arch/ppc/syslib/open_pic2.c - maze/linux - Git at Google

 /*
  *  Copyright (C) 1997 Geert Uytterhoeven
  *
  *  This file is subject to the terms and conditions of the GNU General Public
  *  License.  See the file COPYING in the main directory of this archive
  *  for more details.
  *
  *  This is a duplicate of open_pic.c that deals with U3s MPIC on
  *  G5 PowerMacs. It's the same file except it's using big endian
  *  register accesses
  */

 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 #include <linux/errno.h>
 #include <asm/ptrace.h>
 #include <asm/signal.h>
 #include <asm/io.h>
 #include <asm/irq.h>
 #include <asm/sections.h>
 #include <asm/open_pic.h>
 #include <asm/i8259.h>
 #include <asm/machdep.h>

 #include "open_pic_defs.h"

 void *OpenPIC2_Addr;
 static volatile struct OpenPIC *OpenPIC2 = NULL;
 /*
  * We define OpenPIC_InitSenses table thusly:
  * bit 0x1: sense, 0 for edge and 1 for level.
  * bit 0x2: polarity, 0 for negative, 1 for positive.
  */
 extern  u_int OpenPIC_NumInitSenses;
 extern u_char *OpenPIC_InitSenses;
 extern int use_of_interrupt_tree;

 static u_int NumProcessors;
 static u_int NumSources;
 static int open_pic2_irq_offset;
 static volatile OpenPIC_Source *ISR[NR_IRQS];

 /* Global Operations */
 static void openpic2_disable_8259_pass_through(void);
 static void openpic2_set_priority(u_int pri);
 static void openpic2_set_spurious(u_int vector);

 /* Timer Interrupts */
 static void openpic2_inittimer(u_int timer, u_int pri, u_int vector);
 static void openpic2_maptimer(u_int timer, u_int cpumask);

 /* Interrupt Sources */
 static void openpic2_enable_irq(u_int irq);
 static void openpic2_disable_irq(u_int irq);
 static void openpic2_initirq(u_int irq, u_int pri, u_int vector, int polarity,
 			    int is_level);
 static void openpic2_mapirq(u_int irq, u_int cpumask, u_int keepmask);

 /*
  * These functions are not used but the code is kept here
  * for completeness and future reference.
  */
 static void openpic2_reset(void);
 #ifdef notused
 static void openpic2_enable_8259_pass_through(void);
 static u_int openpic2_get_priority(void);
 static u_int openpic2_get_spurious(void);
 static void openpic2_set_sense(u_int irq, int sense);
 #endif /* notused */

 /*
  * Description of the openpic for the higher-level irq code
  */
 static void openpic2_end_irq(unsigned int irq_nr);
 static void openpic2_ack_irq(unsigned int irq_nr);

 struct hw_interrupt_type open_pic2 = {
 	.typename = " OpenPIC2 ",
 	.enable = openpic2_enable_irq,
 	.disable = openpic2_disable_irq,
 	.ack = openpic2_ack_irq,
 	.end = openpic2_end_irq,
 };

 /*
  *  Accesses to the current processor's openpic registers
  *  On cascaded controller, this is only CPU 0
  */
 #define THIS_CPU		Processor[0]
 #define DECL_THIS_CPU
 #define CHECK_THIS_CPU

 #if 1
 #define check_arg_ipi(ipi) \
     if (ipi < 0 || ipi >= OPENPIC_NUM_IPI) \
 	printk("open_pic.c:%d: illegal ipi %d\n", __LINE__, ipi);
 #define check_arg_timer(timer) \
     if (timer < 0 || timer >= OPENPIC_NUM_TIMERS) \
 	printk("open_pic.c:%d: illegal timer %d\n", __LINE__, timer);
 #define check_arg_vec(vec) \
     if (vec < 0 || vec >= OPENPIC_NUM_VECTORS) \
 	printk("open_pic.c:%d: illegal vector %d\n", __LINE__, vec);
 #define check_arg_pri(pri) \
     if (pri < 0 || pri >= OPENPIC_NUM_PRI) \
 	printk("open_pic.c:%d: illegal priority %d\n", __LINE__, pri);
 /*
  * Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
  * data has probably been corrupted and we're going to panic or deadlock later
  * anyway --Troy
  */
 extern unsigned long* _get_SP(void);
 #define check_arg_irq(irq) \
     if (irq < open_pic2_irq_offset || irq >= NumSources+open_pic2_irq_offset \
 	|| ISR[irq - open_pic2_irq_offset] == 0) { \
       printk("open_pic.c:%d: illegal irq %d\n", __LINE__, irq); \
       /*print_backtrace(_get_SP());*/ }
 #define check_arg_cpu(cpu) \
     if (cpu < 0 || cpu >= NumProcessors){ \
 	printk("open_pic2.c:%d: illegal cpu %d\n", __LINE__, cpu); \
 	/*print_backtrace(_get_SP());*/ }
 #else
 #define check_arg_ipi(ipi)	do {} while (0)
 #define check_arg_timer(timer)	do {} while (0)
 #define check_arg_vec(vec)	do {} while (0)
 #define check_arg_pri(pri)	do {} while (0)
 #define check_arg_irq(irq)	do {} while (0)
 #define check_arg_cpu(cpu)	do {} while (0)
 #endif

 static u_int openpic2_read(volatile u_int *addr)
 {
 	u_int val;

 	val = in_be32(addr);
 	return val;
 }

 static inline void openpic2_write(volatile u_int *addr, u_int val)
 {
 	out_be32(addr, val);
 }

 static inline u_int openpic2_readfield(volatile u_int *addr, u_int mask)
 {
 	u_int val = openpic2_read(addr);
 	return val & mask;
 }

 inline void openpic2_writefield(volatile u_int *addr, u_int mask,
 			       u_int field)
 {
 	u_int val = openpic2_read(addr);
 	openpic2_write(addr, (val & ~mask) | (field & mask));
 }

 static inline void openpic2_clearfield(volatile u_int *addr, u_int mask)
 {
 	openpic2_writefield(addr, mask, 0);
 }

