| /* |
| * arch/arm/mach-ixp4xx/common.c |
| * |
| * Generic code shared across all IXP4XX platforms |
| * |
| * Maintainer: Deepak Saxena <dsaxena@plexity.net> |
| * |
| * Copyright 2002 (c) Intel Corporation |
| * Copyright 2003-2004 (c) MontaVista, Software, Inc. |
| * |
| * This file is licensed under the terms of the GNU General Public |
| * License version 2. This program is licensed "as is" without any |
| * warranty of any kind, whether express or implied. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/mm.h> |
| #include <linux/init.h> |
| #include <linux/serial.h> |
| #include <linux/sched.h> |
| #include <linux/tty.h> |
| #include <linux/platform_device.h> |
| #include <linux/serial_core.h> |
| #include <linux/bootmem.h> |
| #include <linux/interrupt.h> |
| #include <linux/bitops.h> |
| #include <linux/time.h> |
| #include <linux/timex.h> |
| #include <linux/clocksource.h> |
| #include <linux/clockchips.h> |
| |
| #include <asm/arch/udc.h> |
| #include <asm/hardware.h> |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| #include <asm/pgtable.h> |
| #include <asm/page.h> |
| #include <asm/irq.h> |
| |
| #include <asm/mach/map.h> |
| #include <asm/mach/irq.h> |
| #include <asm/mach/time.h> |
| |
| static int __init ixp4xx_clocksource_init(void); |
| static int __init ixp4xx_clockevent_init(void); |
| static struct clock_event_device clockevent_ixp4xx; |
| |
| /************************************************************************* |
| * IXP4xx chipset I/O mapping |
| *************************************************************************/ |
| static struct map_desc ixp4xx_io_desc[] __initdata = { |
| { /* UART, Interrupt ctrl, GPIO, timers, NPEs, MACs, USB .... */ |
| .virtual = IXP4XX_PERIPHERAL_BASE_VIRT, |
| .pfn = __phys_to_pfn(IXP4XX_PERIPHERAL_BASE_PHYS), |
| .length = IXP4XX_PERIPHERAL_REGION_SIZE, |
| .type = MT_DEVICE |
| }, { /* Expansion Bus Config Registers */ |
| .virtual = IXP4XX_EXP_CFG_BASE_VIRT, |
| .pfn = __phys_to_pfn(IXP4XX_EXP_CFG_BASE_PHYS), |
| .length = IXP4XX_EXP_CFG_REGION_SIZE, |
| .type = MT_DEVICE |
| }, { /* PCI Registers */ |
| .virtual = IXP4XX_PCI_CFG_BASE_VIRT, |
| .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), |
| .length = IXP4XX_PCI_CFG_REGION_SIZE, |
| .type = MT_DEVICE |
| }, |
| #ifdef CONFIG_DEBUG_LL |
| { /* Debug UART mapping */ |
| .virtual = IXP4XX_DEBUG_UART_BASE_VIRT, |
| .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), |
| .length = IXP4XX_DEBUG_UART_REGION_SIZE, |
| .type = MT_DEVICE |
| } |
| #endif |
| }; |
| |
| void __init ixp4xx_map_io(void) |
| { |
| iotable_init(ixp4xx_io_desc, ARRAY_SIZE(ixp4xx_io_desc)); |
| } |
| |
| |
| /************************************************************************* |
| * IXP4xx chipset IRQ handling |
| * |
| * TODO: GPIO IRQs should be marked invalid until the user of the IRQ |
| * (be it PCI or something else) configures that GPIO line |
| * as an IRQ. |
| **************************************************************************/ |
| enum ixp4xx_irq_type { |
| IXP4XX_IRQ_LEVEL, IXP4XX_IRQ_EDGE |
| }; |
| |
| /* Each bit represents an IRQ: 1: edge-triggered, 0: level triggered */ |
| static unsigned long long ixp4xx_irq_edge = 0; |
| |
