| config EMBEDDED6xx |
| bool "Embedded 6xx/7xx/7xxx-based boards" |
| depends on 6xx && BROKEN_ON_SMP |
| |
| config LINKSTATION |
| bool "Linkstation / Kurobox(HG) from Buffalo" |
| depends on EMBEDDED6xx |
| select MPIC |
| select FSL_SOC |
| select PPC_UDBG_16550 if SERIAL_8250 |
| select DEFAULT_UIMAGE |
| select MPC10X_OPENPIC |
| select MPC10X_BRIDGE |
| help |
| Select LINKSTATION if configuring for one of PPC- (MPC8241) |
| based NAS systems from Buffalo Technology. So far only |
| KuroboxHG has been tested. In the future classical Kurobox, |
| Linkstation-I HD-HLAN and HD-HGLAN versions, and PPC-based |
| Terastation systems should be supported too. |
| |
| config STORCENTER |
| bool "IOMEGA StorCenter" |
| depends on EMBEDDED6xx |
| select MPIC |
| select FSL_SOC |
| select PPC_UDBG_16550 if SERIAL_8250 |
| select MPC10X_OPENPIC |
| select MPC10X_BRIDGE |
| help |
| Select STORCENTER if configuring for the iomega StorCenter |
| with an 8241 CPU in it. |
| |
| config MPC7448HPC2 |
| bool "Freescale MPC7448HPC2(Taiga)" |
| depends on EMBEDDED6xx |
| select TSI108_BRIDGE |
| select DEFAULT_UIMAGE |
| select PPC_UDBG_16550 |
| select TSI108_BRIDGE |
| help |
| Select MPC7448HPC2 if configuring for Freescale MPC7448HPC2 (Taiga) |
| platform |
| |
| config PPC_HOLLY |
| bool "PPC750GX/CL with TSI10x bridge (Hickory/Holly)" |
| depends on EMBEDDED6xx |
| select TSI108_BRIDGE |
| select PPC_UDBG_16550 |
| select TSI108_BRIDGE |
| help |
| Select PPC_HOLLY if configuring for an IBM 750GX/CL Eval |
| Board with TSI108/9 bridge (Hickory/Holly) |
| |
| config PPC_PRPMC2800 |
| bool "Motorola-PrPMC2800" |
| depends on EMBEDDED6xx |
| select MV64X60 |
| select NOT_COHERENT_CACHE |
| help |
| This option enables support for the Motorola PrPMC2800 board |
| |
| config PPC_C2K |
| bool "SBS/GEFanuc C2K board" |
| depends on EMBEDDED6xx |
| select MV64X60 |
| select NOT_COHERENT_CACHE |
| select MTD_CFI_I4 |
| help |
| This option enables support for the GE Fanuc C2K board (formerly |
| an SBS board). |
| |
| config TSI108_BRIDGE |
| bool |
| select PCI |
| select MPIC |
| select MPIC_WEIRD |
| |
| config MPC10X_BRIDGE |
| bool |
| select PPC_INDIRECT_PCI |
| |
| config MV64X60 |
| bool |
| select PPC_INDIRECT_PCI |
| select CHECK_CACHE_COHERENCY |
| |
| config MPC10X_OPENPIC |
| bool |
| |
| config MPC10X_STORE_GATHERING |
| bool "Enable MPC10x store gathering" |
| depends on MPC10X_BRIDGE |
| |
| config GAMECUBE_COMMON |
| bool |
| |
| config USBGECKO_UDBG |
| bool "USB Gecko udbg console for the Nintendo GameCube/Wii" |
| depends on GAMECUBE_COMMON |
| help |
| If you say yes to this option, support will be included for the |
| USB Gecko adapter as an udbg console. |
| The USB Gecko is a EXI to USB Serial converter that can be plugged |
| into a memcard slot in the Nintendo GameCube/Wii. |
| |
| This driver bypasses the EXI layer completely. |
| |
| If in doubt, say N here. |
| |
| config GAMECUBE |
| bool "Nintendo-GameCube" |
| depends on EMBEDDED6xx |
| select GAMECUBE_COMMON |
| help |
| Select GAMECUBE if configuring for the Nintendo GameCube. |
| More information at: <http://gc-linux.sourceforge.net/> |
| |
| config WII |
| bool "Nintendo-Wii" |
| depends on EMBEDDED6xx |
| select GAMECUBE_COMMON |
| help |
| Select WII if configuring for the Nintendo Wii. |
| More information at: <http://gc-linux.sourceforge.net/> |
| |