 static inline void openpic2_setfield(volatile u_int *addr, u_int mask)
 {
 	openpic2_writefield(addr, mask, mask);
 }

 static void openpic2_safe_writefield(volatile u_int *addr, u_int mask,
 				    u_int field)
 {
 	openpic2_setfield(addr, OPENPIC_MASK);
 	while (openpic2_read(addr) & OPENPIC_ACTIVITY);
 	openpic2_writefield(addr, mask | OPENPIC_MASK, field | OPENPIC_MASK);
 }

 static void openpic2_reset(void)
 {
 	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
 			 OPENPIC_CONFIG_RESET);
 	while (openpic2_readfield(&OpenPIC2->Global.Global_Configuration0,
 				 OPENPIC_CONFIG_RESET))
 		mb();
 }

 void __init openpic2_set_sources(int first_irq, int num_irqs, void *first_ISR)
 {
 	volatile OpenPIC_Source *src = first_ISR;
 	int i, last_irq;

 	last_irq = first_irq + num_irqs;
 	if (last_irq > NumSources)
 		NumSources = last_irq;
 	if (src == 0)
 		src = &((struct OpenPIC *)OpenPIC2_Addr)->Source[first_irq];
 	for (i = first_irq; i < last_irq; ++i, ++src)
 		ISR[i] = src;
 }

 /*
  * The `offset' parameter defines where the interrupts handled by the
  * OpenPIC start in the space of interrupt numbers that the kernel knows
  * about.  In other words, the OpenPIC's IRQ0 is numbered `offset' in the
  * kernel's interrupt numbering scheme.
  * We assume there is only one OpenPIC.
  */
 void __init openpic2_init(int offset)
 {
 	u_int t, i;
 	u_int timerfreq;
 	const char *version;

 	if (!OpenPIC2_Addr) {
 		printk("No OpenPIC2 found !\n");
 		return;
 	}
 	OpenPIC2 = (volatile struct OpenPIC *)OpenPIC2_Addr;

 	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);

 	t = openpic2_read(&OpenPIC2->Global.Feature_Reporting0);
 	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
 	case 1:
 		version = "1.0";
 		break;
 	case 2:
 		version = "1.2";
 		break;
 	case 3:
 		version = "1.3";
 		break;
 	default:
 		version = "?";
 		break;
 	}
 	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
 			 OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
 	if (NumSources == 0)
 		openpic2_set_sources(0,
 				    ((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
 				     OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
 				    NULL);
 	printk("OpenPIC (2) Version %s (%d CPUs and %d IRQ sources) at %p\n",
 	       version, NumProcessors, NumSources, OpenPIC2);
 	timerfreq = openpic2_read(&OpenPIC2->Global.Timer_Frequency);
 	if (timerfreq)
 		printk("OpenPIC timer frequency is %d.%06d MHz\n",
 		       timerfreq / 1000000, timerfreq % 1000000);

 	open_pic2_irq_offset = offset;

 	/* Initialize timer interrupts */
 	if ( ppc_md.progress ) ppc_md.progress("openpic2: timer",0x3ba);
 	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
 		/* Disabled, Priority 0 */
 		openpic2_inittimer(i, 0, OPENPIC2_VEC_TIMER+i+offset);
 		/* No processor */
 		openpic2_maptimer(i, 0);
 	}

 	/* Initialize external interrupts */
 	if (ppc_md.progress) ppc_md.progress("openpic2: external",0x3bc);

 	openpic2_set_priority(0xf);

 	/* Init all external sources, including possibly the cascade. */
 	for (i = 0; i < NumSources; i++) {
 		int sense;

 		if (ISR[i] == 0)
 			continue;

 		/* the bootloader may have left it enabled (bad !) */
 		openpic2_disable_irq(i+offset);

 		sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
 				(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE);

 		if (sense & IRQ_SENSE_MASK)
 			irq_desc[i+offset].status = IRQ_LEVEL;

 		/* Enabled, Priority 8 */
 		openpic2_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
 				(sense & IRQ_SENSE_MASK));
 		/* Processor 0 */
 		openpic2_mapirq(i, 1<<0, 0);
 	}

 	/* Init descriptors */
 	for (i = offset; i < NumSources + offset; i++)
 		irq_desc[i].chip = &open_pic2;

 	/* Initialize the spurious interrupt */
 	if (ppc_md.progress) ppc_md.progress("openpic2: spurious",0x3bd);
 	openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+offset);

 	openpic2_disable_8259_pass_through();
 	openpic2_set_priority(0);

 	if (ppc_md.progress) ppc_md.progress("openpic2: exit",0x222);
 }

 #ifdef notused
 static void openpic2_enable_8259_pass_through(void)
 {
 	openpic2_clearfield(&OpenPIC2->Global.Global_Configuration0,
 			   OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
 }
 #endif /* notused */

 /* This can't be __init, it is used in openpic_sleep_restore_intrs */
 static void openpic2_disable_8259_pass_through(void)
 {
 	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
 			 OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
 }

 /*
  *  Find out the current interrupt
  */
 u_int openpic2_irq(void)
 {
 	u_int vec;
 	DECL_THIS_CPU;

 	CHECK_THIS_CPU;
 	vec = openpic2_readfield(&OpenPIC2->THIS_CPU.Interrupt_Acknowledge,
 				OPENPIC_VECTOR_MASK);
 	return vec;
 }

 void openpic2_eoi(void)
 {
 	DECL_THIS_CPU;

 	CHECK_THIS_CPU;
 	openpic2_write(&OpenPIC2->THIS_CPU.EOI, 0);
 	/* Handle PCI write posting */
 	(void)openpic2_read(&OpenPIC2->THIS_CPU.EOI);
 }

 #ifdef notused
 static u_int openpic2_get_priority(void)
 {
 	DECL_THIS_CPU;

 	CHECK_THIS_CPU;
 	return openpic2_readfield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
 				 OPENPIC_CURRENT_TASK_PRIORITY_MASK);
 }
 #endif /* notused */

 static void __init openpic2_set_priority(u_int pri)
 {
 	DECL_THIS_CPU;

