| /* |
| * Copyright (C) 2000-2002 Michael Cornwell <cornwell@acm.org> |
| * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org> |
| * Copyright (C) 2001-2002 Klaus Smolin |
| * IBM Storage Technology Division |
| * Copyright (C) 2003-2004, 2007 Bartlomiej Zolnierkiewicz |
| * |
| * The big the bad and the ugly. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/string.h> |
| #include <linux/kernel.h> |
| #include <linux/sched.h> |
| #include <linux/interrupt.h> |
| #include <linux/errno.h> |
| #include <linux/slab.h> |
| #include <linux/delay.h> |
| #include <linux/hdreg.h> |
| #include <linux/ide.h> |
| #include <linux/scatterlist.h> |
| |
| #include <asm/uaccess.h> |
| #include <asm/io.h> |
| |
| void ide_tf_dump(const char *s, struct ide_taskfile *tf) |
| { |
| #ifdef DEBUG |
| printk("%s: tf: feat 0x%02x nsect 0x%02x lbal 0x%02x " |
| "lbam 0x%02x lbah 0x%02x dev 0x%02x cmd 0x%02x\n", |
| s, tf->feature, tf->nsect, tf->lbal, |
| tf->lbam, tf->lbah, tf->device, tf->command); |
| printk("%s: hob: nsect 0x%02x lbal 0x%02x " |
| "lbam 0x%02x lbah 0x%02x\n", |
| s, tf->hob_nsect, tf->hob_lbal, |
| tf->hob_lbam, tf->hob_lbah); |
| #endif |
| } |
| |
| int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) |
| { |
| struct ide_cmd cmd; |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| cmd.tf.nsect = 0x01; |
| if (drive->media == ide_disk) |
| cmd.tf.command = ATA_CMD_ID_ATA; |
| else |
| cmd.tf.command = ATA_CMD_ID_ATAPI; |
| cmd.tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE; |
| cmd.protocol = ATA_PROT_PIO; |
| |
| return ide_raw_taskfile(drive, &cmd, buf, 1); |
| } |
| |
| static ide_startstop_t task_no_data_intr(ide_drive_t *); |
| static ide_startstop_t pre_task_out_intr(ide_drive_t *, struct ide_cmd *); |
| static ide_startstop_t task_pio_intr(ide_drive_t *); |
| |
| ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct ide_cmd *cmd = &hwif->cmd; |
| struct ide_taskfile *tf = &cmd->tf; |
| ide_handler_t *handler = NULL; |
| const struct ide_tp_ops *tp_ops = hwif->tp_ops; |
| const struct ide_dma_ops *dma_ops = hwif->dma_ops; |
| |
| if (orig_cmd->protocol == ATA_PROT_PIO && |
| (orig_cmd->tf_flags & IDE_TFLAG_MULTI_PIO) && |
| drive->mult_count == 0) { |
| printk(KERN_ERR "%s: multimode not set!\n", drive->name); |
| return ide_stopped; |
| } |
| |
| if (orig_cmd->ftf_flags & IDE_FTFLAG_FLAGGED) |
| orig_cmd->ftf_flags |= IDE_FTFLAG_SET_IN_FLAGS; |
| |
| memcpy(cmd, orig_cmd, sizeof(*cmd)); |
| |
| if ((cmd->tf_flags & IDE_TFLAG_DMA_PIO_FALLBACK) == 0) { |
| ide_tf_dump(drive->name, tf); |
| tp_ops->write_devctl(hwif, ATA_DEVCTL_OBS); |
| SELECT_MASK(drive, 0); |
| tp_ops->tf_load(drive, cmd); |
| } |
| |
| switch (cmd->protocol) { |
| case ATA_PROT_PIO: |
| if (cmd->tf_flags & IDE_TFLAG_WRITE) { |
| tp_ops->exec_command(hwif, tf->command); |
| ndelay(400); /* FIXME */ |
| return pre_task_out_intr(drive, cmd); |
| } |
| handler = task_pio_intr; |
