blob: d7359ffbcbdd325b32bebd1aed3aea02bdd5d8ef [file] [log] [blame]
/*
* OpenRISC setup.c
*
* Linux architectural port borrowing liberally from similar works of
* others. All original copyrights apply as per the original source
* declaration.
*
* Modifications for the OpenRISC architecture:
* Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
* Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* This file handles the architecture-dependent parts of initialization
*/
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/stddef.h>
#include <linux/unistd.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/console.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/seq_file.h>
#include <linux/serial.h>
#include <linux/initrd.h>
#include <linux/of_fdt.h>
#include <linux/of.h>
#include <linux/memblock.h>
#include <linux/device.h>
#include <linux/of_platform.h>
#include <asm/segment.h>
#include <asm/pgtable.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/io.h>
#include <asm/cpuinfo.h>
#include <asm/delay.h>
#include "vmlinux.h"
char __initdata cmd_line[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
static unsigned long __init setup_memory(void)
{
unsigned long bootmap_size;
unsigned long ram_start_pfn;
unsigned long free_ram_start_pfn;
unsigned long ram_end_pfn;
phys_addr_t memory_start, memory_end;
struct memblock_region *region;
memory_end = memory_start = 0;
/* Find main memory where is the kernel */
for_each_memblock(memory, region) {
memory_start = region->base;
memory_end = region->base + region->size;
printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
memory_start, memory_end);
}
if (!memory_end) {
panic("No memory!");
}
ram_start_pfn = PFN_UP(memory_start);
/* free_ram_start_pfn is first page after kernel */
free_ram_start_pfn = PFN_UP(__pa(&_end));
ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM());
max_pfn = ram_end_pfn;
/*
* initialize the boot-time allocator (with low memory only).
*
* This makes the memory from the end of the kernel to the end of
* RAM usable.
* init_bootmem sets the global values min_low_pfn, max_low_pfn.
*/
bootmap_size = init_bootmem(free_ram_start_pfn,
ram_end_pfn - ram_start_pfn);
free_bootmem(PFN_PHYS(free_ram_start_pfn),
(ram_end_pfn - free_ram_start_pfn) << PAGE_SHIFT);
reserve_bootmem(PFN_PHYS(free_ram_start_pfn), bootmap_size,
BOOTMEM_DEFAULT);
for_each_memblock(reserved, region) {
printk(KERN_INFO "Reserved - 0x%08x-0x%08x\n",
(u32) region->base, (u32) region->size);
reserve_bootmem(region->base, region->size, BOOTMEM_DEFAULT);
}
return ram_end_pfn;
}
struct cpuinfo cpuinfo;
static void print_cpuinfo(void)
{
unsigned long upr = mfspr(SPR_UPR);
unsigned long vr = mfspr(SPR_VR);
unsigned int version;
unsigned int revision;
version = (vr & SPR_VR_VER) >> 24;
revision = (vr & SPR_VR_REV);
printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
version, revision, cpuinfo.clock_frequency / 1000000);
if (!(upr & SPR_UPR_UP)) {
printk(KERN_INFO
"-- no UPR register... unable to detect configuration\n");
return;
}
if (upr & SPR_UPR_DCP)
printk(KERN_INFO
"-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n",
cpuinfo.dcache_size, cpuinfo.dcache_block_size, 1);
else
printk(KERN_INFO "-- dcache disabled\n");
if (upr & SPR_UPR_ICP)
printk(KERN_INFO
"-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n",
cpuinfo.icache_size, cpuinfo.icache_block_size, 1);
else
printk(KERN_INFO "-- icache disabled\n");
if (upr & SPR_UPR_DMP)
printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW));
if (upr & SPR_UPR_IMP)
printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW));
printk(KERN_INFO "-- additional features:\n");
if (upr & SPR_UPR_DUP)
printk(KERN_INFO "-- debug unit\n");
if (upr & SPR_UPR_PCUP)
printk(KERN_INFO "-- performance counters\n");
if (upr & SPR_UPR_PMP)
printk(KERN_INFO "-- power management\n");
if (upr & SPR_UPR_PICP)
printk(KERN_INFO "-- PIC\n");
if (upr & SPR_UPR_TTP)
printk(KERN_INFO "-- timer\n");
if (upr & SPR_UPR_CUP)
printk(KERN_INFO "-- custom unit(s)\n");
}
void __init setup_cpuinfo(void)
{
struct device_node *cpu;
unsigned long iccfgr, dccfgr;
unsigned long cache_set_size, cache_ways;
cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
if (!cpu)
panic("No compatible CPU found in device tree...\n");
iccfgr = mfspr(SPR_ICCFGR);
cache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW);
cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3);
cpuinfo.icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7);
cpuinfo.icache_size =
cache_set_size * cache_ways * cpuinfo.icache_block_size;
dccfgr = mfspr(SPR_DCCFGR);
cache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW);
cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3);
cpuinfo.dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7);
cpuinfo.dcache_size =
cache_set_size * cache_ways * cpuinfo.dcache_block_size;
if (of_property_read_u32(cpu, "clock-frequency",
&cpuinfo.clock_frequency)) {
printk(KERN_WARNING
"Device tree missing CPU 'clock-frequency' parameter."
