| /* |
| * Intel IO-APIC support for multi-Pentium hosts. |
| * |
| * Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar, Hajnalka Szabo |
| * |
| * Many thanks to Stig Venaas for trying out countless experimental |
| * patches and reporting/debugging problems patiently! |
| * |
| * (c) 1999, Multiple IO-APIC support, developed by |
| * Ken-ichi Yaku <yaku@css1.kbnes.nec.co.jp> and |
| * Hidemi Kishimoto <kisimoto@css1.kbnes.nec.co.jp>, |
| * further tested and cleaned up by Zach Brown <zab@redhat.com> |
| * and Ingo Molnar <mingo@redhat.com> |
| * |
| * Fixes |
| * Maciej W. Rozycki : Bits for genuine 82489DX APICs; |
| * thanks to Eric Gilmore |
| * and Rolf G. Tews |
| * for testing these extensively |
| * Paul Diefenbaugh : Added full ACPI support |
| */ |
| |
| #include <linux/mm.h> |
| #include <linux/interrupt.h> |
| #include <linux/init.h> |
| #include <linux/delay.h> |
| #include <linux/sched.h> |
| #include <linux/config.h> |
| #include <linux/smp_lock.h> |
| #include <linux/mc146818rtc.h> |
| #include <linux/compiler.h> |
| #include <linux/acpi.h> |
| #include <linux/module.h> |
| #include <linux/sysdev.h> |
| |
| #include <asm/io.h> |
| #include <asm/smp.h> |
| #include <asm/desc.h> |
| #include <asm/timer.h> |
| #include <asm/i8259.h> |
| |
| #include <mach_apic.h> |
| |
| #include "io_ports.h" |
| |
| int (*ioapic_renumber_irq)(int ioapic, int irq); |
| atomic_t irq_mis_count; |
| |
| static DEFINE_SPINLOCK(ioapic_lock); |
| |
| /* |
| * Is the SiS APIC rmw bug present ? |
| * -1 = don't know, 0 = no, 1 = yes |
| */ |
| int sis_apic_bug = -1; |
| |
| /* |
| * # of IRQ routing registers |
| */ |
| int nr_ioapic_registers[MAX_IO_APICS]; |
| |
| int disable_timer_pin_1 __initdata; |
| |
| /* |
| * Rough estimation of how many shared IRQs there are, can |
| * be changed anytime. |
| */ |
| #define MAX_PLUS_SHARED_IRQS NR_IRQS |
| #define PIN_MAP_SIZE (MAX_PLUS_SHARED_IRQS + NR_IRQS) |
| |
| /* |
| * This is performance-critical, we want to do it O(1) |
| * |
| * the indexing order of this array favors 1:1 mappings |
| * between pins and IRQs. |
| */ |
| |
| static struct irq_pin_list { |
| int apic, pin, next; |
| } irq_2_pin[PIN_MAP_SIZE]; |
| |
| int vector_irq[NR_VECTORS] __read_mostly = { [0 ... NR_VECTORS - 1] = -1}; |
| #ifdef CONFIG_PCI_MSI |
| #define vector_to_irq(vector) \ |
| (platform_legacy_irq(vector) ? vector : vector_irq[vector]) |
| #else |
| #define vector_to_irq(vector) (vector) |
| #endif |
| |
| /* |
| * The common case is 1:1 IRQ<->pin mappings. Sometimes there are |
| * shared ISA-space IRQs, so we have to support them. We are super |
| * fast in the common case, and fast for shared ISA-space IRQs. |
| */ |
| static void add_pin_to_irq(unsigned int irq, int apic, int pin) |
| { |
| static int first_free_entry = NR_IRQS; |
| struct irq_pin_list *entry = irq_2_pin + irq; |
| |
| while (entry->next) |
| entry = irq_2_pin + entry->next; |
| |
| if (entry->pin != -1) { |
| entry->next = first_free_entry; |
| entry = irq_2_pin + entry->next; |
| if (++first_free_entry >= PIN_MAP_SIZE) |
| panic("io_apic.c: whoops"); |
| } |
| entry->apic = apic; |
| entry->pin = pin; |
| } |
| |
| /* |
| * Reroute an IRQ to a different pin. |
| */ |
| static void __init replace_pin_at_irq(unsigned int irq, |
| int oldapic, int oldpin, |
| int newapic, int newpin) |
| { |
| struct irq_pin_list *entry = irq_2_pin + irq; |
| |
| while (1) { |
| if (entry->apic == oldapic && entry->pin == oldpin) { |
| entry->apic = newapic; |
| entry->pin = newpin; |
| } |
| if (!entry->next) |
| break; |
| entry = irq_2_pin + entry->next; |
| } |
| } |
| |
| static void __modify_IO_APIC_irq (unsigned int irq, unsigned long enable, unsigned long disable) |
| { |
| struct irq_pin_list *entry = irq_2_pin + irq; |
| unsigned int pin, reg; |
| |
| for (;;) { |
| pin = entry->pin; |
| if (pin == -1) |
| break; |
| reg = io_apic_read(entry->apic, 0x10 + pin*2); |
| reg &= ~disable; |
| reg |= enable; |
| io_apic_modify(entry->apic, 0x10 + pin*2, reg); |
| if (!entry->next) |
| break; |
| entry = irq_2_pin + entry->next; |
| } |
| } |
| |
| /* mask = 1 */ |
| static void __mask_IO_APIC_irq (unsigned int irq) |
| { |
| __modify_IO_APIC_irq(irq, 0x00010000, 0); |
| } |
| |
| /* mask = 0 */ |
| static void __unmask_IO_APIC_irq (unsigned int irq) |
| { |
| __modify_IO_APIC_irq(irq, 0, 0x00010000); |
| } |
| |
| /* mask = 1, trigger = 0 */ |
| static void __mask_and_edge_IO_APIC_irq (unsigned int irq) |
| { |
| __modify_IO_APIC_irq(irq, 0x00010000, 0x00008000); |
| } |
| |
| /* mask = 0, trigger = 1 */ |
| static void __unmask_and_level_IO_APIC_irq (unsigned int irq) |
| { |
| __modify_IO_APIC_irq(irq, 0x00008000, 0x00010000); |
| } |
| |
| static void mask_IO_APIC_irq (unsigned int irq) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| __mask_IO_APIC_irq(irq); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| static void unmask_IO_APIC_irq (unsigned int irq) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| __unmask_IO_APIC_irq(irq); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| static void clear_IO_APIC_pin(unsigned int apic, unsigned int pin) |
| { |
| struct IO_APIC_route_entry entry; |
| unsigned long flags; |
| |
| /* Check delivery_mode to be sure we're not clearing an SMI pin */ |
| spin_lock_irqsave(&ioapic_lock, flags); |
| *(((int*)&entry) + 0) = io_apic_read(apic, 0x10 + 2 * pin); |
| *(((int*)&entry) + 1) = io_apic_read(apic, 0x11 + 2 * pin); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| if (entry.delivery_mode == dest_SMI) |
| return; |
| |
| /* |
| * Disable it in the IO-APIC irq-routing table: |
| */ |
| memset(&entry, 0, sizeof(entry)); |
| entry.mask = 1; |
| spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(apic, 0x10 + 2 * pin, *(((int *)&entry) + 0)); |
| io_apic_write(apic, 0x11 + 2 * pin, *(((int *)&entry) + 1)); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| static void clear_IO_APIC (void) |
| { |
| int apic, pin; |
| |
| for (apic = 0; apic < nr_ioapics; apic++) |
| for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) |
| clear_IO_APIC_pin(apic, pin); |
| } |
| |
| #ifdef CONFIG_SMP |
| static void set_ioapic_affinity_irq(unsigned int irq, cpumask_t cpumask) |
| { |
| unsigned long flags; |
| int pin; |
| struct irq_pin_list *entry = irq_2_pin + irq; |
| unsigned int apicid_value; |
| cpumask_t tmp; |
| |
| cpus_and(tmp, cpumask, cpu_online_map); |
| if (cpus_empty(tmp)) |
| tmp = TARGET_CPUS; |
| |
| cpus_and(cpumask, tmp, CPU_MASK_ALL); |
| |
| apicid_value = cpu_mask_to_apicid(cpumask); |
| /* Prepare to do the io_apic_write */ |
| apicid_value = apicid_value << 24; |
| spin_lock_irqsave(&ioapic_lock, flags); |
| for (;;) { |
| pin = entry->pin; |
| if (pin == -1) |
| break; |
| io_apic_write(entry->apic, 0x10 + 1 + pin*2, apicid_value); |
| if (!entry->next) |
| break; |
| entry = irq_2_pin + entry->next; |
| } |
| set_irq_info(irq, cpumask); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| #if defined(CONFIG_IRQBALANCE) |
| # include <asm/processor.h> /* kernel_thread() */ |
| # include <linux/kernel_stat.h> /* kstat */ |
| # include <linux/slab.h> /* kmalloc() */ |
| # include <linux/timer.h> /* time_after() */ |
| |
| # ifdef CONFIG_BALANCED_IRQ_DEBUG |
| # define TDprintk(x...) do { printk("<%ld:%s:%d>: ", jiffies, __FILE__, __LINE__); printk(x); } while (0) |
| # define Dprintk(x...) do { TDprintk(x); } while (0) |
| # else |
| # define TDprintk(x...) |
| # define Dprintk(x...) |
| # endif |
| |
| |
| #define IRQBALANCE_CHECK_ARCH -999 |
| static int irqbalance_disabled = IRQBALANCE_CHECK_ARCH; |
| static int physical_balance = 0; |
| |
| static struct irq_cpu_info { |
| unsigned long * last_irq; |
| unsigned long * irq_delta; |
| unsigned long irq; |
| } irq_cpu_data[NR_CPUS]; |
| |
| #define CPU_IRQ(cpu) (irq_cpu_data[cpu].irq) |
| #define LAST_CPU_IRQ(cpu,irq) (irq_cpu_data[cpu].last_irq[irq]) |
| #define IRQ_DELTA(cpu,irq) (irq_cpu_data[cpu].irq_delta[irq]) |
| |
| #define IDLE_ENOUGH(cpu,now) \ |
| (idle_cpu(cpu) && ((now) - per_cpu(irq_stat, (cpu)).idle_timestamp > 1)) |
| |
| #define IRQ_ALLOWED(cpu, allowed_mask) cpu_isset(cpu, allowed_mask) |
| |
| #define CPU_TO_PACKAGEINDEX(i) (first_cpu(cpu_sibling_map[i])) |
| |
| #define MAX_BALANCED_IRQ_INTERVAL (5*HZ) |
| #define MIN_BALANCED_IRQ_INTERVAL (HZ/2) |
| #define BALANCED_IRQ_MORE_DELTA (HZ/10) |
| #define BALANCED_IRQ_LESS_DELTA (HZ) |
| |
| static long balanced_irq_interval = MAX_BALANCED_IRQ_INTERVAL; |
| |
| static unsigned long move(int curr_cpu, cpumask_t allowed_mask, |
| unsigned long now, int direction) |
| { |
| int search_idle = 1; |
| int cpu = curr_cpu; |
| |
| goto inside; |
| |
| do { |
| if (unlikely(cpu == curr_cpu)) |
| search_idle = 0; |
| inside: |
| if (direction == 1) { |
| cpu++; |
| if (cpu >= NR_CPUS) |
| cpu = 0; |
| } else { |
| cpu--; |
| if (cpu == -1) |
| cpu = NR_CPUS-1; |
| } |
| } while (!cpu_online(cpu) || !IRQ_ALLOWED(cpu,allowed_mask) || |
| (search_idle && !IDLE_ENOUGH(cpu,now))); |
| |
| return cpu; |
| } |
| |
| static inline void balance_irq(int cpu, int irq) |