| /* fall-through */ |
| case ATA_PROT_NODATA: |
| if (handler == NULL) |
| handler = task_no_data_intr; |
| ide_execute_command(drive, cmd, handler, WAIT_WORSTCASE); |
| return ide_started; |
| case ATA_PROT_DMA: |
| if (ide_dma_prepare(drive, cmd)) |
| return ide_stopped; |
| hwif->expiry = dma_ops->dma_timer_expiry; |
| ide_execute_command(drive, cmd, ide_dma_intr, 2 * WAIT_CMD); |
| dma_ops->dma_start(drive); |
| default: |
| return ide_started; |
| } |
| } |
| EXPORT_SYMBOL_GPL(do_rw_taskfile); |
| |
| static ide_startstop_t task_no_data_intr(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct ide_cmd *cmd = &hwif->cmd; |
| struct ide_taskfile *tf = &cmd->tf; |
| int custom = (cmd->tf_flags & IDE_TFLAG_CUSTOM_HANDLER) ? 1 : 0; |
| int retries = (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) ? 5 : 1; |
| u8 stat; |
| |
| local_irq_enable_in_hardirq(); |
| |
| while (1) { |
| stat = hwif->tp_ops->read_status(hwif); |
| if ((stat & ATA_BUSY) == 0 || retries-- == 0) |
| break; |
| udelay(10); |
| }; |
| |
| if (!OK_STAT(stat, ATA_DRDY, BAD_STAT)) { |
| if (custom && tf->command == ATA_CMD_SET_MULTI) { |
| drive->mult_req = drive->mult_count = 0; |
| drive->special.b.recalibrate = 1; |
| (void)ide_dump_status(drive, __func__, stat); |
| return ide_stopped; |
| } else if (custom && tf->command == ATA_CMD_INIT_DEV_PARAMS) { |
| if ((stat & (ATA_ERR | ATA_DRQ)) == 0) { |
| ide_set_handler(drive, &task_no_data_intr, |
| WAIT_WORSTCASE); |
| return ide_started; |
| } |
| } |
| return ide_error(drive, "task_no_data_intr", stat); |
| } |
| |
| if (custom && tf->command == ATA_CMD_SET_MULTI) |
| drive->mult_count = drive->mult_req; |
| |
| if (custom == 0 || tf->command == ATA_CMD_IDLEIMMEDIATE || |
| tf->command == ATA_CMD_CHK_POWER) { |
| struct request *rq = hwif->rq; |
| |
| if (blk_pm_request(rq)) |
| ide_complete_pm_rq(drive, rq); |
| else |
| ide_finish_cmd(drive, cmd, stat); |
| } |
| |
| return ide_stopped; |
| } |
| |
| static u8 wait_drive_not_busy(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| int retries; |
| u8 stat; |
| |
| /* |
| * Last sector was transfered, wait until device is ready. This can |
| * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms. |
| */ |
| for (retries = 0; retries < 1000; retries++) { |
| stat = hwif->tp_ops->read_status(hwif); |
| |
| if (stat & ATA_BUSY) |
| udelay(10); |
| else |
| break; |
| } |
| |
| if (stat & ATA_BUSY) |
| printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); |
| |
| return stat; |
| } |
| |
| void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd, |
| unsigned int write, unsigned int len) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct scatterlist *sg = hwif->sg_table; |
| struct scatterlist *cursg = cmd->cursg; |
| struct page *page; |
| unsigned long flags; |
| unsigned int offset; |
| u8 *buf; |
| |
| cursg = cmd->cursg; |
| if (cursg == NULL) |
| cursg = cmd->cursg = sg; |
