| /* |
| |
| Broadcom B43 wireless driver |
| Common PHY routines |
| |
| Copyright (c) 2005 Martin Langer <martin-langer@gmx.de>, |
| Copyright (c) 2005-2007 Stefano Brivio <stefano.brivio@polimi.it> |
| Copyright (c) 2005-2008 Michael Buesch <mb@bu3sch.de> |
| Copyright (c) 2005, 2006 Danny van Dyk <kugelfang@gentoo.org> |
| Copyright (c) 2005, 2006 Andreas Jaggi <andreas.jaggi@waterwave.ch> |
| |
| This program is free software; you can redistribute it and/or modify |
| it under the terms of the GNU General Public License as published by |
| the Free Software Foundation; either version 2 of the License, or |
| (at your option) any later version. |
| |
| This program is distributed in the hope that it will be useful, |
| but WITHOUT ANY WARRANTY; without even the implied warranty of |
| MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| GNU General Public License for more details. |
| |
| You should have received a copy of the GNU General Public License |
| along with this program; see the file COPYING. If not, write to |
| the Free Software Foundation, Inc., 51 Franklin Steet, Fifth Floor, |
| Boston, MA 02110-1301, USA. |
| |
| */ |
| |
| #include "phy_common.h" |
| #include "phy_g.h" |
| #include "phy_a.h" |
| #include "nphy.h" |
| #include "b43.h" |
| #include "main.h" |
| |
| |
| int b43_phy_operations_setup(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &(dev->phy); |
| int err; |
| |
| phy->ops = NULL; |
| |
| switch (phy->type) { |
| case B43_PHYTYPE_A: |
| phy->ops = &b43_phyops_a; |
| break; |
| case B43_PHYTYPE_G: |
| phy->ops = &b43_phyops_g; |
| break; |
| case B43_PHYTYPE_N: |
| #ifdef CONFIG_B43_NPHY |
| phy->ops = &b43_phyops_n; |
| #endif |
| break; |
| case B43_PHYTYPE_LP: |
| /* FIXME: Not yet */ |
| break; |
| } |
| if (B43_WARN_ON(!phy->ops)) |
| return -ENODEV; |
| |
| err = phy->ops->allocate(dev); |
| if (err) |
| phy->ops = NULL; |
| |
| return err; |
| } |
| |
| int b43_phy_init(struct b43_wldev *dev) |
| { |
| struct b43_phy *phy = &dev->phy; |
| const struct b43_phy_operations *ops = phy->ops; |
| int err; |
| |
| phy->channel = ops->get_default_chan(dev); |
| |
| ops->software_rfkill(dev, RFKILL_STATE_UNBLOCKED); |
| err = ops->init(dev); |
| if (err) { |
| b43err(dev->wl, "PHY init failed\n"); |
| goto err_block_rf; |
| } |
| /* Make sure to switch hardware and firmware (SHM) to |
| * the default channel. */ |
| err = b43_switch_channel(dev, ops->get_default_chan(dev)); |
| if (err) { |
| b43err(dev->wl, "PHY init: Channel switch to default failed\n"); |
| goto err_phy_exit; |
| } |
| |
| return 0; |
| |
| err_phy_exit: |
| if (ops->exit) |
| ops->exit(dev); |
| err_block_rf: |
| ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); |
| |
| return err; |
| } |
| |
| void b43_phy_exit(struct b43_wldev *dev) |
| { |
| const struct b43_phy_operations *ops = dev->phy.ops; |
| |
| ops->software_rfkill(dev, RFKILL_STATE_SOFT_BLOCKED); |
| if (ops->exit) |
| ops->exit(dev); |
| } |
| |
| bool b43_has_hardware_pctl(struct b43_wldev *dev) |
| { |
| if (!dev->phy.hardware_power_control) |
| return 0; |
| if (!dev->phy.ops->supports_hwpctl) |
| return 0; |
| return dev->phy.ops->supports_hwpctl(dev); |
| } |
| |
| void b43_radio_lock(struct b43_wldev *dev) |
| { |
| u32 macctl; |
| |
| macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| B43_WARN_ON(macctl & B43_MACCTL_RADIOLOCK); |
| macctl |= B43_MACCTL_RADIOLOCK; |
| b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| /* Commit the write and wait for the device |
| * to exit any radio register access. */ |
| b43_read32(dev, B43_MMIO_MACCTL); |
| udelay(10); |
| } |
| |
| void b43_radio_unlock(struct b43_wldev *dev) |
| { |
| u32 macctl; |
| |
| /* Commit any write */ |
| b43_read16(dev, B43_MMIO_PHY_VER); |