| { |
| unsigned long now = jiffies; |
| cpumask_t allowed_mask; |
| unsigned int new_cpu; |
| |
| if (irqbalance_disabled) |
| return; |
| |
| cpus_and(allowed_mask, cpu_online_map, irq_affinity[irq]); |
| new_cpu = move(cpu, allowed_mask, now, 1); |
| if (cpu != new_cpu) { |
| set_pending_irq(irq, cpumask_of_cpu(new_cpu)); |
| } |
| } |
| |
| static inline void rotate_irqs_among_cpus(unsigned long useful_load_threshold) |
| { |
| int i, j; |
| Dprintk("Rotating IRQs among CPUs.\n"); |
| for (i = 0; i < NR_CPUS; i++) { |
| for (j = 0; cpu_online(i) && (j < NR_IRQS); j++) { |
| if (!irq_desc[j].action) |
| continue; |
| /* Is it a significant load ? */ |
| if (IRQ_DELTA(CPU_TO_PACKAGEINDEX(i),j) < |
| useful_load_threshold) |
| continue; |
| balance_irq(i, j); |
| } |
| } |
| balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, |
| balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); |
| return; |
| } |
| |
| static void do_irq_balance(void) |
| { |
| int i, j; |
| unsigned long max_cpu_irq = 0, min_cpu_irq = (~0); |
| unsigned long move_this_load = 0; |
| int max_loaded = 0, min_loaded = 0; |
| int load; |
| unsigned long useful_load_threshold = balanced_irq_interval + 10; |
| int selected_irq; |
| int tmp_loaded, first_attempt = 1; |
| unsigned long tmp_cpu_irq; |
| unsigned long imbalance = 0; |
| cpumask_t allowed_mask, target_cpu_mask, tmp; |
| |
| for (i = 0; i < NR_CPUS; i++) { |
| int package_index; |
| CPU_IRQ(i) = 0; |
| if (!cpu_online(i)) |
| continue; |
| package_index = CPU_TO_PACKAGEINDEX(i); |
| for (j = 0; j < NR_IRQS; j++) { |
| unsigned long value_now, delta; |
| /* Is this an active IRQ? */ |
| if (!irq_desc[j].action) |
| continue; |
| if ( package_index == i ) |
| IRQ_DELTA(package_index,j) = 0; |
| /* Determine the total count per processor per IRQ */ |
| value_now = (unsigned long) kstat_cpu(i).irqs[j]; |
| |
| /* Determine the activity per processor per IRQ */ |
| delta = value_now - LAST_CPU_IRQ(i,j); |
| |
| /* Update last_cpu_irq[][] for the next time */ |
| LAST_CPU_IRQ(i,j) = value_now; |
| |
| /* Ignore IRQs whose rate is less than the clock */ |
| if (delta < useful_load_threshold) |
| continue; |
| /* update the load for the processor or package total */ |
| IRQ_DELTA(package_index,j) += delta; |
| |
| /* Keep track of the higher numbered sibling as well */ |
| if (i != package_index) |
| CPU_IRQ(i) += delta; |
| /* |
| * We have sibling A and sibling B in the package |
| * |
| * cpu_irq[A] = load for cpu A + load for cpu B |
| * cpu_irq[B] = load for cpu B |
| */ |
| CPU_IRQ(package_index) += delta; |
| } |
| } |
| /* Find the least loaded processor package */ |
| for (i = 0; i < NR_CPUS; i++) { |
| if (!cpu_online(i)) |
| continue; |
| if (i != CPU_TO_PACKAGEINDEX(i)) |
| continue; |
| if (min_cpu_irq > CPU_IRQ(i)) { |
| min_cpu_irq = CPU_IRQ(i); |
| min_loaded = i; |
| } |
| } |
| max_cpu_irq = ULONG_MAX; |
| |
| tryanothercpu: |
| /* Look for heaviest loaded processor. |
| * We may come back to get the next heaviest loaded processor. |
| * Skip processors with trivial loads. |
| */ |
| tmp_cpu_irq = 0; |
| tmp_loaded = -1; |
| for (i = 0; i < NR_CPUS; i++) { |
| if (!cpu_online(i)) |
| continue; |
| if (i != CPU_TO_PACKAGEINDEX(i)) |
| continue; |
| if (max_cpu_irq <= CPU_IRQ(i)) |
| continue; |
| if (tmp_cpu_irq < CPU_IRQ(i)) { |
| tmp_cpu_irq = CPU_IRQ(i); |
| tmp_loaded = i; |
| } |
| } |
| |
| if (tmp_loaded == -1) { |
| /* In the case of small number of heavy interrupt sources, |
| * loading some of the cpus too much. We use Ingo's original |
| * approach to rotate them around. |
| */ |
| if (!first_attempt && imbalance >= useful_load_threshold) { |
| rotate_irqs_among_cpus(useful_load_threshold); |
| return; |
| } |
| goto not_worth_the_effort; |
| } |
| |
| first_attempt = 0; /* heaviest search */ |
| max_cpu_irq = tmp_cpu_irq; /* load */ |
| max_loaded = tmp_loaded; /* processor */ |
| imbalance = (max_cpu_irq - min_cpu_irq) / 2; |
| |
| Dprintk("max_loaded cpu = %d\n", max_loaded); |
| Dprintk("min_loaded cpu = %d\n", min_loaded); |
| Dprintk("max_cpu_irq load = %ld\n", max_cpu_irq); |
| Dprintk("min_cpu_irq load = %ld\n", min_cpu_irq); |
| Dprintk("load imbalance = %lu\n", imbalance); |
| |
| /* if imbalance is less than approx 10% of max load, then |
| * observe diminishing returns action. - quit |
| */ |
| if (imbalance < (max_cpu_irq >> 3)) { |
| Dprintk("Imbalance too trivial\n"); |
| goto not_worth_the_effort; |
| } |
| |
| tryanotherirq: |
| /* if we select an IRQ to move that can't go where we want, then |
| * see if there is another one to try. |
| */ |
| move_this_load = 0; |
| selected_irq = -1; |
| for (j = 0; j < NR_IRQS; j++) { |
| /* Is this an active IRQ? */ |
| if (!irq_desc[j].action) |
| continue; |
| if (imbalance <= IRQ_DELTA(max_loaded,j)) |
| continue; |
| /* Try to find the IRQ that is closest to the imbalance |
| * without going over. |
| */ |
| if (move_this_load < IRQ_DELTA(max_loaded,j)) { |
| move_this_load = IRQ_DELTA(max_loaded,j); |
| selected_irq = j; |
| } |
| } |
| if (selected_irq == -1) { |
| goto tryanothercpu; |
| } |
| |
| imbalance = move_this_load; |
| |
| /* For physical_balance case, we accumlated both load |
| * values in the one of the siblings cpu_irq[], |
| * to use the same code for physical and logical processors |
| * as much as possible. |
| * |
| * NOTE: the cpu_irq[] array holds the sum of the load for |
| * sibling A and sibling B in the slot for the lowest numbered |
| * sibling (A), _AND_ the load for sibling B in the slot for |
| * the higher numbered sibling. |
| * |
| * We seek the least loaded sibling by making the comparison |
| * (A+B)/2 vs B |
| */ |
| load = CPU_IRQ(min_loaded) >> 1; |
| for_each_cpu_mask(j, cpu_sibling_map[min_loaded]) { |
| if (load > CPU_IRQ(j)) { |
| /* This won't change cpu_sibling_map[min_loaded] */ |
| load = CPU_IRQ(j); |
| min_loaded = j; |
| } |
| } |
| |
| cpus_and(allowed_mask, cpu_online_map, irq_affinity[selected_irq]); |
| target_cpu_mask = cpumask_of_cpu(min_loaded); |
| cpus_and(tmp, target_cpu_mask, allowed_mask); |
| |
| if (!cpus_empty(tmp)) { |
| |
| Dprintk("irq = %d moved to cpu = %d\n", |
| selected_irq, min_loaded); |
| /* mark for change destination */ |
| set_pending_irq(selected_irq, cpumask_of_cpu(min_loaded)); |
| |
| /* Since we made a change, come back sooner to |
| * check for more variation. |
| */ |
| balanced_irq_interval = max((long)MIN_BALANCED_IRQ_INTERVAL, |
| balanced_irq_interval - BALANCED_IRQ_LESS_DELTA); |
| return; |
| } |
| goto tryanotherirq; |
| |
| not_worth_the_effort: |
| /* |
| * if we did not find an IRQ to move, then adjust the time interval |
| * upward |
| */ |
| balanced_irq_interval = min((long)MAX_BALANCED_IRQ_INTERVAL, |
| balanced_irq_interval + BALANCED_IRQ_MORE_DELTA); |
| Dprintk("IRQ worth rotating not found\n"); |
| return; |
| } |
| |
| static int balanced_irq(void *unused) |
| { |
| int i; |
| unsigned long prev_balance_time = jiffies; |
| long time_remaining = balanced_irq_interval; |
| |
| daemonize("kirqd"); |
| |
| /* push everything to CPU 0 to give us a starting point. */ |
| for (i = 0 ; i < NR_IRQS ; i++) { |
| pending_irq_cpumask[i] = cpumask_of_cpu(0); |
| set_pending_irq(i, cpumask_of_cpu(0)); |
| } |
| |
| for ( ; ; ) { |
| time_remaining = schedule_timeout_interruptible(time_remaining); |
| try_to_freeze(); |
| if (time_after(jiffies, |
| prev_balance_time+balanced_irq_interval)) { |
| preempt_disable(); |
| do_irq_balance(); |
| prev_balance_time = jiffies; |
| time_remaining = balanced_irq_interval; |
| preempt_enable(); |
| } |
| } |
| return 0; |
| } |
| |
| static int __init balanced_irq_init(void) |
| { |
| int i; |
| struct cpuinfo_x86 *c; |
| cpumask_t tmp; |
| |
| cpus_shift_right(tmp, cpu_online_map, 2); |
| c = &boot_cpu_data; |
| /* When not overwritten by the command line ask subarchitecture. */ |
| if (irqbalance_disabled == IRQBALANCE_CHECK_ARCH) |
| irqbalance_disabled = NO_BALANCE_IRQ; |
| if (irqbalance_disabled) |
| return 0; |
| |
| /* disable irqbalance completely if there is only one processor online */ |
| if (num_online_cpus() < 2) { |
| irqbalance_disabled = 1; |
| return 0; |
| } |
| /* |
| * Enable physical balance only if more than 1 physical processor |
| * is present |
| */ |
| if (smp_num_siblings > 1 && !cpus_empty(tmp)) |
| physical_balance = 1; |
| |
| for (i = 0; i < NR_CPUS; i++) { |
| if (!cpu_online(i)) |
| continue; |
| irq_cpu_data[i].irq_delta = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); |
| irq_cpu_data[i].last_irq = kmalloc(sizeof(unsigned long) * NR_IRQS, GFP_KERNEL); |
| if (irq_cpu_data[i].irq_delta == NULL || irq_cpu_data[i].last_irq == NULL) { |
| printk(KERN_ERR "balanced_irq_init: out of memory"); |
| goto failed; |
| } |
| memset(irq_cpu_data[i].irq_delta,0,sizeof(unsigned long) * NR_IRQS); |
| memset(irq_cpu_data[i].last_irq,0,sizeof(unsigned long) * NR_IRQS); |
| } |
| |
| printk(KERN_INFO "Starting balanced_irq\n"); |
| if (kernel_thread(balanced_irq, NULL, CLONE_KERNEL) >= 0) |
| return 0; |
| else |