| |
| while (len) { |
| unsigned nr_bytes = min(len, cursg->length - cmd->cursg_ofs); |
| |
| if (nr_bytes > PAGE_SIZE) |
| nr_bytes = PAGE_SIZE; |
| |
| page = sg_page(cursg); |
| offset = cursg->offset + cmd->cursg_ofs; |
| |
| /* get the current page and offset */ |
| page = nth_page(page, (offset >> PAGE_SHIFT)); |
| offset %= PAGE_SIZE; |
| |
| if (PageHighMem(page)) |
| local_irq_save(flags); |
| |
| buf = kmap_atomic(page, KM_BIO_SRC_IRQ) + offset; |
| |
| cmd->nleft -= nr_bytes; |
| cmd->cursg_ofs += nr_bytes; |
| |
| if (cmd->cursg_ofs == cursg->length) { |
| cursg = cmd->cursg = sg_next(cmd->cursg); |
| cmd->cursg_ofs = 0; |
| } |
| |
| /* do the actual data transfer */ |
| if (write) |
| hwif->tp_ops->output_data(drive, cmd, buf, nr_bytes); |
| else |
| hwif->tp_ops->input_data(drive, cmd, buf, nr_bytes); |
| |
| kunmap_atomic(buf, KM_BIO_SRC_IRQ); |
| |
| if (PageHighMem(page)) |
| local_irq_restore(flags); |
| |
| len -= nr_bytes; |
| } |
| } |
| EXPORT_SYMBOL_GPL(ide_pio_bytes); |
| |
| static void ide_pio_datablock(ide_drive_t *drive, struct ide_cmd *cmd, |
| unsigned int write) |
| { |
| unsigned int nr_bytes; |
| |
| u8 saved_io_32bit = drive->io_32bit; |
| |
| if (cmd->tf_flags & IDE_TFLAG_FS) |
| cmd->rq->errors = 0; |
| |
| if (cmd->tf_flags & IDE_TFLAG_IO_16BIT) |
| drive->io_32bit = 0; |
| |
| touch_softlockup_watchdog(); |
| |
| if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) |
| nr_bytes = min_t(unsigned, cmd->nleft, drive->mult_count << 9); |
| else |
| nr_bytes = SECTOR_SIZE; |
| |
| ide_pio_bytes(drive, cmd, write, nr_bytes); |
| |
| drive->io_32bit = saved_io_32bit; |
| } |
| |
| static void ide_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd) |
| { |
| if (cmd->tf_flags & IDE_TFLAG_FS) { |
| int nr_bytes = cmd->nbytes - cmd->nleft; |
| |
| if (cmd->protocol == ATA_PROT_PIO && |
| ((cmd->tf_flags & IDE_TFLAG_WRITE) || cmd->nleft == 0)) { |
| if (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) |
| nr_bytes -= drive->mult_count << 9; |
| else |
| nr_bytes -= SECTOR_SIZE; |
| } |
| |
| if (nr_bytes > 0) |
| ide_complete_rq(drive, 0, nr_bytes); |
| } |
| } |
| |
| void ide_finish_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat) |
| { |
| struct request *rq = drive->hwif->rq; |
| u8 err = ide_read_error(drive); |
| |
| ide_complete_cmd(drive, cmd, stat, err); |
| rq->errors = err; |
| ide_complete_rq(drive, err ? -EIO : 0, blk_rq_bytes(rq)); |
| } |
| |
| /* |
| * Handler for command with PIO data phase. |
| */ |
| static ide_startstop_t task_pio_intr(ide_drive_t *drive) |
| { |
| ide_hwif_t *hwif = drive->hwif; |
| struct ide_cmd *cmd = &drive->hwif->cmd; |
| u8 stat = hwif->tp_ops->read_status(hwif); |
| u8 write = !!(cmd->tf_flags & IDE_TFLAG_WRITE); |
| |
| if (write == 0) { |
| /* Error? */ |
| if (stat & ATA_ERR) |
| goto out_err; |
| |
| /* Didn't want any data? Odd. */ |
| if ((stat & ATA_DRQ) == 0) { |