 	CHECK_THIS_CPU;
 	check_arg_pri(pri);
 	openpic2_writefield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
 			   OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
 }

 /*
  *  Get/set the spurious vector
  */
 #ifdef notused
 static u_int openpic2_get_spurious(void)
 {
 	return openpic2_readfield(&OpenPIC2->Global.Spurious_Vector,
 				 OPENPIC_VECTOR_MASK);
 }
 #endif /* notused */

 /* This can't be __init, it is used in openpic_sleep_restore_intrs */
 static void openpic2_set_spurious(u_int vec)
 {
 	check_arg_vec(vec);
 	openpic2_writefield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
 			   vec);
 }

 static DEFINE_SPINLOCK(openpic2_setup_lock);

 /*
  *  Initialize a timer interrupt (and disable it)
  *
  *  timer: OpenPIC timer number
  *  pri: interrupt source priority
  *  vec: the vector it will produce
  */
 static void __init openpic2_inittimer(u_int timer, u_int pri, u_int vec)
 {
 	check_arg_timer(timer);
 	check_arg_pri(pri);
 	check_arg_vec(vec);
 	openpic2_safe_writefield(&OpenPIC2->Global.Timer[timer].Vector_Priority,
 				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK,
 				(pri << OPENPIC_PRIORITY_SHIFT) | vec);
 }

 /*
  *  Map a timer interrupt to one or more CPUs
  */
 static void __init openpic2_maptimer(u_int timer, u_int cpumask)
 {
 	check_arg_timer(timer);
 	openpic2_write(&OpenPIC2->Global.Timer[timer].Destination,
 		      cpumask);
 }

 /*
  * Initalize the interrupt source which will generate an NMI.
  * This raises the interrupt's priority from 8 to 9.
  *
  * irq: The logical IRQ which generates an NMI.
  */
 void __init
 openpic2_init_nmi_irq(u_int irq)
 {
 	check_arg_irq(irq);
 	openpic2_safe_writefield(&ISR[irq - open_pic2_irq_offset]->Vector_Priority,
 				OPENPIC_PRIORITY_MASK,
 				9 << OPENPIC_PRIORITY_SHIFT);
 }

 /*
  *
  * All functions below take an offset'ed irq argument
  *
  */


 /*
  *  Enable/disable an external interrupt source
  *
  *  Externally called, irq is an offseted system-wide interrupt number
  */
 static void openpic2_enable_irq(u_int irq)
 {
 	volatile u_int *vpp;

 	check_arg_irq(irq);
 	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
        	openpic2_clearfield(vpp, OPENPIC_MASK);
 	/* make sure mask gets to controller before we return to user */
        	do {
        		mb(); /* sync is probably useless here */
        	} while (openpic2_readfield(vpp, OPENPIC_MASK));
 }

 static void openpic2_disable_irq(u_int irq)
 {
 	volatile u_int *vpp;
 	u32 vp;

 	check_arg_irq(irq);
 	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
 	openpic2_setfield(vpp, OPENPIC_MASK);
 	/* make sure mask gets to controller before we return to user */
 	do {
 		mb();  /* sync is probably useless here */
 		vp = openpic2_readfield(vpp, OPENPIC_MASK | OPENPIC_ACTIVITY);
 	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
 }


 /*
  *  Initialize an interrupt source (and disable it!)
  *
  *  irq: OpenPIC interrupt number
  *  pri: interrupt source priority
  *  vec: the vector it will produce
  *  pol: polarity (1 for positive, 0 for negative)
  *  sense: 1 for level, 0 for edge
  */
 static void __init
 openpic2_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
 {
 	openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
 				OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
 				OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK,
 				(pri << OPENPIC_PRIORITY_SHIFT) | vec |
 				(pol ? OPENPIC_POLARITY_POSITIVE :
 			    		OPENPIC_POLARITY_NEGATIVE) |
 				(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
 }

 /*
  *  Map an interrupt source to one or more CPUs
  */
 static void openpic2_mapirq(u_int irq, u_int physmask, u_int keepmask)
 {
 	if (ISR[irq] == 0)
 		return;
 	if (keepmask != 0)
 		physmask |= openpic2_read(&ISR[irq]->Destination) & keepmask;
 	openpic2_write(&ISR[irq]->Destination, physmask);
 }

 #ifdef notused
 /*
  *  Set the sense for an interrupt source (and disable it!)
  *
  *  sense: 1 for level, 0 for edge
  */
 static void openpic2_set_sense(u_int irq, int sense)
 {
 	if (ISR[irq] != 0)
 		openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
 					OPENPIC_SENSE_LEVEL,
 					(sense ? OPENPIC_SENSE_LEVEL : 0));
 }
 #endif /* notused */

 /* No spinlocks, should not be necessary with the OpenPIC
  * (1 register = 1 interrupt and we have the desc lock).
  */
 static void openpic2_ack_irq(unsigned int irq_nr)
 {
 	openpic2_disable_irq(irq_nr);
 	openpic2_eoi();
 }

 static void openpic2_end_irq(unsigned int irq_nr)
 {
 	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
 		openpic2_enable_irq(irq_nr);
 }

 int
 openpic2_get_irq(void)
 {
 	int irq = openpic2_irq();

 	if (irq == (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset))
 		irq = -1;
 	return irq;
 }

 #ifdef CONFIG_PM

 /*
  * We implement the IRQ controller as a sysdev and put it
  * to sleep at powerdown stage (the callback is named suspend,
  * but it's old semantics, for the Device Model, it's really
  * powerdown). The possible problem is that another sysdev that
  * happens to be suspend after this one will have interrupts off,
  * that may be an issue... For now, this isn't an issue on pmac
  * though...
  */

 static u32 save_ipi_vp[OPENPIC_NUM_IPI];
 static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
 static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
 static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
 static int openpic_suspend_count;

 static void openpic2_cached_enable_irq(u_int irq)
 {
 	check_arg_irq(irq);
 	save_irq_src_vp[irq - open_pic2_irq_offset] &= ~OPENPIC_MASK;
 }

 static void openpic2_cached_disable_irq(u_int irq)
 {
 	check_arg_irq(irq);
 	save_irq_src_vp[irq - open_pic2_irq_offset] |= OPENPIC_MASK;
 }