| printk(KERN_ERR "balanced_irq_init: failed to spawn balanced_irq"); |
| failed: |
| for (i = 0; i < NR_CPUS; i++) { |
| kfree(irq_cpu_data[i].irq_delta); |
| kfree(irq_cpu_data[i].last_irq); |
| } |
| return 0; |
| } |
| |
| int __init irqbalance_disable(char *str) |
| { |
| irqbalance_disabled = 1; |
| return 0; |
| } |
| |
| __setup("noirqbalance", irqbalance_disable); |
| |
| late_initcall(balanced_irq_init); |
| #endif /* CONFIG_IRQBALANCE */ |
| #endif /* CONFIG_SMP */ |
| |
| #ifndef CONFIG_SMP |
| void fastcall send_IPI_self(int vector) |
| { |
| unsigned int cfg; |
| |
| /* |
| * Wait for idle. |
| */ |
| apic_wait_icr_idle(); |
| cfg = APIC_DM_FIXED | APIC_DEST_SELF | vector | APIC_DEST_LOGICAL; |
| /* |
| * Send the IPI. The write to APIC_ICR fires this off. |
| */ |
| apic_write_around(APIC_ICR, cfg); |
| } |
| #endif /* !CONFIG_SMP */ |
| |
| |
| /* |
| * support for broken MP BIOSs, enables hand-redirection of PIRQ0-7 to |
| * specific CPU-side IRQs. |
| */ |
| |
| #define MAX_PIRQS 8 |
| static int pirq_entries [MAX_PIRQS]; |
| static int pirqs_enabled; |
| int skip_ioapic_setup; |
| |
| static int __init ioapic_setup(char *str) |
| { |
| skip_ioapic_setup = 1; |
| return 1; |
| } |
| |
| __setup("noapic", ioapic_setup); |
| |
| static int __init ioapic_pirq_setup(char *str) |
| { |
| int i, max; |
| int ints[MAX_PIRQS+1]; |
| |
| get_options(str, ARRAY_SIZE(ints), ints); |
| |
| for (i = 0; i < MAX_PIRQS; i++) |
| pirq_entries[i] = -1; |
| |
| pirqs_enabled = 1; |
| apic_printk(APIC_VERBOSE, KERN_INFO |
| "PIRQ redirection, working around broken MP-BIOS.\n"); |
| max = MAX_PIRQS; |
| if (ints[0] < MAX_PIRQS) |
| max = ints[0]; |
| |
| for (i = 0; i < max; i++) { |
| apic_printk(APIC_VERBOSE, KERN_DEBUG |
| "... PIRQ%d -> IRQ %d\n", i, ints[i+1]); |
| /* |
| * PIRQs are mapped upside down, usually. |
| */ |
| pirq_entries[MAX_PIRQS-i-1] = ints[i+1]; |
| } |
| return 1; |
| } |
| |
| __setup("pirq=", ioapic_pirq_setup); |
| |
| /* |
| * Find the IRQ entry number of a certain pin. |
| */ |
| static int find_irq_entry(int apic, int pin, int type) |
| { |
| int i; |
| |
| for (i = 0; i < mp_irq_entries; i++) |
| if (mp_irqs[i].mpc_irqtype == type && |
| (mp_irqs[i].mpc_dstapic == mp_ioapics[apic].mpc_apicid || |
| mp_irqs[i].mpc_dstapic == MP_APIC_ALL) && |
| mp_irqs[i].mpc_dstirq == pin) |
| return i; |
| |
| return -1; |
| } |
| |
| /* |
| * Find the pin to which IRQ[irq] (ISA) is connected |
| */ |
| static int find_isa_irq_pin(int irq, int type) |
| { |
| int i; |
| |
| for (i = 0; i < mp_irq_entries; i++) { |
| int lbus = mp_irqs[i].mpc_srcbus; |
| |
| if ((mp_bus_id_to_type[lbus] == MP_BUS_ISA || |
| mp_bus_id_to_type[lbus] == MP_BUS_EISA || |
| mp_bus_id_to_type[lbus] == MP_BUS_MCA || |
| mp_bus_id_to_type[lbus] == MP_BUS_NEC98 |
| ) && |
| (mp_irqs[i].mpc_irqtype == type) && |
| (mp_irqs[i].mpc_srcbusirq == irq)) |
| |
| return mp_irqs[i].mpc_dstirq; |
| } |
| return -1; |
| } |
| |
| /* |
| * Find a specific PCI IRQ entry. |
| * Not an __init, possibly needed by modules |
| */ |
| static int pin_2_irq(int idx, int apic, int pin); |
| |
| int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) |
| { |
| int apic, i, best_guess = -1; |
| |
| apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, " |
| "slot:%d, pin:%d.\n", bus, slot, pin); |
| if (mp_bus_id_to_pci_bus[bus] == -1) { |
| printk(KERN_WARNING "PCI BIOS passed nonexistent PCI bus %d!\n", bus); |
| return -1; |
| } |
| for (i = 0; i < mp_irq_entries; i++) { |
| int lbus = mp_irqs[i].mpc_srcbus; |
| |
| for (apic = 0; apic < nr_ioapics; apic++) |
| if (mp_ioapics[apic].mpc_apicid == mp_irqs[i].mpc_dstapic || |
| mp_irqs[i].mpc_dstapic == MP_APIC_ALL) |
| break; |
| |
| if ((mp_bus_id_to_type[lbus] == MP_BUS_PCI) && |
| !mp_irqs[i].mpc_irqtype && |
| (bus == lbus) && |
| (slot == ((mp_irqs[i].mpc_srcbusirq >> 2) & 0x1f))) { |
| int irq = pin_2_irq(i,apic,mp_irqs[i].mpc_dstirq); |
| |
| if (!(apic || IO_APIC_IRQ(irq))) |
| continue; |
| |
| if (pin == (mp_irqs[i].mpc_srcbusirq & 3)) |
| return irq; |
| /* |
| * Use the first all-but-pin matching entry as a |
| * best-guess fuzzy result for broken mptables. |
| */ |
| if (best_guess < 0) |
| best_guess = irq; |
| } |
| } |
| return best_guess; |
| } |
| EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector); |
| |
| /* |
| * This function currently is only a helper for the i386 smp boot process where |
| * we need to reprogram the ioredtbls to cater for the cpus which have come online |
| * so mask in all cases should simply be TARGET_CPUS |
| */ |
| #ifdef CONFIG_SMP |
| void __init setup_ioapic_dest(void) |
| { |
| int pin, ioapic, irq, irq_entry; |
| |
| if (skip_ioapic_setup == 1) |
| return; |
| |
| for (ioapic = 0; ioapic < nr_ioapics; ioapic++) { |
| for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) { |
| irq_entry = find_irq_entry(ioapic, pin, mp_INT); |
| if (irq_entry == -1) |
| continue; |
| irq = pin_2_irq(irq_entry, ioapic, pin); |
| set_ioapic_affinity_irq(irq, TARGET_CPUS); |
| } |
| |
| } |
| } |
| #endif |
| |
| /* |
| * EISA Edge/Level control register, ELCR |
| */ |
| static int EISA_ELCR(unsigned int irq) |
| { |
| if (irq < 16) { |
| unsigned int port = 0x4d0 + (irq >> 3); |
| return (inb(port) >> (irq & 7)) & 1; |
| } |
| apic_printk(APIC_VERBOSE, KERN_INFO |
| "Broken MPtable reports ISA irq %d\n", irq); |
| return 0; |
| } |
| |
| /* EISA interrupts are always polarity zero and can be edge or level |
| * trigger depending on the ELCR value. If an interrupt is listed as |
| * EISA conforming in the MP table, that means its trigger type must |
| * be read in from the ELCR */ |
| |
| #define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mpc_srcbusirq)) |
| #define default_EISA_polarity(idx) (0) |
| |
| /* ISA interrupts are always polarity zero edge triggered, |
| * when listed as conforming in the MP table. */ |
| |
| #define default_ISA_trigger(idx) (0) |
| #define default_ISA_polarity(idx) (0) |
| |
| /* PCI interrupts are always polarity one level triggered, |
| * when listed as conforming in the MP table. */ |
| |
| #define default_PCI_trigger(idx) (1) |
| #define default_PCI_polarity(idx) (1) |
| |
| /* MCA interrupts are always polarity zero level triggered, |
| * when listed as conforming in the MP table. */ |
| |
| #define default_MCA_trigger(idx) (1) |
| #define default_MCA_polarity(idx) (0) |
| |
| /* NEC98 interrupts are always polarity zero edge triggered, |
| * when listed as conforming in the MP table. */ |
| |
| #define default_NEC98_trigger(idx) (0) |
| #define default_NEC98_polarity(idx) (0) |
| |
| static int __init MPBIOS_polarity(int idx) |
| { |
| int bus = mp_irqs[idx].mpc_srcbus; |
| int polarity; |
| |
| /* |
| * Determine IRQ line polarity (high active or low active): |
| */ |
| switch (mp_irqs[idx].mpc_irqflag & 3) |
| { |
| case 0: /* conforms, ie. bus-type dependent polarity */ |
| { |
| switch (mp_bus_id_to_type[bus]) |
| { |
| case MP_BUS_ISA: /* ISA pin */ |
| { |
| polarity = default_ISA_polarity(idx); |
| break; |
| } |
| case MP_BUS_EISA: /* EISA pin */ |
| { |
| polarity = default_EISA_polarity(idx); |
| break; |
| } |
| case MP_BUS_PCI: /* PCI pin */ |
| { |
| polarity = default_PCI_polarity(idx); |
| break; |
| } |
| case MP_BUS_MCA: /* MCA pin */ |
| { |
| polarity = default_MCA_polarity(idx); |
| break; |
| } |
| case MP_BUS_NEC98: /* NEC 98 pin */ |
| { |
| polarity = default_NEC98_polarity(idx); |
| break; |
| } |
| default: |
| { |
| printk(KERN_WARNING "broken BIOS!!\n"); |
| polarity = 1; |
| break; |
| } |
| } |
| break; |
| } |
| case 1: /* high active */ |
| { |
| polarity = 0; |
| break; |
| } |
| case 2: /* reserved */ |
| { |
| printk(KERN_WARNING "broken BIOS!!\n"); |
| polarity = 1; |
| break; |
| } |
| case 3: /* low active */ |
| { |
| polarity = 1; |
| break; |
| } |
| default: /* invalid */ |
| { |
| printk(KERN_WARNING "broken BIOS!!\n"); |
| polarity = 1; |
| break; |
| } |
| } |
| return polarity; |
| } |
| |
| static int MPBIOS_trigger(int idx) |
| { |
| int bus = mp_irqs[idx].mpc_srcbus; |
| int trigger; |
| |
| /* |
| * Determine IRQ trigger mode (edge or level sensitive): |
| */ |
| switch ((mp_irqs[idx].mpc_irqflag>>2) & 3) |
| { |
| case 0: /* conforms, ie. bus-type dependent */ |
| { |
| switch (mp_bus_id_to_type[bus]) |
| { |
| case MP_BUS_ISA: /* ISA pin */ |
| { |
| trigger = default_ISA_trigger(idx); |
| break; |
| } |
| case MP_BUS_EISA: /* EISA pin */ |
| { |
| trigger = default_EISA_trigger(idx); |
| break; |
| } |
| case MP_BUS_PCI: /* PCI pin */ |
| { |
| trigger = default_PCI_trigger(idx); |
| break; |
| } |
| case MP_BUS_MCA: /* MCA pin */ |
| { |
| trigger = default_MCA_trigger(idx); |
| break; |
| } |
| case MP_BUS_NEC98: /* NEC 98 pin */ |
| { |
| trigger = default_NEC98_trigger(idx); |
| break; |
| } |
| default: |
| { |
| printk(KERN_WARNING "broken BIOS!!\n"); |
| trigger = 1; |
| break; |
| } |
| } |
| break; |
| } |
| case 1: /* edge */ |
| { |
| trigger = 0; |
| break; |
| } |
| case 2: /* reserved */ |
| { |
| printk(KERN_WARNING "broken BIOS!!\n"); |
