video4linux driver for the Motion Eye camera found
in the Vaio Picturebook laptops. Please read the material in
<file:Documentation/video4linux/meye.txt> for more information.
If you say Y or M here, you need to say Y or M to "Sony Laptop
Extras" in the misc device section.
To compile this driver as a module, choose M here: the
module will be called meye.
source "drivers/media/video/saa7134/Kconfig"
config VIDEO_MXB
tristate "Siemens-Nixdorf 'Multimedia eXtension Board'"
depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
select VIDEO_TUNER
select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TDA9840 if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TEA6415C if VIDEO_HELPER_CHIPS_AUTO
select VIDEO_TEA6420 if VIDEO_HELPER_CHIPS_AUTO
---help---
This is a video4linux driver for the 'Multimedia eXtension Board'
TV card by Siemens-Nixdorf.
To compile this driver as a module, choose M here: the
module will be called mxb.
config VIDEO_DPC
tristate "Philips-Semiconductors 'dpc7146 demonstration board'"
depends on PCI && VIDEO_V4L1 && I2C
select VIDEO_SAA7146_VV
select VIDEO_SAA7111 if VIDEO_HELPER_CHIPS_AUTO
---help---
This is a video4linux driver for the 'dpc7146 demonstration
board' by Philips-Semiconductors. It's the reference design
for SAA7146 bases boards, so if you have some unsupported
saa7146 based, analog video card, chances are good that it
will work with this skeleton driver.
To compile this driver as a module, choose M here: the
module will be called dpc7146.
config VIDEO_HEXIUM_ORION
tristate "Hexium HV-PCI6 and Orion frame grabber"
depends on PCI && VIDEO_V4L2 && I2C
select VIDEO_SAA7146_VV
---help---
This is a video4linux driver for the Hexium HV-PCI6 and
Orion frame grabber cards by Hexium.
To compile this driver as a module, choose M here: the
module will be called hexium_orion.
config VIDEO_HEXIUM_GEMINI
tristate "Hexium Gemini frame grabber"
depends on PCI && VIDEO_V4L2 && I2C
select VIDEO_SAA7146_VV
---help---
This is a video4linux driver for the Hexium Gemini frame
grabber card by Hexium. Please note that the Gemini Dual
card is *not* fully supported.
To compile this driver as a module, choose M here: the
module will be called hexium_gemini.
source "drivers/media/video/cx88/Kconfig"
source "drivers/media/video/cx23885/Kconfig"
source "drivers/media/video/ivtv/Kconfig"
config VIDEO_M32R_AR
tristate "AR devices"
depends on M32R && VIDEO_V4L1
---help---
This is a video4linux driver for the Renesas AR (Artificial Retina)
camera module.
config VIDEO_M32R_AR_M64278
tristate "AR device with color module M64278(VGA)"
depends on PLAT_M32700UT
select VIDEO_M32R_AR
---help---
This is a video4linux driver for the Renesas AR (Artificial
Retina) with M64278E-800 camera module.
This module supports VGA(640x480 pixels) resolutions.
To compile this driver as a module, choose M here: the
module will be called arv.
config VIDEO_CAFE_CCIC
tristate "Marvell 88ALP01 (Cafe) CMOS Camera Controller support"
depends on PCI && I2C && VIDEO_V4L2
select VIDEO_OV7670
---help---
This is a video4linux2 driver for the Marvell 88ALP01 integrated
CMOS camera controller. This is the controller found on first-
generation OLPC systems.
#
# USB Multimedia device configuration
#
menuconfig V4L_USB_DRIVERS
bool "V4L USB devices"
depends on USB
default y
if V4L_USB_DRIVERS && USB
source "drivers/media/video/pvrusb2/Kconfig"
source "drivers/media/video/em28xx/Kconfig"
source "drivers/media/video/usbvision/Kconfig"
source "drivers/media/video/usbvideo/Kconfig"
source "drivers/media/video/et61x251/Kconfig"
config VIDEO_OVCAMCHIP
tristate "OmniVision Camera Chip support"
depends on I2C && VIDEO_V4L1
---help---
Support for the OmniVision OV6xxx and OV7xxx series of camera chips.
This driver is intended to be used with the ov511 and w9968cf USB
camera drivers.
To compile this driver as a module, choose M here: the
module will be called ovcamchip.
config USB_W9968CF
tristate "USB W996[87]CF JPEG Dual Mode Camera support"
depends on VIDEO_V4L1 && I2C
select VIDEO_OVCAMCHIP
---help---
Say Y here if you want support for cameras based on OV681 or
Winbond W9967CF/W9968CF JPEG USB Dual Mode Camera Chips.
This driver has an optional plugin, which is distributed as a
separate module only (released under GPL). It allows to use higher
resolutions and framerates, but cannot be included in the official
Linux kernel for performance purposes.
See <file:Documentation/video4linux/w9968cf.txt> for more info.
To compile this driver as a module, choose M here: the
module will be called w9968cf.
config USB_OV511
tristate "USB OV511 Camera support"
depends on VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/ov511.txt>
for more information and for a list of supported cameras.
To compile this driver as a module, choose M here: the
module will be called ov511.
config USB_SE401
tristate "USB SE401 Camera support"
depends on VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. See <file:Documentation/video4linux/se401.txt>
for more information and for a list of supported cameras.
To compile this driver as a module, choose M here: the
module will be called se401.
source "drivers/media/video/sn9c102/Kconfig"
config USB_STV680
tristate "USB STV680 (Pencam) Camera support"
depends on VIDEO_V4L1
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port. This includes the Pencam line of cameras.
See <file:Documentation/video4linux/stv680.txt> for more information
and for a list of supported cameras.
To compile this driver as a module, choose M here: the
module will be called stv680.
source "drivers/media/video/zc0301/Kconfig"
source "drivers/media/video/pwc/Kconfig"
config USB_ZR364XX
tristate "USB ZR364XX Camera support"
depends on VIDEO_V4L2
---help---
Say Y here if you want to connect this type of camera to your
computer's USB port.
See <file:Documentation/video4linux/zr364xx.txt> for more info
and list of supported cameras.
To compile this driver as a module, choose M here: the
module will be called zr364xx.
endif # V4L_USB_DRIVERS
endif # VIDEO_CAPTURE_DRIVERS