 /* WARNING: Can be called directly by the cpufreq code with NULL parameter,
  * we need something better to deal with that... Maybe switch to S1 for
  * cpufreq changes
  */
 int openpic2_suspend(struct sys_device *sysdev, pm_message_t state)
 {
 	int	i;
 	unsigned long flags;

 	spin_lock_irqsave(&openpic2_setup_lock, flags);

 	if (openpic_suspend_count++ > 0) {
 		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
 		return 0;
 	}

 	open_pic2.enable = openpic2_cached_enable_irq;
 	open_pic2.disable = openpic2_cached_disable_irq;

 	for (i=0; i<NumProcessors; i++) {
 		save_cpu_task_pri[i] = openpic2_read(&OpenPIC2->Processor[i].Current_Task_Priority);
 		openpic2_writefield(&OpenPIC2->Processor[i].Current_Task_Priority,
 				   OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
 	}

 	for (i=0; i<OPENPIC_NUM_IPI; i++)
 		save_ipi_vp[i] = openpic2_read(&OpenPIC2->Global.IPI_Vector_Priority(i));
 	for (i=0; i<NumSources; i++) {
 		if (ISR[i] == 0)
 			continue;
 		save_irq_src_vp[i] = openpic2_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
 		save_irq_src_dest[i] = openpic2_read(&ISR[i]->Destination);
 	}

 	spin_unlock_irqrestore(&openpic2_setup_lock, flags);

 	return 0;
 }

 /* WARNING: Can be called directly by the cpufreq code with NULL parameter,
  * we need something better to deal with that... Maybe switch to S1 for
  * cpufreq changes
  */
 int openpic2_resume(struct sys_device *sysdev)
 {
 	int		i;
 	unsigned long	flags;
 	u32		vppmask =	OPENPIC_PRIORITY_MASK | OPENPIC_VECTOR_MASK |
 					OPENPIC_SENSE_MASK | OPENPIC_POLARITY_MASK |
 					OPENPIC_MASK;

 	spin_lock_irqsave(&openpic2_setup_lock, flags);

 	if ((--openpic_suspend_count) > 0) {
 		spin_unlock_irqrestore(&openpic2_setup_lock, flags);
 		return 0;
 	}

 	openpic2_reset();

 	/* OpenPIC sometimes seem to need some time to be fully back up... */
 	do {
 		openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+open_pic2_irq_offset);
 	} while(openpic2_readfield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
 			!= (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset));

 	openpic2_disable_8259_pass_through();

 	for (i=0; i<OPENPIC_NUM_IPI; i++)
 		openpic2_write(&OpenPIC2->Global.IPI_Vector_Priority(i),
 			      save_ipi_vp[i]);
 	for (i=0; i<NumSources; i++) {
 		if (ISR[i] == 0)
 			continue;
 		openpic2_write(&ISR[i]->Destination, save_irq_src_dest[i]);
 		openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
 		/* make sure mask gets to controller before we return to user */
 		do {
 			openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
 		} while (openpic2_readfield(&ISR[i]->Vector_Priority, vppmask)
 			 != (save_irq_src_vp[i] & vppmask));
 	}
 	for (i=0; i<NumProcessors; i++)
 		openpic2_write(&OpenPIC2->Processor[i].Current_Task_Priority,
 			      save_cpu_task_pri[i]);

 	open_pic2.enable = openpic2_enable_irq;
 	open_pic2.disable = openpic2_disable_irq;

 	spin_unlock_irqrestore(&openpic2_setup_lock, flags);

 	return 0;
 }

 #endif /* CONFIG_PM */

 /* HACK ALERT */
 static struct sysdev_class openpic2_sysclass = {
 	set_kset_name("openpic2"),
 };

 static struct sys_device device_openpic2 = {
 	.id		= 0,
 	.cls		= &openpic2_sysclass,
 };

 static struct sysdev_driver driver_openpic2 = {
 #ifdef CONFIG_PM
 	.suspend	= &openpic2_suspend,
 	.resume		= &openpic2_resume,
 #endif /* CONFIG_PM */
 };

 static int __init init_openpic2_sysfs(void)
 {
 	int rc;

 	if (!OpenPIC2_Addr)
 		return -ENODEV;
 	printk(KERN_DEBUG "Registering openpic2 with sysfs...\n");
 	rc = sysdev_class_register(&openpic2_sysclass);
 	if (rc) {
 		printk(KERN_ERR "Failed registering openpic sys class\n");
 		return -ENODEV;
 	}
 	rc = sysdev_register(&device_openpic2);
 	if (rc) {
 		printk(KERN_ERR "Failed registering openpic sys device\n");
 		return -ENODEV;
 	}
 	rc = sysdev_driver_register(&openpic2_sysclass, &driver_openpic2);
 	if (rc) {
 		printk(KERN_ERR "Failed registering openpic sys driver\n");
 		return -ENODEV;
 	}
 	return 0;
 }

 subsys_initcall(init_openpic2_sysfs);
	/*
	* Copyright (C) 1997 Geert Uytterhoeven
	*
	* This file is subject to the terms and conditions of the GNU General Public
	* License. See the file COPYING in the main directory of this archive
	* for more details.
	*
	* This is a duplicate of open_pic.c that deals with U3s MPIC on
	* G5 PowerMacs. It's the same file except it's using big endian
	* register accesses
	*/

	#include <linux/types.h>
	#include <linux/kernel.h>
	#include <linux/sched.h>
	#include <linux/init.h>
	#include <linux/interrupt.h>
	#include <linux/sysdev.h>
	#include <linux/errno.h>
	#include <asm/ptrace.h>
	#include <asm/signal.h>
	#include <asm/io.h>
	#include <asm/irq.h>
	#include <asm/sections.h>
	#include <asm/open_pic.h>
	#include <asm/i8259.h>
	#include <asm/machdep.h>