| trigger = 1; |
| break; |
| } |
| case 3: /* level */ |
| { |
| trigger = 1; |
| break; |
| } |
| default: /* invalid */ |
| { |
| printk(KERN_WARNING "broken BIOS!!\n"); |
| trigger = 0; |
| break; |
| } |
| } |
| return trigger; |
| } |
| |
| static inline int irq_polarity(int idx) |
| { |
| return MPBIOS_polarity(idx); |
| } |
| |
| static inline int irq_trigger(int idx) |
| { |
| return MPBIOS_trigger(idx); |
| } |
| |
| static int pin_2_irq(int idx, int apic, int pin) |
| { |
| int irq, i; |
| int bus = mp_irqs[idx].mpc_srcbus; |
| |
| /* |
| * Debugging check, we are in big trouble if this message pops up! |
| */ |
| if (mp_irqs[idx].mpc_dstirq != pin) |
| printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); |
| |
| switch (mp_bus_id_to_type[bus]) |
| { |
| case MP_BUS_ISA: /* ISA pin */ |
| case MP_BUS_EISA: |
| case MP_BUS_MCA: |
| case MP_BUS_NEC98: |
| { |
| irq = mp_irqs[idx].mpc_srcbusirq; |
| break; |
| } |
| case MP_BUS_PCI: /* PCI pin */ |
| { |
| /* |
| * PCI IRQs are mapped in order |
| */ |
| i = irq = 0; |
| while (i < apic) |
| irq += nr_ioapic_registers[i++]; |
| irq += pin; |
| |
| /* |
| * For MPS mode, so far only needed by ES7000 platform |
| */ |
| if (ioapic_renumber_irq) |
| irq = ioapic_renumber_irq(apic, irq); |
| |
| break; |
| } |
| default: |
| { |
| printk(KERN_ERR "unknown bus type %d.\n",bus); |
| irq = 0; |
| break; |
| } |
| } |
| |
| /* |
| * PCI IRQ command line redirection. Yes, limits are hardcoded. |
| */ |
| if ((pin >= 16) && (pin <= 23)) { |
| if (pirq_entries[pin-16] != -1) { |
| if (!pirq_entries[pin-16]) { |
| apic_printk(APIC_VERBOSE, KERN_DEBUG |
| "disabling PIRQ%d\n", pin-16); |
| } else { |
| irq = pirq_entries[pin-16]; |
| apic_printk(APIC_VERBOSE, KERN_DEBUG |
| "using PIRQ%d -> IRQ %d\n", |
| pin-16, irq); |
| } |
| } |
| } |
| return irq; |
| } |
| |
| static inline int IO_APIC_irq_trigger(int irq) |
| { |
| int apic, idx, pin; |
| |
| for (apic = 0; apic < nr_ioapics; apic++) { |
| for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { |
| idx = find_irq_entry(apic,pin,mp_INT); |
| if ((idx != -1) && (irq == pin_2_irq(idx,apic,pin))) |
| return irq_trigger(idx); |
| } |
| } |
| /* |
| * nonexistent IRQs are edge default |
| */ |
| return 0; |
| } |
| |
| /* irq_vectors is indexed by the sum of all RTEs in all I/O APICs. */ |
| u8 irq_vector[NR_IRQ_VECTORS] __read_mostly = { FIRST_DEVICE_VECTOR , 0 }; |
| |
| int assign_irq_vector(int irq) |
| { |
| static int current_vector = FIRST_DEVICE_VECTOR, offset = 0; |
| |
| BUG_ON(irq >= NR_IRQ_VECTORS); |
| if (irq != AUTO_ASSIGN && IO_APIC_VECTOR(irq) > 0) |
| return IO_APIC_VECTOR(irq); |
| next: |
| current_vector += 8; |
| if (current_vector == SYSCALL_VECTOR) |
| goto next; |
| |
| if (current_vector >= FIRST_SYSTEM_VECTOR) { |
| offset++; |
| if (!(offset%8)) |
| return -ENOSPC; |
| current_vector = FIRST_DEVICE_VECTOR + offset; |
| } |
| |
| vector_irq[current_vector] = irq; |
| if (irq != AUTO_ASSIGN) |
| IO_APIC_VECTOR(irq) = current_vector; |
| |
| return current_vector; |
| } |
| |
| static struct hw_interrupt_type ioapic_level_type; |
| static struct hw_interrupt_type ioapic_edge_type; |
| |
| #define IOAPIC_AUTO -1 |
| #define IOAPIC_EDGE 0 |
| #define IOAPIC_LEVEL 1 |
| |
| static inline void ioapic_register_intr(int irq, int vector, unsigned long trigger) |
| { |
| if (use_pci_vector() && !platform_legacy_irq(irq)) { |
| if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || |
| trigger == IOAPIC_LEVEL) |
| irq_desc[vector].handler = &ioapic_level_type; |
| else |
| irq_desc[vector].handler = &ioapic_edge_type; |
| set_intr_gate(vector, interrupt[vector]); |
| } else { |
| if ((trigger == IOAPIC_AUTO && IO_APIC_irq_trigger(irq)) || |
| trigger == IOAPIC_LEVEL) |
| irq_desc[irq].handler = &ioapic_level_type; |
| else |
| irq_desc[irq].handler = &ioapic_edge_type; |
| set_intr_gate(vector, interrupt[irq]); |
| } |
| } |
| |
| static void __init setup_IO_APIC_irqs(void) |
| { |
| struct IO_APIC_route_entry entry; |
| int apic, pin, idx, irq, first_notcon = 1, vector; |
| unsigned long flags; |
| |
| apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n"); |
| |
| for (apic = 0; apic < nr_ioapics; apic++) { |
| for (pin = 0; pin < nr_ioapic_registers[apic]; pin++) { |
| |
| /* |
| * add it to the IO-APIC irq-routing table: |
| */ |
| memset(&entry,0,sizeof(entry)); |
| |
| entry.delivery_mode = INT_DELIVERY_MODE; |
| entry.dest_mode = INT_DEST_MODE; |
| entry.mask = 0; /* enable IRQ */ |
| entry.dest.logical.logical_dest = |
| cpu_mask_to_apicid(TARGET_CPUS); |
| |
| idx = find_irq_entry(apic,pin,mp_INT); |
| if (idx == -1) { |
| if (first_notcon) { |
| apic_printk(APIC_VERBOSE, KERN_DEBUG |
| " IO-APIC (apicid-pin) %d-%d", |
| mp_ioapics[apic].mpc_apicid, |
| pin); |
| first_notcon = 0; |
| } else |
| apic_printk(APIC_VERBOSE, ", %d-%d", |
| mp_ioapics[apic].mpc_apicid, pin); |
| continue; |
| } |
| |
| entry.trigger = irq_trigger(idx); |
| entry.polarity = irq_polarity(idx); |
| |
| if (irq_trigger(idx)) { |
| entry.trigger = 1; |
| entry.mask = 1; |
| } |
| |
| irq = pin_2_irq(idx, apic, pin); |
| /* |
| * skip adding the timer int on secondary nodes, which causes |
| * a small but painful rift in the time-space continuum |
| */ |
| if (multi_timer_check(apic, irq)) |
| continue; |
| else |
| add_pin_to_irq(irq, apic, pin); |
| |
| if (!apic && !IO_APIC_IRQ(irq)) |
| continue; |
| |
| if (IO_APIC_IRQ(irq)) { |
| vector = assign_irq_vector(irq); |
| entry.vector = vector; |
| ioapic_register_intr(irq, vector, IOAPIC_AUTO); |
| |
| if (!apic && (irq < 16)) |
| disable_8259A_irq(irq); |
| } |
| spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(apic, 0x11+2*pin, *(((int *)&entry)+1)); |
| io_apic_write(apic, 0x10+2*pin, *(((int *)&entry)+0)); |
| set_native_irq_info(irq, TARGET_CPUS); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| } |
| |
| if (!first_notcon) |
| apic_printk(APIC_VERBOSE, " not connected.\n"); |
| } |
| |
| /* |
| * Set up the 8259A-master output pin: |
| */ |
| static void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector) |
| { |
| struct IO_APIC_route_entry entry; |
| unsigned long flags; |
| |
| memset(&entry,0,sizeof(entry)); |
| |
| disable_8259A_irq(0); |
| |
| /* mask LVT0 */ |
| apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); |
| |
| /* |
| * We use logical delivery to get the timer IRQ |
| * to the first CPU. |
| */ |
| entry.dest_mode = INT_DEST_MODE; |
| entry.mask = 0; /* unmask IRQ now */ |
| entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); |
| entry.delivery_mode = INT_DELIVERY_MODE; |
| entry.polarity = 0; |
| entry.trigger = 0; |
| entry.vector = vector; |
| |
| /* |
| * The timer IRQ doesn't have to know that behind the |
| * scene we have a 8259A-master in AEOI mode ... |
| */ |
| irq_desc[0].handler = &ioapic_edge_type; |
| |
| /* |
| * Add it to the IO-APIC irq-routing table: |
| */ |
| spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1)); |
| io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0)); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| enable_8259A_irq(0); |
| } |
| |
| static inline void UNEXPECTED_IO_APIC(void) |
| { |
| } |
| |
| void __init print_IO_APIC(void) |
| { |
| int apic, i; |
| union IO_APIC_reg_00 reg_00; |
| union IO_APIC_reg_01 reg_01; |
| union IO_APIC_reg_02 reg_02; |
| union IO_APIC_reg_03 reg_03; |
| unsigned long flags; |
| |
| if (apic_verbosity == APIC_QUIET) |
| return; |
| |
| printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); |
| for (i = 0; i < nr_ioapics; i++) |
| printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", |
| mp_ioapics[i].mpc_apicid, nr_ioapic_registers[i]); |
| |
| /* |
| * We are a bit conservative about what we expect. We have to |
| * know about every hardware change ASAP. |
| */ |
| printk(KERN_INFO "testing the IO APIC.......................\n"); |
| |
| for (apic = 0; apic < nr_ioapics; apic++) { |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| reg_00.raw = io_apic_read(apic, 0); |
| reg_01.raw = io_apic_read(apic, 1); |
| if (reg_01.bits.version >= 0x10) |
| reg_02.raw = io_apic_read(apic, 2); |
| if (reg_01.bits.version >= 0x20) |
| reg_03.raw = io_apic_read(apic, 3); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mpc_apicid); |
| printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); |
| printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); |
| printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); |
| printk(KERN_DEBUG "....... : LTS : %X\n", reg_00.bits.LTS); |
| if (reg_00.bits.ID >= get_physical_broadcast()) |
| UNEXPECTED_IO_APIC(); |
| if (reg_00.bits.__reserved_1 || reg_00.bits.__reserved_2) |
| UNEXPECTED_IO_APIC(); |
| |
| printk(KERN_DEBUG ".... register #01: %08X\n", reg_01.raw); |
| printk(KERN_DEBUG "....... : max redirection entries: %04X\n", reg_01.bits.entries); |
| if ( (reg_01.bits.entries != 0x0f) && /* older (Neptune) boards */ |
| (reg_01.bits.entries != 0x17) && /* typical ISA+PCI boards */ |
| (reg_01.bits.entries != 0x1b) && /* Compaq Proliant boards */ |