| /* |
| * IRQ -> GPIO mapping table |
| */ |
| static signed char irq2gpio[32] = { |
| -1, -1, -1, -1, -1, -1, 0, 1, |
| -1, -1, -1, -1, -1, -1, -1, -1, |
| -1, -1, -1, 2, 3, 4, 5, 6, |
| 7, 8, 9, 10, 11, 12, -1, -1, |
| }; |
| |
| int gpio_to_irq(int gpio) |
| { |
| int irq; |
| |
| for (irq = 0; irq < 32; irq++) { |
| if (irq2gpio[irq] == gpio) |
| return irq; |
| } |
| return -EINVAL; |
| } |
| EXPORT_SYMBOL(gpio_to_irq); |
| |
| int irq_to_gpio(int irq) |
| { |
| int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL; |
| |
| if (gpio == -1) |
| return -EINVAL; |
| |
| return gpio; |
| } |
| EXPORT_SYMBOL(irq_to_gpio); |
| |
| static int ixp4xx_set_irq_type(unsigned int irq, unsigned int type) |
| { |
| int line = irq2gpio[irq]; |
| u32 int_style; |
| enum ixp4xx_irq_type irq_type; |
| volatile u32 *int_reg; |
| |
| /* |
| * Only for GPIO IRQs |
| */ |
| if (line < 0) |
| return -EINVAL; |
| |
| switch (type){ |
| case IRQT_BOTHEDGE: |
| int_style = IXP4XX_GPIO_STYLE_TRANSITIONAL; |
| irq_type = IXP4XX_IRQ_EDGE; |
| break; |
| case IRQT_RISING: |
| int_style = IXP4XX_GPIO_STYLE_RISING_EDGE; |
| irq_type = IXP4XX_IRQ_EDGE; |
| break; |
| case IRQT_FALLING: |
| int_style = IXP4XX_GPIO_STYLE_FALLING_EDGE; |
| irq_type = IXP4XX_IRQ_EDGE; |
| break; |
| case IRQT_HIGH: |
| int_style = IXP4XX_GPIO_STYLE_ACTIVE_HIGH; |
| irq_type = IXP4XX_IRQ_LEVEL; |
| break; |
| case IRQT_LOW: |
| int_style = IXP4XX_GPIO_STYLE_ACTIVE_LOW; |
| irq_type = IXP4XX_IRQ_LEVEL; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| if (irq_type == IXP4XX_IRQ_EDGE) |
| ixp4xx_irq_edge |= (1 << irq); |
| else |
| ixp4xx_irq_edge &= ~(1 << irq); |
| |
| if (line >= 8) { /* pins 8-15 */ |
| line -= 8; |
| int_reg = IXP4XX_GPIO_GPIT2R; |
| } else { /* pins 0-7 */ |
| int_reg = IXP4XX_GPIO_GPIT1R; |
| } |
| |
| /* Clear the style for the appropriate pin */ |
| *int_reg &= ~(IXP4XX_GPIO_STYLE_CLEAR << |
| (line * IXP4XX_GPIO_STYLE_SIZE)); |
| |
| *IXP4XX_GPIO_GPISR = (1 << line); |
| |
| /* Set the new style */ |
| *int_reg |= (int_style << (line * IXP4XX_GPIO_STYLE_SIZE)); |
| |
| /* Configure the line as an input */ |
| gpio_line_config(line, IXP4XX_GPIO_IN); |
| |
| return 0; |
| } |
| |
| static void ixp4xx_irq_mask(unsigned int irq) |
| { |
| if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32) |
| *IXP4XX_ICMR2 &= ~(1 << (irq - 32)); |
| else |
| *IXP4XX_ICMR &= ~(1 << irq); |
| } |
| |
| static void ixp4xx_irq_ack(unsigned int irq) |
| { |
| int line = (irq < 32) ? irq2gpio[irq] : -1; |
| |
| if (line >= 0) |
| *IXP4XX_GPIO_GPISR = (1 << line); |
| } |
| |
| /* |
| * Level triggered interrupts on GPIO lines can only be cleared when the |
| * interrupt condition disappears. |
| */ |
| static void ixp4xx_irq_unmask(unsigned int irq) |
| { |
| if (!(ixp4xx_irq_edge & (1 << irq))) |
| ixp4xx_irq_ack(irq); |
| |
| if ((cpu_is_ixp46x() || cpu_is_ixp43x()) && irq >= 32) |
| *IXP4XX_ICMR2 |= (1 << (irq - 32)); |
| else |
| *IXP4XX_ICMR |= (1 << irq); |
| } |
| |
| static struct irq_chip ixp4xx_irq_chip = { |
| .name = "IXP4xx", |
| .ack = ixp4xx_irq_ack, |
| .mask = ixp4xx_irq_mask, |
| .unmask = ixp4xx_irq_unmask, |
| .set_type = ixp4xx_set_irq_type, |
| }; |
| |
| void __init ixp4xx_init_irq(void) |