| /* Command all done? */ |
| if (OK_STAT(stat, ATA_DRDY, ATA_BUSY)) |
| goto out_end; |
| |
| /* Assume it was a spurious irq */ |
| goto out_wait; |
| } |
| } else { |
| if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) |
| goto out_err; |
| |
| /* Deal with unexpected ATA data phase. */ |
| if (((stat & ATA_DRQ) == 0) ^ (cmd->nleft == 0)) |
| goto out_err; |
| } |
| |
| if (write && cmd->nleft == 0) |
| goto out_end; |
| |
| /* Still data left to transfer. */ |
| ide_pio_datablock(drive, cmd, write); |
| |
| /* Are we done? Check status and finish transfer. */ |
| if (write == 0 && cmd->nleft == 0) { |
| stat = wait_drive_not_busy(drive); |
| if (!OK_STAT(stat, 0, BAD_STAT)) |
| goto out_err; |
| |
| goto out_end; |
| } |
| out_wait: |
| /* Still data left to transfer. */ |
| ide_set_handler(drive, &task_pio_intr, WAIT_WORSTCASE); |
| return ide_started; |
| out_end: |
| if ((cmd->tf_flags & IDE_TFLAG_FS) == 0) |
| ide_finish_cmd(drive, cmd, stat); |
| else |
| ide_complete_rq(drive, 0, cmd->rq->nr_sectors << 9); |
| return ide_stopped; |
| out_err: |
| ide_error_cmd(drive, cmd); |
| return ide_error(drive, __func__, stat); |
| } |
| |
| static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, |
| struct ide_cmd *cmd) |
| { |
| ide_startstop_t startstop; |
| |
| if (ide_wait_stat(&startstop, drive, ATA_DRQ, |
| drive->bad_wstat, WAIT_DRQ)) { |
| printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n", |
| drive->name, |
| (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) ? "MULT" : "", |
| (drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : ""); |
| return startstop; |
| } |
| |
| if ((drive->dev_flags & IDE_DFLAG_UNMASK) == 0) |
| local_irq_disable(); |
| |
| ide_set_handler(drive, &task_pio_intr, WAIT_WORSTCASE); |
| |
| ide_pio_datablock(drive, cmd, 1); |
| |
| return ide_started; |
| } |
| |
| int ide_raw_taskfile(ide_drive_t *drive, struct ide_cmd *cmd, u8 *buf, |
| u16 nsect) |
| { |
| struct request *rq; |
| int error; |
| |
| rq = blk_get_request(drive->queue, READ, __GFP_WAIT); |
| rq->cmd_type = REQ_TYPE_ATA_TASKFILE; |
| rq->buffer = buf; |
| |
| /* |
| * (ks) We transfer currently only whole sectors. |
| * This is suffient for now. But, it would be great, |
| * if we would find a solution to transfer any size. |
| * To support special commands like READ LONG. |
| */ |
| rq->hard_nr_sectors = rq->nr_sectors = nsect; |
| rq->hard_cur_sectors = rq->current_nr_sectors = nsect; |
| |
| if (cmd->tf_flags & IDE_TFLAG_WRITE) |
| rq->cmd_flags |= REQ_RW; |
| |
| rq->special = cmd; |
| cmd->rq = rq; |
| |
| error = blk_execute_rq(drive->queue, NULL, rq, 0); |
| blk_put_request(rq); |
| |
| return error; |
| } |
| |
| EXPORT_SYMBOL(ide_raw_taskfile); |
| |
| int ide_no_data_taskfile(ide_drive_t *drive, struct ide_cmd *cmd) |
| { |
| cmd->protocol = ATA_PROT_NODATA; |
| |
| return ide_raw_taskfile(drive, cmd, NULL, 0); |
| } |