| (reg_01.bits.entries != 0x1f) && /* dual Xeon boards */ |
| (reg_01.bits.entries != 0x22) && /* bigger Xeon boards */ |
| (reg_01.bits.entries != 0x2E) && |
| (reg_01.bits.entries != 0x3F) |
| ) |
| UNEXPECTED_IO_APIC(); |
| |
| printk(KERN_DEBUG "....... : PRQ implemented: %X\n", reg_01.bits.PRQ); |
| printk(KERN_DEBUG "....... : IO APIC version: %04X\n", reg_01.bits.version); |
| if ( (reg_01.bits.version != 0x01) && /* 82489DX IO-APICs */ |
| (reg_01.bits.version != 0x10) && /* oldest IO-APICs */ |
| (reg_01.bits.version != 0x11) && /* Pentium/Pro IO-APICs */ |
| (reg_01.bits.version != 0x13) && /* Xeon IO-APICs */ |
| (reg_01.bits.version != 0x20) /* Intel P64H (82806 AA) */ |
| ) |
| UNEXPECTED_IO_APIC(); |
| if (reg_01.bits.__reserved_1 || reg_01.bits.__reserved_2) |
| UNEXPECTED_IO_APIC(); |
| |
| /* |
| * Some Intel chipsets with IO APIC VERSION of 0x1? don't have reg_02, |
| * but the value of reg_02 is read as the previous read register |
| * value, so ignore it if reg_02 == reg_01. |
| */ |
| if (reg_01.bits.version >= 0x10 && reg_02.raw != reg_01.raw) { |
| printk(KERN_DEBUG ".... register #02: %08X\n", reg_02.raw); |
| printk(KERN_DEBUG "....... : arbitration: %02X\n", reg_02.bits.arbitration); |
| if (reg_02.bits.__reserved_1 || reg_02.bits.__reserved_2) |
| UNEXPECTED_IO_APIC(); |
| } |
| |
| /* |
| * Some Intel chipsets with IO APIC VERSION of 0x2? don't have reg_02 |
| * or reg_03, but the value of reg_0[23] is read as the previous read |
| * register value, so ignore it if reg_03 == reg_0[12]. |
| */ |
| if (reg_01.bits.version >= 0x20 && reg_03.raw != reg_02.raw && |
| reg_03.raw != reg_01.raw) { |
| printk(KERN_DEBUG ".... register #03: %08X\n", reg_03.raw); |
| printk(KERN_DEBUG "....... : Boot DT : %X\n", reg_03.bits.boot_DT); |
| if (reg_03.bits.__reserved_1) |
| UNEXPECTED_IO_APIC(); |
| } |
| |
| printk(KERN_DEBUG ".... IRQ redirection table:\n"); |
| |
| printk(KERN_DEBUG " NR Log Phy Mask Trig IRR Pol" |
| " Stat Dest Deli Vect: \n"); |
| |
| for (i = 0; i <= reg_01.bits.entries; i++) { |
| struct IO_APIC_route_entry entry; |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| *(((int *)&entry)+0) = io_apic_read(apic, 0x10+i*2); |
| *(((int *)&entry)+1) = io_apic_read(apic, 0x11+i*2); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| printk(KERN_DEBUG " %02x %03X %02X ", |
| i, |
| entry.dest.logical.logical_dest, |
| entry.dest.physical.physical_dest |
| ); |
| |
| printk("%1d %1d %1d %1d %1d %1d %1d %02X\n", |
| entry.mask, |
| entry.trigger, |
| entry.irr, |
| entry.polarity, |
| entry.delivery_status, |
| entry.dest_mode, |
| entry.delivery_mode, |
| entry.vector |
| ); |
| } |
| } |
| if (use_pci_vector()) |
| printk(KERN_INFO "Using vector-based indexing\n"); |
| printk(KERN_DEBUG "IRQ to pin mappings:\n"); |
| for (i = 0; i < NR_IRQS; i++) { |
| struct irq_pin_list *entry = irq_2_pin + i; |
| if (entry->pin < 0) |
| continue; |
| if (use_pci_vector() && !platform_legacy_irq(i)) |
| printk(KERN_DEBUG "IRQ%d ", IO_APIC_VECTOR(i)); |
| else |
| printk(KERN_DEBUG "IRQ%d ", i); |
| for (;;) { |
| printk("-> %d:%d", entry->apic, entry->pin); |
| if (!entry->next) |
| break; |
| entry = irq_2_pin + entry->next; |
| } |
| printk("\n"); |
| } |
| |
| printk(KERN_INFO ".................................... done.\n"); |
| |
| return; |
| } |
| |
| #if 0 |
| |
| static void print_APIC_bitfield (int base) |
| { |
| unsigned int v; |
| int i, j; |
| |
| if (apic_verbosity == APIC_QUIET) |
| return; |
| |
| printk(KERN_DEBUG "0123456789abcdef0123456789abcdef\n" KERN_DEBUG); |
| for (i = 0; i < 8; i++) { |
| v = apic_read(base + i*0x10); |
| for (j = 0; j < 32; j++) { |
| if (v & (1<<j)) |
| printk("1"); |
| else |
| printk("0"); |
| } |
| printk("\n"); |
| } |
| } |
| |
| void /*__init*/ print_local_APIC(void * dummy) |
| { |
| unsigned int v, ver, maxlvt; |
| |
| if (apic_verbosity == APIC_QUIET) |
| return; |
| |
| printk("\n" KERN_DEBUG "printing local APIC contents on CPU#%d/%d:\n", |
| smp_processor_id(), hard_smp_processor_id()); |
| v = apic_read(APIC_ID); |
| printk(KERN_INFO "... APIC ID: %08x (%01x)\n", v, GET_APIC_ID(v)); |
| v = apic_read(APIC_LVR); |
| printk(KERN_INFO "... APIC VERSION: %08x\n", v); |
| ver = GET_APIC_VERSION(v); |
| maxlvt = get_maxlvt(); |
| |
| v = apic_read(APIC_TASKPRI); |
| printk(KERN_DEBUG "... APIC TASKPRI: %08x (%02x)\n", v, v & APIC_TPRI_MASK); |
| |
| if (APIC_INTEGRATED(ver)) { /* !82489DX */ |
| v = apic_read(APIC_ARBPRI); |
| printk(KERN_DEBUG "... APIC ARBPRI: %08x (%02x)\n", v, |
| v & APIC_ARBPRI_MASK); |
| v = apic_read(APIC_PROCPRI); |
| printk(KERN_DEBUG "... APIC PROCPRI: %08x\n", v); |
| } |
| |
| v = apic_read(APIC_EOI); |
| printk(KERN_DEBUG "... APIC EOI: %08x\n", v); |
| v = apic_read(APIC_RRR); |
| printk(KERN_DEBUG "... APIC RRR: %08x\n", v); |
| v = apic_read(APIC_LDR); |
| printk(KERN_DEBUG "... APIC LDR: %08x\n", v); |
| v = apic_read(APIC_DFR); |
| printk(KERN_DEBUG "... APIC DFR: %08x\n", v); |
| v = apic_read(APIC_SPIV); |
| printk(KERN_DEBUG "... APIC SPIV: %08x\n", v); |
| |
| printk(KERN_DEBUG "... APIC ISR field:\n"); |
| print_APIC_bitfield(APIC_ISR); |
| printk(KERN_DEBUG "... APIC TMR field:\n"); |
| print_APIC_bitfield(APIC_TMR); |
| printk(KERN_DEBUG "... APIC IRR field:\n"); |
| print_APIC_bitfield(APIC_IRR); |
| |
| if (APIC_INTEGRATED(ver)) { /* !82489DX */ |
| if (maxlvt > 3) /* Due to the Pentium erratum 3AP. */ |
| apic_write(APIC_ESR, 0); |
| v = apic_read(APIC_ESR); |
| printk(KERN_DEBUG "... APIC ESR: %08x\n", v); |
| } |
| |
| v = apic_read(APIC_ICR); |
| printk(KERN_DEBUG "... APIC ICR: %08x\n", v); |
| v = apic_read(APIC_ICR2); |
| printk(KERN_DEBUG "... APIC ICR2: %08x\n", v); |
| |
| v = apic_read(APIC_LVTT); |
| printk(KERN_DEBUG "... APIC LVTT: %08x\n", v); |
| |
| if (maxlvt > 3) { /* PC is LVT#4. */ |
| v = apic_read(APIC_LVTPC); |
| printk(KERN_DEBUG "... APIC LVTPC: %08x\n", v); |
| } |
| v = apic_read(APIC_LVT0); |
| printk(KERN_DEBUG "... APIC LVT0: %08x\n", v); |
| v = apic_read(APIC_LVT1); |
| printk(KERN_DEBUG "... APIC LVT1: %08x\n", v); |
| |
| if (maxlvt > 2) { /* ERR is LVT#3. */ |
| v = apic_read(APIC_LVTERR); |
| printk(KERN_DEBUG "... APIC LVTERR: %08x\n", v); |
| } |
| |
| v = apic_read(APIC_TMICT); |
| printk(KERN_DEBUG "... APIC TMICT: %08x\n", v); |
| v = apic_read(APIC_TMCCT); |
| printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v); |
| v = apic_read(APIC_TDCR); |
| printk(KERN_DEBUG "... APIC TDCR: %08x\n", v); |
| printk("\n"); |
| } |
| |
| void print_all_local_APICs (void) |
| { |
| on_each_cpu(print_local_APIC, NULL, 1, 1); |
| } |
| |
| void /*__init*/ print_PIC(void) |
| { |
| unsigned int v; |
| unsigned long flags; |
| |
| if (apic_verbosity == APIC_QUIET) |
| return; |
| |
| printk(KERN_DEBUG "\nprinting PIC contents\n"); |
| |
| spin_lock_irqsave(&i8259A_lock, flags); |
| |
| v = inb(0xa1) << 8 | inb(0x21); |
| printk(KERN_DEBUG "... PIC IMR: %04x\n", v); |
| |
| v = inb(0xa0) << 8 | inb(0x20); |
| printk(KERN_DEBUG "... PIC IRR: %04x\n", v); |
| |
| outb(0x0b,0xa0); |
| outb(0x0b,0x20); |
| v = inb(0xa0) << 8 | inb(0x20); |
| outb(0x0a,0xa0); |
| outb(0x0a,0x20); |
| |
| spin_unlock_irqrestore(&i8259A_lock, flags); |
| |
| printk(KERN_DEBUG "... PIC ISR: %04x\n", v); |
| |
| v = inb(0x4d1) << 8 | inb(0x4d0); |
| printk(KERN_DEBUG "... PIC ELCR: %04x\n", v); |
| } |
| |
| #endif /* 0 */ |
| |
| static void __init enable_IO_APIC(void) |
| { |
| union IO_APIC_reg_01 reg_01; |
| int i; |
| unsigned long flags; |
| |
| for (i = 0; i < PIN_MAP_SIZE; i++) { |
| irq_2_pin[i].pin = -1; |
| irq_2_pin[i].next = 0; |
| } |
| if (!pirqs_enabled) |
| for (i = 0; i < MAX_PIRQS; i++) |
| pirq_entries[i] = -1; |
| |
| /* |
| * The number of IO-APIC IRQ registers (== #pins): |
| */ |
| for (i = 0; i < nr_ioapics; i++) { |
| spin_lock_irqsave(&ioapic_lock, flags); |
| reg_01.raw = io_apic_read(i, 1); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| nr_ioapic_registers[i] = reg_01.bits.entries+1; |
| } |
| |
| /* |
| * Do not trust the IO-APIC being empty at bootup |
| */ |
| clear_IO_APIC(); |
| } |
| |
| /* |
| * Not an __init, needed by the reboot code |
| */ |
| void disable_IO_APIC(void) |
| { |
| int pin; |
| /* |
| * Clear the IO-APIC before rebooting: |
| */ |
| clear_IO_APIC(); |
| |
| /* |
| * If the i8259 is routed through an IOAPIC |
| * Put that IOAPIC in virtual wire mode |
| * so legacy interrupts can be delivered. |
| */ |
| pin = find_isa_irq_pin(0, mp_ExtINT); |
| if (pin != -1) { |
| struct IO_APIC_route_entry entry; |
| unsigned long flags; |
| |
| memset(&entry, 0, sizeof(entry)); |
| entry.mask = 0; /* Enabled */ |
| entry.trigger = 0; /* Edge */ |
| entry.irr = 0; |
| entry.polarity = 0; /* High */ |
| entry.delivery_status = 0; |
| entry.dest_mode = 0; /* Physical */ |
| entry.delivery_mode = 7; /* ExtInt */ |
| entry.vector = 0; |
| entry.dest.physical.physical_dest = 0; |
| |
| |
| /* |
| * Add it to the IO-APIC irq-routing table: |
| */ |
| spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(0, 0x11+2*pin, *(((int *)&entry)+1)); |