	#include "open_pic_defs.h"

	void *OpenPIC2_Addr;
	static volatile struct OpenPIC *OpenPIC2 = NULL;
	/*
	* We define OpenPIC_InitSenses table thusly:
	* bit 0x1: sense, 0 for edge and 1 for level.
	* bit 0x2: polarity, 0 for negative, 1 for positive.
	*/
	extern u_int OpenPIC_NumInitSenses;
	extern u_char *OpenPIC_InitSenses;
	extern int use_of_interrupt_tree;

	static u_int NumProcessors;
	static u_int NumSources;
	static int open_pic2_irq_offset;
	static volatile OpenPIC_Source *ISR[NR_IRQS];

	/* Global Operations */
	static void openpic2_disable_8259_pass_through(void);
	static void openpic2_set_priority(u_int pri);
	static void openpic2_set_spurious(u_int vector);

	/* Timer Interrupts */
	static void openpic2_inittimer(u_int timer, u_int pri, u_int vector);
	static void openpic2_maptimer(u_int timer, u_int cpumask);

	/* Interrupt Sources */
	static void openpic2_enable_irq(u_int irq);
	static void openpic2_disable_irq(u_int irq);
	static void openpic2_initirq(u_int irq, u_int pri, u_int vector, int polarity,
	int is_level);
	static void openpic2_mapirq(u_int irq, u_int cpumask, u_int keepmask);

	/*
	* These functions are not used but the code is kept here
	* for completeness and future reference.
	*/
	static void openpic2_reset(void);
	#ifdef notused
	static void openpic2_enable_8259_pass_through(void);
	static u_int openpic2_get_priority(void);
	static u_int openpic2_get_spurious(void);
	static void openpic2_set_sense(u_int irq, int sense);
	#endif /* notused */

	/*
	* Description of the openpic for the higher-level irq code
	*/
	static void openpic2_end_irq(unsigned int irq_nr);
	static void openpic2_ack_irq(unsigned int irq_nr);

	struct hw_interrupt_type open_pic2 = {
	.typename = " OpenPIC2 ",
	.enable = openpic2_enable_irq,
	.disable = openpic2_disable_irq,
	.ack = openpic2_ack_irq,
	.end = openpic2_end_irq,
	};

	/*
	* Accesses to the current processor's openpic registers
	* On cascaded controller, this is only CPU 0
	*/
	#define THIS_CPU Processor[0]
	#define DECL_THIS_CPU
	#define CHECK_THIS_CPU

	#if 1
	#define check_arg_ipi(ipi) \
	if (ipi < 0 \|\| ipi >= OPENPIC_NUM_IPI) \
	printk("open_pic.c:%d: illegal ipi %d\n", __LINE__, ipi);
	#define check_arg_timer(timer) \
	if (timer < 0 \|\| timer >= OPENPIC_NUM_TIMERS) \
	printk("open_pic.c:%d: illegal timer %d\n", __LINE__, timer);
	#define check_arg_vec(vec) \
	if (vec < 0 \|\| vec >= OPENPIC_NUM_VECTORS) \
	printk("open_pic.c:%d: illegal vector %d\n", __LINE__, vec);
	#define check_arg_pri(pri) \
	if (pri < 0 \|\| pri >= OPENPIC_NUM_PRI) \
	printk("open_pic.c:%d: illegal priority %d\n", __LINE__, pri);
	/*
	* Print out a backtrace if it's out of range, since if it's larger than NR_IRQ's
	* data has probably been corrupted and we're going to panic or deadlock later
	* anyway --Troy
	*/
	extern unsigned long* _get_SP(void);
	#define check_arg_irq(irq) \
	if (irq < open_pic2_irq_offset \|\| irq >= NumSources+open_pic2_irq_offset \
	\|\| ISR[irq - open_pic2_irq_offset] == 0) { \
	printk("open_pic.c:%d: illegal irq %d\n", __LINE__, irq); \
	/print_backtrace(_get_SP());/ }
	#define check_arg_cpu(cpu) \
	if (cpu < 0 \|\| cpu >= NumProcessors){ \
	printk("open_pic2.c:%d: illegal cpu %d\n", __LINE__, cpu); \
	/print_backtrace(_get_SP());/ }
	#else
	#define check_arg_ipi(ipi) do {} while (0)
	#define check_arg_timer(timer) do {} while (0)
	#define check_arg_vec(vec) do {} while (0)
	#define check_arg_pri(pri) do {} while (0)
	#define check_arg_irq(irq) do {} while (0)
	#define check_arg_cpu(cpu) do {} while (0)
	#endif

	static u_int openpic2_read(volatile u_int *addr)
	{
	u_int val;

	val = in_be32(addr);
	return val;
	}

	static inline void openpic2_write(volatile u_int *addr, u_int val)
	{
	out_be32(addr, val);
	}

	static inline u_int openpic2_readfield(volatile u_int *addr, u_int mask)
	{
	u_int val = openpic2_read(addr);
	return val & mask;
	}

	inline void openpic2_writefield(volatile u_int *addr, u_int mask,
	u_int field)
	{
	u_int val = openpic2_read(addr);
	openpic2_write(addr, (val & ~mask) \| (field & mask));
	}

	static inline void openpic2_clearfield(volatile u_int *addr, u_int mask)
	{
	openpic2_writefield(addr, mask, 0);
	}

	static inline void openpic2_setfield(volatile u_int *addr, u_int mask)
	{
	openpic2_writefield(addr, mask, mask);
	}

	static void openpic2_safe_writefield(volatile u_int *addr, u_int mask,
	u_int field)
	{
	openpic2_setfield(addr, OPENPIC_MASK);
	while (openpic2_read(addr) & OPENPIC_ACTIVITY);
	openpic2_writefield(addr, mask \| OPENPIC_MASK, field \| OPENPIC_MASK);
	}

	static void openpic2_reset(void)
	{
	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
	OPENPIC_CONFIG_RESET);
	while (openpic2_readfield(&OpenPIC2->Global.Global_Configuration0,
	OPENPIC_CONFIG_RESET))
	mb();
	}

	void __init openpic2_set_sources(int first_irq, int num_irqs, void *first_ISR)
	{
	volatile OpenPIC_Source *src = first_ISR;
	int i, last_irq;

	last_irq = first_irq + num_irqs;
	if (last_irq > NumSources)
	NumSources = last_irq;
	if (src == 0)
	src = &((struct OpenPIC *)OpenPIC2_Addr)->Source[first_irq];
	for (i = first_irq; i < last_irq; ++i, ++src)
	ISR[i] = src;
	}