| /* unlock */ |
| macctl = b43_read32(dev, B43_MMIO_MACCTL); |
| B43_WARN_ON(!(macctl & B43_MACCTL_RADIOLOCK)); |
| macctl &= ~B43_MACCTL_RADIOLOCK; |
| b43_write32(dev, B43_MMIO_MACCTL, macctl); |
| } |
| |
| void b43_phy_lock(struct b43_wldev *dev) |
| { |
| #if B43_DEBUG |
| B43_WARN_ON(dev->phy.phy_locked); |
| dev->phy.phy_locked = 1; |
| #endif |
| B43_WARN_ON(dev->dev->id.revision < 3); |
| |
| if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) |
| b43_power_saving_ctl_bits(dev, B43_PS_AWAKE); |
| } |
| |
| void b43_phy_unlock(struct b43_wldev *dev) |
| { |
| #if B43_DEBUG |
| B43_WARN_ON(!dev->phy.phy_locked); |
| dev->phy.phy_locked = 0; |
| #endif |
| B43_WARN_ON(dev->dev->id.revision < 3); |
| |
| if (!b43_is_mode(dev->wl, IEEE80211_IF_TYPE_AP)) |
| b43_power_saving_ctl_bits(dev, 0); |
| } |
| |
| u16 b43_radio_read(struct b43_wldev *dev, u16 reg) |
| { |
| return dev->phy.ops->radio_read(dev, reg); |
| } |
| |
| void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value) |
| { |
| dev->phy.ops->radio_write(dev, reg, value); |
| } |
| |
| void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask) |
| { |
| b43_radio_write16(dev, offset, |
| b43_radio_read16(dev, offset) & mask); |
| } |
| |
| void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set) |
| { |
| b43_radio_write16(dev, offset, |
| b43_radio_read16(dev, offset) | set); |
| } |
| |
| void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) |
| { |
| b43_radio_write16(dev, offset, |
| (b43_radio_read16(dev, offset) & mask) | set); |
| } |
| |
| u16 b43_phy_read(struct b43_wldev *dev, u16 reg) |
| { |
| return dev->phy.ops->phy_read(dev, reg); |
| } |
| |
| void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value) |
| { |
| dev->phy.ops->phy_write(dev, reg, value); |
| } |
| |
| void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask) |
| { |
| b43_phy_write(dev, offset, |
| b43_phy_read(dev, offset) & mask); |
| } |
| |
| void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set) |
| { |
| b43_phy_write(dev, offset, |
| b43_phy_read(dev, offset) | set); |
| } |
| |
| void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set) |
| { |
| b43_phy_write(dev, offset, |
| (b43_phy_read(dev, offset) & mask) | set); |
| } |
| |
| int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel) |
| { |
| struct b43_phy *phy = &(dev->phy); |
| u16 channelcookie, savedcookie; |
| int err; |
| |
| if (new_channel == B43_DEFAULT_CHANNEL) |
| new_channel = phy->ops->get_default_chan(dev); |
| |
| /* First we set the channel radio code to prevent the |
| * firmware from sending ghost packets. |
| */ |
| channelcookie = new_channel; |
| if (b43_current_band(dev->wl) == IEEE80211_BAND_5GHZ) |
| channelcookie |= 0x100; |
| //FIXME set 40Mhz flag if required |
| savedcookie = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN); |
| b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_CHAN, channelcookie); |
| |
| /* Now try to switch the PHY hardware channel. */ |
| err = phy->ops->switch_channel(dev, new_channel); |
| if (err) |
| goto err_restore_cookie; |
| |
| dev->phy.channel = new_channel; |
| /* Wait for the radio to tune to the channel and stabilize. */ |
| msleep(8); |
| |
| return 0; |
| |
| err_restore_cookie: |
| b43_shm_write16(dev, B43_SHM_SHARED, |
| B43_SHM_SH_CHAN, savedcookie); |
| |
| return err; |
| } |
| |
| void b43_software_rfkill(struct b43_wldev *dev, enum rfkill_state state) |
| { |
| struct b43_phy *phy = &dev->phy; |
| |
| if (state == RFKILL_STATE_HARD_BLOCKED) { |
| /* We cannot hardware-block the device */ |
| state = RFKILL_STATE_SOFT_BLOCKED; |
| } |
| |
| phy->ops->software_rfkill(dev, state); |
| phy->radio_on = (state == RFKILL_STATE_UNBLOCKED); |
| } |