| io_apic_write(0, 0x10+2*pin, *(((int *)&entry)+0)); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| disconnect_bsp_APIC(pin != -1); |
| } |
| |
| /* |
| * function to set the IO-APIC physical IDs based on the |
| * values stored in the MPC table. |
| * |
| * by Matt Domsch <Matt_Domsch@dell.com> Tue Dec 21 12:25:05 CST 1999 |
| */ |
| |
| #ifndef CONFIG_X86_NUMAQ |
| static void __init setup_ioapic_ids_from_mpc(void) |
| { |
| union IO_APIC_reg_00 reg_00; |
| physid_mask_t phys_id_present_map; |
| int apic; |
| int i; |
| unsigned char old_id; |
| unsigned long flags; |
| |
| /* |
| * Don't check I/O APIC IDs for xAPIC systems. They have |
| * no meaning without the serial APIC bus. |
| */ |
| if (!(boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && boot_cpu_data.x86 < 15)) |
| return; |
| /* |
| * This is broken; anything with a real cpu count has to |
| * circumvent this idiocy regardless. |
| */ |
| phys_id_present_map = ioapic_phys_id_map(phys_cpu_present_map); |
| |
| /* |
| * Set the IOAPIC ID to the value stored in the MPC table. |
| */ |
| for (apic = 0; apic < nr_ioapics; apic++) { |
| |
| /* Read the register 0 value */ |
| spin_lock_irqsave(&ioapic_lock, flags); |
| reg_00.raw = io_apic_read(apic, 0); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| old_id = mp_ioapics[apic].mpc_apicid; |
| |
| if (mp_ioapics[apic].mpc_apicid >= get_physical_broadcast()) { |
| printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", |
| apic, mp_ioapics[apic].mpc_apicid); |
| printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", |
| reg_00.bits.ID); |
| mp_ioapics[apic].mpc_apicid = reg_00.bits.ID; |
| } |
| |
| /* |
| * Sanity check, is the ID really free? Every APIC in a |
| * system must have a unique ID or we get lots of nice |
| * 'stuck on smp_invalidate_needed IPI wait' messages. |
| */ |
| if (check_apicid_used(phys_id_present_map, |
| mp_ioapics[apic].mpc_apicid)) { |
| printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", |
| apic, mp_ioapics[apic].mpc_apicid); |
| for (i = 0; i < get_physical_broadcast(); i++) |
| if (!physid_isset(i, phys_id_present_map)) |
| break; |
| if (i >= get_physical_broadcast()) |
| panic("Max APIC ID exceeded!\n"); |
| printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", |
| i); |
| physid_set(i, phys_id_present_map); |
| mp_ioapics[apic].mpc_apicid = i; |
| } else { |
| physid_mask_t tmp; |
| tmp = apicid_to_cpu_present(mp_ioapics[apic].mpc_apicid); |
| apic_printk(APIC_VERBOSE, "Setting %d in the " |
| "phys_id_present_map\n", |
| mp_ioapics[apic].mpc_apicid); |
| physids_or(phys_id_present_map, phys_id_present_map, tmp); |
| } |
| |
| |
| /* |
| * We need to adjust the IRQ routing table |
| * if the ID changed. |
| */ |
| if (old_id != mp_ioapics[apic].mpc_apicid) |
| for (i = 0; i < mp_irq_entries; i++) |
| if (mp_irqs[i].mpc_dstapic == old_id) |
| mp_irqs[i].mpc_dstapic |
| = mp_ioapics[apic].mpc_apicid; |
| |
| /* |
| * Read the right value from the MPC table and |
| * write it into the ID register. |
| */ |
| apic_printk(APIC_VERBOSE, KERN_INFO |
| "...changing IO-APIC physical APIC ID to %d ...", |
| mp_ioapics[apic].mpc_apicid); |
| |
| reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; |
| spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(apic, 0, reg_00.raw); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| /* |
| * Sanity check |
| */ |
| spin_lock_irqsave(&ioapic_lock, flags); |
| reg_00.raw = io_apic_read(apic, 0); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) |
| printk("could not set ID!\n"); |
| else |
| apic_printk(APIC_VERBOSE, " ok.\n"); |
| } |
| } |
| #else |
| static void __init setup_ioapic_ids_from_mpc(void) { } |
| #endif |
| |
| /* |
| * There is a nasty bug in some older SMP boards, their mptable lies |
| * about the timer IRQ. We do the following to work around the situation: |
| * |
| * - timer IRQ defaults to IO-APIC IRQ |
| * - if this function detects that timer IRQs are defunct, then we fall |
| * back to ISA timer IRQs |
| */ |
| static int __init timer_irq_works(void) |
| { |
| unsigned long t1 = jiffies; |
| |
| local_irq_enable(); |
| /* Let ten ticks pass... */ |
| mdelay((10 * 1000) / HZ); |
| |
| /* |
| * Expect a few ticks at least, to be sure some possible |
| * glue logic does not lock up after one or two first |
| * ticks in a non-ExtINT mode. Also the local APIC |
| * might have cached one ExtINT interrupt. Finally, at |
| * least one tick may be lost due to delays. |
| */ |
| if (jiffies - t1 > 4) |
| return 1; |
| |
| return 0; |
| } |
| |
| /* |
| * In the SMP+IOAPIC case it might happen that there are an unspecified |
| * number of pending IRQ events unhandled. These cases are very rare, |
| * so we 'resend' these IRQs via IPIs, to the same CPU. It's much |
| * better to do it this way as thus we do not have to be aware of |
| * 'pending' interrupts in the IRQ path, except at this point. |
| */ |
| /* |
| * Edge triggered needs to resend any interrupt |
| * that was delayed but this is now handled in the device |
| * independent code. |
| */ |
| |
| /* |
| * Starting up a edge-triggered IO-APIC interrupt is |
| * nasty - we need to make sure that we get the edge. |
| * If it is already asserted for some reason, we need |
| * return 1 to indicate that is was pending. |
| * |
| * This is not complete - we should be able to fake |
| * an edge even if it isn't on the 8259A... |
| */ |
| static unsigned int startup_edge_ioapic_irq(unsigned int irq) |
| { |
| int was_pending = 0; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| if (irq < 16) { |
| disable_8259A_irq(irq); |
| if (i8259A_irq_pending(irq)) |
| was_pending = 1; |
| } |
| __unmask_IO_APIC_irq(irq); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| return was_pending; |
| } |
| |
| /* |
| * Once we have recorded IRQ_PENDING already, we can mask the |
| * interrupt for real. This prevents IRQ storms from unhandled |
| * devices. |
| */ |
| static void ack_edge_ioapic_irq(unsigned int irq) |
| { |
| move_irq(irq); |
| if ((irq_desc[irq].status & (IRQ_PENDING | IRQ_DISABLED)) |
| == (IRQ_PENDING | IRQ_DISABLED)) |
| mask_IO_APIC_irq(irq); |
| ack_APIC_irq(); |
| } |
| |
| /* |
| * Level triggered interrupts can just be masked, |
| * and shutting down and starting up the interrupt |
| * is the same as enabling and disabling them -- except |
| * with a startup need to return a "was pending" value. |
| * |
| * Level triggered interrupts are special because we |
| * do not touch any IO-APIC register while handling |
| * them. We ack the APIC in the end-IRQ handler, not |
| * in the start-IRQ-handler. Protection against reentrance |
| * from the same interrupt is still provided, both by the |
| * generic IRQ layer and by the fact that an unacked local |
| * APIC does not accept IRQs. |
| */ |
| static unsigned int startup_level_ioapic_irq (unsigned int irq) |
| { |
| unmask_IO_APIC_irq(irq); |
| |
| return 0; /* don't check for pending */ |
| } |
| |
| static void end_level_ioapic_irq (unsigned int irq) |
| { |
| unsigned long v; |
| int i; |
| |
| move_irq(irq); |
| /* |
| * It appears there is an erratum which affects at least version 0x11 |
| * of I/O APIC (that's the 82093AA and cores integrated into various |
| * chipsets). Under certain conditions a level-triggered interrupt is |
| * erroneously delivered as edge-triggered one but the respective IRR |
| * bit gets set nevertheless. As a result the I/O unit expects an EOI |
| * message but it will never arrive and further interrupts are blocked |
| * from the source. The exact reason is so far unknown, but the |
| * phenomenon was observed when two consecutive interrupt requests |
| * from a given source get delivered to the same CPU and the source is |
| * temporarily disabled in between. |
| * |
| * A workaround is to simulate an EOI message manually. We achieve it |
| * by setting the trigger mode to edge and then to level when the edge |
| * trigger mode gets detected in the TMR of a local APIC for a |
| * level-triggered interrupt. We mask the source for the time of the |
| * operation to prevent an edge-triggered interrupt escaping meanwhile. |
| * The idea is from Manfred Spraul. --macro |
| */ |
| i = IO_APIC_VECTOR(irq); |
| |
| v = apic_read(APIC_TMR + ((i & ~0x1f) >> 1)); |
| |
| ack_APIC_irq(); |
| |
| if (!(v & (1 << (i & 0x1f)))) { |
| atomic_inc(&irq_mis_count); |
| spin_lock(&ioapic_lock); |
| __mask_and_edge_IO_APIC_irq(irq); |
| __unmask_and_level_IO_APIC_irq(irq); |
| spin_unlock(&ioapic_lock); |
| } |
| } |
| |
| #ifdef CONFIG_PCI_MSI |
| static unsigned int startup_edge_ioapic_vector(unsigned int vector) |
| { |
| int irq = vector_to_irq(vector); |
| |
| return startup_edge_ioapic_irq(irq); |
| } |
| |
| static void ack_edge_ioapic_vector(unsigned int vector) |
| { |
| int irq = vector_to_irq(vector); |
| |
| move_irq(vector); |
| ack_edge_ioapic_irq(irq); |
| } |
| |
| static unsigned int startup_level_ioapic_vector (unsigned int vector) |
| { |
| int irq = vector_to_irq(vector); |
| |
| return startup_level_ioapic_irq (irq); |