	/*
	* The `offset' parameter defines where the interrupts handled by the
	* OpenPIC start in the space of interrupt numbers that the kernel knows
	* about. In other words, the OpenPIC's IRQ0 is numbered `offset' in the
	* kernel's interrupt numbering scheme.
	* We assume there is only one OpenPIC.
	*/
	void __init openpic2_init(int offset)
	{
	u_int t, i;
	u_int timerfreq;
	const char *version;

	if (!OpenPIC2_Addr) {
	printk("No OpenPIC2 found !\n");
	return;
	}
	OpenPIC2 = (volatile struct OpenPIC *)OpenPIC2_Addr;

	if (ppc_md.progress) ppc_md.progress("openpic: enter", 0x122);

	t = openpic2_read(&OpenPIC2->Global.Feature_Reporting0);
	switch (t & OPENPIC_FEATURE_VERSION_MASK) {
	case 1:
	version = "1.0";
	break;
	case 2:
	version = "1.2";
	break;
	case 3:
	version = "1.3";
	break;
	default:
	version = "?";
	break;
	}
	NumProcessors = ((t & OPENPIC_FEATURE_LAST_PROCESSOR_MASK) >>
	OPENPIC_FEATURE_LAST_PROCESSOR_SHIFT) + 1;
	if (NumSources == 0)
	openpic2_set_sources(0,
	((t & OPENPIC_FEATURE_LAST_SOURCE_MASK) >>
	OPENPIC_FEATURE_LAST_SOURCE_SHIFT) + 1,
	NULL);
	printk("OpenPIC (2) Version %s (%d CPUs and %d IRQ sources) at %p\n",
	version, NumProcessors, NumSources, OpenPIC2);
	timerfreq = openpic2_read(&OpenPIC2->Global.Timer_Frequency);
	if (timerfreq)
	printk("OpenPIC timer frequency is %d.%06d MHz\n",
	timerfreq / 1000000, timerfreq % 1000000);

	open_pic2_irq_offset = offset;

	/* Initialize timer interrupts */
	if ( ppc_md.progress ) ppc_md.progress("openpic2: timer",0x3ba);
	for (i = 0; i < OPENPIC_NUM_TIMERS; i++) {
	/* Disabled, Priority 0 */
	openpic2_inittimer(i, 0, OPENPIC2_VEC_TIMER+i+offset);
	/* No processor */
	openpic2_maptimer(i, 0);
	}

	/* Initialize external interrupts */
	if (ppc_md.progress) ppc_md.progress("openpic2: external",0x3bc);

	openpic2_set_priority(0xf);

	/* Init all external sources, including possibly the cascade. */
	for (i = 0; i < NumSources; i++) {
	int sense;

	if (ISR[i] == 0)
	continue;

	/* the bootloader may have left it enabled (bad !) */
	openpic2_disable_irq(i+offset);

	sense = (i < OpenPIC_NumInitSenses)? OpenPIC_InitSenses[i]: \
	(IRQ_SENSE_LEVEL \| IRQ_POLARITY_NEGATIVE);

	if (sense & IRQ_SENSE_MASK)
	irq_desc[i+offset].status = IRQ_LEVEL;

	/* Enabled, Priority 8 */
	openpic2_initirq(i, 8, i+offset, (sense & IRQ_POLARITY_MASK),
	(sense & IRQ_SENSE_MASK));
	/* Processor 0 */
	openpic2_mapirq(i, 1<<0, 0);
	}

	/* Init descriptors */
	for (i = offset; i < NumSources + offset; i++)
	irq_desc[i].chip = &open_pic2;

	/* Initialize the spurious interrupt */
	if (ppc_md.progress) ppc_md.progress("openpic2: spurious",0x3bd);
	openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+offset);

	openpic2_disable_8259_pass_through();
	openpic2_set_priority(0);

	if (ppc_md.progress) ppc_md.progress("openpic2: exit",0x222);
	}

	#ifdef notused
	static void openpic2_enable_8259_pass_through(void)
	{
	openpic2_clearfield(&OpenPIC2->Global.Global_Configuration0,
	OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
	}
	#endif /* notused */

	/* This can't be __init, it is used in openpic_sleep_restore_intrs */
	static void openpic2_disable_8259_pass_through(void)
	{
	openpic2_setfield(&OpenPIC2->Global.Global_Configuration0,
	OPENPIC_CONFIG_8259_PASSTHROUGH_DISABLE);
	}

	/*
	* Find out the current interrupt
	*/
	u_int openpic2_irq(void)
	{
	u_int vec;
	DECL_THIS_CPU;

	CHECK_THIS_CPU;
	vec = openpic2_readfield(&OpenPIC2->THIS_CPU.Interrupt_Acknowledge,
	OPENPIC_VECTOR_MASK);
	return vec;
	}

	void openpic2_eoi(void)
	{
	DECL_THIS_CPU;

	CHECK_THIS_CPU;
	openpic2_write(&OpenPIC2->THIS_CPU.EOI, 0);
	/* Handle PCI write posting */
	(void)openpic2_read(&OpenPIC2->THIS_CPU.EOI);
	}

	#ifdef notused
	static u_int openpic2_get_priority(void)
	{
	DECL_THIS_CPU;

	CHECK_THIS_CPU;
	return openpic2_readfield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
	OPENPIC_CURRENT_TASK_PRIORITY_MASK);
	}
	#endif /* notused */

	static void __init openpic2_set_priority(u_int pri)
	{
	DECL_THIS_CPU;