"Assuming frequency 25MHZ"
"This is probably not what you want.");
}
of_node_put(cpu);
print_cpuinfo();
}
/**
* or32_early_setup
*
* Handles the pointer to the device tree that this kernel is to use
* for establishing the available platform devices.
*
* Falls back on built-in device tree in case null pointer is passed.
*/
void __init or32_early_setup(unsigned int fdt)
{
if (fdt) {
early_init_devtree((void*) fdt);
printk(KERN_INFO "FDT at 0x%08x\n", fdt);
} else {
early_init_devtree(__dtb_start);
printk(KERN_INFO "Compiled-in FDT at %p\n", __dtb_start);
}
}
static int __init openrisc_device_probe(void)
{
of_platform_populate(NULL, NULL, NULL, NULL);
return 0;
}
device_initcall(openrisc_device_probe);
static inline unsigned long extract_value_bits(unsigned long reg,
short bit_nr, short width)
{
return (reg >> bit_nr) & (0 << width);
}
static inline unsigned long extract_value(unsigned long reg, unsigned long mask)
{
while (!(mask & 0x1)) {
reg = reg >> 1;
mask = mask >> 1;
}
return mask & reg;
}
void __init detect_unit_config(unsigned long upr, unsigned long mask,
char *text, void (*func) (void))
{
if (text != NULL)
printk("%s", text);
if (upr & mask) {
if (func != NULL)
func();
else
printk("present\n");
} else
printk("not present\n");
}
/*
* calibrate_delay
*
* Lightweight calibrate_delay implementation that calculates loops_per_jiffy
* from the clock frequency passed in via the device tree
*
*/
void calibrate_delay(void)
{
const int *val;
struct device_node *cpu = NULL;
cpu = of_find_compatible_node(NULL, NULL, "opencores,or1200-rtlsvn481");
val = of_get_property(cpu, "clock-frequency", NULL);
if (!val)
panic("no cpu 'clock-frequency' parameter in device tree");
loops_per_jiffy = *val / HZ;
pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n",
loops_per_jiffy / (500000 / HZ),
(loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy);
}
void __init setup_arch(char **cmdline_p)
{
unsigned long max_low_pfn;
unflatten_device_tree();
setup_cpuinfo();
/* process 1's initial memory region is the kernel code/data */
init_mm.start_code = (unsigned long)&_stext;
init_mm.end_code = (unsigned long)&_etext;
init_mm.end_data = (unsigned long)&_edata;
init_mm.brk = (unsigned long)&_end;
#ifdef CONFIG_BLK_DEV_INITRD
initrd_start = (unsigned long)&__initrd_start;
initrd_end = (unsigned long)&__initrd_end;
if (initrd_start == initrd_end) {
initrd_start = 0;
initrd_end = 0;
}
initrd_below_start_ok = 1;
#endif
/* setup bootmem allocator */
max_low_pfn = setup_memory();
/* paging_init() sets up the MMU and marks all pages as reserved */
paging_init();
#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
if (!conswitchp)
conswitchp = &dummy_con;
#endif
*cmdline_p = cmd_line;
printk(KERN_INFO "OpenRISC Linux -- http://openrisc.net\n");
}
static int show_cpuinfo(struct seq_file *m, void *v)
{
unsigned long vr;
int version, revision;
vr = mfspr(SPR_VR);
version = (vr & SPR_VR_VER) >> 24;
revision = vr & SPR_VR_REV;
return seq_printf(m,
"cpu\t\t: OpenRISC-%x\n"
"revision\t: %d\n"
"frequency\t: %ld\n"
"dcache size\t: %d bytes\n"
"dcache block size\t: %d bytes\n"
"icache size\t: %d bytes\n"
"icache block size\t: %d bytes\n"
"immu\t\t: %d entries, %lu ways\n"
"dmmu\t\t: %d entries, %lu ways\n"
"bogomips\t: %lu.%02lu\n",
version,
revision,
loops_per_jiffy * HZ,
cpuinfo.dcache_size,
cpuinfo.dcache_block_size,
cpuinfo.icache_size,
cpuinfo.icache_block_size,
1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2),
1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW),
1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2),
1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW),
(loops_per_jiffy * HZ) / 500000,
((loops_per_jiffy * HZ) / 5000) % 100);
}
static void *c_start(struct seq_file *m, loff_t * pos)
{
/* We only have one CPU... */
return *pos < 1 ? (void *)1 : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t * pos)
{
++*pos;
return NULL;
}
static void c_stop(struct seq_file *m, void *v)
{
}
const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};