| } |
| |
| static void end_level_ioapic_vector (unsigned int vector) |
| { |
| int irq = vector_to_irq(vector); |
| |
| move_irq(vector); |
| end_level_ioapic_irq(irq); |
| } |
| |
| static void mask_IO_APIC_vector (unsigned int vector) |
| { |
| int irq = vector_to_irq(vector); |
| |
| mask_IO_APIC_irq(irq); |
| } |
| |
| static void unmask_IO_APIC_vector (unsigned int vector) |
| { |
| int irq = vector_to_irq(vector); |
| |
| unmask_IO_APIC_irq(irq); |
| } |
| |
| #ifdef CONFIG_SMP |
| static void set_ioapic_affinity_vector (unsigned int vector, |
| cpumask_t cpu_mask) |
| { |
| int irq = vector_to_irq(vector); |
| |
| set_native_irq_info(vector, cpu_mask); |
| set_ioapic_affinity_irq(irq, cpu_mask); |
| } |
| #endif |
| #endif |
| |
| /* |
| * Level and edge triggered IO-APIC interrupts need different handling, |
| * so we use two separate IRQ descriptors. Edge triggered IRQs can be |
| * handled with the level-triggered descriptor, but that one has slightly |
| * more overhead. Level-triggered interrupts cannot be handled with the |
| * edge-triggered handler, without risking IRQ storms and other ugly |
| * races. |
| */ |
| static struct hw_interrupt_type ioapic_edge_type __read_mostly = { |
| .typename = "IO-APIC-edge", |
| .startup = startup_edge_ioapic, |
| .shutdown = shutdown_edge_ioapic, |
| .enable = enable_edge_ioapic, |
| .disable = disable_edge_ioapic, |
| .ack = ack_edge_ioapic, |
| .end = end_edge_ioapic, |
| #ifdef CONFIG_SMP |
| .set_affinity = set_ioapic_affinity, |
| #endif |
| }; |
| |
| static struct hw_interrupt_type ioapic_level_type __read_mostly = { |
| .typename = "IO-APIC-level", |
| .startup = startup_level_ioapic, |
| .shutdown = shutdown_level_ioapic, |
| .enable = enable_level_ioapic, |
| .disable = disable_level_ioapic, |
| .ack = mask_and_ack_level_ioapic, |
| .end = end_level_ioapic, |
| #ifdef CONFIG_SMP |
| .set_affinity = set_ioapic_affinity, |
| #endif |
| }; |
| |
| static inline void init_IO_APIC_traps(void) |
| { |
| int irq; |
| |
| /* |
| * NOTE! The local APIC isn't very good at handling |
| * multiple interrupts at the same interrupt level. |
| * As the interrupt level is determined by taking the |
| * vector number and shifting that right by 4, we |
| * want to spread these out a bit so that they don't |
| * all fall in the same interrupt level. |
| * |
| * Also, we've got to be careful not to trash gate |
| * 0x80, because int 0x80 is hm, kind of importantish. ;) |
| */ |
| for (irq = 0; irq < NR_IRQS ; irq++) { |
| int tmp = irq; |
| if (use_pci_vector()) { |
| if (!platform_legacy_irq(tmp)) |
| if ((tmp = vector_to_irq(tmp)) == -1) |
| continue; |
| } |
| if (IO_APIC_IRQ(tmp) && !IO_APIC_VECTOR(tmp)) { |
| /* |
| * Hmm.. We don't have an entry for this, |
| * so default to an old-fashioned 8259 |
| * interrupt if we can.. |
| */ |
| if (irq < 16) |
| make_8259A_irq(irq); |
| else |
| /* Strange. Oh, well.. */ |
| irq_desc[irq].handler = &no_irq_type; |
| } |
| } |
| } |
| |
| static void enable_lapic_irq (unsigned int irq) |
| { |
| unsigned long v; |
| |
| v = apic_read(APIC_LVT0); |
| apic_write_around(APIC_LVT0, v & ~APIC_LVT_MASKED); |
| } |
| |
| static void disable_lapic_irq (unsigned int irq) |
| { |
| unsigned long v; |
| |
| v = apic_read(APIC_LVT0); |
| apic_write_around(APIC_LVT0, v | APIC_LVT_MASKED); |
| } |
| |
| static void ack_lapic_irq (unsigned int irq) |
| { |
| ack_APIC_irq(); |
| } |
| |
| static void end_lapic_irq (unsigned int i) { /* nothing */ } |
| |
| static struct hw_interrupt_type lapic_irq_type __read_mostly = { |
| .typename = "local-APIC-edge", |
| .startup = NULL, /* startup_irq() not used for IRQ0 */ |
| .shutdown = NULL, /* shutdown_irq() not used for IRQ0 */ |
| .enable = enable_lapic_irq, |
| .disable = disable_lapic_irq, |
| .ack = ack_lapic_irq, |
| .end = end_lapic_irq |
| }; |
| |
| static void setup_nmi (void) |
| { |
| /* |
| * Dirty trick to enable the NMI watchdog ... |
| * We put the 8259A master into AEOI mode and |
| * unmask on all local APICs LVT0 as NMI. |
| * |
| * The idea to use the 8259A in AEOI mode ('8259A Virtual Wire') |
| * is from Maciej W. Rozycki - so we do not have to EOI from |
| * the NMI handler or the timer interrupt. |
| */ |
| apic_printk(APIC_VERBOSE, KERN_INFO "activating NMI Watchdog ..."); |
| |
| on_each_cpu(enable_NMI_through_LVT0, NULL, 1, 1); |
| |
| apic_printk(APIC_VERBOSE, " done.\n"); |
| } |
| |
| /* |
| * This looks a bit hackish but it's about the only one way of sending |
| * a few INTA cycles to 8259As and any associated glue logic. ICR does |
| * not support the ExtINT mode, unfortunately. We need to send these |
| * cycles as some i82489DX-based boards have glue logic that keeps the |
| * 8259A interrupt line asserted until INTA. --macro |
| */ |
| static inline void unlock_ExtINT_logic(void) |
| { |
| int pin, i; |
| struct IO_APIC_route_entry entry0, entry1; |
| unsigned char save_control, save_freq_select; |
| unsigned long flags; |
| |
| pin = find_isa_irq_pin(8, mp_INT); |
| if (pin == -1) |
| return; |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| *(((int *)&entry0) + 1) = io_apic_read(0, 0x11 + 2 * pin); |
| *(((int *)&entry0) + 0) = io_apic_read(0, 0x10 + 2 * pin); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| clear_IO_APIC_pin(0, pin); |
| |
| memset(&entry1, 0, sizeof(entry1)); |
| |
| entry1.dest_mode = 0; /* physical delivery */ |
| entry1.mask = 0; /* unmask IRQ now */ |
| entry1.dest.physical.physical_dest = hard_smp_processor_id(); |
| entry1.delivery_mode = dest_ExtINT; |
| entry1.polarity = entry0.polarity; |
| entry1.trigger = 0; |
| entry1.vector = 0; |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry1) + 1)); |
| io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry1) + 0)); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| save_control = CMOS_READ(RTC_CONTROL); |
| save_freq_select = CMOS_READ(RTC_FREQ_SELECT); |
| CMOS_WRITE((save_freq_select & ~RTC_RATE_SELECT) | 0x6, |
| RTC_FREQ_SELECT); |
| CMOS_WRITE(save_control | RTC_PIE, RTC_CONTROL); |
| |
| i = 100; |
| while (i-- > 0) { |
| mdelay(10); |
| if ((CMOS_READ(RTC_INTR_FLAGS) & RTC_PF) == RTC_PF) |
| i -= 10; |
| } |
| |
| CMOS_WRITE(save_control, RTC_CONTROL); |
| CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); |
| clear_IO_APIC_pin(0, pin); |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(0, 0x11 + 2 * pin, *(((int *)&entry0) + 1)); |
| io_apic_write(0, 0x10 + 2 * pin, *(((int *)&entry0) + 0)); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| } |
| |
| /* |
| * This code may look a bit paranoid, but it's supposed to cooperate with |
| * a wide range of boards and BIOS bugs. Fortunately only the timer IRQ |
| * is so screwy. Thanks to Brian Perkins for testing/hacking this beast |
| * fanatically on his truly buggy board. |
| */ |
| static inline void check_timer(void) |
| { |
| int pin1, pin2; |
| int vector; |
| |
| /* |
| * get/set the timer IRQ vector: |
| */ |
| disable_8259A_irq(0); |
| vector = assign_irq_vector(0); |
| set_intr_gate(vector, interrupt[0]); |
| |
| /* |
| * Subtle, code in do_timer_interrupt() expects an AEOI |
| * mode for the 8259A whenever interrupts are routed |
| * through I/O APICs. Also IRQ0 has to be enabled in |
| * the 8259A which implies the virtual wire has to be |
| * disabled in the local APIC. |
| */ |
| apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); |
| init_8259A(1); |
| timer_ack = 1; |
| enable_8259A_irq(0); |
| |
| pin1 = find_isa_irq_pin(0, mp_INT); |
| pin2 = find_isa_irq_pin(0, mp_ExtINT); |
| |
| printk(KERN_INFO "..TIMER: vector=0x%02X pin1=%d pin2=%d\n", vector, pin1, pin2); |
| |
| if (pin1 != -1) { |
| /* |
| * Ok, does IRQ0 through the IOAPIC work? |
| */ |
| unmask_IO_APIC_irq(0); |
| if (timer_irq_works()) { |
| if (nmi_watchdog == NMI_IO_APIC) { |
| disable_8259A_irq(0); |
| setup_nmi(); |
| enable_8259A_irq(0); |
| } |
| if (disable_timer_pin_1 > 0) |
| clear_IO_APIC_pin(0, pin1); |
| return; |
| } |
| clear_IO_APIC_pin(0, pin1); |
| printk(KERN_ERR "..MP-BIOS bug: 8254 timer not connected to IO-APIC\n"); |
| } |
| |
| printk(KERN_INFO "...trying to set up timer (IRQ0) through the 8259A ... "); |
| if (pin2 != -1) { |
| printk("\n..... (found pin %d) ...", pin2); |
| /* |
| * legacy devices should be connected to IO APIC #0 |
| */ |
| setup_ExtINT_IRQ0_pin(pin2, vector); |
| if (timer_irq_works()) { |
| printk("works.\n"); |
| if (pin1 != -1) |
| replace_pin_at_irq(0, 0, pin1, 0, pin2); |
| else |
| add_pin_to_irq(0, 0, pin2); |
| if (nmi_watchdog == NMI_IO_APIC) { |
| setup_nmi(); |
| } |
| return; |
| } |
| /* |
| * Cleanup, just in case ... |
| */ |
| clear_IO_APIC_pin(0, pin2); |
| } |
| printk(" failed.\n"); |
| |
| if (nmi_watchdog == NMI_IO_APIC) { |
| printk(KERN_WARNING "timer doesn't work through the IO-APIC - disabling NMI Watchdog!\n"); |
| nmi_watchdog = 0; |
| } |
| |
| printk(KERN_INFO "...trying to set up timer as Virtual Wire IRQ..."); |
| |
| disable_8259A_irq(0); |
| irq_desc[0].handler = &lapic_irq_type; |