	CHECK_THIS_CPU;
	check_arg_pri(pri);
	openpic2_writefield(&OpenPIC2->THIS_CPU.Current_Task_Priority,
	OPENPIC_CURRENT_TASK_PRIORITY_MASK, pri);
	}

	/*
	* Get/set the spurious vector
	*/
	#ifdef notused
	static u_int openpic2_get_spurious(void)
	{
	return openpic2_readfield(&OpenPIC2->Global.Spurious_Vector,
	OPENPIC_VECTOR_MASK);
	}
	#endif /* notused */

	/* This can't be __init, it is used in openpic_sleep_restore_intrs */
	static void openpic2_set_spurious(u_int vec)
	{
	check_arg_vec(vec);
	openpic2_writefield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK,
	vec);
	}

	static DEFINE_SPINLOCK(openpic2_setup_lock);

	/*
	* Initialize a timer interrupt (and disable it)
	*
	* timer: OpenPIC timer number
	* pri: interrupt source priority
	* vec: the vector it will produce
	*/
	static void __init openpic2_inittimer(u_int timer, u_int pri, u_int vec)
	{
	check_arg_timer(timer);
	check_arg_pri(pri);
	check_arg_vec(vec);
	openpic2_safe_writefield(&OpenPIC2->Global.Timer[timer].Vector_Priority,
	OPENPIC_PRIORITY_MASK \| OPENPIC_VECTOR_MASK,
	(pri << OPENPIC_PRIORITY_SHIFT) \| vec);
	}

	/*
	* Map a timer interrupt to one or more CPUs
	*/
	static void __init openpic2_maptimer(u_int timer, u_int cpumask)
	{
	check_arg_timer(timer);
	openpic2_write(&OpenPIC2->Global.Timer[timer].Destination,
	cpumask);
	}

	/*
	* Initalize the interrupt source which will generate an NMI.
	* This raises the interrupt's priority from 8 to 9.
	*
	* irq: The logical IRQ which generates an NMI.
	*/
	void __init
	openpic2_init_nmi_irq(u_int irq)
	{
	check_arg_irq(irq);
	openpic2_safe_writefield(&ISR[irq - open_pic2_irq_offset]->Vector_Priority,
	OPENPIC_PRIORITY_MASK,
	9 << OPENPIC_PRIORITY_SHIFT);
	}

	/*
	*
	* All functions below take an offset'ed irq argument
	*
	*/


	/*
	* Enable/disable an external interrupt source
	*
	* Externally called, irq is an offseted system-wide interrupt number
	*/
	static void openpic2_enable_irq(u_int irq)
	{
	volatile u_int *vpp;

	check_arg_irq(irq);
	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
	openpic2_clearfield(vpp, OPENPIC_MASK);
	/* make sure mask gets to controller before we return to user */
	do {
	mb(); /* sync is probably useless here */
	} while (openpic2_readfield(vpp, OPENPIC_MASK));
	}

	static void openpic2_disable_irq(u_int irq)
	{
	volatile u_int *vpp;
	u32 vp;

	check_arg_irq(irq);
	vpp = &ISR[irq - open_pic2_irq_offset]->Vector_Priority;
	openpic2_setfield(vpp, OPENPIC_MASK);
	/* make sure mask gets to controller before we return to user */
	do {
	mb(); /* sync is probably useless here */
	vp = openpic2_readfield(vpp, OPENPIC_MASK \| OPENPIC_ACTIVITY);
	} while((vp & OPENPIC_ACTIVITY) && !(vp & OPENPIC_MASK));
	}


	/*
	* Initialize an interrupt source (and disable it!)
	*
	* irq: OpenPIC interrupt number
	* pri: interrupt source priority
	* vec: the vector it will produce
	* pol: polarity (1 for positive, 0 for negative)
	* sense: 1 for level, 0 for edge
	*/
	static void __init
	openpic2_initirq(u_int irq, u_int pri, u_int vec, int pol, int sense)
	{
	openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
	OPENPIC_PRIORITY_MASK \| OPENPIC_VECTOR_MASK \|
	OPENPIC_SENSE_MASK \| OPENPIC_POLARITY_MASK,
	(pri << OPENPIC_PRIORITY_SHIFT) \| vec \|
	(pol ? OPENPIC_POLARITY_POSITIVE :
	OPENPIC_POLARITY_NEGATIVE) \|
	(sense ? OPENPIC_SENSE_LEVEL : OPENPIC_SENSE_EDGE));
	}

	/*
	* Map an interrupt source to one or more CPUs
	*/
	static void openpic2_mapirq(u_int irq, u_int physmask, u_int keepmask)
	{
	if (ISR[irq] == 0)
	return;
	if (keepmask != 0)
	physmask \|= openpic2_read(&ISR[irq]->Destination) & keepmask;
	openpic2_write(&ISR[irq]->Destination, physmask);
	}

	#ifdef notused
	/*
	* Set the sense for an interrupt source (and disable it!)
	*
	* sense: 1 for level, 0 for edge
	*/
	static void openpic2_set_sense(u_int irq, int sense)
	{
	if (ISR[irq] != 0)
	openpic2_safe_writefield(&ISR[irq]->Vector_Priority,
	OPENPIC_SENSE_LEVEL,
	(sense ? OPENPIC_SENSE_LEVEL : 0));
	}
	#endif /* notused */

	/* No spinlocks, should not be necessary with the OpenPIC
	* (1 register = 1 interrupt and we have the desc lock).
	*/
	static void openpic2_ack_irq(unsigned int irq_nr)
	{
	openpic2_disable_irq(irq_nr);
	openpic2_eoi();
	}

	static void openpic2_end_irq(unsigned int irq_nr)
	{
	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED\|IRQ_INPROGRESS)))
	openpic2_enable_irq(irq_nr);
	}

	int
	openpic2_get_irq(void)
	{
	int irq = openpic2_irq();

	if (irq == (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset))
	irq = -1;
	return irq;
	}