| EXPORT_SYMBOL_GPL(ide_no_data_taskfile); |
| |
| #ifdef CONFIG_IDE_TASK_IOCTL |
| int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) |
| { |
| ide_task_request_t *req_task; |
| struct ide_cmd cmd; |
| u8 *outbuf = NULL; |
| u8 *inbuf = NULL; |
| u8 *data_buf = NULL; |
| int err = 0; |
| int tasksize = sizeof(struct ide_task_request_s); |
| unsigned int taskin = 0; |
| unsigned int taskout = 0; |
| u16 nsect = 0; |
| char __user *buf = (char __user *)arg; |
| |
| // printk("IDE Taskfile ...\n"); |
| |
| req_task = kzalloc(tasksize, GFP_KERNEL); |
| if (req_task == NULL) return -ENOMEM; |
| if (copy_from_user(req_task, buf, tasksize)) { |
| kfree(req_task); |
| return -EFAULT; |
| } |
| |
| taskout = req_task->out_size; |
| taskin = req_task->in_size; |
| |
| if (taskin > 65536 || taskout > 65536) { |
| err = -EINVAL; |
| goto abort; |
| } |
| |
| if (taskout) { |
| int outtotal = tasksize; |
| outbuf = kzalloc(taskout, GFP_KERNEL); |
| if (outbuf == NULL) { |
| err = -ENOMEM; |
| goto abort; |
| } |
| if (copy_from_user(outbuf, buf + outtotal, taskout)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| |
| if (taskin) { |
| int intotal = tasksize + taskout; |
| inbuf = kzalloc(taskin, GFP_KERNEL); |
| if (inbuf == NULL) { |
| err = -ENOMEM; |
| goto abort; |
| } |
| if (copy_from_user(inbuf, buf + intotal, taskin)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| |
| memset(&cmd, 0, sizeof(cmd)); |
| |
| memcpy(&cmd.tf_array[0], req_task->hob_ports, |
| HDIO_DRIVE_HOB_HDR_SIZE - 2); |
| memcpy(&cmd.tf_array[6], req_task->io_ports, |
| HDIO_DRIVE_TASK_HDR_SIZE); |
| |
| cmd.tf_flags = IDE_TFLAG_IO_16BIT | IDE_TFLAG_DEVICE | |
| IDE_TFLAG_IN_TF; |
| |
| if (drive->dev_flags & IDE_DFLAG_LBA48) |
| cmd.tf_flags |= (IDE_TFLAG_LBA48 | IDE_TFLAG_IN_HOB); |
| |
| if (req_task->out_flags.all) { |
| cmd.ftf_flags |= IDE_FTFLAG_FLAGGED; |
| |
| if (req_task->out_flags.b.data) |
| cmd.ftf_flags |= IDE_FTFLAG_OUT_DATA; |
| |
| if (req_task->out_flags.b.nsector_hob) |
| cmd.tf_flags |= IDE_TFLAG_OUT_HOB_NSECT; |
| if (req_task->out_flags.b.sector_hob) |
| cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAL; |
| if (req_task->out_flags.b.lcyl_hob) |
| cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAM; |
| if (req_task->out_flags.b.hcyl_hob) |
| cmd.tf_flags |= IDE_TFLAG_OUT_HOB_LBAH; |
| |
| if (req_task->out_flags.b.error_feature) |
| cmd.tf_flags |= IDE_TFLAG_OUT_FEATURE; |
| if (req_task->out_flags.b.nsector) |
| cmd.tf_flags |= IDE_TFLAG_OUT_NSECT; |
| if (req_task->out_flags.b.sector) |
| cmd.tf_flags |= IDE_TFLAG_OUT_LBAL; |
| if (req_task->out_flags.b.lcyl) |
| cmd.tf_flags |= IDE_TFLAG_OUT_LBAM; |
| if (req_task->out_flags.b.hcyl) |
| cmd.tf_flags |= IDE_TFLAG_OUT_LBAH; |
| } else { |
| cmd.tf_flags |= IDE_TFLAG_OUT_TF; |
| if (cmd.tf_flags & IDE_TFLAG_LBA48) |
| cmd.tf_flags |= IDE_TFLAG_OUT_HOB; |
| } |
| |
| if (req_task->in_flags.b.data) |