| apic_write_around(APIC_LVT0, APIC_DM_FIXED | vector); /* Fixed mode */ |
| enable_8259A_irq(0); |
| |
| if (timer_irq_works()) { |
| printk(" works.\n"); |
| return; |
| } |
| apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_FIXED | vector); |
| printk(" failed.\n"); |
| |
| printk(KERN_INFO "...trying to set up timer as ExtINT IRQ..."); |
| |
| timer_ack = 0; |
| init_8259A(0); |
| make_8259A_irq(0); |
| apic_write_around(APIC_LVT0, APIC_DM_EXTINT); |
| |
| unlock_ExtINT_logic(); |
| |
| if (timer_irq_works()) { |
| printk(" works.\n"); |
| return; |
| } |
| printk(" failed :(.\n"); |
| panic("IO-APIC + timer doesn't work! Boot with apic=debug and send a " |
| "report. Then try booting with the 'noapic' option"); |
| } |
| |
| /* |
| * |
| * IRQ's that are handled by the PIC in the MPS IOAPIC case. |
| * - IRQ2 is the cascade IRQ, and cannot be a io-apic IRQ. |
| * Linux doesn't really care, as it's not actually used |
| * for any interrupt handling anyway. |
| */ |
| #define PIC_IRQS (1 << PIC_CASCADE_IR) |
| |
| void __init setup_IO_APIC(void) |
| { |
| enable_IO_APIC(); |
| |
| if (acpi_ioapic) |
| io_apic_irqs = ~0; /* all IRQs go through IOAPIC */ |
| else |
| io_apic_irqs = ~PIC_IRQS; |
| |
| printk("ENABLING IO-APIC IRQs\n"); |
| |
| /* |
| * Set up IO-APIC IRQ routing. |
| */ |
| if (!acpi_ioapic) |
| setup_ioapic_ids_from_mpc(); |
| sync_Arb_IDs(); |
| setup_IO_APIC_irqs(); |
| init_IO_APIC_traps(); |
| check_timer(); |
| if (!acpi_ioapic) |
| print_IO_APIC(); |
| } |
| |
| /* |
| * Called after all the initialization is done. If we didnt find any |
| * APIC bugs then we can allow the modify fast path |
| */ |
| |
| static int __init io_apic_bug_finalize(void) |
| { |
| if(sis_apic_bug == -1) |
| sis_apic_bug = 0; |
| return 0; |
| } |
| |
| late_initcall(io_apic_bug_finalize); |
| |
| struct sysfs_ioapic_data { |
| struct sys_device dev; |
| struct IO_APIC_route_entry entry[0]; |
| }; |
| static struct sysfs_ioapic_data * mp_ioapic_data[MAX_IO_APICS]; |
| |
| static int ioapic_suspend(struct sys_device *dev, pm_message_t state) |
| { |
| struct IO_APIC_route_entry *entry; |
| struct sysfs_ioapic_data *data; |
| unsigned long flags; |
| int i; |
| |
| data = container_of(dev, struct sysfs_ioapic_data, dev); |
| entry = data->entry; |
| spin_lock_irqsave(&ioapic_lock, flags); |
| for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { |
| *(((int *)entry) + 1) = io_apic_read(dev->id, 0x11 + 2 * i); |
| *(((int *)entry) + 0) = io_apic_read(dev->id, 0x10 + 2 * i); |
| } |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| return 0; |
| } |
| |
| static int ioapic_resume(struct sys_device *dev) |
| { |
| struct IO_APIC_route_entry *entry; |
| struct sysfs_ioapic_data *data; |
| unsigned long flags; |
| union IO_APIC_reg_00 reg_00; |
| int i; |
| |
| data = container_of(dev, struct sysfs_ioapic_data, dev); |
| entry = data->entry; |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| reg_00.raw = io_apic_read(dev->id, 0); |
| if (reg_00.bits.ID != mp_ioapics[dev->id].mpc_apicid) { |
| reg_00.bits.ID = mp_ioapics[dev->id].mpc_apicid; |
| io_apic_write(dev->id, 0, reg_00.raw); |
| } |
| for (i = 0; i < nr_ioapic_registers[dev->id]; i ++, entry ++ ) { |
| io_apic_write(dev->id, 0x11+2*i, *(((int *)entry)+1)); |
| io_apic_write(dev->id, 0x10+2*i, *(((int *)entry)+0)); |
| } |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| return 0; |
| } |
| |
| static struct sysdev_class ioapic_sysdev_class = { |
| set_kset_name("ioapic"), |
| .suspend = ioapic_suspend, |
| .resume = ioapic_resume, |
| }; |
| |
| static int __init ioapic_init_sysfs(void) |
| { |
| struct sys_device * dev; |
| int i, size, error = 0; |
| |
| error = sysdev_class_register(&ioapic_sysdev_class); |
| if (error) |
| return error; |
| |
| for (i = 0; i < nr_ioapics; i++ ) { |
| size = sizeof(struct sys_device) + nr_ioapic_registers[i] |
| * sizeof(struct IO_APIC_route_entry); |
| mp_ioapic_data[i] = kmalloc(size, GFP_KERNEL); |
| if (!mp_ioapic_data[i]) { |
| printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); |
| continue; |
| } |
| memset(mp_ioapic_data[i], 0, size); |
| dev = &mp_ioapic_data[i]->dev; |
| dev->id = i; |
| dev->cls = &ioapic_sysdev_class; |
| error = sysdev_register(dev); |
| if (error) { |
| kfree(mp_ioapic_data[i]); |
| mp_ioapic_data[i] = NULL; |
| printk(KERN_ERR "Can't suspend/resume IOAPIC %d\n", i); |
| continue; |
| } |
| } |
| |
| return 0; |
| } |
| |
| device_initcall(ioapic_init_sysfs); |
| |
| /* -------------------------------------------------------------------------- |
| ACPI-based IOAPIC Configuration |
| -------------------------------------------------------------------------- */ |
| |
| #ifdef CONFIG_ACPI |
| |
| int __init io_apic_get_unique_id (int ioapic, int apic_id) |
| { |
| union IO_APIC_reg_00 reg_00; |
| static physid_mask_t apic_id_map = PHYSID_MASK_NONE; |
| physid_mask_t tmp; |
| unsigned long flags; |
| int i = 0; |
| |
| /* |
| * The P4 platform supports up to 256 APIC IDs on two separate APIC |
| * buses (one for LAPICs, one for IOAPICs), where predecessors only |
| * supports up to 16 on one shared APIC bus. |
| * |
| * TBD: Expand LAPIC/IOAPIC support on P4-class systems to take full |
| * advantage of new APIC bus architecture. |
| */ |
| |
| if (physids_empty(apic_id_map)) |
| apic_id_map = ioapic_phys_id_map(phys_cpu_present_map); |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| reg_00.raw = io_apic_read(ioapic, 0); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| if (apic_id >= get_physical_broadcast()) { |
| printk(KERN_WARNING "IOAPIC[%d]: Invalid apic_id %d, trying " |
| "%d\n", ioapic, apic_id, reg_00.bits.ID); |
| apic_id = reg_00.bits.ID; |
| } |
| |
| /* |
| * Every APIC in a system must have a unique ID or we get lots of nice |
| * 'stuck on smp_invalidate_needed IPI wait' messages. |
| */ |
| if (check_apicid_used(apic_id_map, apic_id)) { |
| |
| for (i = 0; i < get_physical_broadcast(); i++) { |
| if (!check_apicid_used(apic_id_map, i)) |
| break; |
| } |
| |
| if (i == get_physical_broadcast()) |
| panic("Max apic_id exceeded!\n"); |
| |
| printk(KERN_WARNING "IOAPIC[%d]: apic_id %d already used, " |
| "trying %d\n", ioapic, apic_id, i); |
| |
| apic_id = i; |
| } |
| |
| tmp = apicid_to_cpu_present(apic_id); |
| physids_or(apic_id_map, apic_id_map, tmp); |
| |
| if (reg_00.bits.ID != apic_id) { |
| reg_00.bits.ID = apic_id; |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(ioapic, 0, reg_00.raw); |
| reg_00.raw = io_apic_read(ioapic, 0); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| /* Sanity check */ |
| if (reg_00.bits.ID != apic_id) |
| panic("IOAPIC[%d]: Unable change apic_id!\n", ioapic); |
| } |
| |
| apic_printk(APIC_VERBOSE, KERN_INFO |
| "IOAPIC[%d]: Assigned apic_id %d\n", ioapic, apic_id); |
| |
| return apic_id; |
| } |
| |
| |
| int __init io_apic_get_version (int ioapic) |
| { |
| union IO_APIC_reg_01 reg_01; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| reg_01.raw = io_apic_read(ioapic, 1); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| return reg_01.bits.version; |
| } |
| |
| |
| int __init io_apic_get_redir_entries (int ioapic) |
| { |
| union IO_APIC_reg_01 reg_01; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| reg_01.raw = io_apic_read(ioapic, 1); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| return reg_01.bits.entries; |
| } |
| |
| |
| int io_apic_set_pci_routing (int ioapic, int pin, int irq, int edge_level, int active_high_low) |
| { |
| struct IO_APIC_route_entry entry; |
| unsigned long flags; |
| |
| if (!IO_APIC_IRQ(irq)) { |
| printk(KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n", |
| ioapic); |
| return -EINVAL; |
| } |
| |
| /* |
| * Generate a PCI IRQ routing entry and program the IOAPIC accordingly. |
| * Note that we mask (disable) IRQs now -- these get enabled when the |
| * corresponding device driver registers for this IRQ. |
| */ |
| |
| memset(&entry,0,sizeof(entry)); |
| |
| entry.delivery_mode = INT_DELIVERY_MODE; |
| entry.dest_mode = INT_DEST_MODE; |
| entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS); |
| entry.trigger = edge_level; |
| entry.polarity = active_high_low; |
| entry.mask = 1; |
| |
| /* |
| * IRQs < 16 are already in the irq_2_pin[] map |
| */ |
| if (irq >= 16) |
| add_pin_to_irq(irq, ioapic, pin); |
| |
| entry.vector = assign_irq_vector(irq); |
| |
| apic_printk(APIC_DEBUG, KERN_DEBUG "IOAPIC[%d]: Set PCI routing entry " |
| "(%d-%d -> 0x%x -> IRQ %d Mode:%i Active:%i)\n", ioapic, |
| mp_ioapics[ioapic].mpc_apicid, pin, entry.vector, irq, |
| edge_level, active_high_low); |
| |
| ioapic_register_intr(irq, entry.vector, edge_level); |
| |
| if (!ioapic && (irq < 16)) |
| disable_8259A_irq(irq); |
| |
| spin_lock_irqsave(&ioapic_lock, flags); |
| io_apic_write(ioapic, 0x11+2*pin, *(((int *)&entry)+1)); |
| io_apic_write(ioapic, 0x10+2*pin, *(((int *)&entry)+0)); |
| set_native_irq_info(use_pci_vector() ? entry.vector : irq, TARGET_CPUS); |
| spin_unlock_irqrestore(&ioapic_lock, flags); |
| |
| return 0; |
| } |
| |
| #endif /* CONFIG_ACPI */ |