| { |
| int i = 0; |
| |
| /* Route all sources to IRQ instead of FIQ */ |
| *IXP4XX_ICLR = 0x0; |
| |
| /* Disable all interrupt */ |
| *IXP4XX_ICMR = 0x0; |
| |
| if (cpu_is_ixp46x() || cpu_is_ixp43x()) { |
| /* Route upper 32 sources to IRQ instead of FIQ */ |
| *IXP4XX_ICLR2 = 0x00; |
| |
| /* Disable upper 32 interrupts */ |
| *IXP4XX_ICMR2 = 0x00; |
| } |
| |
| /* Default to all level triggered */ |
| for(i = 0; i < NR_IRQS; i++) { |
| set_irq_chip(i, &ixp4xx_irq_chip); |
| set_irq_handler(i, handle_level_irq); |
| set_irq_flags(i, IRQF_VALID); |
| } |
| } |
| |
| |
| /************************************************************************* |
| * IXP4xx timer tick |
| * We use OS timer1 on the CPU for the timer tick and the timestamp |
| * counter as a source of real clock ticks to account for missed jiffies. |
| *************************************************************************/ |
| |
| static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id) |
| { |
| struct clock_event_device *evt = &clockevent_ixp4xx; |
| |
| /* Clear Pending Interrupt by writing '1' to it */ |
| *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; |
| |
| evt->event_handler(evt); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static struct irqaction ixp4xx_timer_irq = { |
| .name = "timer1", |
| .flags = IRQF_DISABLED | IRQF_TIMER, |
| .handler = ixp4xx_timer_interrupt, |
| }; |
| |
| static void __init ixp4xx_timer_init(void) |
| { |
| /* Reset/disable counter */ |
| *IXP4XX_OSRT1 = 0; |
| |
| /* Clear Pending Interrupt by writing '1' to it */ |
| *IXP4XX_OSST = IXP4XX_OSST_TIMER_1_PEND; |
| |
| /* Reset time-stamp counter */ |
| *IXP4XX_OSTS = 0; |
| |
| /* Connect the interrupt handler and enable the interrupt */ |
| setup_irq(IRQ_IXP4XX_TIMER1, &ixp4xx_timer_irq); |
| |
| ixp4xx_clocksource_init(); |
| ixp4xx_clockevent_init(); |
| } |
| |
| struct sys_timer ixp4xx_timer = { |
| .init = ixp4xx_timer_init, |
| }; |
| |
| static struct pxa2xx_udc_mach_info ixp4xx_udc_info; |
| |
| void __init ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info) |
| { |
| memcpy(&ixp4xx_udc_info, info, sizeof *info); |
| } |
| |
| static struct resource ixp4xx_udc_resources[] = { |
| [0] = { |
| .start = 0xc800b000, |
| .end = 0xc800bfff, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IXP4XX_USB, |
| .end = IRQ_IXP4XX_USB, |
| .flags = IORESOURCE_IRQ, |
| }, |
| }; |
| |
| /* |
| * USB device controller. The IXP4xx uses the same controller as PXA2XX, |
| * so we just use the same device. |
| */ |
| static struct platform_device ixp4xx_udc_device = { |
| .name = "pxa2xx-udc", |
| .id = -1, |
| .num_resources = 2, |
| .resource = ixp4xx_udc_resources, |
| .dev = { |
| .platform_data = &ixp4xx_udc_info, |
| }, |
| }; |
| |
| static struct platform_device *ixp4xx_devices[] __initdata = { |
| &ixp4xx_udc_device, |
| }; |
| |
| static struct resource ixp46x_i2c_resources[] = { |
| [0] = { |
| .start = 0xc8011000, |
| .end = 0xc801101c, |
| .flags = IORESOURCE_MEM, |
| }, |
| [1] = { |
| .start = IRQ_IXP4XX_I2C, |
| .end = IRQ_IXP4XX_I2C, |
| .flags = IORESOURCE_IRQ |
| } |
| }; |
| |
| /* |
| * I2C controller. The IXP46x uses the same block as the IOP3xx, so |