| cmd.ftf_flags |= IDE_FTFLAG_IN_DATA; |
| |
| if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE) { |
| /* fixup data phase if needed */ |
| if (req_task->data_phase == TASKFILE_IN_DMAQ || |
| req_task->data_phase == TASKFILE_IN_DMA) |
| cmd.tf_flags |= IDE_TFLAG_WRITE; |
| } |
| |
| cmd.protocol = ATA_PROT_DMA; |
| |
| switch (req_task->data_phase) { |
| case TASKFILE_MULTI_OUT: |
| if (!drive->mult_count) { |
| /* (hs): give up if multcount is not set */ |
| printk(KERN_ERR "%s: %s Multimode Write " \ |
| "multcount is not set\n", |
| drive->name, __func__); |
| err = -EPERM; |
| goto abort; |
| } |
| cmd.tf_flags |= IDE_TFLAG_MULTI_PIO; |
| /* fall through */ |
| case TASKFILE_OUT: |
| cmd.protocol = ATA_PROT_PIO; |
| /* fall through */ |
| case TASKFILE_OUT_DMAQ: |
| case TASKFILE_OUT_DMA: |
| cmd.tf_flags |= IDE_TFLAG_WRITE; |
| nsect = taskout / SECTOR_SIZE; |
| data_buf = outbuf; |
| break; |
| case TASKFILE_MULTI_IN: |
| if (!drive->mult_count) { |
| /* (hs): give up if multcount is not set */ |
| printk(KERN_ERR "%s: %s Multimode Read failure " \ |
| "multcount is not set\n", |
| drive->name, __func__); |
| err = -EPERM; |
| goto abort; |
| } |
| cmd.tf_flags |= IDE_TFLAG_MULTI_PIO; |
| /* fall through */ |
| case TASKFILE_IN: |
| cmd.protocol = ATA_PROT_PIO; |
| /* fall through */ |
| case TASKFILE_IN_DMAQ: |
| case TASKFILE_IN_DMA: |
| nsect = taskin / SECTOR_SIZE; |
| data_buf = inbuf; |
| break; |
| case TASKFILE_NO_DATA: |
| cmd.protocol = ATA_PROT_NODATA; |
| break; |
| default: |
| err = -EFAULT; |
| goto abort; |
| } |
| |
| if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA) |
| nsect = 0; |
| else if (!nsect) { |
| nsect = (cmd.tf.hob_nsect << 8) | cmd.tf.nsect; |
| |
| if (!nsect) { |
| printk(KERN_ERR "%s: in/out command without data\n", |
| drive->name); |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| |
| err = ide_raw_taskfile(drive, &cmd, data_buf, nsect); |
| |
| memcpy(req_task->hob_ports, &cmd.tf_array[0], |
| HDIO_DRIVE_HOB_HDR_SIZE - 2); |
| memcpy(req_task->io_ports, &cmd.tf_array[6], |
| HDIO_DRIVE_TASK_HDR_SIZE); |
| |
| if ((cmd.ftf_flags & IDE_FTFLAG_SET_IN_FLAGS) && |
| req_task->in_flags.all == 0) { |
| req_task->in_flags.all = IDE_TASKFILE_STD_IN_FLAGS; |
| if (drive->dev_flags & IDE_DFLAG_LBA48) |
| req_task->in_flags.all |= (IDE_HOB_STD_IN_FLAGS << 8); |
| } |
| |
| if (copy_to_user(buf, req_task, tasksize)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| if (taskout) { |
| int outtotal = tasksize; |
| if (copy_to_user(buf + outtotal, outbuf, taskout)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| if (taskin) { |
| int intotal = tasksize + taskout; |
| if (copy_to_user(buf + intotal, inbuf, taskin)) { |
| err = -EFAULT; |
| goto abort; |
| } |
| } |
| abort: |
| kfree(req_task); |
| kfree(outbuf); |
| kfree(inbuf); |
| |
| // printk("IDE Taskfile ioctl ended. rc = %i\n", err); |
| |
| return err; |
| } |
| #endif |