	#ifdef CONFIG_PM

	/*
	* We implement the IRQ controller as a sysdev and put it
	* to sleep at powerdown stage (the callback is named suspend,
	* but it's old semantics, for the Device Model, it's really
	* powerdown). The possible problem is that another sysdev that
	* happens to be suspend after this one will have interrupts off,
	* that may be an issue... For now, this isn't an issue on pmac
	* though...
	*/

	static u32 save_ipi_vp[OPENPIC_NUM_IPI];
	static u32 save_irq_src_vp[OPENPIC_MAX_SOURCES];
	static u32 save_irq_src_dest[OPENPIC_MAX_SOURCES];
	static u32 save_cpu_task_pri[OPENPIC_MAX_PROCESSORS];
	static int openpic_suspend_count;

	static void openpic2_cached_enable_irq(u_int irq)
	{
	check_arg_irq(irq);
	save_irq_src_vp[irq - open_pic2_irq_offset] &= ~OPENPIC_MASK;
	}

	static void openpic2_cached_disable_irq(u_int irq)
	{
	check_arg_irq(irq);
	save_irq_src_vp[irq - open_pic2_irq_offset] \|= OPENPIC_MASK;
	}

	/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
	* we need something better to deal with that... Maybe switch to S1 for
	* cpufreq changes
	*/
	int openpic2_suspend(struct sys_device *sysdev, pm_message_t state)
	{
	int i;
	unsigned long flags;

	spin_lock_irqsave(&openpic2_setup_lock, flags);

	if (openpic_suspend_count++ > 0) {
	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
	return 0;
	}

	open_pic2.enable = openpic2_cached_enable_irq;
	open_pic2.disable = openpic2_cached_disable_irq;

	for (i=0; i<NumProcessors; i++) {
	save_cpu_task_pri[i] = openpic2_read(&OpenPIC2->Processor[i].Current_Task_Priority);
	openpic2_writefield(&OpenPIC2->Processor[i].Current_Task_Priority,
	OPENPIC_CURRENT_TASK_PRIORITY_MASK, 0xf);
	}

	for (i=0; i<OPENPIC_NUM_IPI; i++)
	save_ipi_vp[i] = openpic2_read(&OpenPIC2->Global.IPI_Vector_Priority(i));
	for (i=0; i<NumSources; i++) {
	if (ISR[i] == 0)
	continue;
	save_irq_src_vp[i] = openpic2_read(&ISR[i]->Vector_Priority) & ~OPENPIC_ACTIVITY;
	save_irq_src_dest[i] = openpic2_read(&ISR[i]->Destination);
	}

	spin_unlock_irqrestore(&openpic2_setup_lock, flags);

	return 0;
	}

	/* WARNING: Can be called directly by the cpufreq code with NULL parameter,
	* we need something better to deal with that... Maybe switch to S1 for
	* cpufreq changes
	*/
	int openpic2_resume(struct sys_device *sysdev)
	{
	int i;
	unsigned long flags;
	u32 vppmask = OPENPIC_PRIORITY_MASK \| OPENPIC_VECTOR_MASK \|
	OPENPIC_SENSE_MASK \| OPENPIC_POLARITY_MASK \|
	OPENPIC_MASK;

	spin_lock_irqsave(&openpic2_setup_lock, flags);

	if ((--openpic_suspend_count) > 0) {
	spin_unlock_irqrestore(&openpic2_setup_lock, flags);
	return 0;
	}

	openpic2_reset();

	/* OpenPIC sometimes seem to need some time to be fully back up... */
	do {
	openpic2_set_spurious(OPENPIC2_VEC_SPURIOUS+open_pic2_irq_offset);
	} while(openpic2_readfield(&OpenPIC2->Global.Spurious_Vector, OPENPIC_VECTOR_MASK)
	!= (OPENPIC2_VEC_SPURIOUS + open_pic2_irq_offset));

	openpic2_disable_8259_pass_through();

	for (i=0; i<OPENPIC_NUM_IPI; i++)
	openpic2_write(&OpenPIC2->Global.IPI_Vector_Priority(i),
	save_ipi_vp[i]);
	for (i=0; i<NumSources; i++) {
	if (ISR[i] == 0)
	continue;
	openpic2_write(&ISR[i]->Destination, save_irq_src_dest[i]);
	openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
	/* make sure mask gets to controller before we return to user */
	do {
	openpic2_write(&ISR[i]->Vector_Priority, save_irq_src_vp[i]);
	} while (openpic2_readfield(&ISR[i]->Vector_Priority, vppmask)
	!= (save_irq_src_vp[i] & vppmask));
	}
	for (i=0; i<NumProcessors; i++)
	openpic2_write(&OpenPIC2->Processor[i].Current_Task_Priority,
	save_cpu_task_pri[i]);

	open_pic2.enable = openpic2_enable_irq;
	open_pic2.disable = openpic2_disable_irq;

	spin_unlock_irqrestore(&openpic2_setup_lock, flags);

	return 0;
	}

	#endif /* CONFIG_PM */

	/* HACK ALERT */
	static struct sysdev_class openpic2_sysclass = {
	set_kset_name("openpic2"),
	};

	static struct sys_device device_openpic2 = {
	.id = 0,
	.cls = &openpic2_sysclass,
	};

	static struct sysdev_driver driver_openpic2 = {
	#ifdef CONFIG_PM
	.suspend = &openpic2_suspend,
	.resume = &openpic2_resume,
	#endif /* CONFIG_PM */
	};

	static int __init init_openpic2_sysfs(void)
	{
	int rc;

	if (!OpenPIC2_Addr)
	return -ENODEV;
	printk(KERN_DEBUG "Registering openpic2 with sysfs...\n");
	rc = sysdev_class_register(&openpic2_sysclass);
	if (rc) {
	printk(KERN_ERR "Failed registering openpic sys class\n");
	return -ENODEV;
	}
	rc = sysdev_register(&device_openpic2);
	if (rc) {
	printk(KERN_ERR "Failed registering openpic sys device\n");
	return -ENODEV;
	}
	rc = sysdev_driver_register(&openpic2_sysclass, &driver_openpic2);
	if (rc) {
	printk(KERN_ERR "Failed registering openpic sys driver\n");
	return -ENODEV;
	}
	return 0;
	}

	subsys_initcall(init_openpic2_sysfs);