| * we just use the same device name. |
| */ |
| static struct platform_device ixp46x_i2c_controller = { |
| .name = "IOP3xx-I2C", |
| .id = 0, |
| .num_resources = 2, |
| .resource = ixp46x_i2c_resources |
| }; |
| |
| static struct platform_device *ixp46x_devices[] __initdata = { |
| &ixp46x_i2c_controller |
| }; |
| |
| unsigned long ixp4xx_exp_bus_size; |
| EXPORT_SYMBOL(ixp4xx_exp_bus_size); |
| |
| void __init ixp4xx_sys_init(void) |
| { |
| ixp4xx_exp_bus_size = SZ_16M; |
| |
| platform_add_devices(ixp4xx_devices, ARRAY_SIZE(ixp4xx_devices)); |
| |
| if (cpu_is_ixp46x()) { |
| int region; |
| |
| platform_add_devices(ixp46x_devices, |
| ARRAY_SIZE(ixp46x_devices)); |
| |
| for (region = 0; region < 7; region++) { |
| if((*(IXP4XX_EXP_REG(0x4 * region)) & 0x200)) { |
| ixp4xx_exp_bus_size = SZ_32M; |
| break; |
| } |
| } |
| } |
| |
| printk("IXP4xx: Using %luMiB expansion bus window size\n", |
| ixp4xx_exp_bus_size >> 20); |
| } |
| |
| /* |
| * clocksource |
| */ |
| cycle_t ixp4xx_get_cycles(void) |
| { |
| return *IXP4XX_OSTS; |
| } |
| |
| static struct clocksource clocksource_ixp4xx = { |
| .name = "OSTS", |
| .rating = 200, |
| .read = ixp4xx_get_cycles, |
| .mask = CLOCKSOURCE_MASK(32), |
| .shift = 20, |
| .flags = CLOCK_SOURCE_IS_CONTINUOUS, |
| }; |
| |
| unsigned long ixp4xx_timer_freq = FREQ; |
| static int __init ixp4xx_clocksource_init(void) |
| { |
| clocksource_ixp4xx.mult = |
| clocksource_hz2mult(ixp4xx_timer_freq, |
| clocksource_ixp4xx.shift); |
| clocksource_register(&clocksource_ixp4xx); |
| |
| return 0; |
| } |
| |
| /* |
| * clockevents |
| */ |
| static int ixp4xx_set_next_event(unsigned long evt, |
| struct clock_event_device *unused) |
| { |
| unsigned long opts = *IXP4XX_OSRT1 & IXP4XX_OST_RELOAD_MASK; |
| |
| *IXP4XX_OSRT1 = (evt & ~IXP4XX_OST_RELOAD_MASK) | opts; |
| |
| return 0; |
| } |
| |
| static void ixp4xx_set_mode(enum clock_event_mode mode, |
| struct clock_event_device *evt) |
| { |
| unsigned long opts, osrt = *IXP4XX_OSRT1 & ~IXP4XX_OST_RELOAD_MASK; |
| |
| switch (mode) { |
| case CLOCK_EVT_MODE_PERIODIC: |
| osrt = LATCH & ~IXP4XX_OST_RELOAD_MASK; |
| opts = IXP4XX_OST_ENABLE; |
| break; |
| case CLOCK_EVT_MODE_ONESHOT: |
| /* period set by 'set next_event' */ |
| osrt = 0; |
| opts = IXP4XX_OST_ENABLE | IXP4XX_OST_ONE_SHOT; |
| break; |
| case CLOCK_EVT_MODE_SHUTDOWN: |
| case CLOCK_EVT_MODE_UNUSED: |
| default: |
| osrt = opts = 0; |
| break; |
| } |
| |
| *IXP4XX_OSRT1 = osrt | opts; |
| } |
| |
| static struct clock_event_device clockevent_ixp4xx = { |
| .name = "ixp4xx timer1", |
| .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, |
| .rating = 200, |
| .shift = 24, |
| .set_mode = ixp4xx_set_mode, |
| .set_next_event = ixp4xx_set_next_event, |
| }; |
| |
| static int __init ixp4xx_clockevent_init(void) |
| { |
| clockevent_ixp4xx.mult = div_sc(FREQ, NSEC_PER_SEC, |
| clockevent_ixp4xx.shift); |
| clockevent_ixp4xx.max_delta_ns = |
| clockevent_delta2ns(0xfffffffe, &clockevent_ixp4xx); |
| clockevent_ixp4xx.min_delta_ns = |
| clockevent_delta2ns(0xf, &clockevent_ixp4xx); |
| clockevent_ixp4xx.cpumask = cpumask_of_cpu(0); |
| |
| clockevents_register_device(&clockevent_ixp4xx); |
| return 0; |
| } |